From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
To: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>,
Fabio Estevam <fabio.estevam@freescale.com>,
Frank Li <frank.li@freescale.net>,
Fugang Duan <B38611@freescale.com>,
Jim Baxter <jim_baxter@mentor.com>,
Marek Szyprowski <m.szyprowski@samsung.com>,
Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Subject: [PATCH] net: fec_main: dma_map() only the length of the skb
Date: Wed, 27 Nov 2013 13:44:13 +0100 [thread overview]
Message-ID: <1385556253-4130-1-git-send-email-bigeasy@linutronix.de> (raw)
On tx submit the driver always dma_map_single() FEC_ENET_TX_FRSIZE (=2048)
bytes. This works because we don't overwrite any memory after the data buffer,
we remove it from cache if it was there. So we hurt performace in case the
mapping of a smaller area makes a difference.
There is also a bug: If the data area starts shortly before the end of
RAM say 0xc7fffa10 and the RAM ends at 0xc8000000 then we have enough
space to fit the data area (according to skb->len) but we would map beyond
end of ram if we are using 2048. In v2.6.31 (against which kernel this patch
made) there is the following check in dma_cache_maint():
|BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(start + size - 1));
Since the area starting at 0xc8000000 is no longer virt_addr_valid() we
BUG() during dma_map_single(). The BUG() statement was removed in v3.5-rc1 as
per 2dc6a016 ("ARM: dma-mapping: use asm-generic/dma-mapping-common.h").
This patch was tested on v2.6.31 and then forward-ported and compile
tested only against the net tree. I think it is still worth fixing
mainline even after the BUG() statement is gone.
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
It would be nice if someone could test this on current kernel.
Is this worth pushing stable?
Marek: Was there a special reason why the check was removed? Would it make
sense to bring it back say under CONFIG_DMA_DEBUG?
drivers/net/ethernet/freescale/fec_main.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 4cbebf3..29d8dc4 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -385,7 +385,7 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
* data.
*/
bdp->cbd_bufaddr = dma_map_single(&fep->pdev->dev, bufaddr,
- FEC_ENET_TX_FRSIZE, DMA_TO_DEVICE);
+ skb->len, DMA_TO_DEVICE);
if (dma_mapping_error(&fep->pdev->dev, bdp->cbd_bufaddr)) {
bdp->cbd_bufaddr = 0;
fep->tx_skbuff[index] = NULL;
@@ -779,11 +779,11 @@ fec_enet_tx(struct net_device *ndev)
else
index = bdp - fep->tx_bd_base;
- dma_unmap_single(&fep->pdev->dev, bdp->cbd_bufaddr,
- FEC_ENET_TX_FRSIZE, DMA_TO_DEVICE);
+ skb = fep->tx_skbuff[index];
+ dma_unmap_single(&fep->pdev->dev, bdp->cbd_bufaddr, skb->len,
+ DMA_TO_DEVICE);
bdp->cbd_bufaddr = 0;
- skb = fep->tx_skbuff[index];
/* Check for errors. */
if (status & (BD_ENET_TX_HB | BD_ENET_TX_LC |
--
1.8.4.4
next reply other threads:[~2013-11-27 12:44 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-27 12:44 Sebastian Andrzej Siewior [this message]
2013-11-27 13:08 ` [PATCH] net: fec_main: dma_map() only the length of the skb Fugang Duan
2013-11-27 13:38 ` Sebastian Andrzej Siewior
2013-11-28 1:18 ` Fugang Duan
2013-11-28 11:24 ` Sebastian Andrzej Siewior
2013-12-02 1:25 ` David Miller
2013-12-02 2:04 ` Fugang Duan
2013-12-02 2:14 ` Fugang Duan
2013-12-02 9:52 ` [PATCH v2] " Sebastian Andrzej Siewior
2013-12-02 9:58 ` Fugang Duan
2013-12-02 21:59 ` David Miller
2013-12-03 7:36 ` [PATCH] " Marek Szyprowski
2013-12-03 7:54 ` Sebastian Andrzej Siewior
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1385556253-4130-1-git-send-email-bigeasy@linutronix.de \
--to=bigeasy@linutronix.de \
--cc=B38611@freescale.com \
--cc=davem@davemloft.net \
--cc=fabio.estevam@freescale.com \
--cc=frank.li@freescale.net \
--cc=jim_baxter@mentor.com \
--cc=m.szyprowski@samsung.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).