From: Nikolay Aleksandrov <nikolay@redhat.com>
To: netdev@vger.kernel.org
Cc: Nikolay Aleksandrov <nikolay@redhat.com>
Subject: [PATCH net-next v2 16/25] bonding: convert miimon to use the new option API
Date: Wed, 22 Jan 2014 14:53:31 +0100 [thread overview]
Message-ID: <1390398820-5355-17-git-send-email-nikolay@redhat.com> (raw)
In-Reply-To: <1390398820-5355-1-git-send-email-nikolay@redhat.com>
This patch adds the necessary changes so miimon would use
the new bonding option API. The "default" definition has been removed as
it was 0.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
---
drivers/net/bonding/bond_main.c | 9 ++++-----
drivers/net/bonding/bond_netlink.c | 3 ++-
drivers/net/bonding/bond_options.c | 25 ++++++++++++++-----------
drivers/net/bonding/bond_options.h | 2 ++
drivers/net/bonding/bond_sysfs.c | 14 ++------------
drivers/net/bonding/bonding.h | 1 -
6 files changed, 24 insertions(+), 30 deletions(-)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 8f3f9f0..f606e2c 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -86,12 +86,11 @@
/*---------------------------- Module parameters ----------------------------*/
/* monitor all links that often (in milliseconds). <=0 disables monitoring */
-#define BOND_LINK_MON_INTERV 0
static int max_bonds = BOND_DEFAULT_MAX_BONDS;
static int tx_queues = BOND_DEFAULT_TX_QUEUES;
static int num_peer_notif = 1;
-static int miimon = BOND_LINK_MON_INTERV;
+static int miimon;
static int updelay;
static int downdelay;
static int use_carrier = 1;
@@ -4046,9 +4045,9 @@ static int bond_check_params(struct bond_params *params)
}
if (miimon < 0) {
- pr_warning("Warning: miimon module parameter (%d), not in range 0-%d, so it was reset to %d\n",
- miimon, INT_MAX, BOND_LINK_MON_INTERV);
- miimon = BOND_LINK_MON_INTERV;
+ pr_warning("Warning: miimon module parameter (%d), not in range 0-%d, so it was reset to 0\n",
+ miimon, INT_MAX);
+ miimon = 0;
}
if (updelay < 0) {
diff --git a/drivers/net/bonding/bond_netlink.c b/drivers/net/bonding/bond_netlink.c
index 6855f28..64e45c9 100644
--- a/drivers/net/bonding/bond_netlink.c
+++ b/drivers/net/bonding/bond_netlink.c
@@ -132,7 +132,8 @@ static int bond_changelink(struct net_device *bond_dev,
if (data[IFLA_BOND_MIIMON]) {
miimon = nla_get_u32(data[IFLA_BOND_MIIMON]);
- err = bond_option_miimon_set(bond, miimon);
+ bond_opt_initval(&newval, miimon);
+ err = __bond_opt_set(bond, BOND_OPT_MIIMON, &newval);
if (err)
return err;
}
diff --git a/drivers/net/bonding/bond_options.c b/drivers/net/bonding/bond_options.c
index 1bd19f1..cb515d9 100644
--- a/drivers/net/bonding/bond_options.c
+++ b/drivers/net/bonding/bond_options.c
@@ -200,6 +200,13 @@ static struct bond_option bond_opts[] = {
.values = bond_num_peer_notif_tbl,
.set = bond_option_num_peer_notif_set
},
+ [BOND_OPT_MIIMON] = {
+ .id = BOND_OPT_MIIMON,
+ .name = "miimon",
+ .desc = "Link check interval in milliseconds",
+ .values = bond_intmax_tbl,
+ .set = bond_option_miimon_set
+ },
{ }
};
@@ -575,16 +582,11 @@ int bond_option_active_slave_set(struct bonding *bond,
return ret;
}
-int bond_option_miimon_set(struct bonding *bond, int miimon)
