From: Adam Lee <adam.lee-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org>
To: linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Larry Finger
<Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>,
stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
"John W. Linville"
<linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>,
Chaoming Li <chaoming_li-kXabqFNEczNtrwSWzY7KCg@public.gmane.org>
Subject: [PATCH v2] rtlwifi: add MSI interrupts support
Date: Tue, 25 Mar 2014 10:48:52 +0800 [thread overview]
Message-ID: <1395715732-9545-1-git-send-email-adam.lee@canonical.com> (raw)
In-Reply-To: <1395660884-15042-1-git-send-email-adam.lee-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org>
Add MSI interrupts support, enable it when msi_support flag is true,
also could fallback to pin-based interrupts mode if MSI mode fails.
Signed-off-by: Adam Lee <adam.lee-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org>
Cc: <stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> [3.10+]
---
drivers/net/wireless/rtlwifi/pci.c | 65 ++++++++++++++++++++++++++++++++++++--
1 file changed, 63 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
index f26f4ff..155d010 100644
--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -1853,6 +1853,65 @@ static bool _rtl_pci_find_adapter(struct pci_dev *pdev,
return true;
}
+static int rtl_pci_intr_mode_msi(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+ struct rtl_pci *rtlpci = rtl_pcidev(pcipriv);
+ int ret;
+
+ ret = pci_enable_msi(rtlpci->pdev);
+ if (ret < 0)
+ return ret;
+
+ ret = request_irq(rtlpci->pdev->irq, &_rtl_pci_interrupt,
+ IRQF_SHARED, KBUILD_MODNAME, hw);
+ if (ret < 0) {
+ pci_disable_msi(rtlpci->pdev);
+ return ret;
+ }
+
+ rtlpci->using_msi = true;
+
+ RT_TRACE(rtlpriv, COMP_INIT|COMP_INTR, DBG_DMESG,
+ "MSI Interrupt Mode!\n");
+ return 0;
+}
+
+static int rtl_pci_intr_mode_legacy(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+ struct rtl_pci *rtlpci = rtl_pcidev(pcipriv);
+ int ret;
+
+ ret = request_irq(rtlpci->pdev->irq, &_rtl_pci_interrupt,
+ IRQF_SHARED, KBUILD_MODNAME, hw);
+ if (ret < 0)
+ return ret;
+
+ rtlpci->using_msi = false;
+ RT_TRACE(rtlpriv, COMP_INIT|COMP_INTR, DBG_DMESG,
+ "Pin-based Interrupt Mode!\n");
+ return 0;
+}
+
+static int rtl_pci_intr_mode_decide(struct ieee80211_hw *hw)
+{
+ struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+ struct rtl_pci *rtlpci = rtl_pcidev(pcipriv);
+ int ret;
+
+ if (rtlpci->msi_support) {
+ ret = rtl_pci_intr_mode_msi(hw);
+ if (ret < 0)
+ ret = rtl_pci_intr_mode_legacy(hw);
+ } else {
+ ret = rtl_pci_intr_mode_legacy(hw);
+ }
+ return ret;
+}
+
int rtl_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
@@ -1995,8 +2054,7 @@ int rtl_pci_probe(struct pci_dev *pdev,
}
rtlpci = rtl_pcidev(pcipriv);
- err = request_irq(rtlpci->pdev->irq, &_rtl_pci_interrupt,
- IRQF_SHARED, KBUILD_MODNAME, hw);
+ err = rtl_pci_intr_mode_decide(hw);
if (err) {
RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
"%s: failed to register IRQ handler\n",
@@ -2064,6 +2122,9 @@ void rtl_pci_disconnect(struct pci_dev *pdev)
rtlpci->irq_alloc = 0;
}
+ if (rtlpci->using_msi)
+ pci_disable_msi(rtlpci->pdev);
+
list_del(&rtlpriv->list);
if (rtlpriv->io.pci_mem_start != 0) {
pci_iounmap(pdev, (void __iomem *)rtlpriv->io.pci_mem_start);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-03-25 2:48 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-24 6:00 [PATCH] rtlwifi: rtl8188ee: enable MSI interrupts support Adam Lee
[not found] ` <1395640841-14477-1-git-send-email-adam.lee-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org>
2014-03-24 6:05 ` Adam Lee
2014-03-24 6:12 ` Greg KH
2014-03-24 11:34 ` [PATCH] rtlwifi: add " Adam Lee
2014-03-24 15:14 ` Larry Finger
[not found] ` <53304BBE.6040403-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
2014-03-25 9:13 ` Adam Lee
[not found] ` <1395660884-15042-1-git-send-email-adam.lee-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org>
2014-03-24 11:49 ` Adam Lee
2014-03-25 2:48 ` Adam Lee [this message]
[not found] ` <1395715732-9545-1-git-send-email-adam.lee-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org>
2014-03-27 18:15 ` [PATCH v2] " John W. Linville
2014-03-27 18:45 ` Larry Finger
2014-03-28 3:36 ` [PATCH v3 1/2] rtlwifi: add MSI interrupts mode support Adam Lee
[not found] ` <1395977779-16093-1-git-send-email-adam.lee-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org>
2014-03-28 3:36 ` [PATCH v3 2/2] rtlwifi: rtl8188ee: enable MSI interrupts mode Adam Lee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1395715732-9545-1-git-send-email-adam.lee@canonical.com \
--to=adam.lee-z7wlfzj8ewms+fvcfc7uqw@public.gmane.org \
--cc=Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org \
--cc=chaoming_li-kXabqFNEczNtrwSWzY7KCg@public.gmane.org \
--cc=linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org \
--cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).