[net-next 00/15][pull request] Intel Wired LAN Driver updates

[net-next 00/15][pull request] Intel Wired LAN Driver updates

[Jeff Kirsher]

The following series contains updates to e1000e only.  All of the
patches are cleanup of the e1000e driver.

The following are changes since commit fafdbf84d7eb2cd7aee435cc381a0796e1a5ccb0:
  trivial: typo hnalder -> handler
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Bruce Allan (15):
  e1000e: cleanup: use goto for common work needed by multiple exit
    points
  e1000e: cleanup: rename goto labels to be more meaningful
  e1000e: potentially incorrect return for
    e1000_cfg_kmrn_10_100_80003es2lan
  e1000e: potential incorrect return for
    e1000_setup_copper_link_80003es2lan
  e1000e: cleanup: remove unnecessary assignments just before returning
  e1000e: cleanup: always return 0
  e1000e: potentially incorrect return for
    e1000_set_d3_lplu_state_ich8lan
  e1000e: cleanup: remove unreachable statement
  e1000e: cleanup: remove unnecessary variable ret_val
  e1000e: cleanup: remove unnecessary test and return
  e1000e: cleanup: remove unnecessary variable initializations
  e1000e: cleanup: minor whitespace addition (insert blank line
    separator)
  e1000e: potentially incorrect return for e1000_init_hw_ich8lan
  e1000e: potentially incorrect return for
    e1000e_setup_fiber_serdes_link
  e1000e: cleanup goto statements to exit points without common work

 drivers/net/ethernet/intel/e1000e/80003es2lan.c |   36 +---
 drivers/net/ethernet/intel/e1000e/82571.c       |   36 ++---
 drivers/net/ethernet/intel/e1000e/ich8lan.c     |  220 +++++++++------------
 drivers/net/ethernet/intel/e1000e/mac.c         |   25 +--
 drivers/net/ethernet/intel/e1000e/manage.c      |   32 +--
 drivers/net/ethernet/intel/e1000e/netdev.c      |   16 +-
 drivers/net/ethernet/intel/e1000e/nvm.c         |   32 ++--
 drivers/net/ethernet/intel/e1000e/phy.c         |  241 ++++++++++-------------
 8 files changed, 265 insertions(+), 373 deletions(-)

-- 
1.7.7.6

Re: [net-next 00/15][pull request] Intel Wired LAN Driver updates

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Mon, 13 Feb 2012 13:47:35 -0800

> The following series contains updates to e1000e only.  All of the
> patches are cleanup of the e1000e driver.
> 
> The following are changes since commit fafdbf84d7eb2cd7aee435cc381a0796e1a5ccb0:
>   trivial: typo hnalder -> handler
> and are available in the git repository at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Pulled, thanks.

[net-next 00/15][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series contains updates to e1000e only.

The following are changes since commit 1def9238d4aa2146924994aa4b7dc861f03b9362:
  net_sched: more precise pkt_len computation
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Bruce Allan (15):
  e1000e: SerDes autoneg flow control
  e1000e: Acquire/release semaphore when writing each EEPROM page
  e1000e: Invalid Image CSUM bit changed for I217
  e1000e: helper functions for accessing EMI registers
  e1000e: 82577: workaround for link drop issue
  e1000e: fix enabling of EEE on 82579 and I217
  e1000e: unexpected "Reset adapter" message when cable pulled
  e1000e: add missing bailout on error
  e1000e: resolve checkpatch PREFER_PR_LEVEL warning
  e1000e: cleanup redundant statistics counter
  e1000e: cleanup unusual comment placement
  e1000e: cleanup unnecessary line wrap
  e1000e: cleanup magic number
  e1000e: cleanup code duplication
  e1000e: merge multiple conditional statements into one

 drivers/net/ethernet/intel/e1000e/defines.h |  10 +-
 drivers/net/ethernet/intel/e1000e/e1000.h   |   2 +-
 drivers/net/ethernet/intel/e1000e/ethtool.c |   1 -
 drivers/net/ethernet/intel/e1000e/hw.h      |   4 +
 drivers/net/ethernet/intel/e1000e/ich8lan.c | 213 +++++++++++++++++++++-------
 drivers/net/ethernet/intel/e1000e/mac.c     | 125 ++++++++++++++++
 drivers/net/ethernet/intel/e1000e/netdev.c  |  67 ++++-----
 drivers/net/ethernet/intel/e1000e/nvm.c     |  26 ++--
 drivers/net/ethernet/intel/e1000e/param.c   |   3 +-
 9 files changed, 340 insertions(+), 111 deletions(-)

-- 
1.7.11.7

[net-next 00/15][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series contains updates to ixgbevf and e1000e.

Alex's ixgbevf patch is meant to address several race issues that become
possible because next_to_watch could possibly be set to a value that shows
that the descriptor is done when it is not.  In order to correct that we
instead make next_to_watch a pointer that is set to NULL during cleanup,
and set to the eop_desc after the descriptor rings have been written.

Stephen's ixgbevf patch makes the PCI id table a const and reformats the
table to match what the ixgbe driver does.

The remaining 13 patches from Bruce are cleanup patches for e1000e to
resolve checkpatch.pl warnings/errors, removing blank lines where
necessary and fix code formatting.

The following are changes since commit 7f0e44ac9f7f12a2519bfed9ea4df3c1471bd8bb:
  ipv6 flowlabel: add __rcu annotations
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Alexander Duyck (1):
  ixgbevf: Make next_to_watch a pointer and adjust memory barriers to
    avoid races

Bruce Allan (13):
  e1000e: cleanup CODE_INDENT checkpatch errors
  e1000e: cleanup SPACING checkpatch errors and warnings
  e1000e: cleanup LONG_LINE checkpatch warnings
  e1000e: cleanup LEADING_SPACE checkpatch warnings
  e1000e: cleanup PARENTHESIS_ALIGNMENT checkpatch checks
  e1000e: cleanup SPACING checkpatch checks
  e1000e: cleanup (add/remove) blank lines where appropriate
  e1000e: cleanup unusually placed comments
  e1000e: cleanup formatting of static structs
  e1000e: cleanup unnecessary line breaks
  e1000e: cleanup USLEEP_RANGE checkpatch checks
  e1000e: cleanup format of struct e1000_opt_list struct
  e1000e: cleanup - move defines to appropriate header file

Stephen Hemminger (1):
  ixgbevf: use PCI_DEVICE_TABLE macro

 drivers/net/ethernet/intel/e1000e/80003es2lan.c   | 131 ++++++-----
 drivers/net/ethernet/intel/e1000e/82571.c         |  38 ++-
 drivers/net/ethernet/intel/e1000e/82571.h         |   2 +
 drivers/net/ethernet/intel/e1000e/defines.h       |  25 +-
 drivers/net/ethernet/intel/e1000e/e1000.h         |  18 +-
 drivers/net/ethernet/intel/e1000e/ethtool.c       | 177 +++++++-------
 drivers/net/ethernet/intel/e1000e/hw.h            |   4 +-
 drivers/net/ethernet/intel/e1000e/ich8lan.c       | 195 ++++++++--------
 drivers/net/ethernet/intel/e1000e/mac.c           |  10 +-
 drivers/net/ethernet/intel/e1000e/netdev.c        | 269 ++++++++++------------
 drivers/net/ethernet/intel/e1000e/nvm.c           |   2 +-
 drivers/net/ethernet/intel/e1000e/param.c         |  62 +++--
 drivers/net/ethernet/intel/e1000e/phy.c           | 130 +++++------
 drivers/net/ethernet/intel/ixgbevf/ixgbevf.h      |   2 +-
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c |  80 ++++---
 15 files changed, 574 insertions(+), 571 deletions(-)

-- 
1.7.11.7

Re: [net-next 00/15][pull request] Intel Wired LAN Driver Updates

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Fri,  8 Mar 2013 02:07:02 -0800

> This series contains updates to ixgbevf and e1000e.
> 
> Alex's ixgbevf patch is meant to address several race issues that become
> possible because next_to_watch could possibly be set to a value that shows
> that the descriptor is done when it is not.  In order to correct that we
> instead make next_to_watch a pointer that is set to NULL during cleanup,
> and set to the eop_desc after the descriptor rings have been written.
> 
> Stephen's ixgbevf patch makes the PCI id table a const and reformats the
> table to match what the ixgbe driver does.
> 
> The remaining 13 patches from Bruce are cleanup patches for e1000e to
> resolve checkpatch.pl warnings/errors, removing blank lines where
> necessary and fix code formatting.
> 
> The following are changes since commit 7f0e44ac9f7f12a2519bfed9ea4df3c1471bd8bb:
>   ipv6 flowlabel: add __rcu annotations
> and are available in the git repository at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Pulled, thanks Jeff.

[net-next 00/15][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series contains updates to ixgbe and igb.

The ixgbe changes contains 2 patches from the community, one which is a
fix from akepner to fix a issue where netif_running() in shutdown was
not done under rtnl_lock.  The other community fix from Joe Perches
cleans up #ifdef CONFIG_DEBUG_FS which is no longer necessary.  The
last ixgbe patch, from Jacob Keller, adds support for WoL on 82559
SFP+ LOM.

The remaining patches are against igb, 10 of which were previously
submitted in a pull request where changes were requested.

The following igb patches:
 igb: Support for 100base-fx SFP
 igb: Support to read and export SFF-8472/8079 data
are v2 based on feedback from Dan Carpenter and Ben Hutchings in
the previous pull request.

The largest set of changes are in my patch to cleanup code comments
and whitespace to align the igb driver with the networking style of
code comments.  While cleaning up the code comments, fixed several
other whitespace/checkpatch.pl code formatting issues.

Other notable igb patches are EEE capable devices query the PHY to
determine what the link partner is advertising, added support for
i354 devices and added support for spoofchk config.

The following are changes since commit c1cb0d3b569b1d21ada8666efb42dfd437617a09:
  Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Akeem G. Abodunrin (5):
  igb: Support for 100base-fx SFP
  igb: Support to read and export SFF-8472/8079 data
  igb: Implement support to power sfp cage and turn on I2C
  igb: random code and comments fix
  igb: Fix sparse warnings on function pointers

Alexander Duyck (3):
  igb: Mask off check of frag_off as we only want fragment offset
  igb: Pull adapter out of main path in igb_xmit_frame_ring
  igb: Use rx/tx_itr_setting when setting up initial value of itr

Carolyn Wyborny (1):
  igb: Add support for i354 devices

Jacob Keller (1):
  ixgbe: Add support for WoL on 82599 SFP+ LOM

Jeff Kirsher (1):
  igb: Fix code comments and whitespace

Joe Perches (1):
  ixgbe: Remove unnecessary #ifdef CONFIG_DEBUG_FS tests

Lior Levy (1):
  igb: add support for spoofchk config

Matthew Vick (1):
  igb: Enable EEE LP advertisement

akepner (1):
  ixgbe: in shutdown, do netif_running() under rtnl_lock

 drivers/net/ethernet/intel/igb/e1000_82575.c   |  252 +++--
 drivers/net/ethernet/intel/igb/e1000_82575.h   |    2 +
 drivers/net/ethernet/intel/igb/e1000_defines.h |   50 +-
 drivers/net/ethernet/intel/igb/e1000_hw.h      |   57 +-
 drivers/net/ethernet/intel/igb/e1000_i210.c    |   93 +-
 drivers/net/ethernet/intel/igb/e1000_i210.h    |    4 +
 drivers/net/ethernet/intel/igb/e1000_mac.c     |  124 +--
 drivers/net/ethernet/intel/igb/e1000_mac.h     |   17 +-
 drivers/net/ethernet/intel/igb/e1000_mbx.c     |   11 +-
 drivers/net/ethernet/intel/igb/e1000_mbx.h     |   52 +-
 drivers/net/ethernet/intel/igb/e1000_nvm.c     |   27 +-
 drivers/net/ethernet/intel/igb/e1000_phy.c     |  259 ++---
 drivers/net/ethernet/intel/igb/e1000_regs.h    |   53 +-
 drivers/net/ethernet/intel/igb/igb.h           |  133 +--
 drivers/net/ethernet/intel/igb/igb_ethtool.c   |  345 +++++--
 drivers/net/ethernet/intel/igb/igb_hwmon.c     |   29 +-
 drivers/net/ethernet/intel/igb/igb_main.c      | 1270 +++++++++++++-----------
 drivers/net/ethernet/intel/igb/igb_ptp.c       |   61 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe.h       |    5 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c  |   15 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe_type.h  |    1 +
 21 files changed, 1604 insertions(+), 1256 deletions(-)

-- 
1.7.11.7

Re: [net-next 00/15][pull request] Intel Wired LAN Driver Updates

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Thu, 18 Apr 2013 16:30:07 -0700

> This series contains updates to ixgbe and igb.
> 
> The ixgbe changes contains 2 patches from the community, one which is a
> fix from akepner to fix a issue where netif_running() in shutdown was
> not done under rtnl_lock.  The other community fix from Joe Perches
> cleans up #ifdef CONFIG_DEBUG_FS which is no longer necessary.  The
> last ixgbe patch, from Jacob Keller, adds support for WoL on 82559
> SFP+ LOM.
> 
> The remaining patches are against igb, 10 of which were previously
> submitted in a pull request where changes were requested.
> 
> The following igb patches:
>  igb: Support for 100base-fx SFP
>  igb: Support to read and export SFF-8472/8079 data
> are v2 based on feedback from Dan Carpenter and Ben Hutchings in
> the previous pull request.
> 
> The largest set of changes are in my patch to cleanup code comments
> and whitespace to align the igb driver with the networking style of
> code comments.  While cleaning up the code comments, fixed several
> other whitespace/checkpatch.pl code formatting issues.
> 
> Other notable igb patches are EEE capable devices query the PHY to
> determine what the link partner is advertising, added support for
> i354 devices and added support for spoofchk config.
> 
> The following are changes since commit c1cb0d3b569b1d21ada8666efb42dfd437617a09:
>   Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next
> and are available in the git repository at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Pulled, thanks a lot Jeff.

[net-next 00/15][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series contains updates to ixgbe and pci.

The first patch for ixgbe from Greg Rose is the second submission.  The
first submission of "ixgbe: Retain VLAN filtering in promiscuous + VT
mode" had a typo, which Joe Perches pointed out and is fixed in this
submission.

Alex updates the ixgbe driver to use the generic helper pci_vfs_assigned
instead of the driver specific function ixgbe_vfs_are_assigned.

Don Skidmore provides 4 patches for ixgbe, the first being a fix for
flow control ethtool reporting.  Originally ixgbe_device_supports_autoneg_fc()
was expected to be called by only copper devices, which lead to false
information being displayed via ethtool.  Two other patches add support
for fixed fiber for SFP+ devices and the addition of a quad-port x520
adapter.  The last patch simply bumps the driver version.

Emil Tantilov provides 3 fixes for ixgbe, two of which resolve
semaphore lock issues.  The third fix resolves several issues in the
previous implementation of the SFF data dumps of SFP+ modules.

The remaining ixgbe and pci patches are from Jacob Keller.  The pci
patches exposes bus speed, link speed and bus width so that drivers
can take advantage of this information.  In addition, adds a pci function
which obtains minimum link width and speed.  Jacob also provides the
ixgbe patch to incorporate the pci function. He provides a patch that
fixes a lockdep issue created due to ixgbe_ptp_stop always running
cancel_work_sync even if the work item had not been created properly with
INIT_WORK. This issue was found and reported by Stephen Hemminger.

