netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Paul Durrant <paul.durrant@citrix.com>
To: <netdev@vger.kernel.org>, <xen-devel@lists.xen.org>
Cc: Paul Durrant <paul.durrant@citrix.com>,
	David Miller <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Veaceslav Falico <vfalico@redhat.com>,
	Alexander Duyck <alexander.h.duyck@intel.com>,
	"Nicolas Dichtel" <nicolas.dichtel@6wind.com>
Subject: [PATCH net-next v2 1/3] net: add skb_checksum_setup
Date: Thu, 9 Jan 2014 10:02:46 +0000	[thread overview]
Message-ID: <1389261768-30606-2-git-send-email-paul.durrant@citrix.com> (raw)
In-Reply-To: <1389261768-30606-1-git-send-email-paul.durrant@citrix.com>

This patch adds a function to set up the partial checksum offset for IP
packets (and optionally re-calculate the pseudo-header checksum) into the
core network code.
The implementation was previously private and duplicated between xen-netback
and xen-netfront, however it is not xen-specific and is potentially useful
to any network driver.

Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
---
 include/linux/skbuff.h |    2 +
 net/core/skbuff.c      |  273 ++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 275 insertions(+)

diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index d97f2d0..48b7605 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -2893,6 +2893,8 @@ static inline void skb_checksum_none_assert(const struct sk_buff *skb)
 
 bool skb_partial_csum_set(struct sk_buff *skb, u16 start, u16 off);
 
+int skb_checksum_setup(struct sk_buff *skb, bool recalculate);
+
 u32 __skb_get_poff(const struct sk_buff *skb);
 
 /**
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 1d641e7..15057d2 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -65,6 +65,7 @@
 #include <net/dst.h>
 #include <net/sock.h>
 #include <net/checksum.h>
+#include <net/ip6_checksum.h>
 #include <net/xfrm.h>
 
 #include <asm/uaccess.h>
@@ -3549,6 +3550,278 @@ bool skb_partial_csum_set(struct sk_buff *skb, u16 start, u16 off)
 }
 EXPORT_SYMBOL_GPL(skb_partial_csum_set);
 
