From: "Pali Rohár" <pali.rohar@gmail.com>
To: Luciano Coelho <luca@coelho.fi>,
"John W. Linville" <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, freemangordon@abv.bg,
aaro.koskinen@iki.fi, pavel@ucw.cz, sre@ring0.de,
joni.lapilainen@gmail.com,
"Johannes Berg" <johannes@sipsolutions.net>,
"Felipe Contreras" <felipe.contreras@gmail.com>,
"David Gnedt" <david.gnedt@davizone.at>,
"Pali Rohár" <pali.rohar@gmail.com>
Subject: [PATCH v2 10/16] wl1251: enable tx path in monitor mode if necessary for packet injection
Date: Sun, 8 Dec 2013 10:25:08 +0100 [thread overview]
Message-ID: <1386494714-21070-11-git-send-email-pali.rohar@gmail.com> (raw)
In-Reply-To: <1386494714-21070-1-git-send-email-pali.rohar@gmail.com>
From: David Gnedt <david.gnedt@davizone.at>
If necessary enable the tx path in monitor mode for packet injection using
the JOIN command with BSS_TYPE_STA_BSS and zero BSSID.
Signed-off-by: David Gnedt <david.gnedt@davizone.at>
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
---
drivers/net/wireless/ti/wl1251/main.c | 5 +++++
drivers/net/wireless/ti/wl1251/tx.c | 25 +++++++++++++++++++++++++
drivers/net/wireless/ti/wl1251/wl1251.h | 1 +
3 files changed, 31 insertions(+)
diff --git a/drivers/net/wireless/ti/wl1251/main.c b/drivers/net/wireless/ti/wl1251/main.c
index b6f11b8..bb6e873 100644
--- a/drivers/net/wireless/ti/wl1251/main.c
+++ b/drivers/net/wireless/ti/wl1251/main.c
@@ -487,6 +487,7 @@ static void wl1251_op_stop(struct ieee80211_hw *hw)
wl->rssi_thold = 0;
wl->channel = WL1251_DEFAULT_CHANNEL;
wl->monitor_present = false;
+ wl->joined = false;
wl1251_debugfs_reset(wl);
@@ -546,6 +547,7 @@ static void wl1251_op_remove_interface(struct ieee80211_hw *hw,
mutex_lock(&wl->mutex);
wl1251_debug(DEBUG_MAC80211, "mac80211 remove interface");
wl->vif = NULL;
+ memset(wl->bssid, 0, ETH_ALEN);
mutex_unlock(&wl->mutex);
}
@@ -624,6 +626,7 @@ static int wl1251_op_config(struct ieee80211_hw *hw, u32 changed)
* at firmware level.
*/
if (wl->vif == NULL) {
+ wl->joined = false;
ret = wl1251_cmd_data_path_rx(wl, wl->channel, 1);
} else {
ret = wl1251_join(wl, wl->bss_type, wl->channel,
@@ -1612,7 +1615,9 @@ struct ieee80211_hw *wl1251_alloc_hw(void)
INIT_DELAYED_WORK(&wl->elp_work, wl1251_elp_work);
wl->channel = WL1251_DEFAULT_CHANNEL;
wl->monitor_present = false;
+ wl->joined = false;
wl->scanning = false;
+ wl->bss_type = MAX_BSS_TYPE;
wl->default_key = 0;
wl->listen_int = 1;
wl->rx_counter = 0;
diff --git a/drivers/net/wireless/ti/wl1251/tx.c b/drivers/net/wireless/ti/wl1251/tx.c
index 3cc82fd..216334d 100644
--- a/drivers/net/wireless/ti/wl1251/tx.c
+++ b/drivers/net/wireless/ti/wl1251/tx.c
@@ -28,6 +28,7 @@
#include "tx.h"
#include "ps.h"
#include "io.h"
+#include "event.h"
static bool wl1251_tx_double_buffer_busy(struct wl1251 *wl, u32 data_out_count)
{
@@ -277,6 +278,26 @@ static void wl1251_tx_trigger(struct wl1251 *wl)
TX_STATUS_DATA_OUT_COUNT_MASK;
}
+static void enable_tx_for_packet_injection(struct wl1251 *wl)
+{
+ int ret;
+
+ ret = wl1251_cmd_join(wl, BSS_TYPE_STA_BSS, wl->channel,