The following are changes since commit fe6f700d6cbb7e8a61711e325f53d9c9e0a42a4c:
  net/mlx4_core: Respond to operation request by firmware
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Alexander Duyck (1):
  ixgbe: Use pci_vfs_assigned instead of ixgbe_vfs_are_assigned

Don Skidmore (4):
  ixgbe: fix fc autoneg ethtool reporting.
  ixgbe: add new media type
  ixgbe: bump version number
  ixgbe: add support for quad-port x520 adapter

Emil Tantilov (3):
  ixgbe: fix semaphore lock for I2C read/writes on 82598
  ixgbe: fix SFF data dumps of SFP+ modules
  ixgbe: clear semaphore bits on timeouts

Greg Rose (1):
  ixgbe: Retain VLAN filtering in promiscuous + VT mode

Jacob Keller (6):
  pci: expose pcie_link_speed and pcix_bus_speed arrays
  pci: move enum pcie_link_width into pci.h
  pci: Add function to obtain minimum link width and speed
  ixgbe: call pcie_get_mimimum_link to check if device has enough
    bandwidth
  ixgbe: fix lockdep annotation issue for ptp's work item
  ixgbe: rename LL_EXTENDED_STATS to use queue instead of q

 drivers/net/ethernet/intel/ixgbe/ixgbe.h         |   7 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c   |  34 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c   | 231 ++++++++++-
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.c  |  88 +++--
 drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c |  94 ++---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c    | 158 +++++++-
 drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c     | 470 ++++++++++++++++-------
 drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h     |  41 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c     |  12 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c   | 101 +++--
 drivers/net/ethernet/intel/ixgbe/ixgbe_type.h    |  12 +
 drivers/pci/pci.c                                |  43 +++
 drivers/pci/probe.c                              |   4 +-
 include/linux/pci.h                              |  18 +
 include/linux/pci_hotplug.h                      |  13 -
 15 files changed, 983 insertions(+), 343 deletions(-)

-- 
1.7.11.7

[net-next 00/15][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series contains updates to igb and e1000e.

Akeem provides 3 igb patches, the first resets the link when EEE is enabled
or disabled if the link is up.  His second patch changes a register read
which normally stores of the read value to "just-read" so that hardware
can accurately latch the register read.  Lastly, he adds rcu_lock to avoid
a possible race condition with igb_update_stats function.

Mitch provides a fix for SR-IOV, where MSI-X interrupts are required, so
make sure that MSI-X is enabled before allowing the user to turn on SR-IOV.

Alex's igb patch make it so that we limit the lower bound for max_frame_size
to the size of a standard Ethernet frame.  This allows for feature parity
with other Intel based drivers such as ixgbe.

Carolyn adds a SKU for a flashless i210 device and a fix for get_fw_version()
so that it works for all parts for igb.  In addition, she has 2 igb patches
to refactor NVM code to accommodate devices with no flash.  Lastly, she
adds code to check for the failure of pci_disable_link_state() to attempt
to work around a problem found with some systems.

Laura provides the remaining 2 igb patches.  One removing the hard-coded
value for the size of the RETA indirection table, and creates a macro instead
for the RETA indirection table.  The second adds the ethtool callbacks
necessary to change the RETA indirection table from userspace.

Bruce fixes a whitespace issue in a recent commit and resolves a jiffies
comparison warning by using time_after().

Li provides a fix for e1000e to avoid a kernel crash on shutdown by adding
one more check in e1000e_shutdown().  This is due to e1000e_shutdown()
trying to clear correctable errors on the upstream P2P bridge, when under
some cases we do not have the upstream P2P bridge.

The following are changes since commit 84ce22df92f5cf9ecb76d53f4bf5f6d504684540:
  net: davinci_mdio: use platform_{get,set}_drvdata()
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Akeem G Abodunrin (3):
  igb: Reset the link when EEE setting changed
  igb: Read register for latch_on without return value
  igb: Added rcu_lock to avoid race

Alexander Duyck (1):
  igb: Update MTU so that it is always at least a standard frame size

Bruce Allan (2):
  e1000e: cleanup whitespace in recent commit
  e1000e: resolve checkpatch JIFFIES_COMPARISON warning

Carolyn Wyborny (5):
  igb: Refactor of init_nvm_params
  igb: Refactor NVM read functions to accommodate devices with no flash
  igb: Add device support for flashless SKU of i210 device
  igb: Fix get_fw_version function for all parts
  e1000e: Add code to check for failure of pci_disable_link_state call

Laura Mihaela Vasilescu (2):
  igb: Add macro for size of RETA indirection table
  igb: Expose RSS indirection table for ethtool

Li Zhang (1):
  e1000e: Avoid kernel crash during shutdown

Mitch A Williams (1):
  igb: don't allow SR-IOV without MSI-X

 drivers/net/ethernet/intel/e1000e/ethtool.c    |   2 +-
 drivers/net/ethernet/intel/e1000e/hw.h         |   3 +-
 drivers/net/ethernet/intel/e1000e/netdev.c     |  92 ++++++++++-----
 drivers/net/ethernet/intel/igb/e1000_82575.c   | 117 ++++++++-----------
 drivers/net/ethernet/intel/igb/e1000_defines.h |  34 ++++--
 drivers/net/ethernet/intel/igb/e1000_hw.h      |   3 +
 drivers/net/ethernet/intel/igb/e1000_i210.c    | 155 ++++++++++++++++---------
 drivers/net/ethernet/intel/igb/e1000_i210.h    |   5 +-
 drivers/net/ethernet/intel/igb/e1000_nvm.c     |  80 +++++++++----
 drivers/net/ethernet/intel/igb/e1000_nvm.h     |   1 +
 drivers/net/ethernet/intel/igb/igb.h           |   5 +
 drivers/net/ethernet/intel/igb/igb_ethtool.c   | 106 ++++++++++++++++-
 drivers/net/ethernet/intel/igb/igb_main.c      | 105 ++++++++++-------
 drivers/net/ethernet/intel/igb/igb_ptp.c       |   8 +-
 14 files changed, 476 insertions(+), 240 deletions(-)

-- 
1.8.3.1

[net-next 00/15][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series contains updates to i40e only.

Christopher Pau provides a patch to set pf_id based on device and
function numbers since NICs with ARI enabled can have function
numbers larger than 8.

Anjali provides 3 i40e patches to update hardware defines to keep
in sync with hardware updates.

Shannon provides the majority of i40e patches, with 7.  First patch
clears the admin queue head and tail registers during admin queue
shutdown. Then simplifies the admin queue head-tail-len setups to
use more virtual registers.  Provides several patches to cleanup
and fix driver load and reset procedures to make more robust.  Lastly,
provides an ethtool test for interrupts using the software interrupt.

Mitch provides some i40e patches which fixes up VF code in the PF
driver, specifically the number of vectors per VF are reported by the
hardware does not include vector 0, so we need to account for this
when checking.  In addition, cleans up debugging messages.

Kamil provides an i40e patch to fix the diagnostics test by restricting
the diagnostic test length.

The following are changes since commit d70f2cf520cf8c86c6b467fc5dcea524ec51dc2f:
  macvlan: Support creating macvtaps from macvlans
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Anjali Singhai Jain (3):
  i40e: sync header files with hardware
  i40e: register file updates
  i40e: firmware version fields offsets update

Christopher Pau (1):
  i40e: set pf_id based on device and function numbers

Kamil Krawczyk (1):
  i40e: restrict diag test length

Mitch Williams (3):
  i40e: allow one more vector for VFs
  i40e: properly add VF MAC addresses
  i40e: fix debugging messages

Shannon Nelson (7):
  i40e: clear AQ head and tail registers
  i40e: simplify aq head-tail-len setups
  i40e: select reset counters correctly
  i40e: retry call on timeout
  i40e: default debug mask setting
  i40e: add interrupt test
  i40e: add support for triggering EMPR

 drivers/net/ethernet/intel/i40e/i40e.h             |  19 +--
 drivers/net/ethernet/intel/i40e/i40e_adminq.c      |  66 +++++-----
 drivers/net/ethernet/intel/i40e/i40e_adminq.h      |   1 +
 drivers/net/ethernet/intel/i40e/i40e_common.c      |   6 +-
 drivers/net/ethernet/intel/i40e/i40e_debugfs.c     |   4 +
 drivers/net/ethernet/intel/i40e/i40e_diag.c        |   8 +-
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c     |  10 +-
 drivers/net/ethernet/intel/i40e/i40e_lan_hmc.h     |   4 +-
 drivers/net/ethernet/intel/i40e/i40e_main.c        |  37 +++++-
 drivers/net/ethernet/intel/i40e/i40e_register.h    | 134 +++++++--------------
 drivers/net/ethernet/intel/i40e/i40e_type.h        |  11 +-
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c |   8 +-
 12 files changed, 155 insertions(+), 153 deletions(-)

-- 
1.8.3.1

Re: [net-next 00/15][pull request] Intel Wired LAN Driver Updates

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Fri,  6 Dec 2013 00:06:13 -0800

> This series contains updates to i40e only.
> 
> Christopher Pau provides a patch to set pf_id based on device and
> function numbers since NICs with ARI enabled can have function
> numbers larger than 8.
> 
> Anjali provides 3 i40e patches to update hardware defines to keep
> in sync with hardware updates.
> 
> Shannon provides the majority of i40e patches, with 7.  First patch
> clears the admin queue head and tail registers during admin queue
> shutdown. Then simplifies the admin queue head-tail-len setups to
> use more virtual registers.  Provides several patches to cleanup
> and fix driver load and reset procedures to make more robust.  Lastly,
> provides an ethtool test for interrupts using the software interrupt.
> 
> Mitch provides some i40e patches which fixes up VF code in the PF
> driver, specifically the number of vectors per VF are reported by the
> hardware does not include vector 0, so we need to account for this
> when checking.  In addition, cleans up debugging messages.
> 
> Kamil provides an i40e patch to fix the diagnostics test by restricting
> the diagnostic test length.

Pulled, thanks a lot Jeff.

[net-next 00/15][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series contains updates to i40e only (again).

Jesse provides a fix for when tx_rings structure is NULL and we do not want
to panic. Then refactors the flow control set up and disables L2 flow control
by default.  Provides some trivial fixes as well as prevent compiler warnings.
Then to align to similar behaviour in ixgbe, use the total number of CPUs in
the system to suggest the number of transmit and receive queue pairs.

Shannon provides a i40e ethtool fix to get some more reasonable information
reports back out to the ethtool.  In addition, fixes PF reset after offline
test, where it reorders the test to put the register test last as it is the
only one that needs a reset, and we wait to trigger the reset until after we
clear the testing bit.  Lastly provides basic support for handling suspend
and resume for now, later on Wake-On-LAN support will be added.

Elizabeth Kappler adds netdev ops helper function.

Anjali provides changes to tell the stack about our actual number of queues
in order for RFS/RPS/XFS to work correctly.  Then provides several patches to
implement dynamically changing the queue count for the main VSI.  Adds
basic support for get/set channels for RSS so that the number of receive and
transmit queue pair can be changed via ethtool.  Cleans up the use of
rtnl_lock in the reset patch since it runs from a work time.

Neerav Parikh cleans up the VF interface to remove FCoE code as this
feature will not be supported on VF interfaces.

The following are changes since commit c45f812f0280c13f1b7992be5e0de512312a9e8f:
  8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Anjali Singhai Jain (6):
  i40e: Tell the stack about our actual number of queues
  i40e: reinit flow for the main VSI
  i40e: function to reconfigure RSS queues and rebuild
  i40e: debugfs command to change RSS queue count
  i40e: Add basic support for get/set channels for RSS
  i40e: rtnl_lock in reset path fixes

Elizabeth Kappler (1):
  i40e: add netdev ops helper function

Jesse Brandeburg (5):
  i40e: fix null dereference
  i40e: fix up some of the ethtool connection reporting
  i40e: init flow control settings to disabled
  i40e: trivial fixes
  i40e: use same number of queues as CPUs

Neerav Parikh (1):
  i40e: Remove FCoE in i40e_virtchnl_pf.c code

Shannon Nelson (2):
  i40e: fix pf reset after offline test
  i40e: support for suspend and resume

 drivers/net/ethernet/intel/i40e/i40e.h             |   6 +-
 drivers/net/ethernet/intel/i40e/i40e_debugfs.c     |  22 +-
 drivers/net/ethernet/intel/i40e/i40e_diag.c        |   2 +-
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c     | 146 +++++++-
 drivers/net/ethernet/intel/i40e/i40e_hmc.c         |   2 +-
 drivers/net/ethernet/intel/i40e/i40e_main.c        | 380 ++++++++++++++++++---
 drivers/net/ethernet/intel/i40e/i40e_type.h        |   4 +
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c |  29 +-
 8 files changed, 499 insertions(+), 92 deletions(-)

-- 
1.8.3.1

[net-next 00/15][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series contains updates to i40e only.

Anjali provides a patch to prevent messages from stray HMC events, except
at interrupt message level, and refactors the HMC error handling.

Catherine adds routines in probe to populate/check PCI bus speed and width,
then verify we are in a 8GT/s x8 PCIe slot and warn when we are not.

Shannon adds Wake-on-LAN support for i40e, fixes curly brace use as well as
return type for i40e_vsi_clear_rings().  Lastly implements the set_settings
and set_pauseparam ethtool functionality.

Joseph implements receive offload for VXLAN for i40e, where the hardware
supports checksum offload/verification of the inner/outer header.

Mitch provides the bulk of the changes, where he refactors the VF reset
code so that it works on real hardware.  Then does code cleanup by
calling existing functions to enable and disable queues for VFs and
remove unused functions.  Removes a unnecessary log messages that are
seen at every VF reset, for example complaining about disabling queues
that are already disabled.  Fixes an error return when the VF asks to
add an invalid MAC address and if the VF sends a bad message, make it
more informative about what is actually going on.

Jesse refactors the LED function to flash LED lights correctly.

The following are changes since commit 020e867c755610fa5a2a08a69707e636cf368b55:
  isdn: use strlcpy() instead strcpy()
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Anjali Singhai Jain (1):
  i40e: Suppress HMC error to Interrupt message level

Catherine Sullivan (1):
  i40e: Populate and check pci bus speed and width

Jesse Brandeburg (1):
  i40e: update led set args

Joseph Gasparakis (1):
  i40e: Rx checksum offload for VXLAN

Mitch Williams (8):
  i40e: move i40e_reset_vf
  i40e: refactor VF reset flow
  i40e: remove redundant code
  i40e: remove chatty log messages
  i40e: fix error return
  i40e: be more informative
  i40e: make a define from a large constant
  i40e: report VF MAC addresses correctly

Shannon Nelson (3):
  i40e: add wake-on-lan support
  i40e: fix curly brace use and return type
  i40e: add set settings and pauseparam

 drivers/net/ethernet/intel/i40e/i40e.h             |   3 +
 drivers/net/ethernet/intel/i40e/i40e_common.c      | 136 ++++-
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c     | 145 +++++-
 drivers/net/ethernet/intel/i40e/i40e_main.c        | 105 ++--
 drivers/net/ethernet/intel/i40e/i40e_prototype.h   |   3 +-
 drivers/net/ethernet/intel/i40e/i40e_txrx.c        |  56 ++-
 drivers/net/ethernet/intel/i40e/i40e_txrx.h        |  20 +
 drivers/net/ethernet/intel/i40e/i40e_type.h        |  61 ++-
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 559 ++++++---------------
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h |   2 +-
 10 files changed, 572 insertions(+), 518 deletions(-)

-- 
1.8.3.1

Re: [net-next 00/15][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

[-- Attachment #1: Type: text/plain, Size: 1897 bytes --]

On Wed, 2013-12-18 at 22:34 -0800, Jeff Kirsher wrote:
> This series contains updates to i40e only.
> 
> Anjali provides a patch to prevent messages from stray HMC events,
> except
> at interrupt message level, and refactors the HMC error handling.
> 
> Catherine adds routines in probe to populate/check PCI bus speed and
> width,
> then verify we are in a 8GT/s x8 PCIe slot and warn when we are not.
> 
> Shannon adds Wake-on-LAN support for i40e, fixes curly brace use as
> well as
> return type for i40e_vsi_clear_rings().  Lastly implements the
> set_settings
> and set_pauseparam ethtool functionality.
> 
> Joseph implements receive offload for VXLAN for i40e, where the
> hardware
> supports checksum offload/verification of the inner/outer header.
> 
> Mitch provides the bulk of the changes, where he refactors the VF
> reset
> code so that it works on real hardware.  Then does code cleanup by
> calling existing functions to enable and disable queues for VFs and
> remove unused functions.  Removes a unnecessary log messages that are
> seen at every VF reset, for example complaining about disabling queues
> that are already disabled.  Fixes an error return when the VF asks to
> add an invalid MAC address and if the VF sends a bad message, make it
> more informative about what is actually going on.
> 
> Jesse refactors the LED function to flash LED lights correctly.
> 
> The following are changes since commit
> 020e867c755610fa5a2a08a69707e636cf368b55:
>   isdn: use strlcpy() instead strcpy()
> and are available in the git repository at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next
> master

Dave-
Disregard this pull request.  I overlooked a patch that needs to either
precede this series or get added to the series for VXLAN.

