* [PATCH net-next 01/14] r8152: move some functions
2014-02-18 13:48 [PATCH net-next 00/14] r8152: improvement and new features Hayes Wang
@ 2014-02-18 13:48 ` Hayes Wang
2014-02-18 13:48 ` [PATCH net-next 02/14] r8152: add three functions Hayes Wang
` (13 subsequent siblings)
14 siblings, 0 replies; 22+ messages in thread
From: Hayes Wang @ 2014-02-18 13:48 UTC (permalink / raw)
To: netdev; +Cc: nic_swsd, linux-kernel, linux-usb, Hayes Wang
Move the following functions which is for the further coding.
- rtl_clear_bp
- r8153_clear_bp
- r8153_teredo_off
- r8152b_disable_aldps
- r8152b_enable_aldps
- r8152b_hw_phy_cfg
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
drivers/net/usb/r8152.c | 106 ++++++++++++++++++++++++------------------------
1 file changed, 53 insertions(+), 53 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index d89dbe3..f042a85 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1721,6 +1721,59 @@ static void rtl8152_disable(struct r8152 *tp)
rtl8152_nic_reset(tp);
}
+static void rtl_clear_bp(struct r8152 *tp)
+{
+ ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_0, 0);
+ ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_2, 0);
+ ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_4, 0);
+ ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_6, 0);
+ ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_0, 0);
+ ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_2, 0);
+ ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_4, 0);
+ ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_6, 0);
+ mdelay(3);
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_BP_BA, 0);
+ ocp_write_word(tp, MCU_TYPE_USB, USB_BP_BA, 0);
+}
+
+static void r8153_clear_bp(struct r8152 *tp)
+{
+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_BP_EN, 0);
+ ocp_write_byte(tp, MCU_TYPE_USB, USB_BP_EN, 0);
+ rtl_clear_bp(tp);
+}
+
+static void r8153_teredo_off(struct r8152 *tp)
+{
+ u32 ocp_data;
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG);
+ ocp_data &= ~(TEREDO_SEL | TEREDO_RS_EVENT_MASK | OOB_TEREDO_EN);
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, ocp_data);
+
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_WDT6_CTRL, WDT6_SET_MODE);
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_REALWOW_TIMER, 0);
+ ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TEREDO_TIMER, 0);
+}
+
+static void r8152b_disable_aldps(struct r8152 *tp)
+{
+ ocp_reg_write(tp, OCP_ALDPS_CONFIG, ENPDNPS | LINKENA | DIS_SDSAVE);
+ msleep(20);
+}
+
+static inline void r8152b_enable_aldps(struct r8152 *tp)
+{
+ ocp_reg_write(tp, OCP_ALDPS_CONFIG, ENPWRSAVE | ENPDNPS |
+ LINKENA | DIS_SDSAVE);
+}
+
+static void r8152b_hw_phy_cfg(struct r8152 *tp)
+{
+ r8152_mdio_write(tp, MII_BMCR, BMCR_ANENABLE);
+ r8152b_disable_aldps(tp);
+}
+
static void r8152b_exit_oob(struct r8152 *tp)
{
u32 ocp_data;
@@ -1865,18 +1918,6 @@ static void r8152b_enter_oob(struct r8152 *tp)
ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
}
-static void r8152b_disable_aldps(struct r8152 *tp)
-{
- ocp_reg_write(tp, OCP_ALDPS_CONFIG, ENPDNPS | LINKENA | DIS_SDSAVE);
- msleep(20);
-}
-
-static inline void r8152b_enable_aldps(struct r8152 *tp)
-{
- ocp_reg_write(tp, OCP_ALDPS_CONFIG, ENPWRSAVE | ENPDNPS |
- LINKENA | DIS_SDSAVE);
-}
-
static void r8153_hw_phy_cfg(struct r8152 *tp)
{
u32 ocp_data;
@@ -1961,19 +2002,6 @@ static void r8153_power_cut_en(struct r8152 *tp, int enable)
ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
}
-static void r8153_teredo_off(struct r8152 *tp)
-{
- u32 ocp_data;
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG);
- ocp_data &= ~(TEREDO_SEL | TEREDO_RS_EVENT_MASK | OOB_TEREDO_EN);
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, ocp_data);
-
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_WDT6_CTRL, WDT6_SET_MODE);
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_REALWOW_TIMER, 0);
- ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TEREDO_TIMER, 0);
-}
-
static void r8153_first_init(struct r8152 *tp)
{
u32 ocp_data;
@@ -2308,28 +2336,6 @@ static int rtl8152_close(struct net_device *netdev)
return res;
}
-static void rtl_clear_bp(struct r8152 *tp)
-{
- ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_0, 0);
- ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_2, 0);
- ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_4, 0);
- ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_6, 0);
- ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_0, 0);
- ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_2, 0);
- ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_4, 0);
- ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_6, 0);
- mdelay(3);
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_BP_BA, 0);
- ocp_write_word(tp, MCU_TYPE_USB, USB_BP_BA, 0);
-}
-
-static void r8153_clear_bp(struct r8152 *tp)
-{
- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_BP_EN, 0);
- ocp_write_byte(tp, MCU_TYPE_USB, USB_BP_EN, 0);
- rtl_clear_bp(tp);
-}
-
static void r8152b_enable_eee(struct r8152 *tp)
{
u32 ocp_data;
@@ -2378,12 +2384,6 @@ static void r8152b_enable_fc(struct r8152 *tp)
r8152_mdio_write(tp, MII_ADVERTISE, anar);
}
-static void r8152b_hw_phy_cfg(struct r8152 *tp)
-{
- r8152_mdio_write(tp, MII_BMCR, BMCR_ANENABLE);
- r8152b_disable_aldps(tp);
-}
-
static void r8152b_init(struct r8152 *tp)
{
u32 ocp_data;
--
1.8.4.2
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH net-next 02/14] r8152: add three functions
2014-02-18 13:48 [PATCH net-next 00/14] r8152: improvement and new features Hayes Wang
2014-02-18 13:48 ` [PATCH net-next 01/14] r8152: move some functions Hayes Wang
@ 2014-02-18 13:48 ` Hayes Wang
2014-02-18 13:49 ` [PATCH net-next 03/14] r8152: replace some types from int to bool Hayes Wang
` (12 subsequent siblings)
14 siblings, 0 replies; 22+ messages in thread
From: Hayes Wang @ 2014-02-18 13:48 UTC (permalink / raw)
To: netdev; +Cc: nic_swsd, linux-kernel, linux-usb, Hayes Wang
Replace some codes with the following three functions.
