netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marc Kleine-Budde <mkl@pengutronix.de>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, linux-can@vger.kernel.org,
	kernel@pengutronix.de, Thomas Gleixner <tglx@linutronix.de>,
	Marc Kleine-Budde <mkl@pengutronix.de>
Subject: [PATCH 02/26] can: c_can: Fix startup logic
Date: Fri, 25 Apr 2014 00:00:05 +0200	[thread overview]
Message-ID: <1398376829-6771-3-git-send-email-mkl@pengutronix.de> (raw)
In-Reply-To: <1398376829-6771-1-git-send-email-mkl@pengutronix.de>

From: Thomas Gleixner <tglx@linutronix.de>

c_can_start() enables interrupts way too early. The first enabling
happens when setting the control mode in c_can_chip_config() and then
again at the end of the function.

But that happens before napi_enable() and that means that an interrupt
which comes in will disable interrupts again and call napi_schedule,
which ignores the request and the later napi_enable() is not making
thinks work either. So the interface is up with all device interrupts
disabled.

Move the device interrupt after napi_enable() and add it to the other
callsites of c_can_start() in c_can_set_mode() and c_can_power_up()

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/c_can/c_can.c | 35 +++++++++++++++++------------------
 1 file changed, 17 insertions(+), 18 deletions(-)

diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index a5c8dcf..b1629a4 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -612,30 +612,22 @@ static int c_can_chip_config(struct net_device *dev)
 	struct c_can_priv *priv = netdev_priv(dev);
 
 	/* enable automatic retransmission */
-	priv->write_reg(priv, C_CAN_CTRL_REG,
-			CONTROL_ENABLE_AR);
+	priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_ENABLE_AR);
 
 	if ((priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) &&
 	    (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)) {
 		/* loopback + silent mode : useful for hot self-test */
-		priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_EIE |
-				CONTROL_SIE | CONTROL_IE | CONTROL_TEST);
-		priv->write_reg(priv, C_CAN_TEST_REG,
-				TEST_LBACK | TEST_SILENT);
+		priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_TEST);
+		priv->write_reg(priv, C_CAN_TEST_REG, TEST_LBACK | TEST_SILENT);
 	} else if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) {
 		/* loopback mode : useful for self-test function */
-		priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_EIE |
-				CONTROL_SIE | CONTROL_IE | CONTROL_TEST);
+		priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_TEST);
 		priv->write_reg(priv, C_CAN_TEST_REG, TEST_LBACK);
 	} else if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) {
 		/* silent mode : bus-monitoring mode */
-		priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_EIE |
-				CONTROL_SIE | CONTROL_IE | CONTROL_TEST);
+		priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_TEST);
 		priv->write_reg(priv, C_CAN_TEST_REG, TEST_SILENT);
-	} else
-		/* normal mode*/
-		priv->write_reg(priv, C_CAN_CTRL_REG,
-				CONTROL_EIE | CONTROL_SIE | CONTROL_IE);
+	}
 
 	/* configure message objects */
 	c_can_configure_msg_objects(dev);
@@ -662,9 +654,6 @@ static int c_can_start(struct net_device *dev)
 	/* reset tx helper pointers */
 	priv->tx_next = priv->tx_echo = 0;
 
-	/* enable status change, error and module interrupts */
-	c_can_enable_all_interrupts(priv, ENABLE_ALL_INTERRUPTS);
-
 	return 0;
 }
 
@@ -681,6 +670,7 @@ static void c_can_stop(struct net_device *dev)
 
 static int c_can_set_mode(struct net_device *dev, enum can_mode mode)
 {
+	struct c_can_priv *priv = netdev_priv(dev);
 	int err;
 
 	switch (mode) {
@@ -689,6 +679,8 @@ static int c_can_set_mode(struct net_device *dev, enum can_mode mode)
 		if (err)
 			return err;
 		netif_wake_queue(dev);
+		/* enable status change, error and module interrupts */
+		c_can_enable_all_interrupts(priv, ENABLE_ALL_INTERRUPTS);
 		break;
 	default:
 		return -EOPNOTSUPP;
@@ -1184,6 +1176,8 @@ static int c_can_open(struct net_device *dev)
 	can_led_event(dev, CAN_LED_EVENT_OPEN);
 
 	napi_enable(&priv->napi);
+	/* enable status change, error and module interrupts */
+	c_can_enable_all_interrupts(priv, ENABLE_ALL_INTERRUPTS);
 	netif_start_queue(dev);
 
 	return 0;
@@ -1281,6 +1275,7 @@ int c_can_power_up(struct net_device *dev)
 	u32 val;
 	unsigned long time_out;
 	struct c_can_priv *priv = netdev_priv(dev);
+	int ret;
 
 	if (!(dev->flags & IFF_UP))
 		return 0;
@@ -1307,7 +1302,11 @@ int c_can_power_up(struct net_device *dev)
 	if (time_after(jiffies, time_out))
 		return -ETIMEDOUT;
 