+int bond_option_miimon_set(struct bonding *bond, struct bond_opt_value *newval)
{
- if (miimon < 0) {
- pr_err("%s: Invalid miimon value %d not in range %d-%d; rejected.\n",
- bond->dev->name, miimon, 0, INT_MAX);
- return -EINVAL;
- }
- pr_info("%s: Setting MII monitoring interval to %d.\n",
- bond->dev->name, miimon);
- bond->params.miimon = miimon;
+ pr_info("%s: Setting MII monitoring interval to %llu.\n",
+ bond->dev->name, newval->value);
+ bond->params.miimon = newval->value;
if (bond->params.updelay)
pr_info("%s: Note: Updating updelay (to %d) since it is a multiple of the miimon value.\n",
bond->dev->name,
@@ -593,7 +595,7 @@ int bond_option_miimon_set(struct bonding *bond, int miimon)
pr_info("%s: Note: Updating downdelay (to %d) since it is a multiple of the miimon value.\n",
bond->dev->name,
bond->params.downdelay * bond->params.miimon);
- if (miimon && bond->params.arp_interval) {
+ if (newval->value && bond->params.arp_interval) {
pr_info("%s: MII monitoring cannot be used with ARP monitoring. Disabling ARP monitoring...\n",
bond->dev->name);
bond->params.arp_interval = 0;
@@ -606,13 +608,14 @@ int bond_option_miimon_set(struct bonding *bond, int miimon)
* timer will get fired off when the open function
* is called.
*/
- if (!miimon) {
+ if (!newval->value) {
cancel_delayed_work_sync(&bond->mii_work);
} else {
cancel_delayed_work_sync(&bond->arp_work);
queue_delayed_work(bond->wq, &bond->mii_work, 0);
}
}
+
return 0;
}
diff --git a/drivers/net/bonding/bond_options.h b/drivers/net/bonding/bond_options.h
index 014a359..90f00c6 100644
--- a/drivers/net/bonding/bond_options.h
+++ b/drivers/net/bonding/bond_options.h
@@ -52,6 +52,7 @@ enum {
BOND_OPT_MINLINKS,
BOND_OPT_AD_SELECT,
BOND_OPT_NUM_PEER_NOTIF,
+ BOND_OPT_MIIMON,
BOND_OPT_LAST
};
@@ -139,4 +140,5 @@ int bond_option_ad_select_set(struct bonding *bond,
struct bond_opt_value *newval);
int bond_option_num_peer_notif_set(struct bonding *bond,
struct bond_opt_value *newval);
+int bond_option_miimon_set(struct bonding *bond, struct bond_opt_value *newval);
#endif /* _BOND_OPTIONS_H */
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index e1c99db..3f6e4d6 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -673,23 +673,13 @@ static ssize_t bonding_store_miimon(struct device *d,
struct device_attribute *attr,
const char *buf, size_t count)
{
- int new_value, ret;
struct bonding *bond = to_bond(d);
+ int ret;
- if (sscanf(buf, "%d", &new_value) != 1) {
- pr_err("%s: no miimon value specified.\n",
- bond->dev->name);
- return -EINVAL;
- }
-
- if (!rtnl_trylock())
- return restart_syscall();
-
- ret = bond_option_miimon_set(bond, new_value);
+ ret = bond_opt_tryset_rtnl(bond, BOND_OPT_MIIMON, (char *)buf);
if (!ret)
ret = count;
- rtnl_unlock();
return ret;
}
static DEVICE_ATTR(miimon, S_IRUGO | S_IWUSR,
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index 4554a16..4d04619 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -453,7 +453,6 @@ unsigned int bond_get_num_tx_queues(void);
int bond_netlink_init(void);
void bond_netlink_fini(void);
int bond_option_active_slave_set(struct bonding *bond, struct net_device *slave_dev);