- rtl_drop_queued_tx
- rxdy_gated_en
- r8152_power_cut_en
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
drivers/net/usb/r8152.c | 99 +++++++++++++++++++++++++------------------------
1 file changed, 51 insertions(+), 48 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index f042a85..2d5e761 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1478,6 +1478,17 @@ int r8152_submit_rx(struct r8152 *tp, struct rx_agg *agg, gfp_t mem_flags)
return usb_submit_urb(agg->urb, mem_flags);
}
+static void rtl_drop_queued_tx(struct r8152 *tp)
+{
+ struct net_device_stats *stats = &tp->netdev->stats;
+ struct sk_buff *skb;
+
+ while ((skb = skb_dequeue(&tp->tx_queue))) {
+ dev_kfree_skb(skb);
+ stats->tx_dropped++;
+ }
+}
+
static void rtl8152_tx_timeout(struct net_device *netdev)
{
struct r8152 *tp = netdev_priv(netdev);
@@ -1613,6 +1624,18 @@ static void rtl_set_eee_plus(struct r8152 *tp)
}
}
+static void rxdy_gated_en(struct r8152 *tp, bool enable)
+{
+ u32 ocp_data;
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
+ if (enable)
+ ocp_data |= RXDY_GATED_EN;
+ else
+ ocp_data &= ~RXDY_GATED_EN;
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
+}
+
static int rtl_enable(struct r8152 *tp)
{
u32 ocp_data;
@@ -1624,9 +1647,7 @@ static int rtl_enable(struct r8152 *tp)
ocp_data |= CR_RE | CR_TE;
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, ocp_data);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
- ocp_data &= ~RXDY_GATED_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
+ rxdy_gated_en(tp, false);
INIT_LIST_HEAD(&tp->rx_done);
ret = 0;
@@ -1681,8 +1702,6 @@ static int rtl8153_enable(struct r8152 *tp)
static void rtl8152_disable(struct r8152 *tp)
{
- struct net_device_stats *stats = rtl8152_get_stats(tp->netdev);
- struct sk_buff *skb;
u32 ocp_data;
int i;
@@ -1690,17 +1709,12 @@ static void rtl8152_disable(struct r8152 *tp)
ocp_data &= ~RCR_ACPT_ALL;
ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
- while ((skb = skb_dequeue(&tp->tx_queue))) {
- dev_kfree_skb(skb);
- stats->tx_dropped++;
- }
+ rtl_drop_queued_tx(tp);
for (i = 0; i < RTL8152_MAX_TX; i++)
usb_kill_urb(tp->tx_info[i].urb);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
- ocp_data |= RXDY_GATED_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
+ rxdy_gated_en(tp, true);
for (i = 0; i < 1000; i++) {
ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
@@ -1721,6 +1735,23 @@ static void rtl8152_disable(struct r8152 *tp)
rtl8152_nic_reset(tp);
}
+static void r8152_power_cut_en(struct r8152 *tp, bool enable)
+{
+ u32 ocp_data;
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL);
+ if (enable)
+ ocp_data |= POWER_CUT;
+ else
+ ocp_data &= ~POWER_CUT;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS);
+ ocp_data &= ~RESUME_INDICATE;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS, ocp_data);
+
+}
+
static void rtl_clear_bp(struct r8152 *tp)
{
ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_0, 0);
@@ -1783,9 +1814,7 @@ static void r8152b_exit_oob(struct r8152 *tp)
ocp_data &= ~RCR_ACPT_ALL;
ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
- ocp_data |= RXDY_GATED_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
+ rxdy_gated_en(tp, true);
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, 0x00);
@@ -1909,9 +1938,7 @@ static void r8152b_enter_oob(struct r8152 *tp)
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG5, LAN_WAKE_EN);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
- ocp_data &= ~RXDY_GATED_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
+ rxdy_gated_en(tp, false);
ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
ocp_data |= RCR_APM | RCR_AM | RCR_AB;
@@ -2007,10 +2034,7 @@ static void r8153_first_init(struct r8152 *tp)
u32 ocp_data;
int i;
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
- ocp_data |= RXDY_GATED_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
-
+ rxdy_gated_en(tp, true);
r8153_teredo_off(tp);
ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
@@ -2125,9 +2149,7 @@ static void r8153_enter_oob(struct r8152 *tp)
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG5, LAN_WAKE_EN);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
- ocp_data &= ~RXDY_GATED_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
+ rxdy_gated_en(tp, false);
ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
ocp_data |= RCR_APM | RCR_AM | RCR_AB;
@@ -2231,12 +2253,7 @@ out:
static void rtl8152_down(struct r8152 *tp)
{
- u32 ocp_data;
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL);
- ocp_data &= ~POWER_CUT;
- ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data);
-
+ r8152_power_cut_en(tp, false);
r8152b_disable_aldps(tp);
r8152b_enter_oob(tp);
r8152b_enable_aldps(tp);
@@ -2399,13 +2416,8 @@ static void r8152b_init(struct r8152 *tp)
r8152b_hw_phy_cfg(tp);
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL);
- ocp_data &= ~POWER_CUT;
- ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data);
+ r8152_power_cut_en(tp, false);
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS);
- ocp_data &= ~RESUME_INDICATE;
- ocp_write_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS, ocp_data);
r8152b_exit_oob(tp);
@@ -2659,17 +2671,8 @@ static void r8152b_get_version(struct r8152 *tp)
static void rtl8152_unload(struct r8152 *tp)
{
- u32 ocp_data;
-
- if (tp->version != RTL_VER_01) {
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL);
- ocp_data |= POWER_CUT;
- ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data);
- }
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS);
- ocp_data &= ~RESUME_INDICATE;
- ocp_write_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS, ocp_data);
+ if (tp->version != RTL_VER_01)
+ r8152_power_cut_en(tp, true);
}
static void rtl8153_unload(struct r8152 *tp)
--
1.8.4.2
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH net-next 03/14] r8152: replace some types from int to bool
2014-02-18 13:48 [PATCH net-next 00/14] r8152: improvement and new features Hayes Wang
2014-02-18 13:48 ` [PATCH net-next 01/14] r8152: move some functions Hayes Wang
2014-02-18 13:48 ` [PATCH net-next 02/14] r8152: add three functions Hayes Wang
@ 2014-02-18 13:49 ` Hayes Wang
2014-02-18 13:49 ` [PATCH net-next 04/14] r8152: load the default MAC address Hayes Wang
` (11 subsequent siblings)
14 siblings, 0 replies; 22+ messages in thread
From: Hayes Wang @ 2014-02-18 13:49 UTC (permalink / raw)
To: netdev; +Cc: nic_swsd, linux-kernel, linux-usb, Hayes Wang
Modify the following functions.
- r8153_u1u2en
- r8153_u2p3en
- r8153_power_cut_en
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
drivers/net/usb/r8152.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 2d5e761..4888e4f 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1989,7 +1989,7 @@ static void r8153_hw_phy_cfg(struct r8152 *tp)
sram_write(tp, SRAM_10M_AMP2, data);
}
-static void r8153_u1u2en(struct r8152 *tp, int enable)
+static void r8153_u1u2en(struct r8152 *tp, bool enable)
{
u8 u1u2[8];
@@ -2001,7 +2001,7 @@ static void r8153_u1u2en(struct r8152 *tp, int enable)
usb_ocp_write(tp, USB_TOLERANCE, BYTE_EN_SIX_BYTES, sizeof(u1u2), u1u2);
}
-static void r8153_u2p3en(struct r8152 *tp, int enable)
+static void r8153_u2p3en(struct r8152 *tp, bool enable)
{
u32 ocp_data;
@@ -2013,7 +2013,7 @@ static void r8153_u2p3en(struct r8152 *tp, int enable)
ocp_write_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL, ocp_data);
}
-static void r8153_power_cut_en(struct r8152 *tp, int enable)
+static void r8153_power_cut_en(struct r8152 *tp, bool enable)
{
u32 ocp_data;
@@ -2261,8 +2261,8 @@ static void rtl8152_down(struct r8152 *tp)
static void rtl8153_down(struct r8152 *tp)
{
- r8153_u1u2en(tp, 0);
- r8153_power_cut_en(tp, 0);
+ r8153_u1u2en(tp, false);
+ r8153_power_cut_en(tp, false);
r8153_disable_aldps(tp);
r8153_enter_oob(tp);
r8153_enable_aldps(tp);
@@ -2455,7 +2455,7 @@ static void r8153_init(struct r8152 *tp)
u32 ocp_data;
int i;
- r8153_u1u2en(tp, 0);
+ r8153_u1u2en(tp, false);
for (i = 0; i < 500; i++) {
if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
@@ -2471,7 +2471,7 @@ static void r8153_init(struct r8152 *tp)
msleep(20);
}
- r8153_u2p3en(tp, 0);
+ r8153_u2p3en(tp, false);
ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_WDT11_CTRL);
ocp_data &= ~TIMER11_EN;
@@ -2496,8 +2496,8 @@ static void r8153_init(struct r8152 *tp)
ocp_data |= SEN_VAL_NORMAL | SEL_RXIDLE;
ocp_write_word(tp, MCU_TYPE_USB, USB_AFE_CTRL2, ocp_data);
- r8153_power_cut_en(tp, 0);
- r8153_u1u2en(tp, 1);
+ r8153_power_cut_en(tp, false);
+ r8153_u1u2en(tp, true);
r8153_first_init(tp);
@@ -2677,7 +2677,7 @@ static void rtl8152_unload(struct r8152 *tp)
static void rtl8153_unload(struct r8152 *tp)
{
- r8153_power_cut_en(tp, 1);
+ r8153_power_cut_en(tp, true);
}
static int rtl_ops_init(struct r8152 *tp, const struct usb_device_id *id)
--
1.8.4.2
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH net-next 04/14] r8152: load the default MAC address
2014-02-18 13:48 [PATCH net-next 00/14] r8152: improvement and new features Hayes Wang
` (2 preceding siblings ...)
2014-02-18 13:49 ` [PATCH net-next 03/14] r8152: replace some types from int to bool Hayes Wang
@ 2014-02-18 13:49 ` Hayes Wang
2014-02-18 13:49 ` [PATCH net-next 05/14] r8152: reduce the frequency of spin_lock Hayes Wang
` (10 subsequent siblings)
14 siblings, 0 replies; 22+ messages in thread
From: Hayes Wang @ 2014-02-18 13:49 UTC (permalink / raw)
To: netdev; +Cc: nic_swsd, linux-kernel, linux-usb, Hayes Wang
Except for RTL_VER_01, replace loading the MAC address from PLA_IDR
with from PLA_BACKUP. The default MAC address may be modified by
the other OS, so the PLA_IDR may be not the default MAC address.
The data in the PLA_BACKUP address of the RTL_VER_01 may be destoryed,
so load MAC address from PLA_IDR for RTL_VER_01.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
drivers/net/usb/r8152.c | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 4888e4f..3847c35 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -889,11 +889,26 @@ int r8152_submit_rx(struct r8152 *tp, struct rx_agg *agg, gfp_t mem_flags);
static inline void set_ethernet_addr(struct r8152 *tp)
{
struct net_device *dev = tp->netdev;
+ int ret;
u8 node_id[8] = {0};
- if (pla_ocp_read(tp, PLA_IDR, sizeof(node_id), node_id) < 0)
+ if (tp->version == RTL_VER_01)
+ ret = pla_ocp_read(tp, PLA_IDR, sizeof(node_id), node_id);
+ else
+ ret = pla_ocp_read(tp, PLA_BACKUP, sizeof(node_id), node_id);
+
+ if (ret < 0) {
netif_notice(tp, probe, dev, "inet addr fail\n");
- else {
+ } else {
+ if (tp->version != RTL_VER_01) {
+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR,
+ CRWECR_CONFIG);
+ pla_ocp_write(tp, PLA_IDR, BYTE_EN_SIX_BYTES,
+ sizeof(node_id), node_id);
+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR,
+ CRWECR_NORAML);
+ }
+
memcpy(dev->dev_addr, node_id, dev->addr_len);
memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
}
--
1.8.4.2
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH net-next 05/14] r8152: reduce the frequency of spin_lock
2014-02-18 13:48 [PATCH net-next 00/14] r8152: improvement and new features Hayes Wang
` (3 preceding siblings ...)