-	return c_can_start(dev);
+	ret = c_can_start(dev);
+	if (!ret)
+		c_can_enable_all_interrupts(priv, ENABLE_ALL_INTERRUPTS);
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(c_can_power_up);
 #endif
-- 
1.9.0.279.gdc9e3eb


  parent reply	other threads:[~2014-04-24 22:00 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-24 22:00 pull-request: can 2014-04-24 Marc Kleine-Budde
2014-04-24 22:00 ` [PATCH 01/26] can: c_can_pci: Set the type of the IP core Marc Kleine-Budde
2014-04-24 22:00 ` Marc Kleine-Budde [this message]
2014-04-29  7:29   ` [PATCH 02/26] can: c_can: Fix startup logic Yegor Yefremov
2014-05-02 12:37     ` Marc Kleine-Budde
2014-04-24 22:00 ` [PATCH 03/26] can: c_can: Make bus off interrupt disable logic work Marc Kleine-Budde
2014-04-24 22:00 ` [PATCH 04/26] can: c_can: Do not access skb after net_receive_skb() Marc Kleine-Budde
2014-04-24 22:00 ` [PATCH 05/26] can: c_can: Handle state change correctly Marc Kleine-Budde
2014-04-24 22:00 ` [PATCH 06/26] can: c_can: Fix berr reporting Marc Kleine-Budde
2014-04-24 22:00 ` [PATCH 07/26] can: c_can: Always update error stats Marc Kleine-Budde
2014-04-24 22:00 ` [PATCH 08/26] can: c_can: Simplify buffer reenabling Marc Kleine-Budde
2014-04-24 22:00 ` [PATCH 09/26] can: c_can: Avoid status register update for D_CAN Marc Kleine-Budde
2014-04-24 22:00 ` [PATCH 10/26] can: c_can: Get rid of pointless interrupts Marc Kleine-Budde
2014-04-24 22:00 ` [PATCH 11/26] can: c_can: Disable rx split as workaround Marc Kleine-Budde
2014-04-24 22:00 ` [PATCH 12/26] can: c_can: Work around C_CAN RX wreckage Marc Kleine-Budde
2014-04-24 22:00 ` [PATCH 13/26] can: c_can: Cleanup irq enable/disable Marc Kleine-Budde
2014-04-24 22:00 ` [PATCH 14/26] can: c_can: Cleanup c_can_read_msg_object() Marc Kleine-Budde
2014-04-24 22:00 ` [PATCH 15/26] can: c_can: Cleanup setup of receive buffers Marc Kleine-Budde
2014-04-24 22:00 ` [PATCH 16/26] can: c_can: Cleanup c_can_inval_msg_object() Marc Kleine-Budde
2014-04-24 22:00 ` [PATCH 17/26] can: c_can: Cleanup c_can_msg_obj_put/get() Marc Kleine-Budde
2014-04-24 22:00 ` [PATCH 18/26] can: c_can: Cleanup c_can_write_msg_object() Marc Kleine-Budde
2014-04-24 22:00 ` [PATCH 19/26] can: c_can: Use proper u32 variables in c_can_write_msg_object() Marc Kleine-Budde
2014-04-24 22:00 ` [PATCH 20/26] can: c_can: Remove tx locking Marc Kleine-Budde
2014-04-24 22:00 ` [PATCH 21/26] can: c_can: Speed up tx buffer invalidation Marc Kleine-Budde
2014-04-24 22:00 ` [PATCH 22/26] can: c_can: use proper type for 'instance' Marc Kleine-Budde
2014-04-24 22:00 ` [PATCH 23/26] can: c_can_pci: enable PCI bus master only for MSI Marc Kleine-Budde
2014-04-24 22:00 ` [PATCH 24/26] can: sja1000_isa: add locking for indirect register access mode Marc Kleine-Budde
2014-04-24 22:00 ` [PATCH 25/26] can: fix return value from can_get_bittiming() Marc Kleine-Budde
2014-04-24 22:00 ` [PATCH 26/26] can: slcan: Fix spinlock variant Marc Kleine-Budde
2014-04-24 22:04 ` pull-request: can 2014-04-24 Marc Kleine-Budde
2014-04-26 16:31 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1398376829-6771-3-git-send-email-mkl@pengutronix.de \
    --to=mkl@pengutronix.de \
    --cc=davem@davemloft.net \
    --cc=kernel@pengutronix.de \
    --cc=linux-can@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).