From: Fugang Duan <b38611@freescale.com>
To: <b20596@freescale.com>, <davem@davemloft.net>
Cc: <netdev@vger.kernel.org>, <b38611@freescale.com>,
<bhutchings@solarflare.com>, <stephen@networkplumber.org>
Subject: [PATCH 1/2] net: fec: optimize the clock management to save power
Date: Tue, 20 May 2014 13:22:51 +0800 [thread overview]
Message-ID: <1400563371-3359-1-git-send-email-b38611@freescale.com> (raw)
Add below clock management to save fec power:
- After probe, disable all clocks incluing ipg, ahb, enet_out, ptp clock.
- Open ethx interface enable necessary clocks.
Close ethx interface disable all clocks.
The patch also encapsulates the all enet clocks enable/disable to
.fec_enet_clk_enable(), which can reduce the repetitional code in
driver.
Signed-off-by: Fugang Duan <B38611@freescale.com>
---
drivers/net/ethernet/freescale/fec_main.c | 120 +++++++++++++---------------
1 files changed, 56 insertions(+), 64 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 8d69e43..99fb0dc 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -1255,6 +1255,49 @@ static int fec_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
return 0;
}
+static int fec_enet_clk_enable(struct net_device *ndev, bool enable)
+{
+ struct fec_enet_private *fep = netdev_priv(ndev);
+ int ret;
+
+ if (enable) {
+ ret = clk_prepare_enable(fep->clk_ahb);
+ if (ret)
+ return ret;
+ ret = clk_prepare_enable(fep->clk_ipg);
+ if (ret)
+ goto failed_clk_ipg;
+ if (fep->clk_enet_out) {
+ ret = clk_prepare_enable(fep->clk_enet_out);
+ if (ret)
+ goto failed_clk_enet_out;
+ }
+ if (fep->clk_ptp) {
+ ret = clk_prepare_enable(fep->clk_ptp);
+ if (ret)
+ goto failed_clk_ptp;
+ }
+ } else {
+ clk_disable_unprepare(fep->clk_ahb);
+ clk_disable_unprepare(fep->clk_ipg);
+ if (fep->clk_enet_out)
+ clk_disable_unprepare(fep->clk_enet_out);
+ if (fep->clk_ptp)
+ clk_disable_unprepare(fep->clk_ptp);
+ }
+
+ return 0;
+failed_clk_ptp:
+ if (fep->clk_enet_out)
+ clk_disable_unprepare(fep->clk_enet_out);
+failed_clk_enet_out:
+ clk_disable_unprepare(fep->clk_ipg);
+failed_clk_ipg:
+ clk_disable_unprepare(fep->clk_ahb);
+
+ return ret;
+}
+
static int fec_enet_mii_probe(struct net_device *ndev)
{
struct fec_enet_private *fep = netdev_priv(ndev);
@@ -1773,6 +1816,10 @@ fec_enet_open(struct net_device *ndev)
struct fec_enet_private *fep = netdev_priv(ndev);
int ret;
+ ret = fec_enet_clk_enable(ndev, true);
+ if (ret)
+ return ret;
+
/* I should reset the ring buffers here, but I don't yet know
* a simple way to do that.