2014-02-18 13:49 ` [PATCH net-next 04/14] r8152: load the default MAC address Hayes Wang
@ 2014-02-18 13:49 ` Hayes Wang
2014-02-18 13:49 ` [PATCH net-next 06/14] r8152: clear BMCR_PDOWN Hayes Wang
` (9 subsequent siblings)
14 siblings, 0 replies; 22+ messages in thread
From: Hayes Wang @ 2014-02-18 13:49 UTC (permalink / raw)
To: netdev; +Cc: nic_swsd, linux-kernel, linux-usb, Hayes Wang
Replace getting one item from a list with getting the whole list one time.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
drivers/net/usb/r8152.c | 47 ++++++++++++++++++++++++++++++++++++++---------
1 file changed, 38 insertions(+), 9 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 3847c35..2a778fa 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1299,9 +1299,16 @@ r8152_tx_csum(struct r8152 *tp, struct tx_desc *desc, struct sk_buff *skb)
static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
{
+ struct sk_buff_head skb_head, *tx_queue = &tp->tx_queue;
+ unsigned long flags;
int remain;
u8 *tx_data;
+ __skb_queue_head_init(&skb_head);
+ spin_lock_irqsave(&tx_queue->lock, flags);
+ skb_queue_splice_init(tx_queue, &skb_head);
+ spin_unlock_irqrestore(&tx_queue->lock, flags);
+
tx_data = agg->head;
agg->skb_num = agg->skb_len = 0;
remain = rx_buf_sz;
@@ -1311,14 +1318,14 @@ static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
struct sk_buff *skb;
unsigned int len;
- skb = skb_dequeue(&tp->tx_queue);
+ skb = __skb_dequeue(&skb_head);
if (!skb)
break;
remain -= sizeof(*tx_desc);
len = skb->len;
if (remain < len) {
- skb_queue_head(&tp->tx_queue, skb);
+ __skb_queue_head(&skb_head, skb);
break;
}
@@ -1336,6 +1343,12 @@ static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
remain = rx_buf_sz - (int)(tx_agg_align(tx_data) - agg->head);
}
+ if (!skb_queue_empty(&skb_head)) {
+ spin_lock_irqsave(&tx_queue->lock, flags);
+ skb_queue_splice(&skb_head, tx_queue);
+ spin_unlock_irqrestore(&tx_queue->lock, flags);
+ }
+
netif_tx_lock(tp->netdev);
if (netif_queue_stopped(tp->netdev) &&
@@ -1354,10 +1367,17 @@ static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
static void rx_bottom(struct r8152 *tp)
{
unsigned long flags;
- struct list_head *cursor, *next;
+ struct list_head *cursor, *next, rx_queue;
+ if (list_empty(&tp->rx_done))
+ return;
+
+ INIT_LIST_HEAD(&rx_queue);
spin_lock_irqsave(&tp->rx_lock, flags);
- list_for_each_safe(cursor, next, &tp->rx_done) {
+ list_splice_init(&tp->rx_done, &rx_queue);
+ spin_unlock_irqrestore(&tp->rx_lock, flags);
+
+ list_for_each_safe(cursor, next, &rx_queue) {
struct rx_desc *rx_desc;
struct rx_agg *agg;
int len_used = 0;
@@ -1366,7 +1386,6 @@ static void rx_bottom(struct r8152 *tp)
int ret;
list_del_init(cursor);
- spin_unlock_irqrestore(&tp->rx_lock, flags);
agg = list_entry(cursor, struct rx_agg, list);
urb = agg->urb;
@@ -1416,13 +1435,13 @@ static void rx_bottom(struct r8152 *tp)
submit:
ret = r8152_submit_rx(tp, agg, GFP_ATOMIC);
- spin_lock_irqsave(&tp->rx_lock, flags);
if (ret && ret != -ENODEV) {
- list_add_tail(&agg->list, next);
+ spin_lock_irqsave(&tp->rx_lock, flags);
+ list_add_tail(&agg->list, &tp->rx_done);
+ spin_unlock_irqrestore(&tp->rx_lock, flags);
tasklet_schedule(&tp->tl);
}
}
- spin_unlock_irqrestore(&tp->rx_lock, flags);
}
static void tx_bottom(struct r8152 *tp)
@@ -1496,9 +1515,19 @@ int r8152_submit_rx(struct r8152 *tp, struct rx_agg *agg, gfp_t mem_flags)
static void rtl_drop_queued_tx(struct r8152 *tp)
{
struct net_device_stats *stats = &tp->netdev->stats;
+ struct sk_buff_head skb_head, *tx_queue = &tp->tx_queue;
+ unsigned long flags;
struct sk_buff *skb;
- while ((skb = skb_dequeue(&tp->tx_queue))) {
+ if (skb_queue_empty(tx_queue))
+ return;
+
+ __skb_queue_head_init(&skb_head);
+ spin_lock_irqsave(&tx_queue->lock, flags);
+ skb_queue_splice_init(tx_queue, &skb_head);
+ spin_unlock_irqrestore(&tx_queue->lock, flags);
+
+ while ((skb = __skb_dequeue(&skb_head))) {
dev_kfree_skb(skb);
stats->tx_dropped++;
}
--
1.8.4.2
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH net-next 06/14] r8152: clear BMCR_PDOWN
2014-02-18 13:48 [PATCH net-next 00/14] r8152: improvement and new features Hayes Wang
` (4 preceding siblings ...)
2014-02-18 13:49 ` [PATCH net-next 05/14] r8152: reduce the frequency of spin_lock Hayes Wang
@ 2014-02-18 13:49 ` Hayes Wang
2014-02-18 13:49 ` [PATCH net-next 07/14] r8152: combine PHY reset with set_speed Hayes Wang
` (8 subsequent siblings)
14 siblings, 0 replies; 22+ messages in thread
From: Hayes Wang @ 2014-02-18 13:49 UTC (permalink / raw)
To: netdev; +Cc: nic_swsd, linux-kernel, linux-usb, Hayes Wang
Modify the method of enabling the PHY to clear BMCR_PDOWN only.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
drivers/net/usb/r8152.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 2a778fa..c7bae39 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1845,7 +1845,14 @@ static inline void r8152b_enable_aldps(struct r8152 *tp)
static void r8152b_hw_phy_cfg(struct r8152 *tp)
{
- r8152_mdio_write(tp, MII_BMCR, BMCR_ANENABLE);
+ u16 data;
+
+ data = r8152_mdio_read(tp, MII_BMCR);
+ if (data & BMCR_PDOWN) {
+ data &= ~BMCR_PDOWN;
+ r8152_mdio_write(tp, MII_BMCR, data);
+ }
+
r8152b_disable_aldps(tp);
}
@@ -1995,7 +2002,11 @@ static void r8153_hw_phy_cfg(struct r8152 *tp)
u16 data;
ocp_reg_write(tp, OCP_ADC_CFG, CKADSEL_L | ADC_EN | EN_EMI_L);
- r8152_mdio_write(tp, MII_BMCR, BMCR_ANENABLE);
+ data = r8152_mdio_read(tp, MII_BMCR);
+ if (data & BMCR_PDOWN) {
+ data &= ~BMCR_PDOWN;
+ r8152_mdio_write(tp, MII_BMCR, data);
+ }
if (tp->version == RTL_VER_03) {
data = ocp_reg_read(tp, OCP_EEE_CFG);
--
1.8.4.2
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH net-next 07/14] r8152: combine PHY reset with set_speed
2014-02-18 13:48 [PATCH net-next 00/14] r8152: improvement and new features Hayes Wang
` (5 preceding siblings ...)