I will be sending out a v2 with the necessary patch added.

Cheers,
Jeff

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [net-next 00/15][pull request] Intel Wired LAN Driver Updates

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Thu, 19 Dec 2013 11:20:36 -0800

> Disregard this pull request.  I overlooked a patch that needs to either
> precede this series or get added to the series for VXLAN.
> 
> I will be sending out a v2 with the necessary patch added.

Ok.

[net-next 00/15][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series contains updates to i40e only.

Anjali provides two cleanups to remove unnecessary code and a fix
to resolve debugfs dumping only half the NVM.  Then provides a fix
to ethtool NVM reads where shadow RAM was used instead of actual
NVM reads.

Jesse provides a couple of fixes, one removes custom i40e functions
which duplicate existing kernel functionality.  Second fixes constant
cast issues by replacing __constant_htons with htons.

Mitch provides a couple of fixes for the VF interfaces in i40e.  First
provides a fix to guard against VF message races with can cause a panic.
Second fix reinitializes the buffer size each time we clean the ARQ,
because subsequent messages can be truncated. Lastly adds functionality
to enable/disable ICR 0 dynamically.

Vasu adds a simple guard against multiple includes of the i40e_txrx.h
file.

Shannon provides a couple of fixes, first fix swaps a couple of lines
around in the error handling if the allocation for the VSI array fails.
Second fixes an issue where we try to free the q_vector that has not
been setup which can panic the kernel.

David provides a patch to save off the point to memory and the length
of 2 structs used in the admin queue in order to store all info about
allocated kernel memory.

Neerav fixes ring allocation where allocation and clearing of rings
for a VSI should be using the alloc_queue_pairs and not num_queue_pairs.
Then removes the unused define for multi-queue enabled.

The following are changes since commit a1d4b03a076d95edc88d070f7627a73ab80abddc:
  Merge branch 'bgmac'
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Anjali Singhai Jain (4):
  i40e: Dump the whole NVM, not half
  i40e: Change the ethtool NVM read method to use AQ
  i40e: Remove unnecessary prototypes
  i40e: remove un-necessary io-write

David Cassard (1):
  i40e: keep allocated memory in structs

Jesse Brandeburg (2):
  i40e: fix mac address checking
  i40e: fix constant cast issues

Mitch Williams (3):
  i40e: guard against vf message races
  i40e: use functions to enable and disable icr 0
  i40e: reinit buffer size each time

Neerav Parikh (2):
  i40e: Fix ring allocation
  i40e: I40E_FLAG_MQ_ENABLED is not used

Shannon Nelson (2):
  i40e: fix error handling when alloc of vsi array fails
  i40e: catch unset q_vector

Vasu Dev (1):
  i40e: add header file flag _I40E_TXRX_H_

 drivers/net/ethernet/intel/i40e/i40e.h             |  40 +++-----
 drivers/net/ethernet/intel/i40e/i40e_adminq.c      | 103 +++++++++------------
 drivers/net/ethernet/intel/i40e/i40e_adminq.h      |  13 +--
 drivers/net/ethernet/intel/i40e/i40e_common.c      |  27 ------
 drivers/net/ethernet/intel/i40e/i40e_debugfs.c     |   8 +-
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c     |  68 +++++++++-----
 drivers/net/ethernet/intel/i40e/i40e_main.c        |  47 +++++-----
 drivers/net/ethernet/intel/i40e/i40e_prototype.h   |   1 -
 drivers/net/ethernet/intel/i40e/i40e_txrx.c        |   8 +-
 drivers/net/ethernet/intel/i40e/i40e_txrx.h        |   4 +
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c |  28 +++---
 11 files changed, 162 insertions(+), 185 deletions(-)

-- 
1.8.3.1

Re: [net-next 00/15][pull request] Intel Wired LAN Driver Updates

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Sun,  5 Jan 2014 02:46:52 -0800

> This series contains updates to i40e only.
 ...
>   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Looks fine, pulled, thanks Jeff.

[net-next 00/15][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series contains updates to i40e only.

Majority of this series contains patches from Greg and Mitch to fix
up or add functionality to the PF/VF driver interactions.  Notably,
a fix for SR-IOV VF port VLAN which resolved the problem of port VLAN
configurations not being persistent across VF driver loads and unloads
and enable/disable of the feature.  Also do not enable the default port
on the VEB, which is designed only to bridge the PF to an Open vSwitch
or bridge.  Another fix to resolve a possible memory corruption
condition where ARQ messages are written to random memory locations.
Fix a problem where the 'ip link show' command would display stale
link address information after the link address was set via the 'ip
link set' command.

Anjali provides several patches, one which saves information that can
be used while cleaning the Tx ring and useful in detecting Tx hangs.
Then provides a fixes to the admin queue shutdown function to ensure
we are shutting down the queue in the shutdown path and ensure ASQ is
alive before issuing the admin queue command.

Shannon provides a fix for get/update vsi params where the incorrect
struct was being used.

The following are changes since commit b912b2f8fc71df4c3ffa7a9fe2c2227e8bcdaa07:
  net/mlx4_core: Warn if device doesn't have enough PCI bandwidth
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Anjali Singhai Jain (4):
  i40e: Record dma buffer info for dummy packets
  i40e: Admin queue shutdown fixes
  i40e: check asq alive before notify
  i40e: Do not allow AQ calls from ndo-ops

Greg Rose (4):
  i40e: Fix SR-IOV VF port VLAN
  i40e: Do not enable default port on the VEB
  i40e: Fix VF driver MAC address configuration
  i40e: Hide the Port VLAN VLAN ID

Jesse Brandeburg (1):
  i40e: fix whitespace

Mitch Williams (5):
  i40e: avoid unnecessary register read
  i40e: use struct assign instead of memcpy
  i40e: don't allocate zero size
  i40e: acknowledge VFLR when disabling SR-IOV
  i40e: support VFs on PFs other than 0

Shannon Nelson (1):
  i40e: use correct struct for get and update vsi params

 drivers/net/ethernet/intel/i40e/i40e_adminq.c      |   3 +
 drivers/net/ethernet/intel/i40e/i40e_common.c      |  75 ++++++++------
 drivers/net/ethernet/intel/i40e/i40e_debugfs.c     |   1 +
 drivers/net/ethernet/intel/i40e/i40e_main.c        |  45 ++++----
 drivers/net/ethernet/intel/i40e/i40e_prototype.h   |   5 +-
 drivers/net/ethernet/intel/i40e/i40e_txrx.c        |   9 +-
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 114 ++++++++++++++++-----
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h |   2 +
 8 files changed, 169 insertions(+), 85 deletions(-)

-- 
1.8.3.1

[net-next 01/15] i40e: Record dma buffer info for dummy packets

[Jeff Kirsher]

From: Anjali Singhai Jain <anjali.singhai@intel.com>

Save information that we can use while cleaning the tx ring. Also record
the time_stamp since we will need it to check tx hangs.

Change-Id: Ia3f1c17f6fec9bcb7fef2542d77eac7f6c4f115c
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_txrx.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 2584d6b..fac4fb3 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -77,7 +77,6 @@ int i40e_program_fdir_filter(struct i40e_fdir_data *fdir_data,
 	/* grab the next descriptor */
 	i = tx_ring->next_to_use;
 	fdir_desc = I40E_TX_FDIRDESC(tx_ring, i);
-	tx_buf = &tx_ring->tx_bi[i];
 
 	tx_ring->next_to_use = (i + 1 < tx_ring->count) ? i + 1 : 0;
 
@@ -129,15 +128,23 @@ int i40e_program_fdir_filter(struct i40e_fdir_data *fdir_data,
 	/* Now program a dummy descriptor */
 	i = tx_ring->next_to_use;
 	tx_desc = I40E_TX_DESC(tx_ring, i);
+	tx_buf = &tx_ring->tx_bi[i];
 
 	tx_ring->next_to_use = (i + 1 < tx_ring->count) ? i + 1 : 0;
 
+	/* record length, and DMA address */
+	dma_unmap_len_set(tx_buf, len, I40E_FDIR_MAX_RAW_PACKET_LOOKUP);
+	dma_unmap_addr_set(tx_buf, dma, dma);
+
 	tx_desc->buffer_addr = cpu_to_le64(dma);
 	td_cmd = I40E_TXD_CMD | I40E_TX_DESC_CMD_DUMMY;
 
 	tx_desc->cmd_type_offset_bsz =
 		build_ctob(td_cmd, 0, I40E_FDIR_MAX_RAW_PACKET_LOOKUP, 0);
 
+	/* set the timestamp */
+	tx_buf->time_stamp = jiffies;
+
 	/* Force memory writes to complete before letting h/w
 	 * know there are new descriptors to fetch.  (Only
 	 * applicable for weak-ordered memory model archs,
-- 
1.8.3.1

[net-next 02/15] i40e: Fix SR-IOV VF port VLAN

[Jeff Kirsher]

From: Greg Rose <gregory.v.rose@intel.com>

This patch fixes two different problems.
1) The port VLAN configuration was not persistent across VF driver
   loads and unloads.

2) The port VLAN configuration was only correct the first time it was
   set. Switching the port VLAN on and off would cause subsequent VLAN
   configurations to be corrupted in the VSI.  Ensure that the correct
   bits are being set for the VSI port VLAN configuration.

Change-Id: I7ebf5329f77eb8d73ccd3324eb346b3abeea737d
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c        |  8 +++++---
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 16 ++++++++++++++--
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h |  1 +
 3 files changed, 20 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 55fd23d..d0b2046 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -2016,8 +2016,9 @@ int i40e_vsi_add_pvid(struct i40e_vsi *vsi, u16 vid)
 
 	vsi->info.valid_sections = cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID);
 	vsi->info.pvid = cpu_to_le16(vid);
-	vsi->info.port_vlan_flags |= I40E_AQ_VSI_PVLAN_INSERT_PVID;
-	vsi->info.port_vlan_flags |= I40E_AQ_VSI_PVLAN_MODE_UNTAGGED;
+	vsi->info.port_vlan_flags = I40E_AQ_VSI_PVLAN_MODE_TAGGED |
+				    I40E_AQ_VSI_PVLAN_INSERT_PVID |
+				    I40E_AQ_VSI_PVLAN_EMOD_STR_BOTH;
 
 	ctxt.seid = vsi->seid;
 	memcpy(&ctxt.info, &vsi->info, sizeof(vsi->info));
@@ -2040,8 +2041,9 @@ int i40e_vsi_add_pvid(struct i40e_vsi *vsi, u16 vid)
  **/
 void i40e_vsi_remove_pvid(struct i40e_vsi *vsi)
 {
+	i40e_vlan_stripping_disable(vsi);
+
 	vsi->info.pvid = 0;
-	i40e_vlan_rx_register(vsi->netdev, vsi->netdev->features);
 }
 
 /**
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index 685b285..2c042a26 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -388,8 +388,16 @@ static int i40e_alloc_vsi_res(struct i40e_vf *vf, enum i40e_vsi_type type)
 		dev_info(&pf->pdev->dev,
 			 "LAN VSI index %d, VSI id %d\n",
 			 vsi->idx, vsi->id);
+		/* If the port VLAN has been configured and then the
+		 * VF driver was removed then the VSI port VLAN
+		 * configuration was destroyed.  Check if there is
+		 * a port VLAN and restore the VSI configuration if
+		 * needed.
+		 */
+		if (vf->port_vlan_id)
+			i40e_vsi_add_pvid(vsi, vf->port_vlan_id);
 		f = i40e_add_filter(vsi, vf->default_lan_addr.addr,
-				    0, true, false);
+				    vf->port_vlan_id, true, false);
 	}
 
 	if (!f) {
@@ -1958,7 +1966,7 @@ int i40e_ndo_set_vf_port_vlan(struct net_device *netdev,
 		ret = i40e_vsi_add_pvid(vsi,
 				vlan_id | (qos << I40E_VLAN_PRIORITY_SHIFT));
 	else
-		i40e_vlan_stripping_disable(vsi);
+		i40e_vsi_remove_pvid(vsi);
 
 	if (vlan_id) {
 		dev_info(&pf->pdev->dev, "Setting VLAN %d, QOS 0x%x on VF %d\n",
@@ -1978,6 +1986,10 @@ int i40e_ndo_set_vf_port_vlan(struct net_device *netdev,
 		dev_err(&pf->pdev->dev, "Unable to update VF vsi context\n");
 		goto error_pvid;
 	}
+	/* The Port VLAN needs to be saved across resets the same as the
+	 * default LAN MAC address.
+	 */
+	vf->port_vlan_id = le16_to_cpu(vsi->info.pvid);
 	ret = 0;
 
 error_pvid:
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h
index d0b712c..bf3384f 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h
@@ -82,6 +82,7 @@ struct i40e_vf {
 
 	struct i40e_virtchnl_ether_addr default_lan_addr;
 	struct i40e_virtchnl_ether_addr default_fcoe_addr;
+	u16 port_vlan_id;
 
 	/* VSI indices - actual VSI pointers are maintained in the PF structure
 	 * When assigned, these will be non-zero, because VSI 0 is always
-- 
1.8.3.1

[net-next 03/15] i40e: fix whitespace

[Jeff Kirsher]

From: Jesse Brandeburg <jesse.brandeburg@intel.com>

Trivial whitespace fix.

Change-Id: Ib7c70891a33c4b3d200c69367549d0dbdee0f076
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_debugfs.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
index 22fcf94..45bdcca 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
@@ -533,6 +533,7 @@ static void i40e_dbg_dump_vsi_seid(struct i40e_pf *pf, int seid)
 		struct i40e_ring *tx_ring = ACCESS_ONCE(vsi->tx_rings[i]);
 		if (!tx_ring)
 			continue;
+
 		dev_info(&pf->pdev->dev,
 			 "    tx_rings[%i]: desc = %p\n",
 			 i, tx_ring->desc);
-- 
1.8.3.1

[net-next 04/15] i40e: avoid unnecessary register read

[Jeff Kirsher]

From: Mitch Williams <mitch.a.williams@intel.com>

We don't need to read the base VF id. It's already stashed in the HW
struct.

Change-Id: Ib81e2f76fc40b12c966e014a856b481912cafefc
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index 2c042a26..bed6022 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -600,8 +600,7 @@ static int i40e_quiesce_vf_pci(struct i40e_vf *vf)
 	int vf_abs_id, i;
 	u32 reg;
 
-	reg = rd32(hw, I40E_PF_VT_PFALLOC);
-	vf_abs_id = vf->vf_id + (reg & I40E_PF_VT_PFALLOC_FIRSTVF_MASK);
+	vf_abs_id = vf->vf_id + hw->func_caps.vf_base_id;
 
 	wr32(hw, I40E_PF_PCI_CIAA,
 	     VF_DEVICE_STATUS | (vf_abs_id << I40E_PF_PCI_CIAA_VF_NUM_SHIFT));
-- 
1.8.3.1

[net-next 05/15] i40e: Do not enable default port on the VEB

[Jeff Kirsher]

From: Greg Rose <gregory.v.rose@intel.com>

Enabling the default port on the VEB causes all outgoing traffic from
virtual functions to be copied to the physical function.  The default
port is only supposed to be used if you wish to bridge the physical
function to a SW switch such as Open vSwitch or the Linux bridge. That
allows the SW switch to route traffic to VMs that are not using a
virtual function.

