Netdev List
 help / color / mirror / Atom feed
From: Yuval Mintz <yuvalmin@broadcom.com>
To: <davem@davemloft.net>, <netdev@vger.kernel.org>
Cc: Yuval Mintz <yuvalmin@broadcom.com>, Ariel Elior <ariele@broadcom.com>
Subject: [PATCH net] bnx2x: Don't release PCI bars on shutdown
Date: Wed, 15 Jan 2014 12:05:30 +0200	[thread overview]
Message-ID: <1389780330-6927-1-git-send-email-yuvalmin@broadcom.com> (raw)

The bnx2x driver in its pci shutdown() callback releases its pci bars (in the
same manner it does during its pci remove() callback).
During a system reboot while VFs are enabled, its possible for the VF's remove
to be called (as a result of pci_disable_sriov()) after its shutdown callback
has already finished running; This will cause a paging request fault as the VF
tries to access the pci bar which it has previously released, crashing the
system.

This patch further differentiates the shutdown and remove callbacks, preventing the
pci release procedures from being called during shutdown.

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
---
Hi Dave,

Please accept this patch to `net'.

Thanks,
Yuval
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 29 ++++++++++++------------
 1 file changed, 15 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 8b3107b..7b3b5cc 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -12942,25 +12942,26 @@ static void __bnx2x_remove(struct pci_dev *pdev,
 		pci_set_power_state(pdev, PCI_D3hot);
 	}
 
-	if (bp->regview)
-		iounmap(bp->regview);
+	if (remove_netdev) {
+		if (bp->regview)
+			iounmap(bp->regview);
 
-	/* for vf doorbells are part of the regview and were unmapped along with
-	 * it. FW is only loaded by PF.
-	 */
-	if (IS_PF(bp)) {
-		if (bp->doorbells)
-			iounmap(bp->doorbells);
+		/* For vfs, doorbells are part of the regview and were unmapped
+		 * along with it. FW is only loaded by PF.
+		 */
+		if (IS_PF(bp)) {
+			if (bp->doorbells)
+				iounmap(bp->doorbells);
 
-		bnx2x_release_firmware(bp);
-	}
-	bnx2x_free_mem_bp(bp);
+			bnx2x_release_firmware(bp);
+		}
+		bnx2x_free_mem_bp(bp);
 
-	if (remove_netdev)
 		free_netdev(dev);
 
-	if (atomic_read(&pdev->enable_cnt) == 1)
-		pci_release_regions(pdev);
+		if (atomic_read(&pdev->enable_cnt) == 1)
+			pci_release_regions(pdev);
+	}
 
 	pci_disable_device(pdev);
 }
-- 
1.8.1.227.g44fe835

             reply	other threads:[~2014-01-15 10:05 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-15 10:05 Yuval Mintz [this message]
2014-01-16  0:49 ` [PATCH net] bnx2x: Don't release PCI bars on shutdown David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1389780330-6927-1-git-send-email-yuvalmin@broadcom.com \
    --to=yuvalmin@broadcom.com \
    --cc=ariele@broadcom.com \
    --cc=davem@davemloft.net \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox