From: Oliver Neukum <oneukum@suse.de>
To: davem@davemloft.net, netdev@vger.kernel.org
Cc: Oliver Neukum <oneukum@suse.de>
Subject: [PATCH] cdc_subset: deal with a device that needs reset for timeout
Date: Fri, 1 Aug 2014 14:01:51 +0200 [thread overview]
Message-ID: <1406894511-26808-1-git-send-email-oneukum@suse.de> (raw)
This device needs to be reset to recover from a timeout.
Unfortunately this can be handled only at the level of
the subdrivers.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
---
drivers/net/usb/cdc_subset.c | 27 ++++++++++++++++++++++++++-
drivers/net/usb/usbnet.c | 8 ++++++--
include/linux/usb/usbnet.h | 3 +++
3 files changed, 35 insertions(+), 3 deletions(-)
diff --git a/drivers/net/usb/cdc_subset.c b/drivers/net/usb/cdc_subset.c
index 91f0919..6ea98cf 100644
--- a/drivers/net/usb/cdc_subset.c
+++ b/drivers/net/usb/cdc_subset.c
@@ -85,14 +85,28 @@ static int always_connected (struct usbnet *dev)
*
*-------------------------------------------------------------------------*/
+static void m5632_recover(struct usbnet *dev)
+{
+ struct usb_device *udev = dev->udev;
+ struct usb_interface *intf = dev->intf;
+ int r;
+
+ r = usb_lock_device_for_reset(udev, intf);
+ if (r < 0)
+ return;
+
+ usb_reset_device(udev);
+ usb_unlock_device(udev);
+}
+
static const struct driver_info ali_m5632_info = {
.description = "ALi M5632",
.flags = FLAG_POINTTOPOINT,
+ .recover = m5632_recover,
};
#endif
-\f
#ifdef CONFIG_USB_AN2720
#define HAVE_HARDWARE
@@ -326,12 +340,23 @@ static const struct usb_device_id products [] = {
MODULE_DEVICE_TABLE(usb, products);
/*-------------------------------------------------------------------------*/
+static int dummy_prereset(struct usb_interface *intf)
+{
+ return 0;
+}
+
+static int dummy_postreset(struct usb_interface *intf)
+{
+ return 0;
+}
static struct usb_driver cdc_subset_driver = {
.name = "cdc_subset",
.probe = usbnet_probe,
.suspend = usbnet_suspend,
.resume = usbnet_resume,
+ .pre_reset = dummy_prereset,
+ .post_reset = dummy_postreset,
.disconnect = usbnet_disconnect,
.id_table = products,
.disable_hub_initiated_lpm = 1,
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index f9e96c4..5173821 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -1218,8 +1218,12 @@ void usbnet_tx_timeout (struct net_device *net)
unlink_urbs (dev, &dev->txq);
tasklet_schedule (&dev->bh);
-
- // FIXME: device recovery -- reset?
+ /* this needs to be handled individually because the generic layer
+ * doesn't know what is sufficient and could not restore private
+ * information if a remedy of an unconditional reset were used.
+ */
+ if (dev->driver_info->recover)
+ (dev->driver_info->recover)(dev);
}
EXPORT_SYMBOL_GPL(usbnet_tx_timeout);
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
index 0662e98..26088fe 100644
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@@ -148,6 +148,9 @@ struct driver_info {
struct sk_buff *(*tx_fixup)(struct usbnet *dev,
struct sk_buff *skb, gfp_t flags);
+ /* recover from timeout */
+ void (*recover)(struct usbnet *dev);
+
/* early initialization code, can sleep. This is for minidrivers
* having 'subminidrivers' that need to do extra initialization
* right after minidriver have initialized hardware. */
--
1.8.4.5
next reply other threads:[~2014-08-01 12:01 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-01 12:01 Oliver Neukum [this message]
2014-08-02 22:44 ` [PATCH] cdc_subset: deal with a device that needs reset for timeout David Miller
-- strict thread matches above, loose matches on Subject: below --
2014-07-28 8:12 Oliver Neukum
2014-07-29 19:22 ` David Miller
2014-07-24 11:59 Oliver Neukum
2014-07-28 5:31 ` David Miller
2014-07-28 8:13 ` Oliver Neukum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1406894511-26808-1-git-send-email-oneukum@suse.de \
--to=oneukum@suse.de \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).