+ wl->beacon_int, wl->dtim_period);
+ if (ret < 0) {
+ wl1251_warning("join failed");
+ return;
+ }
+
+ ret = wl1251_event_wait(wl, JOIN_EVENT_COMPLETE_ID, 100);
+ if (ret < 0) {
+ wl1251_warning("join timeout");
+ return;
+ }
+
+ wl->joined = true;
+}
+
/* caller must hold wl->mutex */
static int wl1251_tx_frame(struct wl1251 *wl, struct sk_buff *skb)
{
@@ -298,6 +319,10 @@ static int wl1251_tx_frame(struct wl1251 *wl, struct sk_buff *skb)
}
}
+ /* Enable tx path in monitor mode for packet injection */
+ if ((wl->vif == NULL) && !wl->joined)
+ enable_tx_for_packet_injection(wl);
+
ret = wl1251_tx_path_status(wl);
if (ret < 0)
return ret;
diff --git a/drivers/net/wireless/ti/wl1251/wl1251.h b/drivers/net/wireless/ti/wl1251/wl1251.h
index 93c18d2..89f07f6 100644
--- a/drivers/net/wireless/ti/wl1251/wl1251.h
+++ b/drivers/net/wireless/ti/wl1251/wl1251.h
@@ -311,6 +311,7 @@ struct wl1251 {
u8 listen_int;
int channel;
bool monitor_present;
+ bool joined;
void *target_mem_map;
struct acx_data_path_params_resp *data_path;
--
1.7.9.5
next prev parent reply other threads:[~2013-12-08 9:25 UTC|newest]
Thread overview: 116+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-26 20:33 [PATCH 00/16] wl1251 patches from linux-n900 tree Pali Rohár
2013-10-26 20:34 ` [PATCH 01/16] mac80211: fix TX device statistics for monitor interfaces Pali Rohár
2013-10-28 5:53 ` Kalle Valo
[not found] ` <87iowiszyu.fsf-5ukZ45wKbUHoml4zekdYB16hYfS7NtTn@public.gmane.org>
2013-12-08 8:45 ` [PATCH] " Pali Rohár
[not found] ` <1386492357-20826-1-git-send-email-pali.rohar-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-12-16 12:38 ` Johannes Berg
2013-10-28 13:47 ` [PATCH 01/16] " Johannes Berg
2013-10-26 20:34 ` [PATCH 02/16] wl1251: fix scan behaviour while not associated Pali Rohár
2013-10-30 11:24 ` Pavel Machek
[not found] ` <1382819655-30430-1-git-send-email-pali.rohar-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-10-26 20:34 ` [PATCH 03/16] wl1251: add sysfs interface for bluetooth coexistence mode configuration Pali Rohár
2013-10-28 23:39 ` Ben Hutchings
2013-10-29 7:09 ` Luca Coelho
2013-10-29 13:35 ` Kalle Valo
[not found] ` <1383003587.3779.49.camel-/LGg1Z1CJKQ+9kgCwbf1HqK4ta4zdZpAajtMo4Cw6ucAvxtiuMwx3w@public.gmane.org>
2013-12-08 7:55 ` Pali Rohár
2013-12-08 16:36 ` Ben Hutchings
2013-10-26 20:34 ` [PATCH 07/16] wl1251: configure hardware en-/decryption for monitor mode Pali Rohár
2013-10-30 11:35 ` Pavel Machek
2013-10-26 20:34 ` [PATCH 13/16] wl1251: enforce changed hw encryption support on monitor state change Pali Rohár
2013-10-30 11:55 ` Pavel Machek
2013-11-08 14:20 ` [PATCH 00/16] wl1251 patches from linux-n900 tree Felipe Contreras
2013-11-25 19:54 ` Pali Rohár
2013-10-26 20:34 ` [PATCH 04/16] wl1251: retry power save entry Pali Rohár
2013-10-26 20:34 ` [PATCH 05/16] wl1251: implement hardware ARP filtering Pali Rohár
2013-10-30 11:28 ` Pavel Machek
2013-10-26 20:34 ` [PATCH 06/16] wl1251: split RX and TX data path initialisation Pali Rohár
2013-10-30 11:31 ` Pavel Machek