Eventually we'll want to implement the ndo_fdb_add, ndo_fdb_del, and
ndo_fdb_dump functions.  The ndo_fdb_add function would set the
default port on the VEB in those cases where the MAC/VLAN address
filters have overflowed.  Normally we would not want to use it.

Change-Id: I3990f0384fff2840c4e43bc0955dd0b701380852
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index d0b2046..c0d7fe6 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -6903,7 +6903,7 @@ void i40e_veb_release(struct i40e_veb *veb)
  **/
 static int i40e_add_veb(struct i40e_veb *veb, struct i40e_vsi *vsi)
 {
-	bool is_default = (vsi->idx == vsi->back->lan_vsi);
+	bool is_default = false;
 	bool is_cloud = false;
 	int ret;
 
-- 
1.8.3.1

[net-next 06/15] i40e: use struct assign instead of memcpy

[Jeff Kirsher]

From: Mitch Williams <mitch.a.williams@intel.com>

Use struct assignment rather than an expensive memory copy.

Change-Id: I1d18d510774dfd41a9c1250cdef238a4187528f5
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index bed6022..f92404c 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -1310,7 +1310,7 @@ static int i40e_vc_get_stats_msg(struct i40e_vf *vf, u8 *msg, u16 msglen)
 		goto error_param;
 	}
 	i40e_update_eth_stats(vsi);
-	memcpy(&stats, &vsi->eth_stats, sizeof(struct i40e_eth_stats));
+	stats = vsi->eth_stats;
 
 error_param:
 	/* send the response back to the vf */
-- 
1.8.3.1

[net-next 07/15] i40e: don't allocate zero size

[Jeff Kirsher]

From: Mitch Williams <mitch.a.williams@intel.com>

Shockingly, the compiler didn't flag this uninitialized variable. This
fixes a potential memory corruption condition where ARQ messages are
written to random memory locations.

Change-Id: Iac82f4562d2bf3f42df3f3b2163d9cbed2160135
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index c0d7fe6..40484e0 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -4492,6 +4492,7 @@ static void i40e_clean_adminq_subtask(struct i40e_pf *pf)
 	if (!test_bit(__I40E_ADMINQ_EVENT_PENDING, &pf->state))
 		return;
 
+	event.msg_size = I40E_MAX_AQ_BUF_SIZE;
 	event.msg_buf = kzalloc(event.msg_size, GFP_KERNEL);
 	if (!event.msg_buf)
 		return;
-- 
1.8.3.1

[net-next 08/15] i40e: acknowledge VFLR when disabling SR-IOV

[Jeff Kirsher]

From: Mitch Williams <mitch.a.williams@intel.com>

When SR-IOV is disabled, the (now nonexistent) virtual function
devices undergo a VFLR event. We don't need to handle this event
because the VFs are gone, but we do need to tell the HW that they are
complete. This fixes an issue with a phantom VFLR and broken VFs when
SR-IOV is re-enabled.

Change-Id: I7580b49ded0158172a85b14661ec212af77000c8
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index f92404c..e91f9d7 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -726,7 +726,9 @@ static bool i40e_vfs_are_assigned(struct i40e_pf *pf)
  **/
 void i40e_free_vfs(struct i40e_pf *pf)
 {
-	int i, tmp;
+	struct i40e_hw *hw = &pf->hw;
+	u32 reg_idx, bit_idx;
+	int i, tmp, vf_id;
 
 	if (!pf->vf)
 		return;
@@ -748,8 +750,17 @@ void i40e_free_vfs(struct i40e_pf *pf)
 	kfree(pf->vf);
 	pf->vf = NULL;
 
-	if (!i40e_vfs_are_assigned(pf))
+	if (!i40e_vfs_are_assigned(pf)) {
 		pci_disable_sriov(pf->pdev);
+		/* Acknowledge VFLR for all VFS. Without this, VFs will fail to
+		 * work correctly when SR-IOV gets re-enabled.
+		 */
+		for (vf_id = 0; vf_id < tmp; vf_id++) {
+			reg_idx = (hw->func_caps.vf_base_id + vf_id) / 32;
+			bit_idx = (hw->func_caps.vf_base_id + vf_id) % 32;
+			wr32(hw, I40E_GLGEN_VFLRSTAT(reg_idx), (1 << bit_idx));
+		}
+	}
 	else
 		dev_warn(&pf->pdev->dev,
 			 "unable to disable SR-IOV because VFs are assigned.\n");
-- 
1.8.3.1

[net-next 09/15] i40e: support VFs on PFs other than 0

[Jeff Kirsher]

From: Mitch Williams <mitch.a.williams@intel.com>

When communicating with VF devices over the AQ, the FW refers to the
VF by its global VF ID, not local the VF ID with reference to its
parent PF. Since the global and local VF IDs are identical for PF 0,
the code worked correctly on PF 0.

However, we cannot just use global IDs throughout the code as most of
the other references to the VF (VSI setup, register offsets, etc.)
require the local VF ID. Instead, we just add or subtract our base VF
ID when sending and receiving AQ messages.

Change-Id: I92f4332b4876bc68b2f9af9ebf48761f63b6bd97
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index e91f9d7..a983858 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -903,6 +903,7 @@ static int i40e_vc_send_msg_to_vf(struct i40e_vf *vf, u32 v_opcode,
 {
 	struct i40e_pf *pf = vf->pf;
 	struct i40e_hw *hw = &pf->hw;
+	int true_vf_id = vf->vf_id + hw->func_caps.vf_base_id;
 	i40e_status aq_ret;
 
 	/* single place to detect unsuccessful return values */
@@ -922,8 +923,8 @@ static int i40e_vc_send_msg_to_vf(struct i40e_vf *vf, u32 v_opcode,
 		vf->num_valid_msgs++;
 	}
 
-	aq_ret = i40e_aq_send_msg_to_vf(hw, vf->vf_id, v_opcode, v_retval,
-				     msg, msglen, NULL);
+	aq_ret = i40e_aq_send_msg_to_vf(hw, true_vf_id,	v_opcode, v_retval,
+					msg, msglen, NULL);
 	if (aq_ret) {
 		dev_err(&pf->pdev->dev,
 			"Unable to send the message to VF %d aq_err %d\n",
@@ -1664,22 +1665,23 @@ int i40e_vc_process_vf_msg(struct i40e_pf *pf, u16 vf_id, u32 v_opcode,
 			   u32 v_retval, u8 *msg, u16 msglen)
 {
 	struct i40e_hw *hw = &pf->hw;
+	int local_vf_id = vf_id - hw->func_caps.vf_base_id;
 	struct i40e_vf *vf;
 	int ret;
 
 	pf->vf_aq_requests++;
-	if (vf_id >= pf->num_alloc_vfs)
+	if (local_vf_id >= pf->num_alloc_vfs)
 		return -EINVAL;
-	vf = &(pf->vf[vf_id]);
+	vf = &(pf->vf[local_vf_id]);
 	/* perform basic checks on the msg */
 	ret = i40e_vc_validate_vf_msg(vf, v_opcode, v_retval, msg, msglen);
 
 	if (ret) {
 		dev_err(&pf->pdev->dev, "Invalid message from vf %d, opcode %d, len %d\n",
-			vf_id, v_opcode, msglen);
+			local_vf_id, v_opcode, msglen);
 		return ret;
 	}
-	wr32(hw, I40E_VFGEN_RSTAT1(vf_id), I40E_VFR_VFACTIVE);
+	wr32(hw, I40E_VFGEN_RSTAT1(local_vf_id), I40E_VFR_VFACTIVE);
 	switch (v_opcode) {
 	case I40E_VIRTCHNL_OP_VERSION:
 		ret = i40e_vc_get_version_msg(vf);
@@ -1723,8 +1725,8 @@ int i40e_vc_process_vf_msg(struct i40e_pf *pf, u16 vf_id, u32 v_opcode,
 		break;
 	case I40E_VIRTCHNL_OP_UNKNOWN:
 	default:
-		dev_err(&pf->pdev->dev,
-			"Unsupported opcode %d from vf %d\n", v_opcode, vf_id);
+		dev_err(&pf->pdev->dev, "Unsupported opcode %d from vf %d\n",
+			v_opcode, local_vf_id);
 		ret = i40e_vc_send_resp_to_vf(vf, v_opcode,
 					      I40E_ERR_NOT_IMPLEMENTED);
 		break;
-- 
1.8.3.1

[net-next 10/15] i40e: Fix VF driver MAC address configuration

[Jeff Kirsher]

From: Greg Rose <gregory.v.rose@intel.com>

Fix a problem where the 'ip link show' command would display stale
link address information after the link address was set via the 'ip
link set' command.  In addition, fix problem with the user being
allowed to overwrite the administratively set VF MAC address.

Change-Id: I669ed14e55f2b633ef7b456b713632b08468671c
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 60 +++++++++++++++++-----
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h |  1 +
 2 files changed, 48 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index a983858..55ec2db 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -1331,6 +1331,37 @@ error_param:
 }
 
 /**
+ * i40e_check_vf_permission
+ * @vf: pointer to the vf info
+ * @macaddr: pointer to the MAC Address being checked
+ *
+ * Check if the VF has permission to add or delete unicast MAC address
+ * filters and return error code -EPERM if not.  Then check if the
+ * address filter requested is broadcast or zero and if so return
+ * an invalid MAC address error code.
+ **/
+static inline int i40e_check_vf_permission(struct i40e_vf *vf, u8 *macaddr)
+{
+	struct i40e_pf *pf = vf->pf;
+	int ret = 0;
+
+	if (is_broadcast_ether_addr(macaddr) ||
+		   is_zero_ether_addr(macaddr)) {
+		dev_err(&pf->pdev->dev, "invalid VF MAC addr %pM\n", macaddr);
+		ret = I40E_ERR_INVALID_MAC_ADDR;
+	} else if (vf->pf_set_mac && !is_multicast_ether_addr(macaddr)) {
+		/* If the host VMM administrator has set the VF MAC address
+		 * administratively via the ndo_set_vf_mac command then deny
+		 * permission to the VF to add or delete unicast MAC addresses.
+		 */
+		dev_err(&pf->pdev->dev,
+			"VF attempting to override administratively set MAC address\nPlease reload the VF driver to resume normal operation\n");
+		ret = -EPERM;
+	}
+	return ret;
+}
+
+/**
  * i40e_vc_add_mac_addr_msg
  * @vf: pointer to the vf info
  * @msg: pointer to the msg buffer
@@ -1345,24 +1376,20 @@ static int i40e_vc_add_mac_addr_msg(struct i40e_vf *vf, u8 *msg, u16 msglen)
 	struct i40e_pf *pf = vf->pf;
 	struct i40e_vsi *vsi = NULL;
 	u16 vsi_id = al->vsi_id;
-	i40e_status aq_ret = 0;
+	i40e_status ret = 0;
 	int i;
 
 	if (!test_bit(I40E_VF_STAT_ACTIVE, &vf->vf_states) ||
 	    !test_bit(I40E_VIRTCHNL_VF_CAP_PRIVILEGE, &vf->vf_caps) ||
 	    !i40e_vc_isvalid_vsi_id(vf, vsi_id)) {
-		aq_ret = I40E_ERR_PARAM;
+		ret = I40E_ERR_PARAM;
 		goto error_param;
 	}
 
 	for (i = 0; i < al->num_elements; i++) {
-		if (is_broadcast_ether_addr(al->list[i].addr) ||
-		    is_zero_ether_addr(al->list[i].addr)) {
-			dev_err(&pf->pdev->dev, "invalid VF MAC addr %pMAC\n",
-				al->list[i].addr);
-			aq_ret = I40E_ERR_INVALID_MAC_ADDR;
+		ret = i40e_check_vf_permission(vf, al->list[i].addr);
+		if (ret)
 			goto error_param;
-		}
 	}
 	vsi = pf->vsi[vsi_id];
 
@@ -1383,7 +1410,7 @@ static int i40e_vc_add_mac_addr_msg(struct i40e_vf *vf, u8 *msg, u16 msglen)
 		if (!f) {
 			dev_err(&pf->pdev->dev,
 				"Unable to add VF MAC filter\n");
-			aq_ret = I40E_ERR_PARAM;
+			ret = I40E_ERR_PARAM;
 			goto error_param;
 		}
 	}
@@ -1395,7 +1422,7 @@ static int i40e_vc_add_mac_addr_msg(struct i40e_vf *vf, u8 *msg, u16 msglen)
 error_param:
 	/* send the response to the vf */
 	return i40e_vc_send_resp_to_vf(vf, I40E_VIRTCHNL_OP_ADD_ETHER_ADDRESS,
-				       aq_ret);
+				       ret);
 }
 
 /**
@@ -1413,15 +1440,21 @@ static int i40e_vc_del_mac_addr_msg(struct i40e_vf *vf, u8 *msg, u16 msglen)
 	struct i40e_pf *pf = vf->pf;
 	struct i40e_vsi *vsi = NULL;
 	u16 vsi_id = al->vsi_id;
-	i40e_status aq_ret = 0;
+	i40e_status ret = 0;
 	int i;
 
 	if (!test_bit(I40E_VF_STAT_ACTIVE, &vf->vf_states) ||
 	    !test_bit(I40E_VIRTCHNL_VF_CAP_PRIVILEGE, &vf->vf_caps) ||
 	    !i40e_vc_isvalid_vsi_id(vf, vsi_id)) {
-		aq_ret = I40E_ERR_PARAM;
+		ret = I40E_ERR_PARAM;
 		goto error_param;
 	}
+
+	for (i = 0; i < al->num_elements; i++) {
+		ret = i40e_check_vf_permission(vf, al->list[i].addr);
+		if (ret)
+			goto error_param;
+	}
 	vsi = pf->vsi[vsi_id];
 
 	/* delete addresses from the list */
@@ -1436,7 +1469,7 @@ static int i40e_vc_del_mac_addr_msg(struct i40e_vf *vf, u8 *msg, u16 msglen)
 error_param:
 	/* send the response to the vf */
 	return i40e_vc_send_resp_to_vf(vf, I40E_VIRTCHNL_OP_DEL_ETHER_ADDRESS,
-				       aq_ret);
+				       ret);
 }
 
 /**
@@ -1918,6 +1951,7 @@ int i40e_ndo_set_vf_mac(struct net_device *netdev, int vf_id, u8 *mac)
 		goto error_param;
 	}
 	memcpy(vf->default_lan_addr.addr, mac, ETH_ALEN);
+	vf->pf_set_mac = true;
 	dev_info(&pf->pdev->dev, "Reload the VF driver to make this change effective.\n");
 	ret = 0;
 
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h
index bf3384f..8d0f4dd 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h
@@ -83,6 +83,7 @@ struct i40e_vf {
 	struct i40e_virtchnl_ether_addr default_lan_addr;
 	struct i40e_virtchnl_ether_addr default_fcoe_addr;
 	u16 port_vlan_id;
+	bool pf_set_mac;	/* The VMM admin set the VF MAC address */
 
 	/* VSI indices - actual VSI pointers are maintained in the PF structure
 	 * When assigned, these will be non-zero, because VSI 0 is always
-- 
1.8.3.1

[net-next 11/15] i40e: use correct struct for get and update vsi params

[Jeff Kirsher]

From: Shannon Nelson <shannon.nelson@intel.com>

The get_vsi_params and update_vsi_params functions were using a
different command struct that just happened to have an seid element in
the right place and so worked correctly anyway.  This patch fixes the
functions to use the right data struct.

There is no actual logic change.

