Netdev List
 help / color / mirror / Atom feed
From: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
To: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
	Giuseppe Cavallaro <peppe.cavallaro-qxv4g6HH51o@public.gmane.org>,
	Srinivas Kandagatla
	<srinivas.kandagatla-qxv4g6HH51o@public.gmane.org>,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH net-next v3 8/8] net: stmmac: sunxi platform extensions for GMAC in Allwinner A20 SoC's
Date: Fri, 17 Jan 2014 21:24:47 +0800	[thread overview]
Message-ID: <1389965087-21971-9-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1389965087-21971-1-git-send-email-wens-jdAy2FN1RRM@public.gmane.org>

The Allwinner A20 has an ethernet controller that seems to be
an early version of Synopsys DesignWare MAC 10/100/1000 Universal,
which is supported by the stmmac driver.

Allwinner's GMAC requires setting additional registers in the SoC's
clock control unit.

The exact version of the DWMAC IP that Allwinner uses is unknown,
thus the exact feature set is unknown.

Signed-off-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
---
 .../bindings/net/allwinner,sun7i-a20-gmac.txt      |  27 ++++
 drivers/net/ethernet/stmicro/stmmac/Kconfig        |  11 ++
 drivers/net/ethernet/stmicro/stmmac/Makefile       |   1 +
 drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c  | 141 +++++++++++++++++++++
 drivers/net/ethernet/stmicro/stmmac/stmmac.h       |   3 +
 .../net/ethernet/stmicro/stmmac/stmmac_platform.c  |   3 +
 6 files changed, 186 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt
 create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c

diff --git a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt
new file mode 100644
index 0000000..ea4d752
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt
@@ -0,0 +1,27 @@
+* Allwinner GMAC ethernet controller
+
+This device is a platform glue layer for stmmac.
+Please see stmmac.txt for the other unchanged properties.
+
+Required properties:
+ - compatible:  Should be "allwinner,sun7i-a20-gmac"
+ - clocks: Should contain the GMAC main clock, and tx clock
+   The tx clock type should be "allwinner,sun7i-a20-gmac-clk"
+ - clock-names: Should contain the clock names "stmmaceth",
+   and "allwinner_gmac_tx"
+
+Optional properties:
+- phy-supply: phandle to a regulator if the PHY needs one
+
+Examples:
+
+	gmac: ethernet@01c50000 {
+		compatible = "allwinner,sun7i-a20-gmac";
+		reg = <0x01c50000 0x10000>,
+		      <0x01c20164 0x4>;
+		interrupts = <0 85 1>;
+		interrupt-names = "macirq";
+		clocks = <&ahb_gates 49>, <&gmac_tx>;
+		clock-names = "stmmaceth", "allwinner_gmac_tx";
+		phy-mode = "mii";
+	};
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index b59d1ef..e2f202e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -26,6 +26,17 @@ config STMMAC_PLATFORM
 
 	  If unsure, say N.
 