2013-10-26 20:34 ` [PATCH 08/16] wl1251: implement multicast address filtering Pali Rohár
2013-10-30 11:41 ` Pavel Machek
2013-10-26 20:34 ` [PATCH 09/16] wl1251: disable power saving in monitor mode Pali Rohár
2013-10-30 11:46 ` Pavel Machek
2013-10-26 20:34 ` [PATCH 10/16] wl1251: fix channel switching " Pali Rohár
2013-10-30 11:47 ` Pavel Machek
2013-10-26 20:34 ` [PATCH 11/16] wl1251: enable tx path in monitor mode if necessary for packet injection Pali Rohár
2013-10-30 11:51 ` Pavel Machek
2013-10-26 20:34 ` [PATCH 12/16] wl1251: disable retry and ACK policy for injected packets Pali Rohár
2013-10-30 11:52 ` Pavel Machek
2013-10-26 20:34 ` [PATCH 14/16] wl1251: add nvs file name to module firmware list Pali Rohár
2013-10-30 11:55 ` Pavel Machek
2013-10-26 20:34 ` [PATCH 15/16] wl1251: Add sysfs file tx_mgmt_frm_rate for setting rate Pali Rohár
2013-10-28 13:45 ` Johannes Berg
2013-10-26 20:34 ` [PATCH 16/16] wl1251: Add sysfs file address for setting permanent mac address Pali Rohár
2013-10-28 13:45 ` Johannes Berg
2013-10-28 13:49 ` Pali Rohár
2013-10-28 13:55 ` Johannes Berg
2013-10-28 14:00 ` Pali Rohár
2013-10-28 14:46 ` Dan Williams
2013-10-28 14:56 ` Johannes Berg
2013-10-28 15:04 ` Pali Rohár
2013-10-28 15:29 ` Dan Williams
2013-10-28 16:21 ` Pali Rohár
2013-10-28 15:33 ` Stephen Hemminger
2013-10-28 23:50 ` Ben Hutchings
2013-12-08 9:24 ` [PATCH v2 00/16] wl1251 patches from linux-n900 tree Pali Rohár
2013-12-08 9:24 ` [PATCH v2 01/16] wl1251: fix scan behaviour while not associated Pali Rohár
[not found] ` <1386494714-21070-2-git-send-email-pali.rohar-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-12-10 9:21 ` Pavel Machek
[not found] ` <20131210092114.GB22756-tWAi6jLit6GreWDznjuHag@public.gmane.org>
2013-12-10 15:41 ` Kalle Valo
2013-12-10 17:08 ` Pali Rohár
2013-12-11 20:44 ` Ben Hutchings
2013-12-31 9:44 ` Pali Rohár
2013-12-08 9:25 ` [PATCH v2 03/16] wl1251: retry power save entry Pali Rohár
2013-12-10 9:24 ` Pavel Machek
[not found] ` <1386494714-21070-1-git-send-email-pali.rohar-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-12-08 9:25 ` [PATCH v2 02/16] wl1251: add sysfs interface for bluetooth coexistence mode configuration Pali Rohár
[not found] ` <1386494714-21070-3-git-send-email-pali.rohar-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-12-10 15:46 ` Kalle Valo
2013-12-10 16:09 ` Pali Rohár
2013-12-08 9:25 ` [PATCH v2 04/16] wl1251: implement hardware ARP filtering Pali Rohár
2013-12-10 9:29 ` Pavel Machek
2013-12-10 9:59 ` Michal Kubecek
2013-12-08 9:25 ` [PATCH v2 05/16] wl1251: split RX and TX data path initialisation Pali Rohár
2013-12-10 9:31 ` Pavel Machek
2013-12-08 9:25 ` [PATCH v2 06/16] wl1251: configure hardware en-/decryption for monitor mode Pali Rohár
2013-12-10 9:35 ` Pavel Machek
2013-12-31 9:31 ` Pali Rohár
2013-12-08 9:25 ` [PATCH v2 16/16] wl1251: fix NULL pointer dereference Pali Rohár
2013-12-10 9:42 ` Pavel Machek
2013-12-08 9:25 ` [PATCH v2 07/16] wl1251: implement multicast address filtering Pali Rohár
2013-12-10 9:39 ` Pavel Machek
