[PATCH net-next v2 08/11] net: bcmgenet: handle UMAC_IRQ_MPD_R interrupt bit

[Florian Fainelli <f.fainelli@gmail.com>]

Handle UMAC_IRQ_MPD_R interrupt bit in our workqueue to make sure that
we properly re-configure the GENET adapter from Wake-on-LAN.

bcmgenet_power_up() makes sure that we will not leave the UniMAC
hardware in MagicPacket matching mode, since that would prevent any
other packet from being received.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index f5118f4cccf3..319b94381d2e 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -1836,6 +1836,13 @@ static void bcmgenet_irq_task(struct work_struct *work)
 
 	netif_dbg(priv, intr, priv->dev, "%s\n", __func__);
 
+	if (priv->irq0_stat & UMAC_IRQ_MPD_R) {
+		priv->irq0_stat &= ~UMAC_IRQ_MPD_R;
+		netif_dbg(priv, wol, priv->dev,
+			  "magic packet detected, waking up\n");
+		bcmgenet_power_up(priv, GENET_POWER_WOL_MAGIC);
+	}
+
 	/* Link UP/DOWN event */
 	if ((priv->hw_params->flags & GENET_HAS_MDIO_INTR) &&
 		(priv->irq0_stat & (UMAC_IRQ_LINK_UP|UMAC_IRQ_LINK_DOWN))) {
-- 
1.9.1