2014-02-18 13:49 ` [PATCH net-next 06/14] r8152: clear BMCR_PDOWN Hayes Wang
@ 2014-02-18 13:49 ` Hayes Wang
[not found] ` <1392731351-25502-8-git-send-email-hayeswang-Rasf1IRRPZFBDgjK7y7TUQ@public.gmane.org>
[not found] ` <201402190209.s1J29EVG032292@rtits1.realtek.com>
2014-02-18 13:49 ` [PATCH net-next 08/14] r8152: move some functions from probe to open Hayes Wang
` (7 subsequent siblings)
14 siblings, 2 replies; 22+ messages in thread
From: Hayes Wang @ 2014-02-18 13:49 UTC (permalink / raw)
To: netdev; +Cc: nic_swsd, linux-kernel, linux-usb, Hayes Wang
PHY reset is necessary after some hw settings. However, it would
cause the linking down, and so does the set_speed function. Combine
the PHY reset with set_speed function. That could reduce the frequency
of linking down and accessing the PHY register.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
drivers/net/usb/r8152.c | 57 ++++++++++++++++++++++++++++++++++++++-----------
1 file changed, 45 insertions(+), 12 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index c7bae39..b3155da 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -436,6 +436,7 @@ enum rtl8152_flags {
RTL8152_SET_RX_MODE,
WORK_ENABLE,
RTL8152_LINK_CHG,
+ PHY_RESET,
};
/* Define these values to match your device */
@@ -1796,6 +1797,29 @@ static void r8152_power_cut_en(struct r8152 *tp, bool enable)
}
+static void rtl_phy_reset(struct r8152 *tp)
+{
+ u16 data;
+ int i;
+
+ clear_bit(PHY_RESET, &tp->flags);
+
+ data = r8152_mdio_read(tp, MII_BMCR);
+
+ /* don't reset again before the previous one complete */
+ if (data & BMCR_RESET)
+ return;
+
+ data |= BMCR_RESET;
+ r8152_mdio_write(tp, MII_BMCR, data);
+
+ for (i = 0; i < 50; i++) {
+ msleep(20);
+ if ((r8152_mdio_read(tp, MII_BMCR) & BMCR_RESET) == 0)
+ break;
+ }
+}
+
static void rtl_clear_bp(struct r8152 *tp)
{
ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_0, 0);
@@ -1854,6 +1878,7 @@ static void r8152b_hw_phy_cfg(struct r8152 *tp)
}
r8152b_disable_aldps(tp);
+ set_bit(PHY_RESET, &tp->flags);
}
static void r8152b_exit_oob(struct r8152 *tp)
@@ -2042,6 +2067,8 @@ static void r8153_hw_phy_cfg(struct r8152 *tp)
data = sram_read(tp, SRAM_10M_AMP2);
data |= AMP_DN;
sram_write(tp, SRAM_10M_AMP2, data);
+
+ set_bit(PHY_RESET, &tp->flags);
}
static void r8153_u1u2en(struct r8152 *tp, bool enable)
@@ -2295,12 +2322,26 @@ static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex)
bmcr = BMCR_ANENABLE | BMCR_ANRESTART;
}
+ if (test_bit(PHY_RESET, &tp->flags))
+ bmcr |= BMCR_RESET;
+
if (tp->mii.supports_gmii)
r8152_mdio_write(tp, MII_CTRL1000, gbcr);
r8152_mdio_write(tp, MII_ADVERTISE, anar);
r8152_mdio_write(tp, MII_BMCR, bmcr);
+ if (test_bit(PHY_RESET, &tp->flags)) {
+ int i;
+
+ clear_bit(PHY_RESET, &tp->flags);
+ for (i = 0; i < 50; i++) {
+ msleep(20);
+ if ((r8152_mdio_read(tp, MII_BMCR) & BMCR_RESET) == 0)
+ break;
+ }
+ }
+
out:
return ret;
@@ -2364,6 +2405,10 @@ static void rtl_work_func_t(struct work_struct *work)
if (test_bit(RTL8152_SET_RX_MODE, &tp->flags))
_rtl8152_set_rx_mode(tp->netdev);
+
+ if (test_bit(PHY_RESET, &tp->flags))
+ rtl_phy_reset(tp);
+
out1:
return;
}
@@ -2459,7 +2504,6 @@ static void r8152b_enable_fc(struct r8152 *tp)
static void r8152b_init(struct r8152 *tp)
{
u32 ocp_data;
- int i;
rtl_clear_bp(tp);
@@ -2491,14 +2535,6 @@ static void r8152b_init(struct r8152 *tp)
r8152b_enable_aldps(tp);
r8152b_enable_fc(tp);
- r8152_mdio_write(tp, MII_BMCR, BMCR_RESET | BMCR_ANENABLE |
- BMCR_ANRESTART);
- for (i = 0; i < 100; i++) {
- udelay(100);
- if (!(r8152_mdio_read(tp, MII_BMCR) & BMCR_RESET))
- break;
- }
-
/* enable rx aggregation */
ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
ocp_data &= ~RX_AGG_DISABLE;
@@ -2569,9 +2605,6 @@ static void r8153_init(struct r8152 *tp)
r8153_enable_eee(tp);
r8153_enable_aldps(tp);
r8152b_enable_fc(tp);
-
- r8152_mdio_write(tp, MII_BMCR, BMCR_RESET | BMCR_ANENABLE |
- BMCR_ANRESTART);
}
static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message)
--
1.8.4.2
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH net-next 08/14] r8152: move some functions from probe to open
2014-02-18 13:48 [PATCH net-next 00/14] r8152: improvement and new features Hayes Wang
` (6 preceding siblings ...)
2014-02-18 13:49 ` [PATCH net-next 07/14] r8152: combine PHY reset with set_speed Hayes Wang
@ 2014-02-18 13:49 ` Hayes Wang
2014-02-18 13:49 ` [PATCH net-next 09/14] r8152: support WOL Hayes Wang
` (6 subsequent siblings)
14 siblings, 0 replies; 22+ messages in thread
From: Hayes Wang @ 2014-02-18 13:49 UTC (permalink / raw)
To: netdev; +Cc: nic_swsd, linux-kernel, linux-usb, Hayes Wang
Add up method for rtl_ops and asign relative functions. Move
clear_bp() and hw_phy_cfg() from init method to up method of rtl_ops.
Call rtl_ops.up() for ndo_open() and rtl_ops.down for ndo_stop().
Replace allocating the memory in probe() with in ndo_open().
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
drivers/net/usb/r8152.c | 45 +++++++++++++++++++++++++--------------------
1 file changed, 25 insertions(+), 20 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index b3155da..828572a 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -515,6 +515,7 @@ struct r8152 {
void (*init)(struct r8152 *);
int (*enable)(struct r8152 *);
void (*disable)(struct r8152 *);
+ void (*up)(struct r8152 *);
void (*down)(struct r8152 *);
void (*unload)(struct r8152 *);
} rtl_ops;
@@ -1878,6 +1879,10 @@ static void r8152b_hw_phy_cfg(struct r8152 *tp)
}
r8152b_disable_aldps(tp);
+
+ rtl_clear_bp(tp);
+
+ r8152b_enable_aldps(tp);
set_bit(PHY_RESET, &tp->flags);
}
@@ -1891,6 +1896,7 @@ static void r8152b_exit_oob(struct r8152 *tp)
ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
rxdy_gated_en(tp, true);
+ r8152b_hw_phy_cfg(tp);
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, 0x00);
@@ -2033,6 +2039,8 @@ static void r8153_hw_phy_cfg(struct r8152 *tp)
r8152_mdio_write(tp, MII_BMCR, data);
}
+ r8153_clear_bp(tp);
+
if (tp->version == RTL_VER_03) {
data = ocp_reg_read(tp, OCP_EEE_CFG);
data &= ~CTAP_SHORT_EN;
@@ -2418,6 +2426,12 @@ static int rtl8152_open(struct net_device *netdev)
struct r8152 *tp = netdev_priv(netdev);
int res = 0;
+ res = alloc_all_mem(tp);
+ if (res)
+ goto out;
+
+ tp->rtl_ops.up(tp);
+
rtl8152_set_speed(tp, AUTONEG_ENABLE,
tp->mii.supports_gmii ? SPEED_1000 : SPEED_100,
DUPLEX_FULL);
@@ -2431,9 +2445,11 @@ static int rtl8152_open(struct net_device *netdev)
netif_device_detach(tp->netdev);
netif_warn(tp, ifup, netdev, "intr_urb submit failed: %d\n",
res);
+ free_all_mem(tp);
}
+out:
return res;
}
@@ -2447,9 +2463,11 @@ static int rtl8152_close(struct net_device *netdev)
cancel_delayed_work_sync(&tp->schedule);
netif_stop_queue(netdev);
tasklet_disable(&tp->tl);
- tp->rtl_ops.disable(tp);
+ tp->rtl_ops.down(tp);
tasklet_enable(&tp->tl);
+ free_all_mem(tp);
+
return res;
}
@@ -2505,21 +2523,14 @@ static void r8152b_init(struct r8152 *tp)
{
u32 ocp_data;
- rtl_clear_bp(tp);
-
if (tp->version == RTL_VER_01) {
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE);
ocp_data &= ~LED_MODE_MASK;
ocp_write_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE, ocp_data);
}
- r8152b_hw_phy_cfg(tp);
-
r8152_power_cut_en(tp, false);
-
- r8152b_exit_oob(tp);
-
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
ocp_data |= TX_10M_IDLE_EN | PFM_PWM_SWITCH;
ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
@@ -2568,8 +2579,6 @@ static void r8153_init(struct r8152 *tp)
ocp_data &= ~TIMER11_EN;
ocp_write_word(tp, MCU_TYPE_USB, USB_WDT11_CTRL, ocp_data);
- r8153_clear_bp(tp);
-
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE);
ocp_data &= ~LED_MODE_MASK;
ocp_write_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE, ocp_data);
@@ -2590,8 +2599,6 @@ static void r8153_init(struct r8152 *tp)
r8153_power_cut_en(tp, false);
r8153_u1u2en(tp, true);
- r8153_first_init(tp);
-
ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, ALDPS_SPDWN_RATIO);
ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, EEE_SPDWN_RATIO);
ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3,
@@ -2618,10 +2625,10 @@ static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message)
usb_kill_urb(tp->intr_urb);
cancel_delayed_work_sync(&tp->schedule);
tasklet_disable(&tp->tl);
+ tp->rtl_ops.down(tp);
+ tasklet_enable(&tp->tl);
}
