netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Aaron Brown <aaron.f.brown@intel.com>
To: davem@davemloft.net
Cc: Mitch Williams <mitch.a.williams@intel.com>,
	netdev@vger.kernel.org, gospo@redhat.com, sassmann@redhat.com,
	Jesse Brandeburg <jesse.brandeburg@intel.com>,
	Aaron Brown <aaron.f.brown@intel.com>
Subject: [net-next 12/14] i40e: tighten up ring enable/disable flow
Date: Fri, 14 Feb 2014 14:58:06 -0800	[thread overview]
Message-ID: <1392418688-23895-13-git-send-email-aaron.f.brown@intel.com> (raw)
In-Reply-To: <1392418688-23895-1-git-send-email-aaron.f.brown@intel.com>

From: Mitch Williams <mitch.a.williams@intel.com>

Change the do/while to a for loop, so we don't hit the delay each
time, even when the register is ready for action.
Don't bother to set or clear the QENA_STAT bit as it is
read-only.

Change-ID: Ie464718804dd79f6d726f291caa9b0c872b49978
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Aaron Brown <aaron.f.brown@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 32 ++++++++++++++---------------
 1 file changed, 15 insertions(+), 17 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 628e917..4a19073 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -3108,13 +3108,13 @@ static int i40e_vsi_control_tx(struct i40e_vsi *vsi, bool enable)
 
 	pf_q = vsi->base_queue;
 	for (i = 0; i < vsi->num_queue_pairs; i++, pf_q++) {
-		j = 1000;
-		do {
-			usleep_range(1000, 2000);
+		for (j = 0; j < 50; j++) {
 			tx_reg = rd32(hw, I40E_QTX_ENA(pf_q));
-		} while (j-- && ((tx_reg >> I40E_QTX_ENA_QENA_REQ_SHIFT)
-			       ^ (tx_reg >> I40E_QTX_ENA_QENA_STAT_SHIFT)) & 1);
-
+			if (((tx_reg >> I40E_QTX_ENA_QENA_REQ_SHIFT) & 1) ==
+			    ((tx_reg >> I40E_QTX_ENA_QENA_STAT_SHIFT) & 1))
+				break;
+			usleep_range(1000, 2000);
+		}
 		/* Skip if the queue is already in the requested state */
 		if (enable && (tx_reg & I40E_QTX_ENA_QENA_STAT_MASK))
 			continue;
@@ -3124,8 +3124,7 @@ static int i40e_vsi_control_tx(struct i40e_vsi *vsi, bool enable)
 		/* turn on/off the queue */
 		if (enable) {
 			wr32(hw, I40E_QTX_HEAD(pf_q), 0);
-			tx_reg |= I40E_QTX_ENA_QENA_REQ_MASK |
-				  I40E_QTX_ENA_QENA_STAT_MASK;
+			tx_reg |= I40E_QTX_ENA_QENA_REQ_MASK;
 		} else {
 			tx_reg &= ~I40E_QTX_ENA_QENA_REQ_MASK;
 		}
@@ -3172,12 +3171,13 @@ static int i40e_vsi_control_rx(struct i40e_vsi *vsi, bool enable)
 
 	pf_q = vsi->base_queue;
 	for (i = 0; i < vsi->num_queue_pairs; i++, pf_q++) {
-		j = 1000;
-		do {
-			usleep_range(1000, 2000);
+		for (j = 0; j < 50; j++) {
 			rx_reg = rd32(hw, I40E_QRX_ENA(pf_q));
-		} while (j-- && ((rx_reg >> I40E_QRX_ENA_QENA_REQ_SHIFT)
-			       ^ (rx_reg >> I40E_QRX_ENA_QENA_STAT_SHIFT)) & 1);
+			if (((rx_reg >> I40E_QRX_ENA_QENA_REQ_SHIFT) & 1) ==
+			    ((rx_reg >> I40E_QRX_ENA_QENA_STAT_SHIFT) & 1))
+				break;
+			usleep_range(1000, 2000);
+		}
 
 		if (enable) {
 			/* is STAT set ? */
@@ -3191,11 +3191,9 @@ static int i40e_vsi_control_rx(struct i40e_vsi *vsi, bool enable)
 
 		/* turn on/off the queue */
 		if (enable)
-			rx_reg |= I40E_QRX_ENA_QENA_REQ_MASK |
-				  I40E_QRX_ENA_QENA_STAT_MASK;
+			rx_reg |= I40E_QRX_ENA_QENA_REQ_MASK;
 		else
-			rx_reg &= ~(I40E_QRX_ENA_QENA_REQ_MASK |
-				  I40E_QRX_ENA_QENA_STAT_MASK);
+			rx_reg &= ~I40E_QRX_ENA_QENA_REQ_MASK;
 		wr32(hw, I40E_QRX_ENA(pf_q), rx_reg);
 
 		/* wait for the change to finish */
-- 
1.8.5.GIT

  parent reply	other threads:[~2014-02-14 23:01 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-14 22:57 [net-next 00/14] Intel Wired LAN Driver Updates Aaron Brown
2014-02-14 22:57 ` [net-next 01/14] i40evf: request reset on tx hang Aaron Brown
2014-02-14 22:57 ` [net-next 02/14] i40evf: remove VLAN filters on close Aaron Brown
2014-02-14 22:57 ` [net-next 03/14] i40evf: fix multiple crashes on remove Aaron Brown
2014-02-14 22:57 ` [net-next 04/14] i40evf: get rid of pci_using_dac Aaron Brown
2014-02-14 22:57 ` [net-next 05/14] i40evf: fix up strings in init task Aaron Brown
2014-02-14 23:43   ` Joe Perches
2014-02-14 23:53     ` Williams, Mitch A
2014-02-15  0:05       ` Joe Perches
2014-02-14 22:58 ` [net-next 06/14] i40evf: remove bogus comment Aaron Brown
2014-02-14 22:58 ` [net-next 07/14] i40evf: don't guess device name Aaron Brown
2014-02-14 22:58 ` [net-next 08/14] i40evf: store ring size in ring structs Aaron Brown
2014-02-16  9:13   ` Govindarajulu Varadarajan
2014-02-14 22:58 ` [net-next 09/14] i40evf: update version and copyright date Aaron Brown
2014-02-14 22:58 ` [net-next 10/14] i40evf: remove errant space Aaron Brown
2014-02-14 22:58 ` [net-next 11/14] i40e: remove unnecessary delay Aaron Brown
2014-02-14 22:58 ` Aaron Brown [this message]
2014-02-14 22:58 ` [net-next 13/14] i40e: Change MSIX to MSI-X Aaron Brown
2014-02-14 22:58 ` [net-next 14/14] i40e and i40evf: Bump driver versions Aaron Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1392418688-23895-13-git-send-email-aaron.f.brown@intel.com \
    --to=aaron.f.brown@intel.com \
    --cc=davem@davemloft.net \
    --cc=gospo@redhat.com \
    --cc=jesse.brandeburg@intel.com \
    --cc=mitch.a.williams@intel.com \
    --cc=netdev@vger.kernel.org \
    --cc=sassmann@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).