From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>,
netdev@vger.kernel.org, gospo@redhat.com, sassmann@redhat.com,
Hannes Frederic Sowa <hannes@stressinduktion.org>,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next v2 07/14] i40e: fix use of untrusted scalar value warning
Date: Tue, 22 Oct 2013 07:22:30 -0700 [thread overview]
Message-ID: <1382451757-9817-8-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <1382451757-9817-1-git-send-email-jeffrey.t.kirsher@intel.com>
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
This is a fix for an issue reported by coverity, reported by
Hannes Frederic Sowa.
I'm unable to test if this patch actually fixes the coverity
reported issue, feedback is welcome.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: Hannes Frederic Sowa <hannes@stressinduktion.org>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/i40e/i40e_debugfs.c | 34 ++++++++++++++------------
1 file changed, 18 insertions(+), 16 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
index c80fcb4..387bf94 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
@@ -151,9 +151,7 @@ static ssize_t i40e_dbg_dump_write(struct file *filp,
size_t count, loff_t *ppos)
{
struct i40e_pf *pf = filp->private_data;
- char dump_request_buf[16];
bool seid_found = false;
- int bytes_not_copied;
long seid = -1;
int buflen = 0;
int i, ret;
@@ -163,21 +161,12 @@ static ssize_t i40e_dbg_dump_write(struct file *filp,
/* don't allow partial writes */
if (*ppos != 0)
return 0;
- if (count >= sizeof(dump_request_buf))
- return -ENOSPC;
-
- bytes_not_copied = copy_from_user(dump_request_buf, buffer, count);
- if (bytes_not_copied < 0)
- return bytes_not_copied;
- if (bytes_not_copied > 0)
- count -= bytes_not_copied;
- dump_request_buf[count] = '\0';
/* decode the SEID given to be dumped */
- ret = kstrtol(dump_request_buf, 0, &seid);
- if (ret < 0) {
- dev_info(&pf->pdev->dev, "bad seid value '%s'\n",
- dump_request_buf);
+ ret = kstrtol_from_user(buffer, count, 0, &seid);
+
+ if (ret) {
+ dev_info(&pf->pdev->dev, "bad seid value\n");
} else if (seid == 0) {
seid_found = true;
@@ -1023,11 +1012,11 @@ static ssize_t i40e_dbg_command_write(struct file *filp,
size_t count, loff_t *ppos)
{
struct i40e_pf *pf = filp->private_data;
+ char *cmd_buf, *cmd_buf_tmp;
int bytes_not_copied;
struct i40e_vsi *vsi;
u8 *print_buf_start;
u8 *print_buf;
- char *cmd_buf;
int vsi_seid;
int veb_seid;
int cnt;
@@ -1046,6 +1035,12 @@ static ssize_t i40e_dbg_command_write(struct file *filp,
count -= bytes_not_copied;
cmd_buf[count] = '\0';
+ cmd_buf_tmp = strchr(cmd_buf, '\n');
+ if (cmd_buf_tmp) {
+ *cmd_buf_tmp = '\0';
+ count = cmd_buf_tmp - cmd_buf + 1;
+ }
+
print_buf_start = kzalloc(I40E_MAX_DEBUG_OUT_BUFFER, GFP_KERNEL);
if (!print_buf_start)
goto command_write_done;
@@ -1900,6 +1895,7 @@ static ssize_t i40e_dbg_netdev_ops_write(struct file *filp,
struct i40e_pf *pf = filp->private_data;
int bytes_not_copied;
struct i40e_vsi *vsi;
+ char *buf_tmp;
int vsi_seid;
int i, cnt;
@@ -1918,6 +1914,12 @@ static ssize_t i40e_dbg_netdev_ops_write(struct file *filp,
count -= bytes_not_copied;
i40e_dbg_netdev_ops_buf[count] = '\0';
+ buf_tmp = strchr(i40e_dbg_netdev_ops_buf, '\n');
+ if (buf_tmp) {
+ *buf_tmp = '\0';
+ count = buf_tmp - i40e_dbg_netdev_ops_buf + 1;
+ }
+
if (strncmp(i40e_dbg_netdev_ops_buf, "tx_timeout", 10) == 0) {
cnt = sscanf(&i40e_dbg_netdev_ops_buf[11], "%i", &vsi_seid);
if (cnt != 1) {
--
1.8.3.1
next prev parent reply other threads:[~2013-10-22 14:22 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-22 14:22 [net-next v2 00/14][pull request] Intel Wired LAN Driver Updates Jeff Kirsher
2013-10-22 14:22 ` [net-next v2 01/14] i40e: do not flush after re-enabling interrupts Jeff Kirsher
2013-10-22 14:22 ` [net-next v2 02/14] i40e: don't free nonexistent rings Jeff Kirsher
2013-10-22 14:22 ` [net-next v2 03/14] i40e: assign correct vector to VF Jeff Kirsher
2013-10-22 14:22 ` [net-next v2 04/14] i40e: fixup legacy interrupt handling Jeff Kirsher
2013-10-22 14:22 ` [net-next v2 05/14] i40e: debugfs fixups Jeff Kirsher
2013-10-22 14:22 ` [net-next v2 06/14] i40e: clamp debugfs nvm read command Jeff Kirsher
2013-10-22 14:22 ` Jeff Kirsher [this message]
2013-10-22 14:22 ` [net-next v2 08/14] i40e: fix sign extension issue Jeff Kirsher
2013-10-22 14:22 ` [net-next v2 09/14] i40e: refactor fdir setup function Jeff Kirsher
2013-10-22 14:22 ` [net-next v2 10/14] i40e: tweaking icr0 handling for legacy irq Jeff Kirsher
2013-10-22 14:22 ` [net-next v2 11/14] i40e: reorder block declarations in debugfs Jeff Kirsher
2013-10-22 14:22 ` [net-next v2 12/14] i40e: check vsi ptrs before dumping them Jeff Kirsher
2013-10-22 14:22 ` [net-next v2 13/14] i40e: use pf_id for pf function id in qtx_ctl Jeff Kirsher
2013-10-22 14:22 ` [net-next v2 14/14] i40e: Bump version Jeff Kirsher
2013-10-22 19:53 ` [net-next v2 00/14][pull request] Intel Wired LAN Driver Updates David Miller
2013-10-22 20:00 ` Jeff Kirsher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1382451757-9817-8-git-send-email-jeffrey.t.kirsher@intel.com \
--to=jeffrey.t.kirsher@intel.com \
--cc=davem@davemloft.net \
--cc=gospo@redhat.com \
--cc=hannes@stressinduktion.org \
--cc=jesse.brandeburg@intel.com \
--cc=netdev@vger.kernel.org \
--cc=sassmann@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).