- tp->rtl_ops.down(tp);
-
return 0;
}
@@ -2632,6 +2639,7 @@ static int rtl8152_resume(struct usb_interface *intf)
tp->rtl_ops.init(tp);
netif_device_attach(tp->netdev);
if (netif_running(tp->netdev)) {
+ tp->rtl_ops.up(tp);
rtl8152_set_speed(tp, AUTONEG_ENABLE,
tp->mii.supports_gmii ? SPEED_1000 : SPEED_100,
DUPLEX_FULL);
@@ -2639,7 +2647,6 @@ static int rtl8152_resume(struct usb_interface *intf)
netif_carrier_off(tp->netdev);
set_bit(WORK_ENABLE, &tp->flags);
usb_submit_urb(tp->intr_urb, GFP_KERNEL);
- tasklet_enable(&tp->tl);
}
return 0;
@@ -2780,6 +2787,7 @@ static int rtl_ops_init(struct r8152 *tp, const struct usb_device_id *id)
ops->init = r8152b_init;
ops->enable = rtl8152_enable;
ops->disable = rtl8152_disable;
+ ops->up = r8152b_exit_oob;
ops->down = rtl8152_down;
ops->unload = rtl8152_unload;
ret = 0;
@@ -2788,6 +2796,7 @@ static int rtl_ops_init(struct r8152 *tp, const struct usb_device_id *id)
ops->init = r8153_init;
ops->enable = rtl8153_enable;
ops->disable = rtl8152_disable;
+ ops->up = r8153_first_init;
ops->down = rtl8153_down;
ops->unload = rtl8153_unload;
ret = 0;
@@ -2803,6 +2812,7 @@ static int rtl_ops_init(struct r8152 *tp, const struct usb_device_id *id)
ops->init = r8153_init;
ops->enable = rtl8153_enable;
ops->disable = rtl8152_disable;
+ ops->up = r8153_first_init;
ops->down = rtl8153_down;
ops->unload = rtl8153_unload;
ret = 0;
@@ -2870,10 +2880,6 @@ static int rtl8152_probe(struct usb_interface *intf,
tp->rtl_ops.init(tp);
set_ethernet_addr(tp);
- ret = alloc_all_mem(tp);
- if (ret)
- goto out;
-
usb_set_intfdata(intf, tp);
ret = register_netdev(netdev);
@@ -2903,7 +2909,6 @@ static void rtl8152_disconnect(struct usb_interface *intf)
tasklet_kill(&tp->tl);
unregister_netdev(tp->netdev);
tp->rtl_ops.unload(tp);
- free_all_mem(tp);
free_netdev(tp->netdev);
}
}
--
1.8.4.2
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH net-next 09/14] r8152: support WOL
2014-02-18 13:48 [PATCH net-next 00/14] r8152: improvement and new features Hayes Wang
` (7 preceding siblings ...)
2014-02-18 13:49 ` [PATCH net-next 08/14] r8152: move some functions from probe to open Hayes Wang
@ 2014-02-18 13:49 ` Hayes Wang
2014-02-18 13:49 ` [PATCH net-next 10/14] r8152: support runtime suspend Hayes Wang
` (5 subsequent siblings)
14 siblings, 0 replies; 22+ messages in thread
From: Hayes Wang @ 2014-02-18 13:49 UTC (permalink / raw)
To: netdev; +Cc: nic_swsd, linux-kernel, linux-usb, Hayes Wang
Support WOL for RTL8152 and RTL8153.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
drivers/net/usb/r8152.c | 118 ++++++++++++++++++++++++++++++++++++++++++------
1 file changed, 105 insertions(+), 13 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 828572a..5d520be 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -23,7 +23,7 @@
#include <linux/ipv6.h>
/* Version Information */
-#define DRIVER_VERSION "v1.04.0 (2014/01/15)"
+#define DRIVER_VERSION "v1.05.0 (2014/02/18)"
#define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd@realtek.com>"
#define DRIVER_DESC "Realtek RTL8152/RTL8153 Based USB Ethernet Adapters"
#define MODULENAME "r8152"
@@ -62,6 +62,8 @@
#define PLA_RSTTELLY 0xe800
#define PLA_CR 0xe813
#define PLA_CRWECR 0xe81c
+#define PLA_CONFIG12 0xe81e /* CONFIG1, CONFIG2 */
+#define PLA_CONFIG34 0xe820 /* CONFIG3, CONFIG4 */
#define PLA_CONFIG5 0xe822
#define PLA_PHY_PWR 0xe84c
#define PLA_OOB_CTRL 0xe84f
@@ -216,7 +218,14 @@
/* PAL_BDC_CR */
#define ALDPS_PROXY_MODE 0x0001
+/* PLA_CONFIG34 */
+#define LINK_ON_WAKE_EN 0x0010
+#define LINK_OFF_WAKE_EN 0x0008
+
/* PLA_CONFIG5 */
+#define BWF_EN 0x0040
+#define MWF_EN 0x0020
+#define UWF_EN 0x0010
#define LAN_WAKE_EN 0x0002
/* PLA_LED_FEATURE */
@@ -521,6 +530,7 @@ struct r8152 {
} rtl_ops;
int intr_interval;
+ u32 saved_wolopts;
u32 msg_enable;
u32 tx_qlen;
u16 ocp_base;
@@ -1798,6 +1808,74 @@ static void r8152_power_cut_en(struct r8152 *tp, bool enable)
}
+#define WAKE_ANY (WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_BCAST | WAKE_MCAST)
+
+static u32 __rtl_get_wol(struct r8152 *tp)
+{
+ u32 ocp_data;
+ u32 wolopts = 0;
+
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CONFIG5);
+ if (!(ocp_data & LAN_WAKE_EN))
+ return 0;
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
+ if (ocp_data & LINK_ON_WAKE_EN)
+ wolopts |= WAKE_PHY;
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG5);
+ if (ocp_data & UWF_EN)
+ wolopts |= WAKE_UCAST;
+ if (ocp_data & BWF_EN)
+ wolopts |= WAKE_BCAST;
+ if (ocp_data & MWF_EN)
+ wolopts |= WAKE_MCAST;
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL);
+ if (ocp_data & MAGIC_EN)
+ wolopts |= WAKE_MAGIC;
+
+ return wolopts;
+}
+
+static void __rtl_set_wol(struct r8152 *tp, u32 wolopts)
+{
+ u32 ocp_data;
+
+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
+ ocp_data &= ~LINK_ON_WAKE_EN;
+ if (wolopts & WAKE_PHY)
+ ocp_data |= LINK_ON_WAKE_EN;
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG5);
+ ocp_data &= ~(UWF_EN | BWF_EN | MWF_EN | LAN_WAKE_EN);
+ if (wolopts & WAKE_UCAST)
+ ocp_data |= UWF_EN;
+ if (wolopts & WAKE_BCAST)
+ ocp_data |= BWF_EN;
+ if (wolopts & WAKE_MCAST)
+ ocp_data |= MWF_EN;
+ if (wolopts & WAKE_ANY)
+ ocp_data |= LAN_WAKE_EN;
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG5, ocp_data);
+
+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL);
+ ocp_data &= ~MAGIC_EN;
+ if (wolopts & WAKE_MAGIC)
+ ocp_data |= MAGIC_EN;
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL, ocp_data);
+
+ if (wolopts & WAKE_ANY)
+ device_set_wakeup_enable(&tp->udev->dev, true);
+ else
+ device_set_wakeup_enable(&tp->udev->dev, false);
+}
+
static void rtl_phy_reset(struct r8152 *tp)
{
u16 data;
@@ -2002,10 +2080,6 @@ static void r8152b_enter_oob(struct r8152 *tp)
ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL);
- ocp_data |= MAGIC_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL, ocp_data);
-
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR);
ocp_data |= CPCR_RX_VLAN;
ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data);
@@ -2018,8 +2092,6 @@ static void r8152b_enter_oob(struct r8152 *tp)
ocp_data |= NOW_IS_OOB | DIS_MCU_CLROOB;
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG5, LAN_WAKE_EN);
-
rxdy_gated_en(tp, false);
ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
@@ -2217,10 +2289,6 @@ static void r8153_enter_oob(struct r8152 *tp)
ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL);
- ocp_data |= MAGIC_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL, ocp_data);
-
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG);
ocp_data &= ~TEREDO_WAKE_MASK;
ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, ocp_data);
@@ -2237,8 +2305,6 @@ static void r8153_enter_oob(struct r8152 *tp)
ocp_data |= NOW_IS_OOB | DIS_MCU_CLROOB;
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG5, LAN_WAKE_EN);
-
rxdy_gated_en(tp, false);
ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
@@ -2652,6 +2718,24 @@ static int rtl8152_resume(struct usb_interface *intf)
return 0;
}
+static void rtl8152_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct r8152 *tp = netdev_priv(dev);
+
+ wol->supported = WAKE_ANY;
+ wol->wolopts = __rtl_get_wol(tp);
+}
+
+static int rtl8152_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct r8152 *tp = netdev_priv(dev);
+
+ __rtl_set_wol(tp, wol->wolopts);
+ tp->saved_wolopts = wol->wolopts & WAKE_ANY;
+
+ return 0;
+}
+
static void rtl8152_get_drvinfo(struct net_device *netdev,
struct ethtool_drvinfo *info)
{
@@ -2685,6 +2769,8 @@ static struct ethtool_ops ops = {
.get_settings = rtl8152_get_settings,
.set_settings = rtl8152_set_settings,
.get_link = ethtool_op_get_link,
+ .get_wol = rtl8152_get_wol,
+ .set_wol = rtl8152_set_wol,
};
static int rtl8152_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
@@ -2888,6 +2974,12 @@ static int rtl8152_probe(struct usb_interface *intf,
goto out1;
}
+ tp->saved_wolopts = __rtl_get_wol(tp);
+ if (tp->saved_wolopts)
+ device_set_wakeup_enable(&udev->dev, true);
+ else
+ device_set_wakeup_enable(&udev->dev, false);
+
netif_info(tp, probe, netdev, "%s\n", DRIVER_VERSION);
return 0;
--
1.8.4.2
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH net-next 10/14] r8152: support runtime suspend
2014-02-18 13:48 [PATCH net-next 00/14] r8152: improvement and new features Hayes Wang
` (8 preceding siblings ...)