-int bond_option_miimon_set(struct bonding *bond, int miimon);
int bond_option_use_carrier_set(struct bonding *bond, int use_carrier);
int bond_option_arp_ip_target_add(struct bonding *bond, __be32 target);
int bond_option_arp_ip_target_rem(struct bonding *bond, __be32 target);
--
1.8.4.2
next prev parent reply other threads:[~2014-01-22 13:54 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-22 13:53 [PATCH net-next v2 00/25] bonding: introduce new option API Nikolay Aleksandrov
2014-01-22 13:53 ` [PATCH net-next v2 01/25] bonding: add infrastructure for an " Nikolay Aleksandrov
2014-01-22 13:53 ` [PATCH net-next v2 02/25] bonding: convert mode setting to use the new " Nikolay Aleksandrov
2014-01-22 13:53 ` [PATCH net-next v2 03/25] bonding: convert packets_per_slave " Nikolay Aleksandrov
2014-01-22 13:53 ` [PATCH net-next v2 04/25] bonding: convert xmit_hash_policy " Nikolay Aleksandrov
2014-01-22 13:53 ` [PATCH net-next v2 05/25] bonding: convert arp_validate " Nikolay Aleksandrov
2014-01-22 13:53 ` [PATCH net-next v2 06/25] bonding: convert arp_all_targets " Nikolay Aleksandrov
2014-01-22 13:53 ` [PATCH net-next v2 07/25] bonding: convert fail_over_mac " Nikolay Aleksandrov
2014-01-22 13:53 ` [PATCH net-next v2 08/25] bonding: convert arp_interval " Nikolay Aleksandrov
2014-01-22 13:53 ` [PATCH net-next v2 09/25] bonding: convert arp_ip_target " Nikolay Aleksandrov
2014-01-22 13:53 ` [PATCH net-next v2 10/25] bonding: convert downdelay " Nikolay Aleksandrov
2014-01-22 13:53 ` [PATCH net-next v2 11/25] bonding: convert updelay " Nikolay Aleksandrov
2014-01-22 13:53 ` [PATCH net-next v2 12/25] bonding: convert lacp_rate " Nikolay Aleksandrov
2014-01-22 13:53 ` [PATCH net-next v2 13/25] bonding: convert min_links " Nikolay Aleksandrov
2014-01-22 13:53 ` [PATCH net-next v2 14/25] bonding: convert ad_select " Nikolay Aleksandrov
2014-01-22 13:53 ` [PATCH net-next v2 15/25] bonding: convert num_peer_notif " Nikolay Aleksandrov
2014-01-22 13:53 ` Nikolay Aleksandrov [this message]
2014-01-22 13:53 ` [PATCH net-next v2 17/25] bonding: convert primary " Nikolay Aleksandrov
2014-01-22 13:53 ` [PATCH net-next v2 18/25] bonding: convert primary_reselect " Nikolay Aleksandrov
2014-01-22 13:53 ` [PATCH net-next v2 19/25] bonding: convert use_carrier " Nikolay Aleksandrov
2014-01-22 13:53 ` [PATCH net-next v2 20/25] bonding: convert active_slave " Nikolay Aleksandrov
2014-01-22 13:53 ` [PATCH net-next v2 21/25] bonding: convert queue_id " Nikolay Aleksandrov
2014-01-22 13:53 ` [PATCH net-next v2 22/25] bonding: convert all_slaves_active " Nikolay Aleksandrov
2014-01-22 13:53 ` [PATCH net-next v2 23/25] bonding: convert resend_igmp " Nikolay Aleksandrov
2014-01-22 13:53 ` [PATCH net-next v2 24/25] bonding: convert lp_interval " Nikolay Aleksandrov
2014-01-22 13:53 ` [PATCH net-next v2 25/25] bonding: convert slaves " Nikolay Aleksandrov
2014-01-23 0:29 ` [PATCH net-next v2 00/25] bonding: introduce " David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1390398820-5355-17-git-send-email-nikolay@redhat.com \
--to=nikolay@redhat.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox