From: Vince Bridgers <vbridgers2013@gmail.com>
To: netdev@vger.kernel.org
Cc: peppe.cavallaro@st.com, rayagond@vayavyalabs.com,
Vince Bridgers <vbridgers2013@gmail.com>
Subject: [PATCH net] Fix incorrect spinlock release in stmmac_ptp.c and incorrect PTP capabilities detection in PTP initialization.
Date: Fri, 20 Dec 2013 11:19:34 -0600 [thread overview]
Message-ID: <1387559974-31872-1-git-send-email-vbridgers2013@gmail.com> (raw)
In-Reply-To: <vbridgers2013@gmail.com>
This patch corrects a problem in stmmac_ptp.c, functions
stmmac_adjust_time and stmmac_adjust_freq where the incorrect spinlocks
were released. This patch also addresses a problem in stmmac_main,
function stmmac_init_ptp where the capability detection for
advanced timestamping was masked by message masking.
This patch was touch tested using linuxptp, and runs without the previously
observed instabilities. More extensive testing is ongoing.
Vince
Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 20 +++++++++-----------
drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c | 4 ++--
2 files changed, 11 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 8a7a23a..797b56a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -622,17 +622,15 @@ static int stmmac_init_ptp(struct stmmac_priv *priv)
if (!(priv->dma_cap.time_stamp || priv->dma_cap.atime_stamp))
return -EOPNOTSUPP;
- if (netif_msg_hw(priv)) {
- if (priv->dma_cap.time_stamp) {
- pr_debug("IEEE 1588-2002 Time Stamp supported\n");
- priv->adv_ts = 0;
- }
- if (priv->dma_cap.atime_stamp && priv->extend_desc) {
- pr_debug
- ("IEEE 1588-2008 Advanced Time Stamp supported\n");
- priv->adv_ts = 1;
- }
- }
+ priv->adv_ts = 0;
+ if (priv->dma_cap.atime_stamp && priv->extend_desc)
+ priv->adv_ts = 1;
+
+ if (netif_msg_hw(priv) && priv->dma_cap.time_stamp)
+ pr_debug("IEEE 1588-2002 Time Stamp supported\n");
+
+ if (netif_msg_hw(priv) && priv->adv_ts)
+ pr_debug("IEEE 1588-2008 Advanced Time Stamp supported\n");
priv->hw->ptp = &stmmac_ptp;
priv->hwts_tx_en = 0;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
index b8b0eee..7680581 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
@@ -56,7 +56,7 @@ static int stmmac_adjust_freq(struct ptp_clock_info *ptp, s32 ppb)
priv->hw->ptp->config_addend(priv->ioaddr, addend);
- spin_unlock_irqrestore(&priv->lock, flags);
+ spin_unlock_irqrestore(&priv->ptp_lock, flags);
return 0;
}
@@ -91,7 +91,7 @@ static int stmmac_adjust_time(struct ptp_clock_info *ptp, s64 delta)
priv->hw->ptp->adjust_systime(priv->ioaddr, sec, nsec, neg_adj);
- spin_unlock_irqrestore(&priv->lock, flags);
+ spin_unlock_irqrestore(&priv->ptp_lock, flags);
return 0;
}
--
1.7.9.5
next reply other threads:[~2013-12-20 17:19 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-20 17:19 Vince Bridgers [this message]
2013-12-30 3:38 ` [PATCH net] Fix incorrect spinlock release in stmmac_ptp.c and incorrect PTP capabilities detection in PTP initialization David Miller
-- strict thread matches above, loose matches on Subject: below --
2013-12-20 14:49 Vince Bridgers
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1387559974-31872-1-git-send-email-vbridgers2013@gmail.com \
--to=vbridgers2013@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
--cc=rayagond@vayavyalabs.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).