2014-02-18 13:49 ` [PATCH net-next 09/14] r8152: support WOL Hayes Wang
@ 2014-02-18 13:49 ` Hayes Wang
2014-02-18 13:49 ` [PATCH net-next 11/14] r8152: disable teredo for RTL8152 Hayes Wang
` (4 subsequent siblings)
14 siblings, 0 replies; 22+ messages in thread
From: Hayes Wang @ 2014-02-18 13:49 UTC (permalink / raw)
To: netdev; +Cc: nic_swsd, linux-kernel, linux-usb, Hayes Wang
Support runtime suspend for RTL8152 and RTL8153.
Move tx_bottom() from tasklet to delayed_work. That avoids to
transmit tx packets after calling autosuspend.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
drivers/net/usb/r8152.c | 181 ++++++++++++++++++++++++++++++++++++++++++------
1 file changed, 158 insertions(+), 23 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 5d520be..f303549 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -445,6 +445,7 @@ enum rtl8152_flags {
RTL8152_SET_RX_MODE,
WORK_ENABLE,
RTL8152_LINK_CHG,
+ SELECTIVE_SUSPEND,
PHY_RESET,
};
@@ -877,11 +878,21 @@ static u16 sram_read(struct r8152 *tp, u16 addr)
static int read_mii_word(struct net_device *netdev, int phy_id, int reg)
{
struct r8152 *tp = netdev_priv(netdev);
+ int ret;
if (phy_id != R8152_PHY_ID)
return -EINVAL;
- return r8152_mdio_read(tp, reg);
+ ret = usb_autopm_get_interface(tp->intf);
+ if (ret < 0)
+ goto out;
+
+ ret = r8152_mdio_read(tp, reg);
+
+ usb_autopm_put_interface(tp->intf);
+
+out:
+ return ret;
}
static
@@ -892,7 +903,12 @@ void write_mii_word(struct net_device *netdev, int phy_id, int reg, int val)
if (phy_id != R8152_PHY_ID)
return;
+ if (usb_autopm_get_interface(tp->intf) < 0)
+ return;
+
r8152_mdio_write(tp, reg, val);
+
+ usb_autopm_put_interface(tp->intf);
}
static
@@ -978,6 +994,8 @@ static void read_bulk_callback(struct urb *urb)
if (!netif_carrier_ok(netdev))
return;
+ usb_mark_last_busy(tp->udev);
+
switch (status) {
case 0:
if (urb->actual_length < ETH_ZLEN)
@@ -1045,6 +1063,8 @@ static void write_bulk_callback(struct urb *urb)
list_add_tail(&agg->list, &tp->tx_free);
spin_unlock_irqrestore(&tp->tx_lock, flags);
+ usb_autopm_put_interface_async(tp->intf);
+
if (!netif_carrier_ok(tp->netdev))
return;
@@ -1055,7 +1075,7 @@ static void write_bulk_callback(struct urb *urb)
return;
if (!skb_queue_empty(&tp->tx_queue))
- tasklet_schedule(&tp->tl);
+ schedule_delayed_work(&tp->schedule, 0);
}
static void intr_callback(struct urb *urb)
@@ -1313,7 +1333,7 @@ static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
{
struct sk_buff_head skb_head, *tx_queue = &tp->tx_queue;
unsigned long flags;
- int remain;
+ int remain, ret;
u8 *tx_data;
__skb_queue_head_init(&skb_head);
@@ -1361,19 +1381,28 @@ static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
spin_unlock_irqrestore(&tx_queue->lock, flags);
}
- netif_tx_lock(tp->netdev);
+ netif_tx_lock_bh(tp->netdev);
if (netif_queue_stopped(tp->netdev) &&
skb_queue_len(&tp->tx_queue) < tp->tx_qlen)
netif_wake_queue(tp->netdev);
- netif_tx_unlock(tp->netdev);
+ netif_tx_unlock_bh(tp->netdev);
+
+ ret = usb_autopm_get_interface(tp->intf);
+ if (ret < 0)
+ goto out_tx_fill;
usb_fill_bulk_urb(agg->urb, tp->udev, usb_sndbulkpipe(tp->udev, 2),
agg->head, (int)(tx_data - (u8 *)agg->head),
(usb_complete_t)write_bulk_callback, agg);
- return usb_submit_urb(agg->urb, GFP_ATOMIC);
+ ret = usb_submit_urb(agg->urb, GFP_KERNEL);
+ if (ret < 0)
+ usb_autopm_put_interface(tp->intf);
+
+out_tx_fill:
+ return ret;
}
static void rx_bottom(struct r8152 *tp)
@@ -1511,7 +1540,6 @@ static void bottom_half(unsigned long data)
return;
rx_bottom(tp);
- tx_bottom(tp);
}
static
@@ -1621,7 +1649,7 @@ static netdev_tx_t rtl8152_start_xmit(struct sk_buff *skb,
netif_stop_queue(netdev);
if (!list_empty(&tp->tx_free))
- tasklet_schedule(&tp->tl);
+ schedule_delayed_work(&tp->schedule, 0);
return NETDEV_TX_OK;
}
@@ -1876,6 +1904,25 @@ static void __rtl_set_wol(struct r8152 *tp, u32 wolopts)
device_set_wakeup_enable(&tp->udev->dev, false);
}
+static void rtl_runtime_suspend_enable(struct r8152 *tp, bool enable)
+{
+ if (enable) {
+ u32 ocp_data;
+
+ __rtl_set_wol(tp, WAKE_ANY);
+
+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
+ ocp_data |= LINK_OFF_WAKE_EN;
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data);
+
+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
+ } else {
+ __rtl_set_wol(tp, tp->saved_wolopts);
+ }
+}
+
static void rtl_phy_reset(struct r8152 *tp)
{
u16 data;
@@ -2467,6 +2514,9 @@ static void rtl_work_func_t(struct work_struct *work)
{
struct r8152 *tp = container_of(work, struct r8152, schedule.work);
+ if (usb_autopm_get_interface(tp->intf) < 0)
+ return;
+
if (!test_bit(WORK_ENABLE, &tp->flags))
goto out1;
@@ -2479,12 +2529,14 @@ static void rtl_work_func_t(struct work_struct *work)
if (test_bit(RTL8152_SET_RX_MODE, &tp->flags))
_rtl8152_set_rx_mode(tp->netdev);
+ if (tp->speed & LINK_STATUS)
+ tx_bottom(tp);
if (test_bit(PHY_RESET, &tp->flags))
rtl_phy_reset(tp);
out1:
- return;
+ usb_autopm_put_interface(tp->intf);
}
static int rtl8152_open(struct net_device *netdev)
@@ -2496,6 +2548,21 @@ static int rtl8152_open(struct net_device *netdev)
if (res)
goto out;
+ res = usb_autopm_get_interface(tp->intf);
+ if (res < 0) {
+ free_all_mem(tp);
+ goto out;
+ }
+
+ /* The WORK_ENABLE may be set when autoresume occurs */
+ if (test_bit(WORK_ENABLE, &tp->flags)) {
+ clear_bit(WORK_ENABLE, &tp->flags);
+ usb_kill_urb(tp->intr_urb);
+ cancel_delayed_work_sync(&tp->schedule);
+ if (tp->speed & LINK_STATUS)
+ tp->rtl_ops.disable(tp);
+ }
+
tp->rtl_ops.up(tp);
rtl8152_set_speed(tp, AUTONEG_ENABLE,
@@ -2514,6 +2581,7 @@ static int rtl8152_open(struct net_device *netdev)
free_all_mem(tp);
}
+ usb_autopm_put_interface(tp->intf);
out:
return res;
@@ -2528,9 +2596,26 @@ static int rtl8152_close(struct net_device *netdev)
usb_kill_urb(tp->intr_urb);
cancel_delayed_work_sync(&tp->schedule);
netif_stop_queue(netdev);
- tasklet_disable(&tp->tl);
- tp->rtl_ops.down(tp);
- tasklet_enable(&tp->tl);
+
+ res = usb_autopm_get_interface(tp->intf);
+ if (res < 0) {
+ rtl_drop_queued_tx(tp);
+ } else {
+ /*
+ * The autosuspend may have been enabled and wouldn't
+ * be disable when autoresume occurs, because the
+ * netif_running() would be false.
