From mboxrd@z Thu Jan 1 00:00:00 1970 From: Paul Bolle Subject: [PATCH] arcnet: remove check for CONFIG_SA1100_CT6001 Date: Tue, 27 May 2014 21:53:44 +0200 Message-ID: <1401220424.28714.17.camel@x220> Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit To: netdev@vger.kernel.org, linux-kernel@vger.kernel.org Return-path: Sender: linux-kernel-owner@vger.kernel.org List-Id: netdev.vger.kernel.org A check for CONFIG_SA1100_CT6001 was added in v2.6.11. But the related Kconfig symbol was never added to the tree. Remove this check and do some related cleaning up. Signed-off-by: Paul Bolle --- Entirely untested. arcnet was new for me (as are a lot of things). So I did a rather wide search of Red Hat's (and Fedora's) bugzilla. I got no hit that suggested anyone, ever, used arcnet. Is there any indication that people still care about arcnet? include/linux/com20020.h | 29 +++++++++++------------------ 1 file changed, 11 insertions(+), 18 deletions(-) diff --git a/include/linux/com20020.h b/include/linux/com20020.h index 5dcfb944b6ce..c35e864b1ada 100644 --- a/include/linux/com20020.h +++ b/include/linux/com20020.h @@ -35,24 +35,17 @@ extern const struct net_device_ops com20020_netdev_ops; #define ARCNET_TOTAL_SIZE 8 /* various register addresses */ -#ifdef CONFIG_SA1100_CT6001 -#define BUS_ALIGN 2 /* 8 bit device on a 16 bit bus - needs padding */ -#else -#define BUS_ALIGN 1 -#endif - - -#define _INTMASK (ioaddr+BUS_ALIGN*0) /* writable */ -#define _STATUS (ioaddr+BUS_ALIGN*0) /* readable */ -#define _COMMAND (ioaddr+BUS_ALIGN*1) /* standard arcnet commands */ -#define _DIAGSTAT (ioaddr+BUS_ALIGN*1) /* diagnostic status register */ -#define _ADDR_HI (ioaddr+BUS_ALIGN*2) /* control registers for IO-mapped memory */ -#define _ADDR_LO (ioaddr+BUS_ALIGN*3) -#define _MEMDATA (ioaddr+BUS_ALIGN*4) /* data port for IO-mapped memory */ -#define _SUBADR (ioaddr+BUS_ALIGN*5) /* the extended port _XREG refers to */ -#define _CONFIG (ioaddr+BUS_ALIGN*6) /* configuration register */ -#define _XREG (ioaddr+BUS_ALIGN*7) /* extra registers (indexed by _CONFIG - or _SUBADR) */ +#define _INTMASK (ioaddr+0) /* writable */ +#define _STATUS (ioaddr+0) /* readable */ +#define _COMMAND (ioaddr+1) /* standard arcnet commands */ +#define _DIAGSTAT (ioaddr+1) /* diagnostic status register */ +#define _ADDR_HI (ioaddr+2) /* control registers for IO-mapped memory */ +#define _ADDR_LO (ioaddr+3) +#define _MEMDATA (ioaddr+4) /* data port for IO-mapped memory */ +#define _SUBADR (ioaddr+5) /* the extended port _XREG refers to */ +#define _CONFIG (ioaddr+6) /* configuration register */ +#define _XREG (ioaddr+7) /* extra registers (indexed by _CONFIG + or _SUBADR) */ /* in the ADDR_HI register */ #define RDDATAflag 0x80 /* next access is a read (not a write) */ -- 1.9.3