From: Antonio Quartulli <antonio@meshcoding.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, b.a.t.m.a.n@lists.open-mesh.org,
"Linus Lüssing" <linus.luessing@web.de>,
"Marek Lindner" <mareklindner@neomailbox.ch>,
"Antonio Quartulli" <antonio@meshcoding.com>
Subject: [PATCH 02/16] batman-adv: use vlan_/eth_hdr() instead of skb->data in interface_tx path
Date: Sat, 22 Mar 2014 09:56:02 +0100 [thread overview]
Message-ID: <1395478576-10999-3-git-send-email-antonio@meshcoding.com> (raw)
In-Reply-To: <1395478576-10999-1-git-send-email-antonio@meshcoding.com>
From: Linus Lüssing <linus.luessing@web.de>
Our .ndo_start_xmit handler (batadv_interface_tx()) can rely on having
the skb mac header pointer set correctly since the following commit
present in kernels >= 3.9:
"net: reset mac header in dev_start_xmit()" (6d1ccff627)
Therefore we can safely use eth_hdr() and vlan_eth_hdr() instead of
skb->data now, which spares us some ugly type casts.
At the same time set the mac_header in batadv_dat_snoop_incoming_arp_request()
before sending the skb along the TX path.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
---
net/batman-adv/bridge_loop_avoidance.c | 2 +-
net/batman-adv/distributed-arp-table.c | 5 +++++
net/batman-adv/gateway_client.c | 6 +++---
net/batman-adv/send.c | 11 +++++------
net/batman-adv/soft-interface.c | 8 ++++----
5 files changed, 18 insertions(+), 14 deletions(-)
diff --git a/net/batman-adv/bridge_loop_avoidance.c b/net/batman-adv/bridge_loop_avoidance.c
index 05f0712..73d8372 100644
--- a/net/batman-adv/bridge_loop_avoidance.c
+++ b/net/batman-adv/bridge_loop_avoidance.c
@@ -882,7 +882,7 @@ static int batadv_bla_process_claim(struct batadv_priv *bat_priv,
proto = ethhdr->h_proto;
headlen = ETH_HLEN;
if (vid & BATADV_VLAN_HAS_TAG) {
- vhdr = (struct vlan_ethhdr *)ethhdr;
+ vhdr = vlan_eth_hdr(skb);
proto = vhdr->h_vlan_encapsulated_proto;
headlen += VLAN_HLEN;
}
diff --git a/net/batman-adv/distributed-arp-table.c b/net/batman-adv/distributed-arp-table.c
index edee504..5bb37a8 100644
--- a/net/batman-adv/distributed-arp-table.c
+++ b/net/batman-adv/distributed-arp-table.c
@@ -1027,6 +1027,11 @@ bool batadv_dat_snoop_incoming_arp_request(struct batadv_priv *bat_priv,
if (!skb_new)
goto out;
+ /* the rest of the TX path assumes that the mac_header offset pointing
+ * to the inner Ethernet header has been set, therefore reset it now.
+ */
+ skb_reset_mac_header(skb_new);
+
if (vid & BATADV_VLAN_HAS_TAG)
skb_new = vlan_insert_tag(skb_new, htons(ETH_P_8021Q),
vid & VLAN_VID_MASK);
diff --git a/net/batman-adv/gateway_client.c b/net/batman-adv/gateway_client.c
index d7fafc1..07c7f21 100644
--- a/net/batman-adv/gateway_client.c
+++ b/net/batman-adv/gateway_client.c
@@ -678,7 +678,7 @@ batadv_gw_dhcp_recipient_get(struct sk_buff *skb, unsigned int *header_len,
if (!pskb_may_pull(skb, *header_len + ETH_HLEN))
return BATADV_DHCP_NO;
- ethhdr = (struct ethhdr *)skb->data;
+ ethhdr = eth_hdr(skb);
proto = ethhdr->h_proto;
*header_len += ETH_HLEN;
@@ -687,7 +687,7 @@ batadv_gw_dhcp_recipient_get(struct sk_buff *skb, unsigned int *header_len,
if (!pskb_may_pull(skb, *header_len + VLAN_HLEN))
return BATADV_DHCP_NO;
- vhdr = (struct vlan_ethhdr *)skb->data;
+ vhdr = vlan_eth_hdr(skb);
proto = vhdr->h_vlan_encapsulated_proto;
*header_len += VLAN_HLEN;
}
@@ -726,7 +726,7 @@ batadv_gw_dhcp_recipient_get(struct sk_buff *skb, unsigned int *header_len,
return BATADV_DHCP_NO;
/* skb->data might have been reallocated by pskb_may_pull() */
- ethhdr = (struct ethhdr *)skb->data;
+ ethhdr = eth_hdr(skb);
if (ntohs(ethhdr->h_proto) == ETH_P_8021Q)
ethhdr = (struct ethhdr *)(skb->data + VLAN_HLEN);
diff --git a/net/batman-adv/send.c b/net/batman-adv/send.c
index 843febd..1703a2e 100644
--- a/net/batman-adv/send.c
+++ b/net/batman-adv/send.c
@@ -256,7 +256,7 @@ static int batadv_send_skb_unicast(struct batadv_priv *bat_priv,
{
struct ethhdr *ethhdr;
struct batadv_unicast_packet *unicast_packet;
- int ret = NET_XMIT_DROP, hdr_size;
+ int ret = NET_XMIT_DROP;
if (!orig_node)
goto out;
@@ -265,16 +265,12 @@ static int batadv_send_skb_unicast(struct batadv_priv *bat_priv,
case BATADV_UNICAST:
