[RFC net-next 07/11] net: dsa: allow drivers to do link adjustment

[Florian Fainelli <f.fainelli@gmail.com>]

Whenever libphy determines that the link status of a given PHY/port has
changed, allow to call into the switch driver link adjustment callback
so proper actions can be taken care of by the switch driver.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 include/net/dsa.h | 7 +++++++
 net/dsa/slave.c   | 4 ++++
 2 files changed, 11 insertions(+)

diff --git a/include/net/dsa.h b/include/net/dsa.h
index c435eaa772d5..a19bda9e260b 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -16,6 +16,7 @@
 #include <linux/timer.h>
 #include <linux/workqueue.h>
 #include <linux/of.h>
+#include <linux/phy.h>
 
 #define DSA_MAX_SWITCHES	4
 #define DSA_MAX_PORTS		12
@@ -178,6 +179,12 @@ struct dsa_switch_driver {
 	void	(*poll_link)(struct dsa_switch *ds);
 
 	/*
+	 * Link state adjustment (called from libphy)
+	 */
+	void	(*adjust_link)(struct dsa_switch *ds, int port,
+				struct phy_device *phydev);
+
+	/*
 	 * ethtool hardware statistics.
 	 */
 	void	(*get_strings)(struct dsa_switch *ds, int port, uint8_t *data);
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 7b190b6f64e4..8ed94dab1867 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -356,6 +356,7 @@ static const struct net_device_ops dummy_netdev_ops = {
 static void dsa_slave_adjust_link(struct net_device *dev)
 {
 	struct dsa_slave_priv *p = netdev_priv(dev);
+	struct dsa_switch *ds = p->parent;
 	unsigned int status_changed = 0;
 
 	if (p->old_link != p->phy->link) {
@@ -373,6 +374,9 @@ static void dsa_slave_adjust_link(struct net_device *dev)
 		p->old_pause = p->phy->pause;
 	}
 
+	if (ds->drv->adjust_link && status_changed)
+		ds->drv->adjust_link(ds, p->port, p->phy);
+
 	if (status_changed)
 		phy_print_status(p->phy);
 }
-- 
1.9.1