[net-next v4 0/3] 802.21 and MPLS headers and classification

[net-next v4 0/3] 802.21 and MPLS headers and classification

[Simon Wunderlich]

this series contains a header file proposal for MPLS labels. These
labels do not seem to be properly defined in the kernel so far. We are
developing a wired/wireless 802.21/MPLS switch and need to check the
MPLS labels to use the traffic control info for transmissions over
802.11 networks.

Changes to third version:

 * rename mpls_label_stack to mpls_label (thanks Neil)
 * fix over-indendented closing brac (thanks Sergei)
 * add Johannes' Ack

Thanks,
     Simon

Simon Wunderlich (3):
  if_ether.h: add IEEE 802.21 Ethertype
  UAPI: add MPLS label stack definition
  cfg80211: add MPLS and 802.21 classification

 include/linux/mpls.h          |    6 ++++++
 include/uapi/linux/if_ether.h |    1 +
 include/uapi/linux/mpls.h     |   34 ++++++++++++++++++++++++++++++++++
 net/wireless/util.c           |   16 ++++++++++++++++
 4 files changed, 57 insertions(+)
 create mode 100644 include/linux/mpls.h
 create mode 100644 include/uapi/linux/mpls.h

-- 
1.7.10.4

[net-next v4 1/3] if_ether.h: add IEEE 802.21 Ethertype

[Simon Wunderlich]

Add the Ethertype for IEEE Std 802.21 - Media Independent Handover
Protocol. This Ethertype is used for network control messages.

Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
---
 include/uapi/linux/if_ether.h |    1 +
 1 file changed, 1 insertion(+)

diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h
index ba8b15f..750ba67 100644
--- a/include/uapi/linux/if_ether.h
+++ b/include/uapi/linux/if_ether.h
@@ -89,6 +89,7 @@
 #define ETH_P_FCOE	0x8906		/* Fibre Channel over Ethernet  */
 #define ETH_P_TDLS	0x890D          /* TDLS */
 #define ETH_P_FIP	0x8914		/* FCoE Initialization Protocol */
+#define ETH_P_80221	0x8917		/* IEEE 802.21 Media Independent Handover Protocol */
 #define ETH_P_QINQ1	0x9100		/* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
 #define ETH_P_QINQ2	0x9200		/* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
 #define ETH_P_QINQ3	0x9300		/* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
-- 
1.7.10.4

[net-next v4 2/3] UAPI: add MPLS label stack definition

[Simon Wunderlich]

Labels for the Multiprotocol Label Switching are defined in RFC 3032
which was superseded by RFC 5462. Add the definition to UAPI and a stub
header for include/linux.

Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
---
Changes to third version:

 * rename mpls_label_stack to mpls_label, as it describes just one of
   possibly multiple label stack entries (see RFC 3032).

Changes to first version:

 * add stub mpls header in include/linux/mpls.h for users inside the
   kernel
---
 include/linux/mpls.h      |    6 ++++++
 include/uapi/linux/mpls.h |   34 ++++++++++++++++++++++++++++++++++
 2 files changed, 40 insertions(+)
 create mode 100644 include/linux/mpls.h
 create mode 100644 include/uapi/linux/mpls.h

diff --git a/include/linux/mpls.h b/include/linux/mpls.h
new file mode 100644
index 0000000..9999145
--- /dev/null
+++ b/include/linux/mpls.h
@@ -0,0 +1,6 @@
+#ifndef _LINUX_MPLS_H
+#define _LINUX_MPLS_H
+
+#include <uapi/linux/mpls.h>
+
+#endif  /* _LINUX_MPLS_H */
diff --git a/include/uapi/linux/mpls.h b/include/uapi/linux/mpls.h
new file mode 100644
index 0000000..bc9abfe
--- /dev/null
+++ b/include/uapi/linux/mpls.h
@@ -0,0 +1,34 @@
+#ifndef _UAPI_MPLS_H
+#define _UAPI_MPLS_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+/* Reference: RFC 5462, RFC 3032
+ *
+ *  0                   1                   2                   3
+ *  0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * |                Label                  | TC  |S|       TTL     |
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ *	Label:  Label Value, 20 bits
+ *	TC:     Traffic Class field, 3 bits
+ *	S:      Bottom of Stack, 1 bit
+ *	TTL:    Time to Live, 8 bits
+ */
+
+struct mpls_label {
+	__be32 entry;
+};
+
+#define MPLS_LS_LABEL_MASK      0xFFFFF000
+#define MPLS_LS_LABEL_SHIFT     12
+#define MPLS_LS_TC_MASK         0x00000E00
+#define MPLS_LS_TC_SHIFT        9
+#define MPLS_LS_S_MASK          0x00000100
+#define MPLS_LS_S_SHIFT         8
+#define MPLS_LS_TTL_MASK        0x000000FF
+#define MPLS_LS_TTL_SHIFT       0
+
+#endif /* _UAPI_MPLS_H */
-- 
1.7.10.4

[net-next v4 3/3] cfg80211: add MPLS and 802.21 classification

[Simon Wunderlich]

MPLS labels may contain traffic control information, which should be
evaluated and used by the wireless subsystem if present.

Also check for IEEE 802.21 which is always network control traffic.

Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
---
Changes to third version:

 * add Johannes' Ack
 * fix over-indented closing brace

Changes to second version:

 * rely on skb->protocol instead of checking ethertype

Changes to first version:

 * include linux/mpls.h, not the UAPI one
 * change __constant_htons to htons
---
 net/wireless/util.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/net/wireless/util.c b/net/wireless/util.c
index 780b454..ad03af3 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -11,6 +11,7 @@
 #include <net/ip.h>
 #include <net/dsfield.h>
 #include <linux/if_vlan.h>
+#include <linux/mpls.h>
 #include "core.h"
 #include "rdev-ops.h"
 
@@ -717,6 +718,21 @@ unsigned int cfg80211_classify8021d(struct sk_buff *skb,
 	case htons(ETH_P_IPV6):
 		dscp = ipv6_get_dsfield(ipv6_hdr(skb)) & 0xfc;
 		break;
+	case htons(ETH_P_MPLS_UC):
+	case htons(ETH_P_MPLS_MC): {
+		struct mpls_label mpls_tmp, *mpls;
+
+		mpls = skb_header_pointer(skb, sizeof(struct ethhdr),
+					  sizeof(*mpls), &mpls_tmp);
+		if (!mpls)
+			return 0;
+
+		return (ntohl(mpls->entry) & MPLS_LS_TC_MASK)
+			>> MPLS_LS_TC_SHIFT;
+	}
+	case htons(ETH_P_80221):
+		/* 802.21 is always network control traffic */
+		return 7;
 	default:
 		return 0;
 	}
-- 
1.7.10.4

Re: [net-next v4 0/3] 802.21 and MPLS headers and classification

[David Miller]

From: Simon Wunderlich <sw@simonwunderlich.de>
Date: Mon,  3 Mar 2014 17:23:09 +0100

> this series contains a header file proposal for MPLS labels. These
> labels do not seem to be properly defined in the kernel so far. We are
> developing a wired/wireless 802.21/MPLS switch and need to check the
> MPLS labels to use the traffic control info for transmissions over
> 802.11 networks.
> 
> Changes to third version:
> 
>  * rename mpls_label_stack to mpls_label (thanks Neil)
>  * fix over-indendented closing brac (thanks Sergei)
>  * add Johannes' Ack

Series applied, thanks Simon.