From: Mahesh Bandewar <maheshb@google.com>
To: Jay Vosburgh <fubar@us.ibm.com>,
Veaceslav Falico <vfalico@redhat.com>,
Andy Gospodarek <andy@greyhouse.net>,
David Miller <davem@davemloft.net>
Cc: netdev <netdev@vger.kernel.org>,
Mahesh Bandewar <maheshb@google.com>,
Eric Dumazet <edumazet@google.com>,
Maciej Zenczykowski <maze@google.com>
Subject: [PATCH 4/5] bonding: Added bond_tlb_xmit() for tlb mode.
Date: Fri, 28 Mar 2014 22:29:07 -0700 [thread overview]
Message-ID: <1396070947-17721-1-git-send-email-maheshb@google.com> (raw)
Re-organized the xmit function for the lb mode separating tlb xmit
from the alb mode. This will enable use of the hashing policies
like 802.3ad mode. Also extended use of xmit-hash-policy to tlb mode.
Now the tlb-mode defaults to BOND_XMIT_POLICY_LAYER2 if the xmit policy
module parameter is not set (just like 802.3ad, or Xor mode).
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
---
drivers/net/bonding/bond_alb.c | 25 +++++++++++++++++++++++++
drivers/net/bonding/bond_alb.h | 1 +
drivers/net/bonding/bond_main.c | 6 ++++--
drivers/net/bonding/bond_options.c | 2 +-
4 files changed, 31 insertions(+), 3 deletions(-)
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index 5cd36016c393..8b7426ce6182 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -1381,6 +1381,31 @@ out:
return NETDEV_TX_OK;
}
+int bond_tlb_xmit(struct sk_buff *skb, struct net_device *bond_dev)
+{
+ struct bonding *bond = netdev_priv(bond_dev);
+ struct ethhdr *eth_data;
+ struct slave *tx_slave = NULL;
+ u32 hash_index = 0;
+
+ skb_reset_mac_header(skb);
+ eth_data = eth_hdr(skb);
+
+ /* Do not TX balance any multicast or broadcast */
+ if (!is_multicast_ether_addr(eth_data->h_dest)) {
+ switch (ntohs(skb->protocol)) {
+ case ETH_P_IP:
+ case ETH_P_IPX: /* In case of IPX, it will falback to L2 hash */
+ case ETH_P_IPV6:
+ hash_index = bond_xmit_hash(bond, skb);
+ tx_slave = tlb_choose_channel(bond, hash_index & 0xFF, skb->len);
+ break;
+ }
+ }
+
+ return bond_do_alb_xmit(skb, bond, tx_slave);
+}
+
int bond_alb_xmit(struct sk_buff *skb, struct net_device *bond_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
diff --git a/drivers/net/bonding/bond_alb.h b/drivers/net/bonding/bond_alb.h
index e09dd4bfafff..5fc76c01636c 100644
--- a/drivers/net/bonding/bond_alb.h
+++ b/drivers/net/bonding/bond_alb.h
@@ -175,6 +175,7 @@ void bond_alb_deinit_slave(struct bonding *bond, struct slave *slave);
void bond_alb_handle_link_change(struct bonding *bond, struct slave *slave, char link);
void bond_alb_handle_active_change(struct bonding *bond, struct slave *new_slave);
int bond_alb_xmit(struct sk_buff *skb, struct net_device *bond_dev);
+int bond_tlb_xmit(struct sk_buff *skb, struct net_device *bond_dev);
void bond_alb_monitor(struct work_struct *);
int bond_alb_set_mac_address(struct net_device *bond_dev, void *addr);
void bond_alb_clear_vlan(struct bonding *bond, unsigned short vlan_id);
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index e4f062ddc23e..23e4073ec798 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -3776,8 +3776,9 @@ static netdev_tx_t __bond_start_xmit(struct sk_buff *skb, struct net_device *dev
case BOND_MODE_8023AD:
return bond_3ad_xmit_xor(skb, dev);
case BOND_MODE_ALB:
- case BOND_MODE_TLB:
return bond_alb_xmit(skb, dev);
+ case BOND_MODE_TLB:
+ return bond_tlb_xmit(skb, dev);
default:
/* Should never happen, mode already checked */
pr_err("%s: Error: Unknown bonding mode %d\n",
@@ -3998,7 +3999,8 @@ static int bond_check_params(struct bond_params *params)
if (xmit_hash_policy) {
if ((bond_mode != BOND_MODE_XOR) &&
- (bond_mode != BOND_MODE_8023AD)) {
+ (bond_mode != BOND_MODE_8023AD) &&
+ (bond_mode != BOND_MODE_TLB)) {
pr_info("xmit_hash_policy param is irrelevant in mode %s\n",
bond_mode_name(bond_mode));
} else {
diff --git a/drivers/net/bonding/bond_options.c b/drivers/net/bonding/bond_options.c
index 724e30fa20b9..dc3893841752 100644
--- a/drivers/net/bonding/bond_options.c
+++ b/drivers/net/bonding/bond_options.c
@@ -199,7 +199,7 @@ static const struct bond_option bond_opts[] = {
[BOND_OPT_XMIT_HASH] = {
.id = BOND_OPT_XMIT_HASH,
.name = "xmit_hash_policy",
- .desc = "balance-xor and 802.3ad hashing method",
+ .desc = "balance-xor, 802.3ad, and tlb hashing method",
.values = bond_xmit_hashtype_tbl,
.set = bond_option_xmit_hash_policy_set
},
--
1.9.1.423.g4596e3a
next reply other threads:[~2014-03-29 5:29 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-29 5:29 Mahesh Bandewar [this message]
2014-03-31 15:52 ` [PATCH 4/5] bonding: Added bond_tlb_xmit() for tlb mode Eric Dumazet
2014-03-31 16:00 ` David Laight
2014-03-31 16:22 ` Eric Dumazet
2014-04-01 8:33 ` David Laight
2014-03-31 22:16 ` Mahesh Bandewar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1396070947-17721-1-git-send-email-maheshb@google.com \
--to=maheshb@google.com \
--cc=andy@greyhouse.net \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=fubar@us.ibm.com \
--cc=maze@google.com \
--cc=netdev@vger.kernel.org \
--cc=vfalico@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).