+ */
+ if (test_bit(SELECTIVE_SUSPEND, &tp->flags)) {
+ rtl_runtime_suspend_enable(tp, false);
+ clear_bit(SELECTIVE_SUSPEND, &tp->flags);
+ }
+
+ tasklet_disable(&tp->tl);
+ tp->rtl_ops.down(tp);
+ tasklet_enable(&tp->tl);
+ usb_autopm_put_interface(tp->intf);
+ }
free_all_mem(tp);
@@ -2684,15 +2769,22 @@ static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message)
{
struct r8152 *tp = usb_get_intfdata(intf);
- netif_device_detach(tp->netdev);
+ if (PMSG_IS_AUTO(message))
+ set_bit(SELECTIVE_SUSPEND, &tp->flags);
+ else
+ netif_device_detach(tp->netdev);
if (netif_running(tp->netdev)) {
clear_bit(WORK_ENABLE, &tp->flags);
usb_kill_urb(tp->intr_urb);
cancel_delayed_work_sync(&tp->schedule);
- tasklet_disable(&tp->tl);
- tp->rtl_ops.down(tp);
- tasklet_enable(&tp->tl);
+ if (test_bit(SELECTIVE_SUSPEND, &tp->flags)) {
+ rtl_runtime_suspend_enable(tp, true);
+ } else {
+ tasklet_disable(&tp->tl);
+ tp->rtl_ops.down(tp);
+ tasklet_enable(&tp->tl);
+ }
}
return 0;
@@ -2702,13 +2794,23 @@ static int rtl8152_resume(struct usb_interface *intf)
{
struct r8152 *tp = usb_get_intfdata(intf);
- tp->rtl_ops.init(tp);
- netif_device_attach(tp->netdev);
+ if (!test_bit(SELECTIVE_SUSPEND, &tp->flags)) {
+ tp->rtl_ops.init(tp);
+ netif_device_attach(tp->netdev);
+ }
+
if (netif_running(tp->netdev)) {
- tp->rtl_ops.up(tp);
- rtl8152_set_speed(tp, AUTONEG_ENABLE,
+ if (test_bit(SELECTIVE_SUSPEND, &tp->flags)) {
+ rtl_runtime_suspend_enable(tp, false);
+ clear_bit(SELECTIVE_SUSPEND, &tp->flags);
+ if (tp->speed & LINK_STATUS)
+ tp->rtl_ops.disable(tp);
+ } else {
+ tp->rtl_ops.up(tp);
+ rtl8152_set_speed(tp, AUTONEG_ENABLE,
tp->mii.supports_gmii ? SPEED_1000 : SPEED_100,
DUPLEX_FULL);
+ }
tp->speed = 0;
netif_carrier_off(tp->netdev);
set_bit(WORK_ENABLE, &tp->flags);
@@ -2722,18 +2824,31 @@ static void rtl8152_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
struct r8152 *tp = netdev_priv(dev);
+ if (usb_autopm_get_interface(tp->intf) < 0)
+ return;
+
wol->supported = WAKE_ANY;
wol->wolopts = __rtl_get_wol(tp);
+
+ usb_autopm_put_interface(tp->intf);
}
static int rtl8152_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
struct r8152 *tp = netdev_priv(dev);
+ int ret;
+
+ ret = usb_autopm_get_interface(tp->intf);
+ if (ret < 0)
+ goto out_set_wol;
__rtl_set_wol(tp, wol->wolopts);
tp->saved_wolopts = wol->wolopts & WAKE_ANY;
- return 0;
+ usb_autopm_put_interface(tp->intf);
+
+out_set_wol:
+ return ret;
}
static void rtl8152_get_drvinfo(struct net_device *netdev,
@@ -2760,8 +2875,18 @@ int rtl8152_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
static int rtl8152_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct r8152 *tp = netdev_priv(dev);
+ int ret;
+
+ ret = usb_autopm_get_interface(tp->intf);
+ if (ret < 0)
+ goto out;
- return rtl8152_set_speed(tp, cmd->autoneg, cmd->speed, cmd->duplex);
+ ret = rtl8152_set_speed(tp, cmd->autoneg, cmd->speed, cmd->duplex);
+
+ usb_autopm_put_interface(tp->intf);
+
+out:
+ return ret;
}
static struct ethtool_ops ops = {
@@ -2777,7 +2902,11 @@ static int rtl8152_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
{
struct r8152 *tp = netdev_priv(netdev);
struct mii_ioctl_data *data = if_mii(rq);
- int res = 0;
+ int res;
+
+ res = usb_autopm_get_interface(tp->intf);
+ if (res < 0)
+ goto out;
switch (cmd) {
case SIOCGMIIPHY:
@@ -2800,6 +2929,9 @@ static int rtl8152_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
res = -EOPNOTSUPP;
}
+ usb_autopm_put_interface(tp->intf);
+
+out:
return res;
}
@@ -2962,6 +3094,8 @@ static int rtl8152_probe(struct usb_interface *intf,
tp->mii.phy_id = R8152_PHY_ID;
tp->mii.supports_gmii = 0;
+ intf->needs_remote_wakeup = 1;
+
r8152b_get_version(tp);
tp->rtl_ops.init(tp);
set_ethernet_addr(tp);
@@ -3023,6 +3157,7 @@ static struct usb_driver rtl8152_driver = {
.suspend = rtl8152_suspend,
.resume = rtl8152_resume,
.reset_resume = rtl8152_resume,
+ .supports_autosuspend = 1,
};
module_usb_driver(rtl8152_driver);
--
1.8.4.2
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH net-next 11/14] r8152: disable teredo for RTL8152
2014-02-18 13:48 [PATCH net-next 00/14] r8152: improvement and new features Hayes Wang
` (9 preceding siblings ...)
2014-02-18 13:49 ` [PATCH net-next 10/14] r8152: support runtime suspend Hayes Wang
@ 2014-02-18 13:49 ` Hayes Wang
2014-02-18 13:49 ` [PATCH net-next 12/14] r8152: replace netif_rx with netif_receive_skb Hayes Wang
` (3 subsequent siblings)
14 siblings, 0 replies; 22+ messages in thread
From: Hayes Wang @ 2014-02-18 13:49 UTC (permalink / raw)
To: netdev; +Cc: nic_swsd, linux-kernel, linux-usb, Hayes Wang
Disable teredo for RTL8152 by default.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
drivers/net/usb/r8152.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index f303549..3ff11ed 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -2021,6 +2021,7 @@ static void r8152b_exit_oob(struct r8152 *tp)
ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
rxdy_gated_en(tp, true);
+ r8153_teredo_off(tp);
r8152b_hw_phy_cfg(tp);
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
--
1.8.4.2
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH net-next 12/14] r8152: replace netif_rx with netif_receive_skb
2014-02-18 13:48 [PATCH net-next 00/14] r8152: improvement and new features Hayes Wang
` (10 preceding siblings ...)
2014-02-18 13:49 ` [PATCH net-next 11/14] r8152: disable teredo for RTL8152 Hayes Wang
@ 2014-02-18 13:49 ` Hayes Wang
2014-02-18 23:28 ` Francois Romieu
2014-02-18 13:49 ` [PATCH net-next 13/14] r8152: set disable_hub_initiated_lpm Hayes Wang
` (2 subsequent siblings)
14 siblings, 1 reply; 22+ messages in thread
From: Hayes Wang @ 2014-02-18 13:49 UTC (permalink / raw)
To: netdev; +Cc: nic_swsd, linux-kernel, linux-usb, Hayes Wang
Replace netif_rx with netif_receive_skb to avoid disabling irq frequently
for increasing the efficiency.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
drivers/net/usb/r8152.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 3ff11ed..ff02d5d 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1464,7 +1464,7 @@ static void rx_bottom(struct r8152 *tp)
memcpy(skb->data, rx_data, pkt_len);
skb_put(skb, pkt_len);
skb->protocol = eth_type_trans(skb, netdev);
- netif_rx(skb);
+ netif_receive_skb(skb);
stats->rx_packets++;
stats->rx_bytes += pkt_len;
--
1.8.4.2
^ permalink raw reply related [flat|nested] 22+ messages in thread* Re: [PATCH net-next 12/14] r8152: replace netif_rx with netif_receive_skb
2014-02-18 13:49 ` [PATCH net-next 12/14] r8152: replace netif_rx with netif_receive_skb Hayes Wang
@ 2014-02-18 23:28 ` Francois Romieu
2014-02-19 3:01 ` [PATCH net-next 12/14] r8152: replace netif_rx withnetif_receive_skb hayeswang
0 siblings, 1 reply; 22+ messages in thread
From: Francois Romieu @ 2014-02-18 23:28 UTC (permalink / raw)
To: Hayes Wang; +Cc: netdev, nic_swsd, linux-kernel, linux-usb
Hayes Wang <hayeswang@realtek.com> :
> Replace netif_rx with netif_receive_skb to avoid disabling irq frequently
> for increasing the efficiency.
read_bulk_callback is issued in irq context. It could thus use plain
spin_lock / spin_unlock instead of the irq disabling version.