+config DWMAC_SUNXI
+	bool "Allwinner GMAC support"
+	depends on STMMAC_PLATFORM && ARCH_SUNXI
+	default y
+	---help---
+	  Support for Allwinner A20/A31 GMAC ethernet controllers.
+
+	  This selects Allwinner SoC glue layer support for the
+	  stmmac device driver. This driver is used for A20/A31
+	  GMAC 	  ethernet controller.
+
 config STMMAC_PCI
 	bool "STMMAC PCI bus support"
 	depends on STMMAC_ETH && PCI
diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
index 356a9dd..ecadece 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Makefile
+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
@@ -1,6 +1,7 @@
 obj-$(CONFIG_STMMAC_ETH) += stmmac.o
 stmmac-$(CONFIG_STMMAC_PLATFORM) += stmmac_platform.o
 stmmac-$(CONFIG_STMMAC_PCI) += stmmac_pci.o
+stmmac-$(CONFIG_DWMAC_SUNXI) += dwmac-sunxi.o
 stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o ring_mode.o	\
 	      chain_mode.o dwmac_lib.o dwmac1000_core.o  dwmac1000_dma.o \
 	      dwmac100_core.o dwmac100_dma.o enh_desc.o  norm_desc.o \
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
new file mode 100644
index 0000000..dc4f8ae
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
@@ -0,0 +1,141 @@
+/**
+ * dwmac-sunxi.c - Allwinner sunxi DWMAC specific glue layer
+ *
+ * Copyright (C) 2013 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai  <wens-jdAy2FN1RRM@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/stmmac.h>
+#include <linux/clk.h>
+#include <linux/phy.h>
+#include <linux/of_net.h>
+#include <linux/regulator/consumer.h>
+
+struct sunxi_priv_data {
+	int interface;
+	int clk_enabled;
+	struct clk *tx_clk;
+	struct regulator *regulator;
+};
+
+static void *sun7i_gmac_setup(struct platform_device *pdev)
+{
+	struct sunxi_priv_data *gmac;
+	struct device *dev = &pdev->dev;
+
+	gmac = devm_kzalloc(dev, sizeof(*gmac), GFP_KERNEL);
+	if (!gmac)
+		return ERR_PTR(-ENOMEM);
+
+	gmac->interface = of_get_phy_mode(dev->of_node);
+
+	gmac->tx_clk = devm_clk_get(dev, "allwinner_gmac_tx");
+	if (IS_ERR(gmac->tx_clk)) {
+		dev_err(dev, "could not get tx clock\n");
+		return gmac->tx_clk;
+	}
+
+	/* Optional regulator for PHY */
+	gmac->regulator = devm_regulator_get_optional(dev, "phy");
+	if (IS_ERR(gmac->regulator)) {
+		if (PTR_ERR(gmac->regulator) == -EPROBE_DEFER)
+			return ERR_PTR(-EPROBE_DEFER);
+		dev_info(dev, "no regulator found\n");
+		gmac->regulator = NULL;
+	}
+
+	return gmac;
+}
+
+#define SUN7I_GMAC_GMII_RGMII_RATE	125000000
+#define SUN7I_GMAC_MII_RATE		25000000
+
+static int sun7i_gmac_init(struct platform_device *pdev, void *priv)
+{
+	struct sunxi_priv_data *gmac = priv;
+	int ret;
+
+	if (gmac->regulator) {
+		ret = regulator_enable(gmac->regulator);
+		if (ret)
+			return ret;
+	}
+
+	/* Set GMAC interface port mode
+	 *
+	 * The GMAC TX clock lines are configured by setting the clock
+	 * rate, which then uses the auto-reparenting feature of the
+	 * clock driver, and enabling/disabling the clock.
+	 */
+	if (gmac->interface == PHY_INTERFACE_MODE_RGMII) {
+		clk_set_rate(gmac->tx_clk, SUN7I_GMAC_GMII_RGMII_RATE);
+		clk_prepare_enable(gmac->tx_clk);
+		gmac->clk_enabled = 1;
+	} else {
+		clk_set_rate(gmac->tx_clk, SUN7I_GMAC_MII_RATE);
+		clk_prepare(gmac->tx_clk);
+	}
+
+	return 0;
+}
+
+static void sun7i_gmac_exit(struct platform_device *pdev, void *priv)
+{
+	struct sunxi_priv_data *gmac = priv;
+
+	if (gmac->clk_enabled) {
+		clk_disable(gmac->tx_clk);
+		gmac->clk_enabled = 0;
+	}
+	clk_unprepare(gmac->tx_clk);
+
+	if (gmac->regulator)
+		regulator_disable(gmac->regulator);
+}
+
+static void sun7i_fix_speed(void *priv, unsigned int speed)
+{
+	struct sunxi_priv_data *gmac = priv;
+
+	/* only GMII mode requires us to reconfigure the clock lines */
+	if (gmac->interface != PHY_INTERFACE_MODE_GMII)
+		return;
+
+	if (gmac->clk_enabled) {
+		clk_disable(gmac->tx_clk);
+		gmac->clk_enabled = 0;
+	}
+	clk_unprepare(gmac->tx_clk);
+
+	if (speed == 1000) {
+		clk_set_rate(gmac->tx_clk, SUN7I_GMAC_GMII_RGMII_RATE);
+		clk_prepare_enable(gmac->tx_clk);
+		gmac->clk_enabled = 1;
+	} else {
+		clk_set_rate(gmac->tx_clk, SUN7I_GMAC_MII_RATE);
+		clk_prepare(gmac->tx_clk);
+	}
+}
+
+/* of_data specifying hardware features and callbacks.
+ * hardware features were copied from Allwinner drivers. */
+const struct stmmac_of_data sun7i_gmac_data = {
+	.has_gmac = 1,
+	.tx_coe = 1,
+	.fix_mac_speed = sun7i_fix_speed,
+	.setup = sun7i_gmac_setup,
+	.init = sun7i_gmac_init,
+	.exit = sun7i_gmac_exit,
+};
+
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index c1c141f..d9af26e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -130,6 +130,9 @@ void stmmac_disable_eee_mode(struct stmmac_priv *priv);
 bool stmmac_eee_init(struct stmmac_priv *priv);
 