*/
@@ -1811,6 +1858,7 @@ fec_enet_close(struct net_device *ndev)
phy_disconnect(fep->phy_dev);
}
+ fec_enet_clk_enable(ndev, false);
fec_enet_free_buffers(ndev);
return 0;
@@ -2164,26 +2212,10 @@ fec_probe(struct platform_device *pdev)
fep->bufdesc_ex = 0;
}
- ret = clk_prepare_enable(fep->clk_ahb);
+ ret = fec_enet_clk_enable(ndev, true);
if (ret)
goto failed_clk;
- ret = clk_prepare_enable(fep->clk_ipg);
- if (ret)
- goto failed_clk_ipg;
-
- if (fep->clk_enet_out) {
- ret = clk_prepare_enable(fep->clk_enet_out);
- if (ret)
- goto failed_clk_enet_out;
- }
-
- if (fep->clk_ptp) {
- ret = clk_prepare_enable(fep->clk_ptp);
- if (ret)
- goto failed_clk_ptp;
- }
-
fep->reg_phy = devm_regulator_get(&pdev->dev, "phy");
if (!IS_ERR(fep->reg_phy)) {
ret = regulator_enable(fep->reg_phy);
@@ -2225,6 +2257,7 @@ fec_probe(struct platform_device *pdev)
/* Carrier starts down, phylib will bring it up */
netif_carrier_off(ndev);
+ fec_enet_clk_enable(ndev, false);
ret = register_netdev(ndev);
if (ret)
@@ -2244,15 +2277,7 @@ failed_init:
if (fep->reg_phy)
regulator_disable(fep->reg_phy);
failed_regulator:
- if (fep->clk_ptp)
- clk_disable_unprepare(fep->clk_ptp);
-failed_clk_ptp:
- if (fep->clk_enet_out)
- clk_disable_unprepare(fep->clk_enet_out);
-failed_clk_enet_out:
- clk_disable_unprepare(fep->clk_ipg);
-failed_clk_ipg:
- clk_disable_unprepare(fep->clk_ahb);
+ fec_enet_clk_enable(ndev, false);
failed_clk:
failed_ioremap:
free_netdev(ndev);
@@ -2272,14 +2297,9 @@ fec_drv_remove(struct platform_device *pdev)
del_timer_sync(&fep->time_keep);
if (fep->reg_phy)
regulator_disable(fep->reg_phy);
- if (fep->clk_ptp)
- clk_disable_unprepare(fep->clk_ptp);
if (fep->ptp_clock)
ptp_clock_unregister(fep->ptp_clock);
- if (fep->clk_enet_out)
- clk_disable_unprepare(fep->clk_enet_out);
- clk_disable_unprepare(fep->clk_ipg);
- clk_disable_unprepare(fep->clk_ahb);
+ fec_enet_clk_enable(ndev, false);
free_netdev(ndev);
return 0;
@@ -2296,12 +2316,7 @@ fec_suspend(struct device *dev)
fec_stop(ndev);
netif_device_detach(ndev);
}
- if (fep->clk_ptp)
- clk_disable_unprepare(fep->clk_ptp);
- if (fep->clk_enet_out)
- clk_disable_unprepare(fep->clk_enet_out);
- clk_disable_unprepare(fep->clk_ipg);
- clk_disable_unprepare(fep->clk_ahb);
+ fec_enet_clk_enable(ndev, false);
if (fep->reg_phy)
regulator_disable(fep->reg_phy);
@@ -2322,25 +2337,9 @@ fec_resume(struct device *dev)
return ret;
}
- ret = clk_prepare_enable(fep->clk_ahb);
- if (ret)
- goto failed_clk_ahb;
-
- ret = clk_prepare_enable(fep->clk_ipg);
+ ret = fec_enet_clk_enable(ndev, true);
if (ret)
- goto failed_clk_ipg;
-
- if (fep->clk_enet_out) {
- ret = clk_prepare_enable(fep->clk_enet_out);
- if (ret)
- goto failed_clk_enet_out;
- }
-
- if (fep->clk_ptp) {
- ret = clk_prepare_enable(fep->clk_ptp);
- if (ret)
- goto failed_clk_ptp;
- }
+ goto failed_clk;
if (netif_running(ndev)) {
fec_restart(ndev, fep->full_duplex);
@@ -2349,14 +2348,7 @@ fec_resume(struct device *dev)
return 0;
-failed_clk_ptp:
- if (fep->clk_enet_out)
- clk_disable_unprepare(fep->clk_enet_out);
-failed_clk_enet_out:
- clk_disable_unprepare(fep->clk_ipg);
-failed_clk_ipg:
- clk_disable_unprepare(fep->clk_ahb);
-failed_clk_ahb:
+failed_clk:
if (fep->reg_phy)
regulator_disable(fep->reg_phy);
return ret;
--
1.7.8
next reply other threads:[~2014-05-20 6:41 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-20 5:22 Fugang Duan [this message]
2014-05-20 13:21 ` [PATCH 1/2] net: fec: optimize the clock management to save power Frank.Li
2014-05-22 19:03 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1400563371-3359-1-git-send-email-b38611@freescale.com \
--to=b38611@freescale.com \
--cc=b20596@freescale.com \
--cc=bhutchings@solarflare.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=stephen@networkplumber.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).