--
Ueimor
^ permalink raw reply [flat|nested] 22+ messages in thread
* RE: [PATCH net-next 12/14] r8152: replace netif_rx withnetif_receive_skb
2014-02-18 23:28 ` Francois Romieu
@ 2014-02-19 3:01 ` hayeswang
2014-02-19 7:46 ` Francois Romieu
0 siblings, 1 reply; 22+ messages in thread
From: hayeswang @ 2014-02-19 3:01 UTC (permalink / raw)
To: 'Francois Romieu'; +Cc: netdev, nic_swsd, linux-kernel, linux-usb
Francois Romieu [mailto:romieu@fr.zoreil.com]
> Sent: Wednesday, February 19, 2014 7:29 AM
> To: Hayes Wang
> Cc: netdev@vger.kernel.org; nic_swsd@realtek.com;
> linux-kernel@vger.kernel.org; linux-usb@vger.kernel.org
> Subject: Re: [PATCH net-next 12/14] r8152: replace netif_rx
> withnetif_receive_skb
>
> Hayes Wang <hayeswang@realtek.com> :
> > Replace netif_rx with netif_receive_skb to avoid disabling irq frequently
> > for increasing the efficiency.
>
> read_bulk_callback is issued in irq context. It could thus use plain
> spin_lock / spin_unlock instead of the irq disabling version.
The rx_bottom() is called in tasklet, so I just think I could use
netif_receive_skb directly. The netif_rx seems to queue the packet,
and local_irq_disable() would be called before dequeuing the skb.
Best Regards,
Hayes
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH net-next 12/14] r8152: replace netif_rx withnetif_receive_skb
2014-02-19 3:01 ` [PATCH net-next 12/14] r8152: replace netif_rx withnetif_receive_skb hayeswang
@ 2014-02-19 7:46 ` Francois Romieu
2014-02-19 12:45 ` [PATCH net-next 12/14] r8152: replace netif_rxwithnetif_receive_skb hayeswang
0 siblings, 1 reply; 22+ messages in thread
From: Francois Romieu @ 2014-02-19 7:46 UTC (permalink / raw)
To: hayeswang; +Cc: netdev, nic_swsd, linux-kernel, linux-usb
hayeswang <hayeswang@realtek.com> :
> Francois Romieu [mailto:romieu@fr.zoreil.com]
> > Hayes Wang <hayeswang@realtek.com> :
> > > Replace netif_rx with netif_receive_skb to avoid disabling irq frequently
> > > for increasing the efficiency.
> >
> > read_bulk_callback is issued in irq context. It could thus use plain
> > spin_lock / spin_unlock instead of the irq disabling version.
>
> The rx_bottom() is called in tasklet, so I just think I could use
> netif_receive_skb directly. The netif_rx seems to queue the packet,
> and local_irq_disable() would be called before dequeuing the skb.
The change in rx_bottom is fine. My point is about read_bulk_callback.
rx_bottom races with read_bulk_callback. rx_bottom is issued in
tasklet (softirq) context. read_bulk_callback is issued in irq
context, with irq disabled. read_bulk_callback does not need to
disable irq itself and could go with spin_lock in place of
spin_lock_irqsave (rx_bottom can't, of course).
--
Ueimor
^ permalink raw reply [flat|nested] 22+ messages in thread
* RE: [PATCH net-next 12/14] r8152: replace netif_rxwithnetif_receive_skb
2014-02-19 7:46 ` Francois Romieu
@ 2014-02-19 12:45 ` hayeswang
0 siblings, 0 replies; 22+ messages in thread
From: hayeswang @ 2014-02-19 12:45 UTC (permalink / raw)
To: 'Francois Romieu'; +Cc: netdev, nic_swsd, linux-kernel, linux-usb
Francois Romieu [mailto:romieu@fr.zoreil.com]
> Sent: Wednesday, February 19, 2014 3:47 PM
> To: hayeswang
> Cc: netdev@vger.kernel.org; nic_swsd@realtek.com;
> linux-kernel@vger.kernel.org; linux-usb@vger.kernel.org
> Subject: Re: [PATCH net-next 12/14] r8152: replace
> netif_rxwithnetif_receive_skb
>
[...]
> The change in rx_bottom is fine. My point is about read_bulk_callback.
>
> rx_bottom races with read_bulk_callback. rx_bottom is issued in
> tasklet (softirq) context. read_bulk_callback is issued in irq
> context, with irq disabled. read_bulk_callback does not need to
> disable irq itself and could go with spin_lock in place of
> spin_lock_irqsave (rx_bottom can't, of course).
I think I misunderstand your meaning.
I would modify them. Thanks.
Best Regards,
Hayes
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH net-next 13/14] r8152: set disable_hub_initiated_lpm
2014-02-18 13:48 [PATCH net-next 00/14] r8152: improvement and new features Hayes Wang
` (11 preceding siblings ...)
2014-02-18 13:49 ` [PATCH net-next 12/14] r8152: replace netif_rx with netif_receive_skb Hayes Wang
@ 2014-02-18 13:49 ` Hayes Wang
2014-02-18 13:49 ` [PATCH net-next 14/14] r8152: support get_msglevel and set_msglevel Hayes Wang
2014-02-18 21:41 ` [PATCH net-next 00/14] r8152: improvement and new features David Miller
14 siblings, 0 replies; 22+ messages in thread
From: Hayes Wang @ 2014-02-18 13:49 UTC (permalink / raw)
To: netdev; +Cc: nic_swsd, linux-kernel, linux-usb, Hayes Wang
Set disable_hub_initiated_lpm = 1.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
drivers/net/usb/r8152.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index ff02d5d..db98842 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -3159,6 +3159,7 @@ static struct usb_driver rtl8152_driver = {
.resume = rtl8152_resume,
.reset_resume = rtl8152_resume,
.supports_autosuspend = 1,
+ .disable_hub_initiated_lpm = 1,
};
module_usb_driver(rtl8152_driver);
--
1.8.4.2
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH net-next 14/14] r8152: support get_msglevel and set_msglevel
2014-02-18 13:48 [PATCH net-next 00/14] r8152: improvement and new features Hayes Wang
` (12 preceding siblings ...)
2014-02-18 13:49 ` [PATCH net-next 13/14] r8152: set disable_hub_initiated_lpm Hayes Wang
@ 2014-02-18 13:49 ` Hayes Wang
2014-02-18 21:41 ` [PATCH net-next 00/14] r8152: improvement and new features David Miller
14 siblings, 0 replies; 22+ messages in thread
From: Hayes Wang @ 2014-02-18 13:49 UTC (permalink / raw)
To: netdev; +Cc: nic_swsd, linux-kernel, linux-usb, Hayes Wang
Support get_msglevel and set_msglevel.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
drivers/net/usb/r8152.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index db98842..0654bd3 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -2852,6 +2852,20 @@ out_set_wol:
return ret;
}
+static u32 rtl8152_get_msglevel(struct net_device *dev)
+{
+ struct r8152 *tp = netdev_priv(dev);
+
+ return tp->msg_enable;
+}
+
+static void rtl8152_set_msglevel(struct net_device *dev, u32 value)
+{
+ struct r8152 *tp = netdev_priv(dev);
+
+ tp->msg_enable = value;
+}
+
static void rtl8152_get_drvinfo(struct net_device *netdev,
struct ethtool_drvinfo *info)
{
@@ -2895,6 +2909,8 @@ static struct ethtool_ops ops = {
.get_settings = rtl8152_get_settings,
.set_settings = rtl8152_set_settings,
.get_link = ethtool_op_get_link,
+ .get_msglevel = rtl8152_get_msglevel,
+ .set_msglevel = rtl8152_set_msglevel,
.get_wol = rtl8152_get_wol,
.set_wol = rtl8152_set_wol,
};
--
1.8.4.2
^ permalink raw reply related [flat|nested] 22+ messages in thread* Re: [PATCH net-next 00/14] r8152: improvement and new features
2014-02-18 13:48 [PATCH net-next 00/14] r8152: improvement and new features Hayes Wang
` (13 preceding siblings ...)
2014-02-18 13:49 ` [PATCH net-next 14/14] r8152: support get_msglevel and set_msglevel Hayes Wang
@ 2014-02-18 21:41 ` David Miller
14 siblings, 0 replies; 22+ messages in thread
From: David Miller @ 2014-02-18 21:41 UTC (permalink / raw)
To: hayeswang; +Cc: netdev, nic_swsd, linux-kernel, linux-usb
From: Hayes Wang <hayeswang@realtek.com>
Date: Tue, 18 Feb 2014 21:48:57 +0800
> Change some flows or behavior to improve the efficiency or make the
> code readable. Besides, support WOL and runtime suspend.
Series applied, but as Florian mentioned you should seriously consider
converting this driver to use phylib.
^ permalink raw reply [flat|nested] 22+ messages in thread