2013-12-08 9:25 ` [PATCH v2 08/16] wl1251: disable power saving in monitor mode Pali Rohár
[not found] ` <1386494714-21070-9-git-send-email-pali.rohar-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-12-10 9:41 ` Pavel Machek
2013-12-08 9:25 ` [PATCH v2 09/16] wl1251: fix channel switching " Pali Rohár
2013-12-10 9:43 ` Pavel Machek
2013-12-08 9:25 ` Pali Rohár [this message]
2013-12-10 9:44 ` [PATCH v2 10/16] wl1251: enable tx path in monitor mode if necessary for packet injection Pavel Machek
2013-12-08 9:25 ` [PATCH v2 11/16] wl1251: disable retry and ACK policy for injected packets Pali Rohár
2013-12-10 9:46 ` Pavel Machek
2013-12-08 9:25 ` [PATCH v2 12/16] wl1251: enforce changed hw encryption support on monitor state change Pali Rohár
2013-12-10 9:48 ` Pavel Machek
2013-12-08 9:25 ` [PATCH v2 13/16] wl1251: add nvs file name to module firmware list Pali Rohár
2013-12-10 9:49 ` Pavel Machek
2013-12-08 9:25 ` [PATCH v2 14/16] wl1251: Add sysfs file tx_mgmt_frm_rate for setting rate Pali Rohár
2013-12-09 16:50 ` Dan Williams
[not found] ` <1386494714-21070-15-git-send-email-pali.rohar-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-12-10 15:36 ` Kalle Valo
2013-12-08 9:25 ` [PATCH v2 15/16] wl1251: Add sysfs file address for setting permanent mac address Pali Rohár
2013-12-10 15:49 ` Kalle Valo
2013-12-10 16:10 ` Pali Rohár
2013-12-10 17:14 ` Pali Rohár
2013-12-10 17:49 ` Dan Williams
[not found] ` <1386697762.30202.6.camel-wKZy7rqYPVb5EHUCmHmTqw@public.gmane.org>
2013-12-10 17:52 ` Pali Rohár
2013-12-10 19:22 ` Dan Williams
2013-12-10 19:31 ` Pali Rohár
2013-12-11 21:26 ` Ben Hutchings
2013-12-11 21:17 ` Ben Hutchings
2013-12-11 21:28 ` Ben Hutchings
2013-12-11 21:35 ` Ivajlo Dimitrov
2013-12-11 22:15 ` Ben Hutchings
2013-12-11 22:36 ` Ivajlo Dimitrov
2013-12-12 12:45 ` Sergei Shtylyov
[not found] ` <1386800135.1516.296.camel-/LGg1Z1CJKQ+9kgCwbf1HqK4ta4zdZpAajtMo4Cw6ucAvxtiuMwx3w@public.gmane.org>
2013-12-11 22:53 ` Dan Williams
[not found] ` <1386802416.17188.69.camel-wKZy7rqYPVb5EHUCmHmTqw@public.gmane.org>
2013-12-12 19:55 ` Ben Hutchings
2013-12-12 20:24 ` Ivajlo Dimitrov
2013-12-12 10:56 ` Pavel Machek
2013-12-31 9:47 ` [PATCH v2 00/16] wl1251 patches from linux-n900 tree Pali Rohár
2014-01-06 20:00 ` John W. Linville
2014-01-06 20:26 ` Johannes Berg
2014-01-06 22:03 ` Pavel Machek
2014-01-07 12:15 ` Pavel Machek
2014-01-16 0:21 ` Pavel Machek
[not found] ` <20140116002121.GA3726-tWAi6jLit6GreWDznjuHag@public.gmane.org>
2014-01-16 20:29 ` John W. Linville
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1386494714-21070-11-git-send-email-pali.rohar@gmail.com \
--to=pali.rohar@gmail.com \
--cc=aaro.koskinen@iki.fi \
--cc=david.gnedt@davizone.at \
--cc=felipe.contreras@gmail.com \
--cc=freemangordon@abv.bg \
--cc=johannes@sipsolutions.net \
--cc=joni.lapilainen@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=luca@coelho.fi \
--cc=netdev@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=sre@ring0.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).