From: Alexander Aring <alex.aring-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: alex.bluesman.smirnov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Cc: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org,
linux-zigbee-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: [PATCH RFC net-next 2/6] 6lowpan: fix fragmentation on sending side
Date: Sun, 16 Feb 2014 09:34:24 +0100 [thread overview]
Message-ID: <1392539668-2349-3-git-send-email-alex.aring@gmail.com> (raw)
In-Reply-To: <1392539668-2349-1-git-send-email-alex.aring-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
This patch fix the fragmentation on sending side according to rfc4944.
Also add improvement to use the full payload of a PDU which calculate
the nearest divided to 8 payload length for the fragmentation datagram
size attribute.
The main issue is that the datagram size of fragmentation header use the
ipv6 payload length, but rfc4944 says it's the ipv6 payload length inclusive
network header size (and transport header size if compressed).
Signed-off-by: Alexander Aring <alex.aring-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
net/ieee802154/6lowpan.c | 44 ++++++++++++++++++++++++++++++++++----------
1 file changed, 34 insertions(+), 10 deletions(-)
diff --git a/net/ieee802154/6lowpan.c b/net/ieee802154/6lowpan.c
index 8edfea5..0fe0173 100644
--- a/net/ieee802154/6lowpan.c
+++ b/net/ieee802154/6lowpan.c
@@ -106,6 +106,7 @@ static int lowpan_header_create(struct sk_buff *skb,
unsigned short type, const void *_daddr,
const void *_saddr, unsigned int len)
{
+ struct ipv6hdr *hdr;
const u8 *saddr = _saddr;
const u8 *daddr = _daddr;
struct ieee802154_addr sa, da;
@@ -116,12 +117,20 @@ static int lowpan_header_create(struct sk_buff *skb,
if (type != ETH_P_IPV6)
return 0;
+ hdr = ipv6_hdr(skb);
+
if (!saddr)
saddr = dev->dev_addr;
raw_dump_inline(__func__, "saddr", (unsigned char *)saddr, 8);
raw_dump_inline(__func__, "daddr", (unsigned char *)daddr, 8);
+ /* Before replace ipv6hdr to 6lowpan header we save the dgram_size */
+ mac_cb(skb)->frag_info.d_size = len;
+ mac_cb(skb)->frag_info.d_offset = sizeof(struct ipv6hdr);
+ if (hdr->nexthdr == UIP_PROTO_UDP)
+ mac_cb(skb)->frag_info.d_offset += sizeof(struct udphdr);
+
lowpan_header_compress(skb, dev, type, daddr, saddr, len);
/*
@@ -422,44 +431,58 @@ lowpan_fragment_xmit(struct sk_buff *skb, u8 *head,
static int
lowpan_skb_fragmentation(struct sk_buff *skb, struct net_device *dev)
{
- int err, header_length, payload_length, tag, offset = 0;
+ int err, header_length, payload_length, tag, dgram_size,
+ dgram_offset, lowpan_size, frag_plen, offset = 0;
u8 head[5];
header_length = skb->mac_len;
payload_length = skb->len - header_length;
tag = lowpan_dev_info(dev)->fragment_tag++;
+ lowpan_size = skb_network_header_len(skb);
+ dgram_size = mac_cb(skb)->frag_info.d_size;
/* first fragment header */
- head[0] = LOWPAN_DISPATCH_FRAG1 | ((payload_length >> 8) & 0x7);
- head[1] = payload_length & 0xff;
+ head[0] = LOWPAN_DISPATCH_FRAG1 | ((dgram_size >> 8) & 0x7);
+ head[1] = dgram_size & 0xff;
head[2] = tag >> 8;
head[3] = tag & 0xff;
- err = lowpan_fragment_xmit(skb, head, header_length, LOWPAN_FRAG_SIZE,
- 0, LOWPAN_DISPATCH_FRAG1);
