From mboxrd@z Thu Jan 1 00:00:00 1970 From: Shahed Shaikh Subject: [PATCH net-next 7/8] qlcnic: Enable IPv6 LRO even if IP address is not programmed Date: Fri, 10 Jan 2014 11:48:58 -0500 Message-ID: <1389372539-13753-8-git-send-email-shahed.shaikh@qlogic.com> References: <1389372539-13753-1-git-send-email-shahed.shaikh@qlogic.com> Mime-Version: 1.0 Content-Type: text/plain Cc: , , Shahed Shaikh To: Return-path: Received: from mx0b-0016ce01.pphosted.com ([67.231.156.153]:53999 "EHLO mx0b-0016ce01.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753146AbaAJRXr (ORCPT ); Fri, 10 Jan 2014 12:23:47 -0500 In-Reply-To: <1389372539-13753-1-git-send-email-shahed.shaikh@qlogic.com> Sender: netdev-owner@vger.kernel.org List-ID: From: Shahed Shaikh o Enabling BIT_9 while configuring hardware LRO allows adapter to perform LRO even if destination IP address is not programmed in adapter. Signed-off-by: Shahed Shaikh --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c index e96b76d..6ca5e57 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c @@ -782,8 +782,8 @@ void qlcnic_82xx_config_intr_coalesce(struct qlcnic_adapter *adapter) "Could not send interrupt coalescing parameters\n"); } -#define QLCNIC_ENABLE_IPV4_LRO 1 -#define QLCNIC_ENABLE_IPV6_LRO 2 +#define QLCNIC_ENABLE_IPV4_LRO BIT_0 +#define QLCNIC_ENABLE_IPV6_LRO (BIT_1 | BIT_9) int qlcnic_82xx_config_hw_lro(struct qlcnic_adapter *adapter, int enable) { -- 1.8.3.1