 #ifdef CONFIG_STMMAC_PLATFORM
+#ifdef CONFIG_DWMAC_SUNXI
+extern const struct stmmac_of_data sun7i_gmac_data;
+#endif
 extern struct platform_driver stmmac_pltfr_driver;
 static inline int stmmac_register_platform(void)
 {
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index bf119db..9d4baa8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -30,6 +30,9 @@
 #include "stmmac.h"
 
 static const struct of_device_id stmmac_dt_ids[] = {
+#ifdef CONFIG_DWMAC_SUNXI
+	{ .compatible = "allwinner,sun7i-a20-gmac", .data = &sun7i_gmac_data},
+#endif
 	/* SoC specific glue layers should come before generic bindings */
 	{ .compatible = "st,spear600-gmac"},
 	{ .compatible = "snps,dwmac-3.610"},
-- 
1.8.5.2

  parent reply	other threads:[~2014-01-17 13:24 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-17 13:24 [PATCH net-next v3 0/8] net: stmmac: Add Allwinner A20 GMAC ethernet Chen-Yu Tsai
     [not found] ` <1389965087-21971-1-git-send-email-wens-jdAy2FN1RRM@public.gmane.org>
2014-01-17 13:24   ` [PATCH net-next v3 1/8] net: stmmac: Enable stmmac main clock when probing hardware Chen-Yu Tsai
2014-01-17 13:24   ` [PATCH net-next v3 2/8] net: stmmac: Add support for optional reset control Chen-Yu Tsai
2014-01-17 13:24   ` [PATCH net-next v3 3/8] net: stmmac: Allocate and pass soc/board specific data to callbacks Chen-Yu Tsai
2014-01-17 13:24   ` [PATCH net-next v3 4/8] blackfin: Update stmmac callback signatures Chen-Yu Tsai
2014-01-17 13:24   ` [PATCH net-next v3 5/8] net: stmmac: Honor DT parameter to force DMA store and forward mode Chen-Yu Tsai
2014-01-17 13:24   ` [PATCH net-next v3 6/8] net: stmmac: Deprecate snps,phy-addr and auto-detect PHY address Chen-Yu Tsai
2014-01-17 13:24   ` [PATCH net-next v3 7/8] net: stmmac: Use driver data and callbacks tied with compatible strings Chen-Yu Tsai
2014-01-17 13:24   ` Chen-Yu Tsai [this message]
2014-01-20  4:03   ` [PATCH net-next v3 0/8] net: stmmac: Add Allwinner A20 GMAC ethernet David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1389965087-21971-9-git-send-email-wens@csie.org \
    --to=wens-jday2fn1rrm@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
    --cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=peppe.cavallaro-qxv4g6HH51o@public.gmane.org \
    --cc=srinivas.kandagatla-qxv4g6HH51o@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox