From mboxrd@z Thu Jan 1 00:00:00 1970 From: Florian Fainelli Subject: [PATCH net-next v2 00/12] dsa: support for Broadcom Starfighter 2 Date: Tue, 5 Aug 2014 15:31:34 -0700 Message-ID: <1407277906-19989-1-git-send-email-f.fainelli@gmail.com> Cc: davem@davemloft.net, linville@tuxdriver.com, Florian Fainelli To: netdev@vger.kernel.org Return-path: Received: from mail-pa0-f52.google.com ([209.85.220.52]:48236 "EHLO mail-pa0-f52.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752866AbaHEWcF (ORCPT ); Tue, 5 Aug 2014 18:32:05 -0400 Received: by mail-pa0-f52.google.com with SMTP id bj1so2201102pad.39 for ; Tue, 05 Aug 2014 15:32:04 -0700 (PDT) Sender: netdev-owner@vger.kernel.org List-ID: Hi all, This patch series adds support for the Broadcom Starfighter 2 (Roboswitch successor) using the existing DSA infrastructure. This integrated switch is heavily used in Set Top Box, Cable gateways and DSL gateways products from Broadcom, and to a larger extend the new ARM-based Wi-Fi routers although slightly differently. The biggest changes from v1 of this patch series are: - use the new fixed PHY helpers - improved the switch driver with more complete features (interrupts, (RG)MII configuration, memory arrays power down/up, port disabling/enable VLAN separation Future work will focus on bringing the upstream driver in feature parity with the current downstream driver, including: - adding Wake-on-LAN support to the switch - adding suspend/resume callbacks for S2/S3 Power Management modes - extending the switch register interface to cover BCM5310X SoCs Thanks! Florian Fainelli (12): net: phy: add generic UniMAC MDIO bus driver net: dsa: add Broadcom tag hook net: dsa: provide a switch device device tree node pointer net: dsa: retain a per-port device_node pointer net: dsa: allow for more complex PHY setups net: dsa: allow switches to work without tagging net: dsa: allow drivers to do link adjustment net: dsa: allow updating fixed PHY link information net: dsa: add Broadcom tag RX/TX handler net: dsa: add Broadcom SF2 switch driver Documentation: devicetree: update dsa binding with optional properties Documentation: devicetree: add Broadcom Starfighter 2 binding .../bindings/net/broadcom-mdio-unimac.txt | 39 ++ .../devicetree/bindings/net/broadcom-sf2.txt | 78 +++ Documentation/devicetree/bindings/net/dsa/dsa.txt | 17 + drivers/net/dsa/Kconfig | 11 + drivers/net/dsa/Makefile | 1 + drivers/net/dsa/bcm_sf2.c | 626 +++++++++++++++++++++ drivers/net/dsa/bcm_sf2.h | 139 +++++ drivers/net/dsa/bcm_sf2_regs.h | 228 ++++++++ drivers/net/phy/Kconfig | 6 + drivers/net/phy/Makefile | 1 + drivers/net/phy/mdio-bcm-unimac.c | 212 +++++++ include/linux/netdevice.h | 10 + include/net/dsa.h | 24 + include/uapi/linux/if_ether.h | 1 + net/dsa/Kconfig | 3 + net/dsa/Makefile | 1 + net/dsa/dsa.c | 15 + net/dsa/dsa_priv.h | 8 + net/dsa/slave.c | 153 ++++- net/dsa/tag_brcm.c | 170 ++++++ net/ethernet/eth.c | 2 + 21 files changed, 1738 insertions(+), 7 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/broadcom-mdio-unimac.txt create mode 100644 Documentation/devicetree/bindings/net/broadcom-sf2.txt create mode 100644 drivers/net/dsa/bcm_sf2.c create mode 100644 drivers/net/dsa/bcm_sf2.h create mode 100644 drivers/net/dsa/bcm_sf2_regs.h create mode 100644 drivers/net/phy/mdio-bcm-unimac.c create mode 100644 net/dsa/tag_brcm.c -- 1.9.1