From: Alexander Aring <alex.aring-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: alex.bluesman.smirnov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Cc: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-zigbee-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,
davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org
Subject: [PATCH net-next v6 3/8] 6lowpan: fix fragmentation on sending side
Date: Fri, 28 Feb 2014 07:32:45 +0100 [thread overview]
Message-ID: <1393569170-25722-4-git-send-email-alex.aring@gmail.com> (raw)
In-Reply-To: <1393569170-25722-1-git-send-email-alex.aring-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
This patch fix the fragmentation on sending side according to rfc4944.
Also add improvement to use the full payload of a PDU which calculate
the nearest divided to 8 payload length for the fragmentation datagram
size attribute.
The main issue is that the datagram size of fragmentation header use the
ipv6 payload length, but rfc4944 says it's the ipv6 payload length inclusive
network header size (and transport header size if compressed).
Signed-off-by: Alexander Aring <alex.aring-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
net/ieee802154/6lowpan.c | 37 +++++++++++++++++++++++++++----------
1 file changed, 27 insertions(+), 10 deletions(-)
diff --git a/net/ieee802154/6lowpan.c b/net/ieee802154/6lowpan.c
index 8edfea5..872c8f9 100644
--- a/net/ieee802154/6lowpan.c
+++ b/net/ieee802154/6lowpan.c
@@ -422,44 +422,60 @@ lowpan_fragment_xmit(struct sk_buff *skb, u8 *head,
static int
lowpan_skb_fragmentation(struct sk_buff *skb, struct net_device *dev)
{
- int err, header_length, payload_length, tag, offset = 0;
+ int err;
+ u16 dgram_offset, dgram_size, payload_length, header_length,
+ lowpan_size, frag_plen, offset, tag;
u8 head[5];
header_length = skb->mac_len;
payload_length = skb->len - header_length;
tag = lowpan_dev_info(dev)->fragment_tag++;
+ lowpan_size = skb_network_header_len(skb);
+ dgram_size = lowpan_uncompress_size(skb, &dgram_offset) -
+ header_length;
/* first fragment header */
- head[0] = LOWPAN_DISPATCH_FRAG1 | ((payload_length >> 8) & 0x7);
- head[1] = payload_length & 0xff;
+ head[0] = LOWPAN_DISPATCH_FRAG1 | ((dgram_size >> 8) & 0x7);
+ head[1] = dgram_size & 0xff;
head[2] = tag >> 8;
head[3] = tag & 0xff;
- err = lowpan_fragment_xmit(skb, head, header_length, LOWPAN_FRAG_SIZE,
- 0, LOWPAN_DISPATCH_FRAG1);
+ /* calc the nearest payload length(divided to 8) for first fragment
+ * which fits into a IEEE802154_MTU
+ */
+ frag_plen = round_down(IEEE802154_MTU - header_length -
+ LOWPAN_FRAG1_HEAD_SIZE - lowpan_size -
+ IEEE802154_MFR_SIZE, 8);
+ err = lowpan_fragment_xmit(skb, head, header_length,
+ frag_plen + lowpan_size, 0,
+ LOWPAN_DISPATCH_FRAG1);
if (err) {
pr_debug("%s unable to send FRAG1 packet (tag: %d)",
__func__, tag);
goto exit;
}
- offset = LOWPAN_FRAG_SIZE;
+ offset = lowpan_size + frag_plen;
+ dgram_offset += frag_plen;
/* next fragment header */
head[0] &= ~LOWPAN_DISPATCH_FRAG1;
head[0] |= LOWPAN_DISPATCH_FRAGN;
+ frag_plen = round_down(IEEE802154_MTU - header_length -
+ LOWPAN_FRAGN_HEAD_SIZE - IEEE802154_MFR_SIZE, 8);
+
while (payload_length - offset > 0) {
- int len = LOWPAN_FRAG_SIZE;
+ int len = frag_plen;
- head[4] = offset / 8;
+ head[4] = dgram_offset >> 3;
if (payload_length - offset < len)
len = payload_length - offset;
- err = lowpan_fragment_xmit(skb, head, header_length,
- len, offset, LOWPAN_DISPATCH_FRAGN);
+ err = lowpan_fragment_xmit(skb, head, header_length, len,
+ offset, LOWPAN_DISPATCH_FRAGN);
if (err) {
pr_debug("%s unable to send a subsequent FRAGN packet "
"(tag: %d, offset: %d", __func__, tag, offset);
@@ -467,6 +483,7 @@ lowpan_skb_fragmentation(struct sk_buff *skb, struct net_device *dev)
}
offset += len;
+ dgram_offset += len;
}
exit:
--
1.9.0
------------------------------------------------------------------------------
Flow-based real-time traffic analytics software. Cisco certified tool.
Monitor traffic, SLAs, QoS, Medianet, WAAS etc. with NetFlow Analyzer
Customize your own dashboards, set traffic alerts and generate reports.
Network behavioral analysis & security monitoring. All-in-one tool.
http://pubads.g.doubleclick.net/gampad/clk?id=126839071&iu=/4140/ostg.clktrk
next prev parent reply other threads:[~2014-02-28 6:32 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-28 6:32 [PATCH net-next v6 0/8] 6lowpan: reimplementation of fragmentation handling Alexander Aring
2014-02-28 6:32 ` [PATCH net-next v6 1/8] 6lowpan: add frag information struct Alexander Aring
[not found] ` <1393569170-25722-1-git-send-email-alex.aring-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-02-28 6:32 ` [PATCH net-next v6 2/8] 6lowpan: add uncompress header size function Alexander Aring
2014-02-28 6:32 ` Alexander Aring [this message]
2014-02-28 6:32 ` [PATCH net-next v6 4/8] 6lowpan: change tag type to __be16 Alexander Aring
2014-02-28 6:32 ` [PATCH net-next v6 5/8] 6lowpan: move 6lowpan.c to 6lowpan_rtnl.c Alexander Aring
2014-02-28 6:32 ` [PATCH net-next v6 6/8] 6lowpan: fix some checkpatch issues Alexander Aring
2014-02-28 6:32 ` [PATCH net-next v6 7/8] net: ns: add ieee802154_6lowpan namespace Alexander Aring
2014-02-28 6:32 ` [PATCH net-next v6 8/8] 6lowpan: handling 6lowpan fragmentation via inet_frag api Alexander Aring
2014-02-28 22:13 ` [PATCH net-next v6 0/8] 6lowpan: reimplementation of fragmentation handling David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1393569170-25722-4-git-send-email-alex.aring@gmail.com \
--to=alex.aring-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=alex.bluesman.smirnov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org \
--cc=linux-zigbee-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
--cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).