Change-Id: I513b5e1dc293dfd5b2ba4fa443cbdbfa608d9d19
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_common.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c
index e5694b9..161d6ff 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_common.c
@@ -748,8 +748,8 @@ i40e_status i40e_aq_get_vsi_params(struct i40e_hw *hw,
 				struct i40e_asq_cmd_details *cmd_details)
 {
 	struct i40e_aq_desc desc;
-	struct i40e_aqc_switch_seid *cmd =
-		(struct i40e_aqc_switch_seid *)&desc.params.raw;
+	struct i40e_aqc_add_get_update_vsi *cmd =
+		(struct i40e_aqc_add_get_update_vsi *)&desc.params.raw;
 	struct i40e_aqc_add_get_update_vsi_completion *resp =
 		(struct i40e_aqc_add_get_update_vsi_completion *)
 		&desc.params.raw;
@@ -758,7 +758,7 @@ i40e_status i40e_aq_get_vsi_params(struct i40e_hw *hw,
 	i40e_fill_default_direct_cmd_desc(&desc,
 					  i40e_aqc_opc_get_vsi_parameters);
 
-	cmd->seid = cpu_to_le16(vsi_ctx->seid);
+	cmd->uplink_seid = cpu_to_le16(vsi_ctx->seid);
 
 	desc.flags |= cpu_to_le16((u16)I40E_AQ_FLAG_BUF);
 	if (sizeof(vsi_ctx->info) > I40E_AQ_LARGE_BUF)
@@ -792,13 +792,13 @@ i40e_status i40e_aq_update_vsi_params(struct i40e_hw *hw,
 				struct i40e_asq_cmd_details *cmd_details)
 {
 	struct i40e_aq_desc desc;
-	struct i40e_aqc_switch_seid *cmd =
-		(struct i40e_aqc_switch_seid *)&desc.params.raw;
+	struct i40e_aqc_add_get_update_vsi *cmd =
+		(struct i40e_aqc_add_get_update_vsi *)&desc.params.raw;
 	i40e_status status;
 
 	i40e_fill_default_direct_cmd_desc(&desc,
 					  i40e_aqc_opc_update_vsi_parameters);
-	cmd->seid = cpu_to_le16(vsi_ctx->seid);
+	cmd->uplink_seid = cpu_to_le16(vsi_ctx->seid);
 
 	desc.flags |= cpu_to_le16((u16)(I40E_AQ_FLAG_BUF | I40E_AQ_FLAG_RD));
 	if (sizeof(vsi_ctx->info) > I40E_AQ_LARGE_BUF)
-- 
1.8.3.1

[net-next 12/15] i40e: Hide the Port VLAN VLAN ID

[Jeff Kirsher]

From: Greg Rose <gregory.v.rose@intel.com>

The VF VSI Port VLAN settings still allow the user to view VLAN tag in
the descriptor.  Fix the settings to hide the VLAN ID from the VF. The
VF is not supposed to be aware it is on a VLAN in the Port VLAN
scenario.

Change-Id: I976f2bacb455dbb750f8c53a781c689f02cb8907
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 40484e0..9c16aa8 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -2018,7 +2018,7 @@ int i40e_vsi_add_pvid(struct i40e_vsi *vsi, u16 vid)
 	vsi->info.pvid = cpu_to_le16(vid);
 	vsi->info.port_vlan_flags = I40E_AQ_VSI_PVLAN_MODE_TAGGED |
 				    I40E_AQ_VSI_PVLAN_INSERT_PVID |
-				    I40E_AQ_VSI_PVLAN_EMOD_STR_BOTH;
+				    I40E_AQ_VSI_PVLAN_EMOD_STR;
 
 	ctxt.seid = vsi->seid;
 	memcpy(&ctxt.info, &vsi->info, sizeof(vsi->info));
-- 
1.8.3.1

[net-next 13/15] i40e: Admin queue shutdown fixes

[Jeff Kirsher]

From: Anjali Singhai Jain <anjali.singhai@intel.com>

Always call the AQ call to shutdown the queue in the shutdown path.

Check ASQ is alive before issuing the AQ command since we might be
resetting to recover from a bad state in which case we should not
issue the AQ command.

Use the register variable for length so it can be used by PF, VF
and GL AQ commands.

Change-Id: Ic3d305687ea3f1a6afa84e864b7a27bd38a9af32
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_adminq.c    |  3 ++
 drivers/net/ethernet/intel/i40e/i40e_common.c    | 63 ++++++++++++++----------
 drivers/net/ethernet/intel/i40e/i40e_main.c      |  1 -
 drivers/net/ethernet/intel/i40e/i40e_prototype.h |  5 +-
 4 files changed, 44 insertions(+), 28 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq.c b/drivers/net/ethernet/intel/i40e/i40e_adminq.c
index d04ad3b..f75b573 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_adminq.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_adminq.c
@@ -609,6 +609,9 @@ i40e_status i40e_shutdown_adminq(struct i40e_hw *hw)
 {
 	i40e_status ret_code = 0;
 
+	if (i40e_check_asq_alive(hw))
+		i40e_aq_queue_shutdown(hw, true);
+
 	i40e_shutdown_asq(hw);
 	i40e_shutdown_arq(hw);
 
diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c
index 161d6ff..7cd59ce 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_common.c
@@ -126,6 +126,44 @@ void i40e_debug_aq(struct i40e_hw *hw, enum i40e_debug_mask mask, void *desc,
 }
 
 /**
+ * i40e_check_asq_alive
+ * @hw: pointer to the hw struct
+ *
+ * Returns true if Queue is enabled else false.
+ **/
+bool i40e_check_asq_alive(struct i40e_hw *hw)
+{
+	return !!(rd32(hw, hw->aq.asq.len) & I40E_PF_ATQLEN_ATQENABLE_MASK);
+}
+
+/**
+ * i40e_aq_queue_shutdown
+ * @hw: pointer to the hw struct
+ * @unloading: is the driver unloading itself
+ *
+ * Tell the Firmware that we're shutting down the AdminQ and whether
+ * or not the driver is unloading as well.
+ **/
+i40e_status i40e_aq_queue_shutdown(struct i40e_hw *hw,
+					     bool unloading)
+{
+	struct i40e_aq_desc desc;
+	struct i40e_aqc_queue_shutdown *cmd =
+		(struct i40e_aqc_queue_shutdown *)&desc.params.raw;
+	i40e_status status;
+
+	i40e_fill_default_direct_cmd_desc(&desc,
+					  i40e_aqc_opc_queue_shutdown);
+
+	if (unloading)
+		cmd->driver_unloading = cpu_to_le32(I40E_AQ_DRIVER_UNLOADING);
+	status = i40e_asq_send_command(hw, &desc, NULL, 0, NULL);
+
+	return status;
+}
+
+
+/**
  * i40e_init_shared_code - Initialize the shared code
  * @hw: pointer to hardware structure
  *
@@ -478,31 +516,6 @@ void i40e_led_set(struct i40e_hw *hw, u32 mode, bool blink)
 }
 
 /* Admin command wrappers */
-/**
- * i40e_aq_queue_shutdown
- * @hw: pointer to the hw struct
- * @unloading: is the driver unloading itself
- *
- * Tell the Firmware that we're shutting down the AdminQ and whether
- * or not the driver is unloading as well.
- **/
-i40e_status i40e_aq_queue_shutdown(struct i40e_hw *hw,
-					     bool unloading)
-{
-	struct i40e_aq_desc desc;
-	struct i40e_aqc_queue_shutdown *cmd =
-		(struct i40e_aqc_queue_shutdown *)&desc.params.raw;
-	i40e_status status;
-
-	i40e_fill_default_direct_cmd_desc(&desc,
-					  i40e_aqc_opc_queue_shutdown);
-
-	if (unloading)
-		cmd->driver_unloading = cpu_to_le32(I40E_AQ_DRIVER_UNLOADING);
-	status = i40e_asq_send_command(hw, &desc, NULL, 0, NULL);
-
-	return status;
-}
 
 /**
  * i40e_aq_set_link_restart_an
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 9c16aa8..c97fc0c 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -7854,7 +7854,6 @@ static void i40e_remove(struct pci_dev *pdev)
 			 "Failed to destroy the HMC resources: %d\n", ret_code);
 
 	/* shutdown the adminq */
-	i40e_aq_queue_shutdown(&pf->hw, true);
 	ret_code = i40e_shutdown_adminq(&pf->hw);
 	if (ret_code)
 		dev_warn(&pdev->dev,
diff --git a/drivers/net/ethernet/intel/i40e/i40e_prototype.h b/drivers/net/ethernet/intel/i40e/i40e_prototype.h
index 800f3c8..e05d303 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_prototype.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_prototype.h
@@ -59,6 +59,9 @@ void i40e_debug_aq(struct i40e_hw *hw,
 		   void *buffer);
 
 void i40e_idle_aq(struct i40e_hw *hw);
+bool i40e_check_asq_alive(struct i40e_hw *hw);
+i40e_status i40e_aq_queue_shutdown(struct i40e_hw *hw,
+				   bool unloading);
 
 u32 i40e_led_get(struct i40e_hw *hw);
 void i40e_led_set(struct i40e_hw *hw, u32 mode, bool blink);
@@ -69,8 +72,6 @@ i40e_status i40e_aq_get_firmware_version(struct i40e_hw *hw,
 				u16 *fw_major_version, u16 *fw_minor_version,
 				u16 *api_major_version, u16 *api_minor_version,
 				struct i40e_asq_cmd_details *cmd_details);
-i40e_status i40e_aq_queue_shutdown(struct i40e_hw *hw,
-					     bool unloading);
 i40e_status i40e_aq_set_phy_reset(struct i40e_hw *hw,
 				struct i40e_asq_cmd_details *cmd_details);
 i40e_status i40e_aq_set_default_vsi(struct i40e_hw *hw, u16 vsi_id,
-- 
1.8.3.1

[net-next 14/15] i40e: check asq alive before notify

[Jeff Kirsher]

From: Anjali Singhai Jain <anjali.singhai@intel.com>

Driver needs to make sure the send queue is alive before
trying to use it.

Chagne-Id: I9bd1f6159c45c98e63f562e3a8dfb57edfe50e13
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index c97fc0c..fd24ee4 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -4776,7 +4776,8 @@ static int i40e_prep_for_reset(struct i40e_pf *pf)
 
 	dev_info(&pf->pdev->dev, "Tearing down internal switch for reset\n");
 
-	i40e_vc_notify_reset(pf);
+	if (i40e_check_asq_alive(hw))
+		i40e_vc_notify_reset(pf);
 
 	/* quiesce the VSIs and their queues that are not already DOWN */
 	i40e_pf_quiesce_all_vsi(pf);
-- 
1.8.3.1

[net-next 15/15] i40e: Do not allow AQ calls from ndo-ops

[Jeff Kirsher]

From: Anjali Singhai Jain <anjali.singhai@intel.com>

If the device is not in a working state avoid making admin
queue (AQ) calls that rely on a working AQ.

Change-Id: Ifbba6d257b3a5b51bfe92938c04088c0baa21433
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 30 +++++++++++++----------------
 1 file changed, 13 insertions(+), 17 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index fd24ee4..483126c 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -1215,6 +1215,10 @@ static int i40e_set_mac(struct net_device *netdev, void *p)
 	if (ether_addr_equal(netdev->dev_addr, addr->sa_data))
 		return 0;
 
+	if (test_bit(__I40E_DOWN, &vsi->back->state) ||
+	    test_bit(__I40E_RESET_RECOVERY_PENDING, &vsi->back->state))
+		return -EADDRNOTAVAIL;
+
 	if (vsi->type == I40E_VSI_MAIN) {
 		i40e_status ret;
 		ret = i40e_aq_mac_address_write(&vsi->back->hw,
@@ -1779,7 +1783,6 @@ int i40e_vsi_add_vlan(struct i40e_vsi *vsi, s16 vid)
 {
 	struct i40e_mac_filter *f, *add_f;
 	bool is_netdev, is_vf;
-	int ret;
 
 	is_vf = (vsi->type == I40E_VSI_SRIOV);
 	is_netdev = !!(vsi->netdev);
@@ -1805,13 +1808,6 @@ int i40e_vsi_add_vlan(struct i40e_vsi *vsi, s16 vid)
 		}
 	}
 
-	ret = i40e_sync_vsi_filters(vsi);
-	if (ret) {
-		dev_info(&vsi->back->pdev->dev,
-			 "Could not sync filters for vid %d\n", vid);
-		return ret;
-	}
-
 	/* Now if we add a vlan tag, make sure to check if it is the first
 	 * tag (i.e. a "tag" -1 does exist) and if so replace the -1 "tag"
 	 * with 0, so we now accept untagged and specified tagged traffic
@@ -1848,10 +1844,13 @@ int i40e_vsi_add_vlan(struct i40e_vsi *vsi, s16 vid)
 				}
 			}
 		}
-		ret = i40e_sync_vsi_filters(vsi);
 	}
 
-	return ret;
+	if (test_bit(__I40E_DOWN, &vsi->back->state) ||
+	    test_bit(__I40E_RESET_RECOVERY_PENDING, &vsi->back->state))
+		return 0;
+
+	return i40e_sync_vsi_filters(vsi);
 }
 
 /**
@@ -1867,7 +1866,6 @@ int i40e_vsi_kill_vlan(struct i40e_vsi *vsi, s16 vid)
 	struct i40e_mac_filter *f, *add_f;
 	bool is_vf, is_netdev;
 	int filter_count = 0;
-	int ret;
 
 	is_vf = (vsi->type == I40E_VSI_SRIOV);
 	is_netdev = !!(netdev);
@@ -1878,12 +1876,6 @@ int i40e_vsi_kill_vlan(struct i40e_vsi *vsi, s16 vid)
 	list_for_each_entry(f, &vsi->mac_filter_list, list)
 		i40e_del_filter(vsi, f->macaddr, vid, is_vf, is_netdev);
 
-	ret = i40e_sync_vsi_filters(vsi);
-	if (ret) {
-		dev_info(&vsi->back->pdev->dev, "Could not sync filters\n");
-		return ret;
-	}
-
 	/* go through all the filters for this VSI and if there is only
 	 * vid == 0 it means there are no other filters, so vid 0 must
 	 * be replaced with -1. This signifies that we should from now
@@ -1926,6 +1918,10 @@ int i40e_vsi_kill_vlan(struct i40e_vsi *vsi, s16 vid)
 		}
 	}
 
+	if (test_bit(__I40E_DOWN, &vsi->back->state) ||
+	    test_bit(__I40E_RESET_RECOVERY_PENDING, &vsi->back->state))
+		return 0;
+
 	return i40e_sync_vsi_filters(vsi);
 }
 
-- 
1.8.3.1

Re: [net-next 08/15] i40e: acknowledge VFLR when disabling SR-IOV

[Sergei Shtylyov]

On 06.01.2014 16:30, Jeff Kirsher wrote:

> From: Mitch Williams <mitch.a.williams@intel.com>

> When SR-IOV is disabled, the (now nonexistent) virtual function
> devices undergo a VFLR event. We don't need to handle this event
> because the VFs are gone, but we do need to tell the HW that they are
> complete. This fixes an issue with a phantom VFLR and broken VFs when
> SR-IOV is re-enabled.

> Change-Id: I7580b49ded0158172a85b14661ec212af77000c8
> Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
> Tested-by: Sibai Li <sibai.li@intel.com>
> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
> ---
>   drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 15 +++++++++++++--
>   1 file changed, 13 insertions(+), 2 deletions(-)

> diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
> index f92404c..e91f9d7 100644
> --- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
> +++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
[...]
> @@ -748,8 +750,17 @@ void i40e_free_vfs(struct i40e_pf *pf)
>   	kfree(pf->vf);
>   	pf->vf = NULL;
>
> -	if (!i40e_vfs_are_assigned(pf))
> +	if (!i40e_vfs_are_assigned(pf)) {
>   		pci_disable_sriov(pf->pdev);
> +		/* Acknowledge VFLR for all VFS. Without this, VFs will fail to
> +		 * work correctly when SR-IOV gets re-enabled.
> +		 */
> +		for (vf_id = 0; vf_id < tmp; vf_id++) {
> +			reg_idx = (hw->func_caps.vf_base_id + vf_id) / 32;
> +			bit_idx = (hw->func_caps.vf_base_id + vf_id) % 32;
> +			wr32(hw, I40E_GLGEN_VFLRSTAT(reg_idx), (1 << bit_idx));
> +		}
> +	}
>   	else

    } and *else* should be on the same line. And the *else* arm should also 
have {} now.