+ /* calc the nearest payload length(divided to 8) for first fragment
+ * which fits into a IEEE802154_MTU
+ */
+ frag_plen = round_down(IEEE802154_MTU - header_length -
+ LOWPAN_FRAG1_HEAD_SIZE - lowpan_size -
+ IEEE802154_MFR_SIZE, 8);
+ err = lowpan_fragment_xmit(skb, head, header_length,
+ frag_plen + lowpan_size, 0,
+ LOWPAN_DISPATCH_FRAG1);
if (err) {
pr_debug("%s unable to send FRAG1 packet (tag: %d)",
__func__, tag);
goto exit;
}
- offset = LOWPAN_FRAG_SIZE;
+ offset = lowpan_size + frag_plen;
+ dgram_offset = mac_cb(skb)->frag_info.d_offset + frag_plen;
/* next fragment header */
head[0] &= ~LOWPAN_DISPATCH_FRAG1;
head[0] |= LOWPAN_DISPATCH_FRAGN;
+ frag_plen = round_down(IEEE802154_MTU - header_length -
+ LOWPAN_FRAGN_HEAD_SIZE - IEEE802154_MFR_SIZE, 8);
+
while (payload_length - offset > 0) {
- int len = LOWPAN_FRAG_SIZE;
+ int len = frag_plen;
- head[4] = offset / 8;
+ head[4] = dgram_offset >> 3;
if (payload_length - offset < len)
len = payload_length - offset;
- err = lowpan_fragment_xmit(skb, head, header_length,
- len, offset, LOWPAN_DISPATCH_FRAGN);
+ err = lowpan_fragment_xmit(skb, head, header_length, len,
+ offset, LOWPAN_DISPATCH_FRAGN);
if (err) {
pr_debug("%s unable to send a subsequent FRAGN packet "
"(tag: %d, offset: %d", __func__, tag, offset);
@@ -467,6 +490,7 @@ lowpan_skb_fragmentation(struct sk_buff *skb, struct net_device *dev)
}
offset += len;
+ dgram_offset += len;
}
exit:
--
1.8.5.4
------------------------------------------------------------------------------
Android apps run on BlackBerry 10
Introducing the new BlackBerry 10.2.1 Runtime for Android apps.
Now with support for Jelly Bean, Bluetooth, Mapview and more.
Get your Android app in front of a whole new audience. Start now.
http://pubads.g.doubleclick.net/gampad/clk?id=124407151&iu=/4140/ostg.clktrk
next prev parent reply other threads:[~2014-02-16 8:34 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-16 8:34 [PATCH RFC net-next 0/6] 6lowpan: reimplementation of fragmentation handling Alexander Aring
[not found] ` <1392539668-2349-1-git-send-email-alex.aring-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-02-16 8:34 ` [PATCH RFC net-next 1/6] 6lowpan: add frag information struct Alexander Aring
2014-02-16 8:34 ` Alexander Aring [this message]
2014-02-16 8:34 ` [PATCH RFC net-next 3/6] 6lowpan: move 6lowpan.c to 6lowpan_rtnl.c Alexander Aring
2014-02-16 8:34 ` [PATCH RFC net-next 4/6] 6lowpan: fix some checkpatch issues Alexander Aring
2014-02-16 8:34 ` [PATCH RFC net-next 5/6] net: ns: add ieee802154_6lowpan namespace Alexander Aring
2014-02-16 8:34 ` [PATCH RFC net-next 6/6] 6lowpan: handling 6lowpan fragmentation via inet_frag api Alexander Aring
2014-02-18 19:58 ` [PATCH RFC net-next 0/6] 6lowpan: reimplementation of fragmentation handling Alexander Aring
2014-02-20 8:46 ` Alexander Aring
2014-02-20 18:10 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1392539668-2349-3-git-send-email-alex.aring@gmail.com \
--to=alex.aring-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=alex.bluesman.smirnov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org \
--cc=linux-zigbee-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
--cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).