if (!batadv_send_skb_prepare_unicast(skb, orig_node))
goto out;
-
- hdr_size = sizeof(*unicast_packet);
break;
case BATADV_UNICAST_4ADDR:
if (!batadv_send_skb_prepare_unicast_4addr(bat_priv, skb,
orig_node,
packet_subtype))
goto out;
-
- hdr_size = sizeof(struct batadv_unicast_4addr_packet);
break;
default:
/* this function supports UNICAST and UNICAST_4ADDR only. It
@@ -283,7 +279,10 @@ static int batadv_send_skb_unicast(struct batadv_priv *bat_priv,
goto out;
}
- ethhdr = (struct ethhdr *)(skb->data + hdr_size);
+ /* skb->data might have been reallocated by
+ * batadv_send_skb_prepare_unicast{,_4addr}()
+ */
+ ethhdr = eth_hdr(skb);
unicast_packet = (struct batadv_unicast_packet *)skb->data;
/* inform the destination node that we are still missing a correct route
diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c
index f82c267..c4392fc 100644
--- a/net/batman-adv/soft-interface.c
+++ b/net/batman-adv/soft-interface.c
@@ -176,11 +176,11 @@ static int batadv_interface_tx(struct sk_buff *skb,
soft_iface->trans_start = jiffies;
vid = batadv_get_vid(skb, 0);
- ethhdr = (struct ethhdr *)skb->data;
+ ethhdr = eth_hdr(skb);
switch (ntohs(ethhdr->h_proto)) {
case ETH_P_8021Q:
- vhdr = (struct vlan_ethhdr *)skb->data;
+ vhdr = vlan_eth_hdr(skb);
if (vhdr->h_vlan_encapsulated_proto != ethertype)
break;
@@ -194,7 +194,7 @@ static int batadv_interface_tx(struct sk_buff *skb,
goto dropped;
/* skb->data might have been reallocated by batadv_bla_tx() */
- ethhdr = (struct ethhdr *)skb->data;
+ ethhdr = eth_hdr(skb);
/* Register the client MAC in the transtable */
if (!is_multicast_ether_addr(ethhdr->h_source)) {
@@ -230,7 +230,7 @@ static int batadv_interface_tx(struct sk_buff *skb,
/* skb->data may have been modified by
* batadv_gw_dhcp_recipient_get()
*/
- ethhdr = (struct ethhdr *)skb->data;
+ ethhdr = eth_hdr(skb);
/* if gw_mode is on, broadcast any non-DHCP message.
* All the DHCP packets are going to be sent as unicast
*/
--
1.8.3.2
next prev parent reply other threads:[~2014-03-22 8:56 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-22 8:56 pull request: batman-adv 20140322 Antonio Quartulli
2014-03-22 8:56 ` [PATCH 01/16] batman-adv: fix coccinelle warnings Antonio Quartulli
2014-03-22 8:56 ` Antonio Quartulli [this message]
2014-03-22 8:56 ` [PATCH 03/16] batman-adv: remove obsolete skb_reset_mac_header() in batadv_bla_tx() Antonio Quartulli
2014-03-22 8:56 ` [PATCH 04/16] batman-adv: prefer ether_addr_copy to memcpy Antonio Quartulli
2014-03-22 8:56 ` [PATCH 05/16] batman-adv: fix a few kerneldoc inconsistencies Antonio Quartulli
2014-03-22 8:56 ` [PATCH 06/16] batman-adv: call unregister_netdev() to have it handle the locking for us Antonio Quartulli
2014-03-22 8:56 ` [PATCH 07/16] batman-adv: add kerneldoc for dst_hint argument Antonio Quartulli
2014-03-22 8:56 ` [PATCH 08/16] batman-adv: Multicast Listener Announcements via Translation Table Antonio Quartulli
2014-03-22 8:56 ` [PATCH 09/16] batman-adv: introduce capability initialization bitfield Antonio Quartulli
2014-03-22 8:56 ` [PATCH 10/16] batman-adv: Announce new capability via multicast TVLV Antonio Quartulli
2014-03-22 8:56 ` [PATCH 11/16] batman-adv: Modified forwarding behaviour for multicast packets Antonio Quartulli
2014-03-22 8:56 ` [PATCH 12/16] batman-adv: Add IPv4 link-local/IPv6-ll-all-nodes multicast support Antonio Quartulli
2014-03-22 8:56 ` [PATCH 13/16] batman-adv: Send multicast packets to nodes with a WANT_ALL flag Antonio Quartulli
2014-03-22 8:56 ` [PATCH 14/16] batman-adv: improve the TT flags documentation Antonio Quartulli
2014-03-22 8:56 ` [PATCH 15/16] batman-adv: improve DAT documentation Antonio Quartulli
2014-03-22 8:56 ` [PATCH 16/16] batman-adv: Start new development cycle Antonio Quartulli
2014-03-22 19:00 ` pull request: batman-adv 20140322 David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1395478576-10999-3-git-send-email-antonio@meshcoding.com \
--to=antonio@meshcoding.com \
--cc=b.a.t.m.a.n@lists.open-mesh.org \
--cc=davem@davemloft.net \
--cc=linus.luessing@web.de \
--cc=mareklindner@neomailbox.ch \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).