>   		dev_warn(&pf->pdev->dev,
>   			 "unable to disable SR-IOV because VFs are assigned.\n");

WBR, Sergei

RE: [net-next 08/15] i40e: acknowledge VFLR when disabling SR-IOV

[Williams, Mitch A]

> -----Original Message-----
> From: Sergei Shtylyov [mailto:sergei.shtylyov@cogentembedded.com]
> Sent: Monday, January 06, 2014 8:43 AM
> To: Kirsher, Jeffrey T; Williams, Mitch A
> Cc: davem@davemloft.net; netdev@vger.kernel.org; gospo@redhat.com;
> sassmann@redhat.com; Brandeburg, Jesse
> Subject: Re: [net-next 08/15] i40e: acknowledge VFLR when disabling SR-IOV
> 
> On 06.01.2014 16:30, Jeff Kirsher wrote:
> 
> > From: Mitch Williams <mitch.a.williams@intel.com>
> 
> > When SR-IOV is disabled, the (now nonexistent) virtual function
> > devices undergo a VFLR event. We don't need to handle this event
> > because the VFs are gone, but we do need to tell the HW that they are
> > complete. This fixes an issue with a phantom VFLR and broken VFs when
> > SR-IOV is re-enabled.
> 
> > Change-Id: I7580b49ded0158172a85b14661ec212af77000c8
> > Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
> > Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
> > Tested-by: Sibai Li <sibai.li@intel.com>
> > Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
> > ---
> >   drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 15 +++++++++++++--
> >   1 file changed, 13 insertions(+), 2 deletions(-)
> 
> > diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
> b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
> > index f92404c..e91f9d7 100644
> > --- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
> > +++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
> [...]
> > @@ -748,8 +750,17 @@ void i40e_free_vfs(struct i40e_pf *pf)
> >   	kfree(pf->vf);
> >   	pf->vf = NULL;
> >
> > -	if (!i40e_vfs_are_assigned(pf))
> > +	if (!i40e_vfs_are_assigned(pf)) {
> >   		pci_disable_sriov(pf->pdev);
> > +		/* Acknowledge VFLR for all VFS. Without this, VFs will fail to
> > +		 * work correctly when SR-IOV gets re-enabled.
> > +		 */
> > +		for (vf_id = 0; vf_id < tmp; vf_id++) {
> > +			reg_idx = (hw->func_caps.vf_base_id + vf_id) / 32;
> > +			bit_idx = (hw->func_caps.vf_base_id + vf_id) % 32;
> > +			wr32(hw, I40E_GLGEN_VFLRSTAT(reg_idx), (1 << bit_idx));
> > +		}
> > +	}
> >   	else
> 
>     } and *else* should be on the same line. And the *else* arm should also
> have {} now.
> 
> >   		dev_warn(&pf->pdev->dev,
> >   			 "unable to disable SR-IOV because VFs are assigned.\n");
> 
> WBR, Sergei

You are absolutely correct, Sergei, and I apologize for not seeing this before I submitted the patch.

There will be a patch coming from Greg Rose in the next few weeks that will fix this problem in the process of adding a bug fix. Since this is just cosmetic, would it be all right with you if we just wait for Greg's patch to come through?

-Mitch

Re: [net-next 00/15][pull request] Intel Wired LAN Driver Updates

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Mon,  6 Jan 2014 04:30:21 -0800

> This series contains updates to i40e only.
 ...
>   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Pulled, please make sure the coding style feedback does actually
get addressed.

Thanks Jeff.

Re: [net-next 00/15][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

[-- Attachment #1: Type: text/plain, Size: 459 bytes --]

On Mon, 2014-01-06 at 13:26 -0500, David Miller wrote:
> From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
> Date: Mon,  6 Jan 2014 04:30:21 -0800
> 
> > This series contains updates to i40e only.
>  ...
> >   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master
> 
> Pulled, please make sure the coding style feedback does actually
> get addressed.
> 
> Thanks Jeff.

Yes, I will make sure it is in one of the upcoming series.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [net-next 00/15][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

[-- Attachment #1: Type: text/plain, Size: 500 bytes --]

On Mon, 2014-01-06 at 13:26 -0500, David Miller wrote:
> From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
> Date: Mon,  6 Jan 2014 04:30:21 -0800
> 
> > This series contains updates to i40e only.
>  ...
> >   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master
> 
> Pulled, please make sure the coding style feedback does actually
> get addressed.
> 
> Thanks Jeff.

Just to be clear, this coding style will be fixed in patch 13 of the
next series I am sending out.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

[net-next 00/15][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series contains updates to i40e only.

Anjali adds more functionality to debugfs to assist development and
testing of admin queue commands.

Greg makes sure broadcast promiscuous is disabled by default, otherwise
VLAN tagged packets out of the assigned VLAN domain are received.  Also
provides a fix when the 8021q driver is loaded, so that VLAN 0 tagged
packets are accepted so that upper layers can interpret the priority
bits. Then provides a fix to let the VF to request the PF to set its
already assigned MAC address without generating an error.  Greg also
adds helper functions to enable or disable internal switch loopback
when VFs are created or destroyed via the sysfs interface.

Shannon provides most of the changes, where he adds code to ensure
that the hardware waits to make sure that the firmware is ready as well
after reset.  Also updates the code to use the new features in the
firmware.  Provides a fix while in MFP mode where resources are
reduced, so use a smaller range of test registers than when in SFP mode.
Moves the PF ID initialization code to earlier in the driver
initialization function since a few operations need the information
before the first PF reset is called.  Shannon adds a check for MAC
type before reading anything from the registers to ensure we dealing
with the correct MAC type.  Then reworks Shadow RAM read word/buffer
functions as to not block whole NVM resources for SR read operations.

Mitch lastly provides a fix to correctly setup ARQ descriptors in
the cleanup code.

Catherine bumps the driver version due to all the recent changes.

The following are changes since commit 83111e7fe85f2dc8b61e463c71b971f4998d8e53:
  netfilter: Fix build failure in nfnetlink_queue_core.c.
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Anjali Singhai Jain (1):
  i40e: Expose AQ debugfs hooks

Catherine Sullivan (1):
  i40e: Bump version

Greg Rose (4):
  i40e: Do not enable broadcast promiscuous by default
  i40e: Stop accepting any VLAN tag on VLAN 0 filter set
  i40e: Allow VF to set already assigned MAC address
  i40e: Enable/Disable PF switch LB on SR-IOV configure changes

Kamil Krawczyk (1):
  i40e: remove redundant AQ enable

Mitch Williams (1):
  i40e: correctly setup ARQ descriptors

Shannon Nelson (7):
  i40e: Add code to wait for FW to complete in reset path
  i40e: update firmware api to 1.1
  i40e: Reduce range of interrupt reg in reg test
  i40e: move PF ID init from PF reset to SC init
  i40e: check MAC type before any REG access
  i40e: rework shadow ram read functions
  i40e: whitespace paren and comment tweaks

 drivers/net/ethernet/intel/i40e/i40e_adminq.c      |  27 ++---
 drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h  | 126 +++++++++++++++------
 drivers/net/ethernet/intel/i40e/i40e_common.c      |  51 ++++++---
 drivers/net/ethernet/intel/i40e/i40e_debugfs.c     | 112 ++++++++++++++++++
 drivers/net/ethernet/intel/i40e/i40e_diag.c        |   6 +-
 drivers/net/ethernet/intel/i40e/i40e_main.c        |  29 ++---
 drivers/net/ethernet/intel/i40e/i40e_nvm.c         |  67 +++--------
 drivers/net/ethernet/intel/i40e/i40e_register.h    |  22 ++++
 drivers/net/ethernet/intel/i40e/i40e_type.h        |  11 +-
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 100 +++++++++++++---
 10 files changed, 395 insertions(+), 156 deletions(-)

-- 
1.8.3.1

Re: [net-next 08/15] i40e: acknowledge VFLR when disabling SR-IOV

[Sergei Shtylyov]

Hello.

On 06-01-2014 22:10, Williams, Mitch A wrote:

>>> From: Mitch Williams <mitch.a.williams@intel.com>

>>> When SR-IOV is disabled, the (now nonexistent) virtual function
>>> devices undergo a VFLR event. We don't need to handle this event
>>> because the VFs are gone, but we do need to tell the HW that they are
>>> complete. This fixes an issue with a phantom VFLR and broken VFs when
>>> SR-IOV is re-enabled.

>>> Change-Id: I7580b49ded0158172a85b14661ec212af77000c8
>>> Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
>>> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
>>> Tested-by: Sibai Li <sibai.li@intel.com>
>>> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
>>> ---
>>>    drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 15 +++++++++++++--
>>>    1 file changed, 13 insertions(+), 2 deletions(-)

>>> diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
>> b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
>>> index f92404c..e91f9d7 100644
>>> --- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
>>> +++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
>> [...]
>>> @@ -748,8 +750,17 @@ void i40e_free_vfs(struct i40e_pf *pf)
>>>    	kfree(pf->vf);
>>>    	pf->vf = NULL;
>>>
>>> -	if (!i40e_vfs_are_assigned(pf))
>>> +	if (!i40e_vfs_are_assigned(pf)) {
>>>    		pci_disable_sriov(pf->pdev);
>>> +		/* Acknowledge VFLR for all VFS. Without this, VFs will fail to
>>> +		 * work correctly when SR-IOV gets re-enabled.
>>> +		 */
>>> +		for (vf_id = 0; vf_id < tmp; vf_id++) {
>>> +			reg_idx = (hw->func_caps.vf_base_id + vf_id) / 32;
>>> +			bit_idx = (hw->func_caps.vf_base_id + vf_id) % 32;
>>> +			wr32(hw, I40E_GLGEN_VFLRSTAT(reg_idx), (1 << bit_idx));
>>> +		}
>>> +	}
>>>    	else

>>      } and *else* should be on the same line. And the *else* arm should also
>> have {} now.

>>>    		dev_warn(&pf->pdev->dev,
>>>    			 "unable to disable SR-IOV because VFs are assigned.\n");

>> WBR, Sergei

> You are absolutely correct, Sergei, and I apologize for not seeing this before I submitted the patch.

    I guess you haven't run scripts/checkpatch.pl, have you?

> There will be a patch coming from Greg Rose in the next few weeks that will fix this problem in the process of adding a bug fix. Since this is just cosmetic, would it be all right with you if we just wait for Greg's patch to come through?

    Looks like DaveM has decided for everybody and the patch with the fix has 
been already posted too.

> -Mitch

WBR, Sergei

[net-next 00/15][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series contains updates to i40e only.

Anjali provides a fix where interrupts were not being re-enabled on ICR0
even though they were auto masked by hardware.  Then provides a fix to
cleanup RSS initialization because it was doing some extra work, so
remove the extra work and any bugs it created when managing number of
queues.  Since hardware requires a full packet template to be pointed to
when adding hardware flow filters, add the template and use it for
programming filters.

Jesse provides a fix to replace the use of driver specific defines with
kernel ETH_ALEN defines.  Then disables packet split because with the
use of GRO, we do not need the extra bus overhead.  Fixes spelling
error in code comment.

Kamil provides a fix for the driver where the hardware expects the MAC
address in a very specific format and the driver was filing the data
incorrectly.

Mitch provides a fix to resolve a panic on reset by adding checks to
VSI->rx_rings.  Then shortens alloc_rx_buff_failed and
alloc_rx_page_failed variables since both part of an RX specific
structure so just remove the _rx part of the name.  Then fixes
badly formatted lines, long lines and mis-formatted lines.

Shannon provides a fix to call AQ to release any reservation held by this
PF on the NVM resource lock on startup, in order to clear anything that
might have been left over from a previous run.  Then removes interrupt on
AQ error since nearly everything we do is synchronous, using the
interrupt-on-error bit is unnecessary and causing unneeded interrupts.
Adds code to handle the ability to send messages among the physical
function interfaces by the admin queue.

Catherine sets the MFP flag earlier in software init and uses that flag
to decide if other hardware work-arounds are required which turns
off flow director in MFP mode.

The following are changes since commit 54b553e2c16001d13e0186cad2531764065f9a1b:
  Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Anjali Singhai Jain (2):
  i40e: Re-enable interrupt on ICR0
  i40e: Cleanup reconfig rss path

Catherine Sullivan (1):
  i40e: Turn flow director off in MFP mode

Greg Rose (2):
  i40e: Fix GPL header
  i40e: add a comment on barrier and fix panic on reset

Jesse Brandeburg (4):
  i40e: use kernel specific defines
  i40e: disable packet split
  i40e: fix spelling errors
  i40e: Add a dummy packet template

Kamil Krawczyk (1):
  i40e: Fix MAC format in Write MAC address AQ cmd

Mitch Williams (2):
  i40e: shorten wordy fields
  i40e: trivial: formatting and checkpatch fixes

Shannon Nelson (3):
  i40e: release NVM resource reservation on startup
  i40e: remove interrupt on AQ error
  i40e: accept pf to pf adminq messages

 drivers/net/ethernet/intel/i40e/Makefile           |  7 +--
 drivers/net/ethernet/intel/i40e/i40e.h             |  7 +--
 drivers/net/ethernet/intel/i40e/i40e_adminq.c      | 12 ++--
 drivers/net/ethernet/intel/i40e/i40e_adminq.h      |  7 +--
 drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h  |  7 +--
 drivers/net/ethernet/intel/i40e/i40e_alloc.h       |  7 +--
 drivers/net/ethernet/intel/i40e/i40e_common.c      | 14 +++--
 drivers/net/ethernet/intel/i40e/i40e_debugfs.c     | 13 ++---
 drivers/net/ethernet/intel/i40e/i40e_diag.c        |  7 +--
 drivers/net/ethernet/intel/i40e/i40e_diag.h        |  7 +--
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c     | 33 ++++++++---
 drivers/net/ethernet/intel/i40e/i40e_hmc.c         |  7 +--
 drivers/net/ethernet/intel/i40e/i40e_hmc.h         |  7 +--
 drivers/net/ethernet/intel/i40e/i40e_lan_hmc.c     |  7 +--
 drivers/net/ethernet/intel/i40e/i40e_lan_hmc.h     |  7 +--
 drivers/net/ethernet/intel/i40e/i40e_main.c        | 68 +++++++++++-----------
 drivers/net/ethernet/intel/i40e/i40e_nvm.c         |  7 +--
 drivers/net/ethernet/intel/i40e/i40e_osdep.h       |  7 +--
 drivers/net/ethernet/intel/i40e/i40e_prototype.h   |  7 +--
 drivers/net/ethernet/intel/i40e/i40e_register.h    |  7 +--
 drivers/net/ethernet/intel/i40e/i40e_status.h      |  7 +--
 drivers/net/ethernet/intel/i40e/i40e_txrx.c        | 44 +++++++-------
 drivers/net/ethernet/intel/i40e/i40e_txrx.h        | 11 ++--
 drivers/net/ethernet/intel/i40e/i40e_type.h        | 15 ++---
 drivers/net/ethernet/intel/i40e/i40e_virtchnl.h    | 11 ++--
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 10 ++--
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h |  7 +--
 27 files changed, 176 insertions(+), 174 deletions(-)

-- 
1.8.3.1

Re: [net-next 00/15][pull request] Intel Wired LAN Driver Updates

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Thu,  9 Jan 2014 04:52:09 -0800

> This series contains updates to i40e only.
 ...
>   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Pulled, thanks Jeff.

[net-next 00/15][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series contains updates to e1000e, ixgbevf and igb.