+static int skb_maybe_pull_tail(struct sk_buff *skb, unsigned int len,
+			       unsigned int max)
+{
+	if (skb_headlen(skb) >= len)
+		return 0;
+
+	/* If we need to pullup then pullup to the max, so we
+	 * won't need to do it again.
+	 */
+	if (max > skb->len)
+		max = skb->len;
+
+	if (__pskb_pull_tail(skb, max - skb_headlen(skb)) == NULL)
+		return -ENOMEM;
+
+	if (skb_headlen(skb) < len)
+		return -EPROTO;
+
+	return 0;
+}
+
+/* This value should be large enough to cover a tagged ethernet header plus
+ * maximally sized IP and TCP or UDP headers.
+ */
+#define MAX_IP_HDR_LEN 128
+
+static int skb_checksum_setup_ip(struct sk_buff *skb, bool recalculate)
+{
+	unsigned int off;
+	bool fragment;
+	int err;
+
+	fragment = false;
+
+	err = skb_maybe_pull_tail(skb,
+				  sizeof(struct iphdr),
+				  MAX_IP_HDR_LEN);
+	if (err < 0)
+		goto out;
+
+	if (ip_hdr(skb)->frag_off & htons(IP_OFFSET | IP_MF))
+		fragment = true;
+
+	off = ip_hdrlen(skb);
+
+	err = -EPROTO;
+
+	if (fragment)
+		goto out;
+
+	switch (ip_hdr(skb)->protocol) {
+	case IPPROTO_TCP:
+		err = skb_maybe_pull_tail(skb,
+					  off + sizeof(struct tcphdr),
+					  MAX_IP_HDR_LEN);
+		if (err < 0)
+			goto out;
+
+		if (!skb_partial_csum_set(skb, off,
+					  offsetof(struct tcphdr, check))) {
+			err = -EPROTO;
+			goto out;
+		}
+
+		if (recalculate)
+			tcp_hdr(skb)->check =
+				~csum_tcpudp_magic(ip_hdr(skb)->saddr,
+						   ip_hdr(skb)->daddr,
+						   skb->len - off,
+						   IPPROTO_TCP, 0);
+		break;
+	case IPPROTO_UDP:
+		err = skb_maybe_pull_tail(skb,
+					  off + sizeof(struct udphdr),
+					  MAX_IP_HDR_LEN);
+		if (err < 0)
+			goto out;
+
+		if (!skb_partial_csum_set(skb, off,
+					  offsetof(struct udphdr, check))) {
+			err = -EPROTO;
+			goto out;
+		}
+
+		if (recalculate)
+			udp_hdr(skb)->check =
+				~csum_tcpudp_magic(ip_hdr(skb)->saddr,
+						   ip_hdr(skb)->daddr,
+						   skb->len - off,
+						   IPPROTO_UDP, 0);
+		break;
+	default:
+		goto out;
+	}
+
+	err = 0;
+
+out:
+	return err;
+}
+
+/* This value should be large enough to cover a tagged ethernet header plus
+ * an IPv6 header, all options, and a maximal TCP or UDP header.
+ */
+#define MAX_IPV6_HDR_LEN 256
+
+#define OPT_HDR(type, skb, off) \
+	(type *)(skb_network_header(skb) + (off))
+
+static int skb_checksum_setup_ipv6(struct sk_buff *skb, bool recalculate)
+{
+	int err;
+	u8 nexthdr;
+	unsigned int off;
+	unsigned int len;
+	bool fragment;
+	bool done;
+
+	fragment = false;
+	done = false;
+
+	off = sizeof(struct ipv6hdr);
+
+	err = skb_maybe_pull_tail(skb, off, MAX_IPV6_HDR_LEN);
+	if (err < 0)
+		goto out;
+
+	nexthdr = ipv6_hdr(skb)->nexthdr;
+
+	len = sizeof(struct ipv6hdr) + ntohs(ipv6_hdr(skb)->payload_len);
+	while (off <= len && !done) {
+		switch (nexthdr) {
+		case IPPROTO_DSTOPTS:
+		case IPPROTO_HOPOPTS:
+		case IPPROTO_ROUTING: {
+			struct ipv6_opt_hdr *hp;
+
+			err = skb_maybe_pull_tail(skb,
+						  off +
+						  sizeof(struct ipv6_opt_hdr),
+						  MAX_IPV6_HDR_LEN);
+			if (err < 0)
+				goto out;
+
+			hp = OPT_HDR(struct ipv6_opt_hdr, skb, off);
+			nexthdr = hp->nexthdr;
+			off += ipv6_optlen(hp);
+			break;
+		}
+		case IPPROTO_AH: {
+			struct ip_auth_hdr *hp;
+
+			err = skb_maybe_pull_tail(skb,
+						  off +
+						  sizeof(struct ip_auth_hdr),
+						  MAX_IPV6_HDR_LEN);
+			if (err < 0)
+				goto out;
+
+			hp = OPT_HDR(struct ip_auth_hdr, skb, off);
+			nexthdr = hp->nexthdr;
