From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Neerav Parikh <neerav.parikh@intel.com>,
netdev@vger.kernel.org, gospo@redhat.com, sassmann@redhat.com,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next 07/15] i40e: Separate out DCB capability and enabled flags
Date: Wed, 11 Jun 2014 09:33:16 -0700 [thread overview]
Message-ID: <1402504404-8954-8-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <1402504404-8954-1-git-send-email-jeffrey.t.kirsher@intel.com>
From: Neerav Parikh <neerav.parikh@intel.com>
Currently if the firmware reports DCB capability the driver enables
I40E_FLAG_DCB_ENABLED flag. When this flag is enabled the driver
inserts a tag when transmitting a packet from the port even if there
are no DCB traffic classes configured at the port.
This patch adds a new flag I40E_FLAG_DCB_CAPABLE that will be set
when the DCB capability is present and the existing flag
I40E_FLAG_DCB_ENABLED will be set only if there are more than one
traffic classes configured at the port.
Change-ID: I24ccbf53ef293db2eba80c8a9772acf729795bd5
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/i40e/i40e.h | 1 +
drivers/net/ethernet/intel/i40e/i40e_dcb_nl.c | 4 ++--
drivers/net/ethernet/intel/i40e/i40e_main.c | 30 ++++++++++++++++++++-------
3 files changed, 25 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index fc1bd10..5a8bbaa 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -264,6 +264,7 @@ struct i40e_pf {
#ifdef CONFIG_I40E_VXLAN
#define I40E_FLAG_VXLAN_FILTER_SYNC (u64)(1 << 27)
#endif
+#define I40E_FLAG_DCB_CAPABLE (u64)(1 << 29)
/* tracks features that get auto disabled by errors */
u64 auto_disable_flags;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_dcb_nl.c b/drivers/net/ethernet/intel/i40e/i40e_dcb_nl.c
index 871831a..00bc0cd 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_dcb_nl.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_dcb_nl.c
@@ -302,8 +302,8 @@ void i40e_dcbnl_setup(struct i40e_vsi *vsi)
struct net_device *dev = vsi->netdev;
struct i40e_pf *pf = i40e_netdev_to_pf(dev);
- /* DCB not enabled */
- if (!(pf->flags & I40E_FLAG_DCB_ENABLED))
+ /* Not DCB capable */
+ if (!(pf->flags & I40E_FLAG_DCB_CAPABLE))
return;
/* Do not setup DCB NL ops for MFP mode */
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 145cb9f..676bebb 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -4130,7 +4130,11 @@ static int i40e_init_pf_dcb(struct i40e_pf *pf)
/* When status is not DISABLED then DCBX in FW */
pf->dcbx_cap = DCB_CAP_DCBX_LLD_MANAGED |
DCB_CAP_DCBX_VER_IEEE;
- pf->flags |= I40E_FLAG_DCB_ENABLED;
+
+ pf->flags |= I40E_FLAG_DCB_CAPABLE;
+ /* Enable DCB tagging only when more than one TC */
+ if (i40e_dcb_get_num_tc(&hw->local_dcbx_config) > 1)
+ pf->flags |= I40E_FLAG_DCB_ENABLED;
}
} else {
dev_info(&pf->pdev->dev, "AQ Querying DCB configuration failed: %d\n",
@@ -4685,6 +4689,10 @@ static int i40e_handle_lldp_event(struct i40e_pf *pf,
int ret = 0;
u8 type;
+ /* Not DCB capable or capability disabled */
+ if (!(pf->flags & I40E_FLAG_DCB_CAPABLE))
+ return ret;
+
/* Ignore if event is not for Nearest Bridge */
type = ((mib->type >> I40E_AQ_LLDP_BRIDGE_TYPE_SHIFT)
& I40E_AQ_LLDP_BRIDGE_TYPE_MASK);
@@ -4726,6 +4734,12 @@ static int i40e_handle_lldp_event(struct i40e_pf *pf,
if (!need_reconfig)
goto exit;
+ /* Enable DCB tagging only when more than one TC */
+ if (i40e_dcb_get_num_tc(dcbx_cfg) > 1)
+ pf->flags |= I40E_FLAG_DCB_ENABLED;
+ else
+ pf->flags &= ~I40E_FLAG_DCB_ENABLED;
+
/* Reconfiguration needed quiesce all VSIs */
i40e_pf_quiesce_all_vsi(pf);
@@ -6365,7 +6379,7 @@ static void i40e_init_interrupt_scheme(struct i40e_pf *pf)
if (err) {
pf->flags &= ~(I40E_FLAG_MSIX_ENABLED |
I40E_FLAG_RSS_ENABLED |
- I40E_FLAG_DCB_ENABLED |
+ I40E_FLAG_DCB_CAPABLE |
I40E_FLAG_SRIOV_ENABLED |
I40E_FLAG_FD_SB_ENABLED |
I40E_FLAG_FD_ATR_ENABLED |
@@ -8187,13 +8201,13 @@ static void i40e_determine_queue_usage(struct i40e_pf *pf)
pf->flags &= ~(I40E_FLAG_RSS_ENABLED |
I40E_FLAG_FD_SB_ENABLED |
I40E_FLAG_FD_ATR_ENABLED |
- I40E_FLAG_DCB_ENABLED |
+ I40E_FLAG_DCB_CAPABLE |
I40E_FLAG_SRIOV_ENABLED |
I40E_FLAG_VMDQ_ENABLED);
} else if (!(pf->flags & (I40E_FLAG_RSS_ENABLED |
I40E_FLAG_FD_SB_ENABLED |
I40E_FLAG_FD_ATR_ENABLED |
- I40E_FLAG_DCB_ENABLED))) {
+ I40E_FLAG_DCB_CAPABLE))) {
/* one qp for PF */
pf->rss_size = pf->num_lan_qps = 1;
queues_left -= pf->num_lan_qps;
@@ -8205,9 +8219,9 @@ static void i40e_determine_queue_usage(struct i40e_pf *pf)
I40E_FLAG_VMDQ_ENABLED);
} else {
/* Not enough queues for all TCs */
- if ((pf->flags & I40E_FLAG_DCB_ENABLED) &&
+ if ((pf->flags & I40E_FLAG_DCB_CAPABLE) &&
(queues_left < I40E_MAX_TRAFFIC_CLASS)) {
- pf->flags &= ~I40E_FLAG_DCB_ENABLED;
+ pf->flags &= ~I40E_FLAG_DCB_CAPABLE;
dev_info(&pf->pdev->dev, "not enough queues for DCB. DCB is disabled.\n");
}
pf->num_lan_qps = pf->rss_size_max;
@@ -8300,7 +8314,7 @@ static void i40e_print_features(struct i40e_pf *pf)
buf += sprintf(buf, "FD_SB ");
buf += sprintf(buf, "NTUPLE ");
}
- if (pf->flags & I40E_FLAG_DCB_ENABLED)
+ if (pf->flags & I40E_FLAG_DCB_CAPABLE)
buf += sprintf(buf, "DCB ");
if (pf->flags & I40E_FLAG_PTP)
buf += sprintf(buf, "PTP ");
@@ -8486,7 +8500,7 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
err = i40e_init_pf_dcb(pf);
if (err) {
dev_info(&pdev->dev, "init_pf_dcb failed: %d\n", err);
- pf->flags &= ~I40E_FLAG_DCB_ENABLED;
+ pf->flags &= ~I40E_FLAG_DCB_CAPABLE;
/* Continue without DCB enabled */
}
#endif /* CONFIG_I40E_DCB */
--
1.9.3
next prev parent reply other threads:[~2014-06-11 16:33 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-11 16:33 [net-next 00/15][pull request] Intel Wired LAN Driver Updates 2014-06-11 Jeff Kirsher
2014-06-11 16:33 ` [net-next 01/15] igb: unhide invariant returns Jeff Kirsher
2014-06-11 16:33 ` [net-next 02/15] igb: separate hardware setting from the set_ts_config ioctl Jeff Kirsher
2014-06-11 16:33 ` [net-next 03/15] i40e/i40evf: set headwb Tx context flags and use them Jeff Kirsher
2014-06-11 16:33 ` [net-next 04/15] i40e/i40evf: AdminQ API update for new FW Jeff Kirsher
2014-06-11 16:33 ` [net-next 05/15] i40e: Change the notion of src and dst for FD_SB in ethtool Jeff Kirsher
2014-06-11 16:33 ` [net-next 06/15] i40evf: don't go further down Jeff Kirsher
2014-06-11 16:33 ` Jeff Kirsher [this message]
2014-06-12 8:22 ` [net-next 07/15] i40e: Separate out DCB capability and enabled flags Or Gerlitz
2014-06-12 16:59 ` Parikh, Neerav
2014-06-11 16:33 ` [net-next 08/15] i40e: Do not accept tagged packets by default Jeff Kirsher
2014-06-11 16:33 ` [net-next 09/15] i40e/i40evf: User ether_addr_copy instead of memcpy Jeff Kirsher
2014-06-11 16:33 ` [net-next 10/15] i40evf: check admin queue error bits Jeff Kirsher
2014-06-11 16:33 ` [net-next 11/15] i40e/i40evf: remove FTYPE Jeff Kirsher
2014-06-11 16:33 ` [net-next 12/15] i40e/i40evf: Add Flow director stats to PF stats Jeff Kirsher
2014-06-11 16:33 ` [net-next 13/15] i40e: Fix a bug in ethtool for FD drop packet filter action Jeff Kirsher
2014-06-11 16:33 ` [net-next 14/15] i40e: use stored base_queue value Jeff Kirsher
2014-06-11 16:33 ` [net-next 15/15] i40e/i40evf: Bump i40e to version 0.4.10 and i40evf to 0.9.34 Jeff Kirsher
2014-06-11 19:25 ` [net-next 00/15][pull request] Intel Wired LAN Driver Updates 2014-06-11 David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1402504404-8954-8-git-send-email-jeffrey.t.kirsher@intel.com \
--to=jeffrey.t.kirsher@intel.com \
--cc=davem@davemloft.net \
--cc=gospo@redhat.com \
--cc=neerav.parikh@intel.com \
--cc=netdev@vger.kernel.org \
--cc=sassmann@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).