Majority of this series contains fixes and cleanups to e1000e,
most notably are:

Todd provides a fix to PTP in e1000e which adds a lock in e1000e_phc_adjfreq
to prevent concurrent changes to TIMINCA and SYSTIMH/L.  Then provides an
igb fix to use ARRAY_SIZE for array size calculation.

David provides the remaining e1000e which contain:
 - cleanup of pointer references that are no longer used
 - fix an issue on systems with Management Engine enabled with the
   ethernet cable unplugged
 - fix an issue on 82579 where enabling EEE LPI sooner than one second
   after link up causes link issues on some switches
 - refactor the power management flows to prevent the suspend path from
   being executed twice when hibernating
 - refactor the runtime power management to fix interfering with the
   functionality of Energy Efficient Ethernet when enabled and to fix
   the device from repeatedly flip between suspend and resume with the
   interface administratively downed
 - enable the feature PHY Ultra Low Power Mode which is a power saving
   feature that reduces the power consumption of the PHY when a cable is
   not connected
 - fix the ethtool offline tests for 82579 parts
 - fix SHRA register access for 82579 parts which was introduced by
   previous commit c3a0dce35af0 "e1000e: fix overrun of PHY RAR array"

Florian provides a fix for ixgbevf where skb->pkt_type was being checked
like a bitmask, but it is not a bitmask.

Fix an issue reported by Stephen Hemminger where there was a warning
about code defined but never used if IGB_HWMON is not defined.

The following are changes since commit 37147652cfaa20a87ead9bb04aec1834b40c5c97:
  6lowpan: reassembly: fix return of init function
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

David Ertman (11):
  e1000e: Cleanup unecessary references
  e1000e: Resolve issues with Management Engine (ME) briefly blocking
    PHY resets
  e1000e: Fix 82579 sets LPI too early.
  e1000e: Cleanup - Update GPL header and Copyright
  e1000e: Add missing branding strings in ich8lan.c
  e1000e: Refactor PM flows
  e1000e Refactor of Runtime Power Management
  e1000e: Feature Enable PHY Ultra Low Power Mode (ULP)
  e1000e: Fix not generating an error on invalid load parameter
  e1000e: Fix ethtool offline tests for 82579 parts
  e1000e: Fix SHRA register access for 82579

Florian Fainelli (1):
  ixgbevf: fix skb->pkt_type checks

Jeff Kirsher (1):
  igb: fix warning if !CONFIG_IGB_HWMON

Todd Fujinaka (2):
  e1000e: PTP lock in e1000e_phc_adjustfreq
  igb: fix array size calculation

 drivers/net/ethernet/intel/e1000e/80003es2lan.c   |  47 +--
 drivers/net/ethernet/intel/e1000e/80003es2lan.h   |  47 +--
 drivers/net/ethernet/intel/e1000e/82571.c         |  47 +--
 drivers/net/ethernet/intel/e1000e/82571.h         |  47 +--
 drivers/net/ethernet/intel/e1000e/Makefile        |   7 +-
 drivers/net/ethernet/intel/e1000e/defines.h       |  55 ++-
 drivers/net/ethernet/intel/e1000e/e1000.h         |  50 ++-
 drivers/net/ethernet/intel/e1000e/ethtool.c       |  63 ++--
 drivers/net/ethernet/intel/e1000e/hw.h            |  55 +--
 drivers/net/ethernet/intel/e1000e/ich8lan.c       | 427 ++++++++++++++++++----
 drivers/net/ethernet/intel/e1000e/ich8lan.h       |  72 ++--
 drivers/net/ethernet/intel/e1000e/mac.c           |  47 +--
 drivers/net/ethernet/intel/e1000e/mac.h           |  47 +--
 drivers/net/ethernet/intel/e1000e/manage.c        |  47 +--
 drivers/net/ethernet/intel/e1000e/manage.h        |  47 +--
 drivers/net/ethernet/intel/e1000e/netdev.c        | 286 +++++++++------
 drivers/net/ethernet/intel/e1000e/nvm.c           |  47 +--
 drivers/net/ethernet/intel/e1000e/nvm.h           |  47 +--
 drivers/net/ethernet/intel/e1000e/param.c         |  53 ++-
 drivers/net/ethernet/intel/e1000e/phy.c           |  47 +--
 drivers/net/ethernet/intel/e1000e/phy.h           |  47 +--
 drivers/net/ethernet/intel/e1000e/ptp.c           |  52 ++-
 drivers/net/ethernet/intel/e1000e/regs.h          |  48 ++-
 drivers/net/ethernet/intel/igb/e1000_82575.c      |   6 +-
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c |   3 +-
 25 files changed, 1003 insertions(+), 738 deletions(-)

-- 
1.8.3.1

Re: [net-next 00/15][pull request] Intel Wired LAN Driver Updates

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Sat,  8 Mar 2014 01:25:26 -0800

> This series contains updates to e1000e, ixgbevf and igb.
 ...
>   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Pulled, thanks a lot Jeff, and again welcome back.

Re: [net-next 00/15][pull request] Intel Wired LAN Driver Updates

[David Miller]

From: David Miller <davem@davemloft.net>
Date: Sat, 08 Mar 2014 18:50:08 -0500 (EST)

> From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
> Date: Sat,  8 Mar 2014 01:25:26 -0800
> 
>> This series contains updates to e1000e, ixgbevf and igb.
>  ...
>>   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master
> 
> Pulled, thanks a lot Jeff, and again welcome back.

Jeff, please get this new warning fixed, thanks:

drivers/net/ethernet/intel/i40e/i40e_ethtool.c: In function ‘i40e_del_fdir_entry’:
drivers/net/ethernet/intel/i40e/i40e_ethtool.c:1441:18: warning: unused variable ‘pf’ [-Wunused-variable]
  struct i40e_pf *pf = vsi->back;
                  ^

Re: [net-next 00/15][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

[-- Attachment #1: Type: text/plain, Size: 913 bytes --]

On Sat, 2014-03-08 at 19:10 -0500, David Miller wrote:
> From: David Miller <davem@davemloft.net>
> Date: Sat, 08 Mar 2014 18:50:08 -0500 (EST)
> 
> > From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
> > Date: Sat,  8 Mar 2014 01:25:26 -0800
> > 
> >> This series contains updates to e1000e, ixgbevf and igb.
> >  ...
> >>   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next
> master
> > 
> > Pulled, thanks a lot Jeff, and again welcome back.
> 
> Jeff, please get this new warning fixed, thanks:
> 
> drivers/net/ethernet/intel/i40e/i40e_ethtool.c: In function
> ‘i40e_del_fdir_entry’:
> drivers/net/ethernet/intel/i40e/i40e_ethtool.c:1441:18: warning:
> unused variable ‘pf’ [-Wunused-variable]
>   struct i40e_pf *pf = vsi->back;

Yeah, I noticed that as well.  I have a patch in my queue already to
resolve that, should be in my next pull request.  Thanks Dave!

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

[net-next 00/15][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series contains updates to e100, igb, igbvf, ixgbe and ixgbevf.

Stefan adds a igb patch to enable the ability strip VLAN header information
for packets bound for a VM on i350 hardware.

Joe Perches provides patches for e100, igb, igbvf, ixgbe and ixgbevf to
convert the use of __constant_<foo> to just <foo> to align with the rest
of the kernel.

Don provides two fixes for ixgbe, first resolves a link issue with DA
cables where we were not always freeing the firmware/software semaphore
after grabbing it.  Second stops caching whether the management firmware
was enabled, however since this is not static, we really need to verify
with each check.

Jacob provides six fixes/cleanups for ixgbe, most notably, correct
the stop_mac_link_on d3() to check the Core Clock Disable bit before
stopping link and to fully check to see if manage firmware is running or
could be enabled before bringing down the link.  Fix flow control
auto-negation for KR/KX/K4 interfaces, since setting up MAC link, the
cached autoc value and current autoc value were being incorrectly used to
determine whether link reset is required.

Emil provides a fix for ixgbe where there was a chance for aggressive
start_ndo_zmit() callers to sneak packets between enabling the Tx queues
and the link coming up.  To resolve this, move the call to enable Tx
queues to after the link is established.

The following are changes since commit a9baf10aafe7001501189099df4b91f90739e182:
  qeth: Fix IP version detection for VLAN traffic
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Don Skidmore (2):
  ixgbe: fix errors related to protected AUTOC calls
  ixgbe: Stop cacheing if the MNG FW enabled

Emil Tantilov (1):
  ixgbe: enable tx queues after link up

Jacob Keller (6):
  ixgbe: check Core Clock Disable bit
  ixgbe: fix ixgbe_stop_mac_link_on_d3_82599 to check mng correctly
  ixgbe: fix ixgbe_setup_mac_link_82599 autoc variables
  ixgbe: remove unused media type
  ixgbe: use ixgbe_read_pci_cfg_word
  ixgbe: clean up ixgbe_atr_compute_perfect_hash_82599

Joe Perches (5):
  e100: Convert uses of __constant_<foo> to <foo>
  igb: Convert uses of __constant_<foo> to <foo>
  igbvf: Convert uses of __constant_<foo> to <foo>
  ixgbe: Convert uses of __constant_<foo> to <foo>
  ixgbevf: Convert uses of __constant_<foo> to <foo>

Stefan Assmann (1):
  igb: enable VLAN stripping for VMs with i350

 drivers/net/ethernet/intel/e100.c                 |   4 +-
 drivers/net/ethernet/intel/igb/e1000_82575.h      |   4 +
 drivers/net/ethernet/intel/igb/e1000_regs.h       |   1 +
 drivers/net/ethernet/intel/igb/igb_main.c         |  19 ++-
 drivers/net/ethernet/intel/igbvf/netdev.c         |   4 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c    |   1 -
 drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c    | 170 +++++-----------------
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.c   |  24 +--
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.h   |   1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c     |   8 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c     |  68 +++++----
 drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h      |   4 -
 drivers/net/ethernet/intel/ixgbe/ixgbe_type.h     |   6 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c     |   1 -
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c |   4 +-
 15 files changed, 113 insertions(+), 206 deletions(-)

-- 
1.8.3.1

Re: [net-next 00/15][pull request] Intel Wired LAN Driver Updates

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Thu, 20 Mar 2014 01:32:50 -0700

> This series contains updates to e100, igb, igbvf, ixgbe and ixgbevf.
 ...
>   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Pulled, thanks Jeff.

[net-next 00/15][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series contains updates to e1000e, igb, i40e and i40evf

Anjali provides i40e fix to remove the ATR filter on RST as well as FIN
packets.  Cleans up add_del_fdir() because it was used and implemented
only for the add, so change the name and drop a parameter.  Adds the
ability to drop a flow if we wanted to and adds a flow director
message level to be used for flow director specific messages.  Provide
a fallback debug flow for i40e if the reset fails or the firmware is
unresponsive.

Mitch fixes an issue on i40evf where the Tx watchdog handler was causing
an oops when sending an admin queue message to request a reset because
the admin queue functions use spinlocks.

Greg provides a change to i40e to make the alloc and free queue vector
calls orthogonal.

Shannon fixes i40e to verify the eeprom checksum and firmware CRC status
bits, and shutdown the driver if they fail.  This change stops the
processing of traffic, but does not kill the PF netdev so that the
NVMUpdate process still has a chance at fixing the image.  Also provides
a fix to make sure the VSI has a netdev before trying to use it in
the debugfs netdev_ops commands.

Jakub Kicinski provides patches for e1000e and igb to fix a number issues
found in the PTP code.

The following are changes since commit e74dbb73271c5c3e822af3aa66c9a28bf7dbfbfd:
  Merge branch 'bnx2x-next'
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Anjali Singhai Jain (6):
  i40e: Delete ATR filter on RST
  i40e: Cleanup in FDIR SB ethtool code
  i40e: Add functionality for FD SB to drop packets
  i40e/i40evf: Add an FD message level
  i40e: Use DEBUG_FD message level for an FD message
  i40e: Add a fallback debug flow for the driver

Greg Rose (1):
  i40e: Make the alloc and free queue vector calls orthogonal

Jakub Kicinski (4):
  e1000e: add timeout for TX HW time stamping work
  e1000e: remove redundant if clause from PTP work
  igb: never generate both software and hardware timestamps
  igb: fix race conditions on queuing skb for HW time stamp

Jesse Brandeburg (1):
  i40evf: remove double space after return

Mitch Williams (1):
  i40evf: fix oops in watchdog handler

Shannon Nelson (2):
  i40e: eeprom integrity check on load and empr
  i40e: check for netdev before debugfs use

 drivers/net/ethernet/intel/e1000e/e1000.h          |   2 +
 drivers/net/ethernet/intel/e1000e/ethtool.c        |   1 +
 drivers/net/ethernet/intel/e1000e/netdev.c         |  10 +-
 drivers/net/ethernet/intel/i40e/i40e.h             |   2 +
 drivers/net/ethernet/intel/i40e/i40e_debugfs.c     | 120 ++++++++++++---------
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c     |  39 ++++---
 drivers/net/ethernet/intel/i40e/i40e_main.c        |  72 ++++++++++---
 drivers/net/ethernet/intel/i40e/i40e_txrx.c        |  14 ++-
 drivers/net/ethernet/intel/i40e/i40e_type.h        |   1 +
 drivers/net/ethernet/intel/i40evf/i40e_prototype.h |   2 +-
 drivers/net/ethernet/intel/i40evf/i40e_type.h      |   1 +
 drivers/net/ethernet/intel/i40evf/i40evf.h         |   1 +
 drivers/net/ethernet/intel/i40evf/i40evf_main.c    |  10 +-
 drivers/net/ethernet/intel/igb/igb.h               |   3 +-
 drivers/net/ethernet/intel/igb/igb_main.c          |   7 +-
 drivers/net/ethernet/intel/igb/igb_ptp.c           |   3 +
 16 files changed, 186 insertions(+), 102 deletions(-)

-- 
1.8.3.1

[net-next 00/15][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series contains updates to i40e and i40evf.

Jacob provides a i40e patch to remove ptp_tx_work() because it conflicts
with the interrupt-based handler and will cause spurious warning messages
to be displayed in the kernel log.  Since the hardware can properly trigger
an interrupt, we do not need to poll for an available timestamp in a work
queue any more.

Greg provides two patches for i40e, first to retain the MAC filter list
when changing a port VLAN.  Second fixes an issue where the function to
set the VF MAC address was not taking the port VLAN filter into account
when setting/clearing/resetting the VF's host administered MAC address.

Mitch provides three patches for i40evf, first adds support for getting
and setting RSS hashing options, RSS LUT entries, and getting the number
of device channels from ethtool.  Fixes a panic that woudl occur in the VF
if the PF driver failed or was removed from the host kernel.

Shannon adds driver version string to the driver version command so that
can be passed down through the firmware to low-level NC-SI functions.

Neerav provides several patches, first redistributes queue vectors after
DCB reconfiguration because the total number of queues that are configured
for a VSI may change based on a change in the total number of TCs enabled
as a result of a change in the DCB configuration based on DCBX.  Second,
allows the driver probe to continue when querying DCB config fails.
Lastly, provides changes to retrieve and store missing link config
information that was not being cached in the struct i40e_link_status.

Kevin provides a couple of patches, first to change a int variable type
to u16 to avoid a typecheck failure.  Second to update a function
parameters to remove an argument which is no longer used.

The following are changes since commit a49eb42a341f1df8fa0f9dc4449f9dd4a3234a2f:
  sched, act: allow to clear all actions as well
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Anjali Singhai Jain (2):
  i40e: Do not enable NTUPLE feature control in MFP mode
  i40e: Do not expose fd-sb commands from debugfs

Catherine Sullivan (1):
  i40e/i40evf: Bump build version

Greg Rose (2):
  i40e: Retain MAC filters when changing port VLAN
  i40e: Use port VLAN in MAC/VLAN filter configuration

Jacob Keller (1):
  i40e: remove ptp_tx_work timestamp work item

Kevin Scott (2):
  i40e: Change variable type to avoid typecheck failure
  i40e: Update function formal parameters

Mitch A Williams (1):
  i40evf: support ethtool RSS options

Mitch Williams (2):
  i40evf: fix panic on PF driver fail
  i40evf: remove debugging message

Neerav Parikh (3):
  i40e: Redistribute queue vectors after DCB reconfiguration
  i40e: Don't stop driver probe when querying DCB config fails
  i40e/i40evf: Retrieve and store missing link config information

Shannon Nelson (1):
  i40e/i40evf: add driver version string to driver version command

 drivers/net/ethernet/intel/i40e/i40e.h             |   2 -
 drivers/net/ethernet/intel/i40e/i40e_common.c      |  21 +-
 drivers/net/ethernet/intel/i40e/i40e_debugfs.c     |   6 -
 drivers/net/ethernet/intel/i40e/i40e_main.c        |  19 +-
 drivers/net/ethernet/intel/i40e/i40e_prototype.h   |   4 +-
 drivers/net/ethernet/intel/i40e/i40e_ptp.c         |  36 ---
 drivers/net/ethernet/intel/i40e/i40e_txrx.c        |   3 -
 drivers/net/ethernet/intel/i40e/i40e_type.h        |   4 +
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c |  11 +-
 drivers/net/ethernet/intel/i40evf/i40e_type.h      |   4 +
 drivers/net/ethernet/intel/i40evf/i40evf_ethtool.c | 316 +++++++++++++++++++++
 drivers/net/ethernet/intel/i40evf/i40evf_main.c    |  15 +-
 12 files changed, 373 insertions(+), 68 deletions(-)

-- 
1.9.0

Re: [net-next 00/15][pull request] Intel Wired LAN Driver Updates

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Mon, 28 Apr 2014 06:52:23 -0700

> This series contains updates to i40e and i40evf.

Pulled, thanks a lot Jeff.

[net-next 00/15][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series contains updates to i40e and i40evf.

Shannon makes minor changes to the AdminQ interface to bring it up to
date.  Removes the hard coding of stats struct size in ethtool, in prep
for adding data fields which are configuration dependent.

Catherine removes some unused and unneeded PCI bus defines.

Jesse fixes the copyright headers and finishes up the removal of the PTP
Tx work functionality which allows us to rely on the Tx timesync interrupt.

Mitch provides a number of fixes and cleanups for i40e/i40evf based on
suggestions from Ben Hutchings.  First is to use a macro parameter for
ethtool stats instead of just assuming that a valid netdev variable
exists.  Second is not to tell ethtool that the VF can do 10GbaseT, when
it really has no idea what its link speed is, so set the supported value
to 0 instead.  Make the ethtool_ops structure constant since it is
extremely unlikely to change at runtime.  Ethtool consistently reports
0 values for our ITR settings because we never actually use them, so
fix this by setting the default values to the specified default values.

Greg avoids a compile error by wrapping the call to i40e_alloc_vfs() in
CONFIG_PCI_IOV because the function itself is wrapped in the same
conditional compile block.

Alexander Gordeev updates the driver to use the new pci_enable_msi_range()
and pci_enable_msix_range() or pci_enable_msi_exact() and
pci_enable_msix_exact().

Jean Sacren provides a fix where the wrong error code was being passed to
i40e_open().

The following are changes since commit b6052af61a9e0dee236bcf4c69843126c0d28e4f:
  Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-merge
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Alexander Gordeev (1):
  i40evf: Use pci_enable_msix_range() instead of pci_enable_msix()

Catherine Sullivan (1):
  i40evf: Remove unused defines

Greg Rose (1):
  i40e: Check PCI_IOV config to avoid compile error

Jean Sacren (1):
  i40e: fix passing wrong error code to i40e_open()

Jesse Brandeburg (2):
  i40evf: Fix the headers and update copyright year.
  i40e: remove Tx work for ptp

Mitch Williams (7):
  i40e: add required include
  i40evf: Use macro param for ethtool stats
  i40evf: don't lie to ethtool
  i40evf: make ethtool_ops const
  i40e/i40evf: set proper default for ITR registers
  i40e/i40evf: control auto ITR through ethtool
  i40e: Don't disable SR-IOV when VFs are assigned

Shannon Nelson (2):
  i40evf: Update AdminQ interface
  i40e: remove hardcode of stats struct size in ethtool

 drivers/net/ethernet/intel/i40e/i40e.h             |  4 --
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c     | 63 +++++++---------
 drivers/net/ethernet/intel/i40e/i40e_main.c        |  8 ++-
 drivers/net/ethernet/intel/i40e/i40e_ptp.c         |  1 -
 drivers/net/ethernet/intel/i40e/i40e_txrx.c        |  1 +
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 11 ++-
 drivers/net/ethernet/intel/i40evf/Makefile         |  5 +-
 drivers/net/ethernet/intel/i40evf/i40e_adminq.c    |  5 +-
 drivers/net/ethernet/intel/i40evf/i40e_adminq.h    |  5 +-
 .../net/ethernet/intel/i40evf/i40e_adminq_cmd.h    | 27 ++++---
 drivers/net/ethernet/intel/i40evf/i40e_alloc.h     |  5 +-
 drivers/net/ethernet/intel/i40evf/i40e_common.c    |  5 +-
 drivers/net/ethernet/intel/i40evf/i40e_hmc.h       |  5 +-
 drivers/net/ethernet/intel/i40evf/i40e_lan_hmc.h   |  5 +-
 drivers/net/ethernet/intel/i40evf/i40e_osdep.h     |  5 +-
 drivers/net/ethernet/intel/i40evf/i40e_prototype.h |  5 +-
 drivers/net/ethernet/intel/i40evf/i40e_register.h  |  5 +-
 drivers/net/ethernet/intel/i40evf/i40e_status.h    |  5 +-
 drivers/net/ethernet/intel/i40evf/i40e_txrx.c      |  3 +
 drivers/net/ethernet/intel/i40evf/i40e_txrx.h      |  5 +-
 drivers/net/ethernet/intel/i40evf/i40e_type.h      | 12 +---
 drivers/net/ethernet/intel/i40evf/i40e_virtchnl.h  |  5 +-
 drivers/net/ethernet/intel/i40evf/i40evf.h         |  3 +
 drivers/net/ethernet/intel/i40evf/i40evf_ethtool.c | 84 +++++++++++-----------
 drivers/net/ethernet/intel/i40evf/i40evf_main.c    | 40 +++++------
 .../net/ethernet/intel/i40evf/i40evf_virtchnl.c    |  3 +
 26 files changed, 179 insertions(+), 146 deletions(-)

-- 
1.9.0

Re: [net-next 00/15][pull request] Intel Wired LAN Driver Updates

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Wed, 21 May 2014 05:00:58 -0700

> This series contains updates to i40e and i40evf.

Pulled, thanks Jeff.

[net-next 00/15][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series contains updates to e1000, e1000e, ixgbe and i40evf.

Emil provides a fix for ixgbe so that non-fiber devices with MNG FW enabled
are able to link at 100Mbps.

Jacob provides several changes for ixgbe, most of which are PTP related.
Renames ixgbe_ptp_enable() to ixgbe_ptp_feature_enable() to better reflect
the functions purpose.  Extracts the hardware setup logic for the PTP
hardware bits from the ixgbe_ptp_set_ts_config() to enable future work for
the ixgbe_ptp_reset().  Maintain the hwstamp configuration through a reset
and extracts the creation of the PTP clock device from ptp_init() in order
to properly handle a suspend/resume cycle and only calls it if we don't
already have a ptp_clock pointer.

David provides a patch to expend the e1000e driver to turn on unicast
PROMISC when there is failure to write to a shared receive address register.
The fix update_phy_task() for 82579 is expanded to include newer PHYs as well
so that the dev_spec->eee_lp_ability has the correct value when going into
SX states.

Todd provides a e1000e fix an errata for 82574/82583 where it is possible
bad bits are read from SYSTIMH/L so check to see that the time is
incrementing at a reasonable rate and is a multiple of the time incremental
value.  Removes a redundant igb PHY power down register write.

Andi Kleen out of lines two write functions for e1000e to save 30k text size.

Tobias Klauser converts the e1000 and i40evf drivers to use the
is_broadcast_ether_addr() and is_multicast_ether_addr().

The following are changes since commit 3bea8eddfebe1c61ea824dd2880d4368791edc1f:
  Merge branch 'net-sysfs-docs'
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Andi Kleen (1):
  e1000e: Out of line __ew32_prepare/__ew32

David Ertman (3):
  e1000e: Failure to write SHRA turns on PROMISC mode
  e1000e: Cleanup parenthesis around return value
  e1000e: Fix expand setting EEE link info to all affected parts

Emil Tantilov (1):
  ixgbe: fix linking at 100Mbps on copper devices with MNG FW enabled

Jacob Keller (6):
  ixgbe: rename ixgbe_ptp_enable to ixgbe_ptp_feature_enable
  ixgbe: extract the hardware setup from the ixgbe_ptp_set_ts_config
  ixgbe: allow ixgbe_ptp_reset to maintain current hwtstamp config
  ixgbe: extract PTP clock device from ptp_init
  ixgbe: separate the PTP suspend and stop actions
  ixgbe: avoid duplicate code in suspend and stop paths

Tobias Klauser (2):
  e1000: Use is_broadcast_ether_addr/is_multicast_ether_addr helpers
  i40evf: Use is_multicast_ether_addr helper

Todd Fujinaka (2):
  e1000e: 82574/82583 TimeSync errata for SYSTIM read
  igb: remove redundant PHY power down register write

 drivers/net/ethernet/intel/e1000/e1000_hw.c     |   4 +-
 drivers/net/ethernet/intel/e1000e/80003es2lan.c |   1 +
 drivers/net/ethernet/intel/e1000e/82571.c       |   1 +
 drivers/net/ethernet/intel/e1000e/e1000.h       |  33 +----
 drivers/net/ethernet/intel/e1000e/hw.h          |   3 +-
 drivers/net/ethernet/intel/e1000e/ich8lan.c     |  61 +++++++--
 drivers/net/ethernet/intel/e1000e/mac.c         |   9 +-
 drivers/net/ethernet/intel/e1000e/mac.h         |   3 +-
 drivers/net/ethernet/intel/e1000e/netdev.c      |  69 +++++++++-
 drivers/net/ethernet/intel/i40evf/i40evf_main.c |   2 +-
 drivers/net/ethernet/intel/igb/e1000_phy.c      |  14 --
 drivers/net/ethernet/intel/igb/e1000_phy.h      |   1 -
 drivers/net/ethernet/intel/ixgbe/ixgbe.h        |   1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c   |  29 +++--
 drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c    | 163 ++++++++++++++++++------
 15 files changed, 277 insertions(+), 117 deletions(-)

-- 
1.9.3

Re: [net-next 00/15][pull request] Intel Wired LAN Driver Updates

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Tue, 27 May 2014 02:12:16 -0700

> This series contains updates to e1000, e1000e, ixgbe and i40evf.

Pulled, thanks a lot Jeff.

[net-next 00/15][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series contains updates to i40e and i40evf.

Kevin updates the i40e and i40evf driver i40e_check_asq_alive() to ensure
the length register offset is non-zero which indicates that the software
has initialized the admin queue.  Also removes PCTYPE definitions which are
now reserved.

Mitch enables descriptor prefetch for rings belonging to the virtual function.
Also configures the VF minimum transmit rate to 50 Mbps rather than 0 which was
be interpreted as no limit at all.  Mitch found in order for the VF to achieve
its programmed transmit rate, we need to set the max credit value to 4.
Lastly fixes a Tx hang and firmware crash that happens after setting the MTU
on a VF by not using the RESETTING state during reinit, this is because
the RESETTING state means that a catastrophic hardware bad thing is happening
and the driver needs to tiptoe around and not use the admin queue or registers.
A reinit is no big deal and we can use the admin queue (and we should) so
do not set the state to RESETTING during reinit to resolve the bug.

Akeem changes the declaration of the transmit and receive rings inside
several loops to eliminate declaring the same ring every time for the
duration of the loop and declares them just once before the loop.  Also fixes
the driver to clear the recovery pending bit if pf_reset fails instead of
falling through the setup process.

Anjali makes a change based on feedback from Ben Hutchings that cmd->data
needs to be reported in ETHTOOL_GRXCLSRLCNT and use a helper function to
calculate the total filter count.

Jesse removes storm control since the storm control features are not apart
of the hardware and were mistakenly left in the code.

Greg changes tx_lpi_status and rx_lpi_status from bool to u32 to avoid
sparse errors.

Shannon adds the clear_pxe AdminQ API call to tell the firmware that the
driver is taking over from PXE.  In addition, relaxes the firmware API
check to allow more flexibility in handling newer NICs and NVMs in the field.

Vasu ensures that FCoE is disabled for MFP modes since it is not supported
by overriding the hardware FCoE capability.

The following are changes since commit 6623b4194459c07859d3e3196c3994fa7be5b88e:
  Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Akeem G Abodunrin (2):
  i40e: Tx/Rx rings declaration
  i40e: Clear recovery pending, if reset failed

Anjali Singhai Jain (2):
  i40e: Report cmd->data in ETHTOOL_GRXCLSRLCNT instead of
    ETHTOOL_GRXCLSRULE
  i40e: Use the new i40e_get_fd_cnt_all function in other places

Greg Rose (1):
  i40e/i40evf: Change type to u32 to avoid sparse error

Jesse Brandeburg (1):
  i40e/i40evf: remove storm control

Kevin Scott (2):
  i40e/i40evf: Update check for AQ aliveness
  i40e/i40evf: Remove reserved PCTYPE defines

Mitch Williams (4):
  i40e: enable descriptor prefetch for VFs
  i40evf: don't round Tx rate down to 0
  i40evf: tweak Tx rate params and de-magic-ify
  i40evf: don't use RESETTING state during reinit

Shannon Nelson (2):
  i40e: add clear_pxe AdminQ request
  i40e: relax the firmware API version check

Vasu Dev (1):
  i40: disable FCoE for MFP modes

 drivers/net/ethernet/intel/i40e/i40e.h             |  9 +++++
 drivers/net/ethernet/intel/i40e/i40e_adminq.c      |  3 +-
 drivers/net/ethernet/intel/i40e/i40e_common.c      | 42 +++++++++++++++++++++-
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c     | 37 +++++++------------
 drivers/net/ethernet/intel/i40e/i40e_main.c        | 19 +++++-----
 drivers/net/ethernet/intel/i40e/i40e_prototype.h   |  2 ++
 drivers/net/ethernet/intel/i40e/i40e_register.h    |  4 ---
 drivers/net/ethernet/intel/i40e/i40e_txrx.c        | 33 +++++++----------
 drivers/net/ethernet/intel/i40e/i40e_txrx.h        |  7 +---
 drivers/net/ethernet/intel/i40e/i40e_type.h        | 14 +++-----
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 13 +++++--
 drivers/net/ethernet/intel/i40evf/i40e_common.c    |  6 +++-
 drivers/net/ethernet/intel/i40evf/i40e_register.h  |  4 ---
 drivers/net/ethernet/intel/i40evf/i40e_txrx.h      |  7 +---
 drivers/net/ethernet/intel/i40evf/i40e_type.h      | 14 +++-----
 drivers/net/ethernet/intel/i40evf/i40evf_main.c    |  2 --
 16 files changed, 116 insertions(+), 100 deletions(-)

-- 
1.9.3

Re: [net-next 00/15][pull request] Intel Wired LAN Driver Updates

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Thu, 29 May 2014 08:10:01 -0700

> This series contains updates to i40e and i40evf.
 ...
> The following are changes since commit 6623b4194459c07859d3e3196c3994fa7be5b88e:
>   Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next
> and are available in the git repository at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Pulled, thanks Jeff.

And, as always, thanks for the detailed cover letter.