+			off += ipv6_authlen(hp);
+			break;
+		}
+		case IPPROTO_FRAGMENT: {
+			struct frag_hdr *hp;
+
+			err = skb_maybe_pull_tail(skb,
+						  off +
+						  sizeof(struct frag_hdr),
+						  MAX_IPV6_HDR_LEN);
+			if (err < 0)
+				goto out;
+
+			hp = OPT_HDR(struct frag_hdr, skb, off);
+
+			if (hp->frag_off & htons(IP6_OFFSET | IP6_MF))
+				fragment = true;
+
+			nexthdr = hp->nexthdr;
+			off += sizeof(struct frag_hdr);
+			break;
+		}
+		default:
+			done = true;
+			break;
+		}
+	}
+
+	err = -EPROTO;
+
+	if (!done || fragment)
+		goto out;
+
+	switch (nexthdr) {
+	case IPPROTO_TCP:
+		err = skb_maybe_pull_tail(skb,
+					  off + sizeof(struct tcphdr),
+					  MAX_IPV6_HDR_LEN);
+		if (err < 0)
+			goto out;
+
+		if (!skb_partial_csum_set(skb, off,
+					  offsetof(struct tcphdr, check))) {
+			err = -EPROTO;
+			goto out;
+		}
+
+		if (recalculate)
+			tcp_hdr(skb)->check =
+				~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
+						 &ipv6_hdr(skb)->daddr,
+						 skb->len - off,
+						 IPPROTO_TCP, 0);
+		break;
+	case IPPROTO_UDP:
+		err = skb_maybe_pull_tail(skb,
+					  off + sizeof(struct udphdr),
+					  MAX_IPV6_HDR_LEN);
+		if (err < 0)
+			goto out;
+
+		if (!skb_partial_csum_set(skb, off,
+					  offsetof(struct udphdr, check))) {
+			err = -EPROTO;
+			goto out;
+		}
+
+		if (recalculate)
+			udp_hdr(skb)->check =
+				~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
+						 &ipv6_hdr(skb)->daddr,
+						 skb->len - off,
+						 IPPROTO_UDP, 0);
+		break;
+	default:
+		goto out;
+	}
+
+	err = 0;
+
+out:
+	return err;
+}
+
+/**
+ * skb_checksum_setup - set up partial checksum offset
+ * @skb: the skb to set up
+ * @recalculate: if true the pseudo-header checksum will be recalculated
+ */
+int skb_checksum_setup(struct sk_buff *skb, bool recalculate)
+{
+	int err;
+
+	switch (skb->protocol) {
+	case htons(ETH_P_IP):
+		err = skb_checksum_setup_ip(skb, recalculate);
+		break;
+
+	case htons(ETH_P_IPV6):
+		err = skb_checksum_setup_ipv6(skb, recalculate);
+		break;
+
+	default:
+		err = -EPROTO;
+		break;
+	}
+
+	return err;
+}
+EXPORT_SYMBOL(skb_checksum_setup);
+
 void __skb_warn_lro_forwarding(const struct sk_buff *skb)
 {
 	net_warn_ratelimited("%s: received packets cannot be forwarded while LRO is enabled\n",
-- 
1.7.10.4

  reply	other threads:[~2014-01-09 10:02 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-09 10:02 [PATCH net-next v2 0/3] make skb_checksum_setup generally available Paul Durrant
2014-01-09 10:02 ` Paul Durrant [this message]
2014-01-13 11:26   ` [PATCH net-next v2 1/3] net: add skb_checksum_setup Paul Durrant
2014-01-13 13:40     ` Nicolas Dichtel
2014-01-09 10:02 ` [PATCH net-next v2 2/3] xen-netback: use new skb_checksum_setup function Paul Durrant
2014-01-09 12:26   ` Wei Liu
2014-01-09 10:02 ` [PATCH net-next v2 3/3] xen-netfront: " Paul Durrant
2014-01-13 19:27   ` David Miller
2014-01-14  9:33     ` [Xen-devel] " Ian Campbell
2014-01-14 22:24 ` [PATCH net-next v2 0/3] make skb_checksum_setup generally available David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1389261768-30606-2-git-send-email-paul.durrant@citrix.com \
    --to=paul.durrant@citrix.com \
    --cc=alexander.h.duyck@intel.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=netdev@vger.kernel.org \
    --cc=nicolas.dichtel@6wind.com \
    --cc=vfalico@redhat.com \
    --cc=xen-devel@lists.xen.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).