Netdev List
 help / color / mirror / Atom feed
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Mark Rustad <mark.d.rustad@intel.com>,
	netdev@vger.kernel.org, gospo@redhat.com, sassmann@redhat.com,
	Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next v2 03/11] ixgbe: Use static inlines instead of macros
Date: Thu,  2 Jan 2014 21:18:22 -0800	[thread overview]
Message-ID: <1388726310-2996-4-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <1388726310-2996-1-git-send-email-jeffrey.t.kirsher@intel.com>

From: Mark Rustad <mark.d.rustad@intel.com>

Kernel coding standard prefers static inline functions instead
of macros, so use them for register accessors. This is to prepare
for adding LER, Live Error Recovery, checks to those accessors.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe.h        |  5 +++++
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.h | 23 ++++++++++++++++-------
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c   |  4 ++--
 3 files changed, 23 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
index 8da263a..199cf74 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
@@ -585,6 +585,11 @@ static inline u16 ixgbe_desc_unused(struct ixgbe_ring *ring)
 	return ((ntc > ntu) ? 0 : ring->count) + ntc - ntu - 1;
 }
 
+static inline void ixgbe_write_tail(struct ixgbe_ring *ring, u32 value)
+{
+	writel(value, ring->tail);
+}
+
 #define IXGBE_RX_DESC(R, i)	    \
 	(&(((union ixgbe_adv_rx_desc *)((R)->desc))[i]))
 #define IXGBE_TX_DESC(R, i)	    \
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
index d259dc7..503790a 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
@@ -124,22 +124,31 @@ s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw);
 s32 ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw *hw);
 s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw);
 
-#define IXGBE_WRITE_REG(a, reg, value) writel((value), ((a)->hw_addr + (reg)))
+static inline void IXGBE_WRITE_REG(struct ixgbe_hw *hw, u32 reg, u32 value)
+{
+	writel(value, hw->hw_addr + reg);
+}
 
 #ifndef writeq
 #define writeq(val, addr) writel((u32) (val), addr); \
     writel((u32) (val >> 32), (addr + 4));
 #endif
 
-#define IXGBE_WRITE_REG64(a, reg, value) writeq((value), ((a)->hw_addr + (reg)))
+static inline void IXGBE_WRITE_REG64(struct ixgbe_hw *hw, u32 reg, u64 value)
+{
+	writeq(value, hw->hw_addr + reg);
+}
 
-#define IXGBE_READ_REG(a, reg) readl((a)->hw_addr + (reg))
+static inline u32 IXGBE_READ_REG(struct ixgbe_hw *hw, u32 reg)
+{
+	return readl(hw->hw_addr + reg);
+}
 
-#define IXGBE_WRITE_REG_ARRAY(a, reg, offset, value) (\
-    writel((value), ((a)->hw_addr + (reg) + ((offset) << 2))))
+#define IXGBE_WRITE_REG_ARRAY(a, reg, offset, value) \
+		IXGBE_WRITE_REG((a), (reg) + ((offset) << 2), (value))
 
-#define IXGBE_READ_REG_ARRAY(a, reg, offset) (\
-    readl((a)->hw_addr + (reg) + ((offset) << 2)))
+#define IXGBE_READ_REG_ARRAY(a, reg, offset) \
+		IXGBE_READ_REG((a), (reg) + ((offset) << 2))
 
 #define IXGBE_WRITE_FLUSH(a) IXGBE_READ_REG(a, IXGBE_STATUS)
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 923b0fa..4d71277 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -1315,7 +1315,7 @@ static inline void ixgbe_release_rx_desc(struct ixgbe_ring *rx_ring, u32 val)
 	 * such as IA-64).
 	 */
 	wmb();
-	writel(val, rx_ring->tail);
+	ixgbe_write_tail(rx_ring, val);
 }
 
 static bool ixgbe_alloc_mapped_page(struct ixgbe_ring *rx_ring,
@@ -6699,7 +6699,7 @@ static void ixgbe_tx_map(struct ixgbe_ring *tx_ring,
 	tx_ring->next_to_use = i;
 
 	/* notify HW of packet */
-	writel(i, tx_ring->tail);
+	ixgbe_write_tail(tx_ring, i);
 
 	return;
 dma_error:
-- 
1.8.3.1

  parent reply	other threads:[~2014-01-03  5:18 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-03  5:18 [net-next v2 00/11][pull request] Intel Wired LAN Driver Updates Jeff Kirsher
2014-01-03  5:18 ` [net-next v2 01/11] ixbge: Protect ixgbe_down with __IXGBE_DOWN bit Jeff Kirsher
2014-01-03  5:18 ` [net-next v2 02/11] ixgbe: Indicate removal state explicitly Jeff Kirsher
2014-01-03  5:18 ` Jeff Kirsher [this message]
2014-01-03  5:28   ` [net-next v2 03/11] ixgbe: Use static inlines instead of macros Joe Perches
2014-01-03 18:31     ` Rustad, Mark D
2014-01-03  5:18 ` [net-next v2 04/11] ixgbe: Make ethtool register test use accessors Jeff Kirsher
2014-01-03  5:18 ` [net-next v2 05/11] ixgbe: Check register reads for adapter removal Jeff Kirsher
2014-01-03  5:18 ` [net-next v2 06/11] ixgbe: Check for adapter removal on register writes Jeff Kirsher
2014-01-03  5:18 ` [net-next v2 07/11] ixgbe: Additional adapter removal checks Jeff Kirsher
2014-01-03  5:18 ` [net-next v2 08/11] ixgbe: Add Live Error Recovery configuration option Jeff Kirsher
2014-01-04  1:43   ` David Miller
2014-01-03  5:18 ` [net-next v2 09/11] net: e1000e calls skb_set_hash Jeff Kirsher
2014-01-03  5:18 ` [net-next v2 10/11] net: igb " Jeff Kirsher
2014-01-03  5:18 ` [net-next v2 11/11] igb: make local functions static and remove dead code Jeff Kirsher

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1388726310-2996-4-git-send-email-jeffrey.t.kirsher@intel.com \
    --to=jeffrey.t.kirsher@intel.com \
    --cc=davem@davemloft.net \
    --cc=gospo@redhat.com \
    --cc=mark.d.rustad@intel.com \
    --cc=netdev@vger.kernel.org \
    --cc=sassmann@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox