netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Shahed Shaikh <shahed.shaikh@qlogic.com>
To: <davem@davemloft.net>
Cc: <netdev@vger.kernel.org>, <Dept-HSGLinuxNICDev@qlogic.com>,
	Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Subject: [PATCH net 1/3] qlcnic: Fix flash access interface to application
Date: Mon, 18 Aug 2014 09:31:53 -0400	[thread overview]
Message-ID: <1408368715-8048-2-git-send-email-shahed.shaikh@qlogic.com> (raw)
In-Reply-To: <1408368715-8048-1-git-send-email-shahed.shaikh@qlogic.com>

From: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>

Application expects flash data in little endian, but driver reads/writes
flash data using readl()/writel() APIs which swaps data on big endian machine.
So, swap the data after reading from and before writing to flash memory.

Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic.h        |   15 ++++++++++++++-
 .../net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c    |    6 +++---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c  |   16 +++++++++++++++-
 3 files changed, 32 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
index 16039d1..b84f5ea 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
@@ -268,7 +268,7 @@ struct qlcnic_fdt {
 	u16	cksum;
 	u16	unused;
 	u8	model[16];
-	u16	mfg_id;
+	u8	mfg_id;
 	u16	id;
 	u8	flag;
 	u8	erase_cmd;
@@ -2362,6 +2362,19 @@ static inline u32 qlcnic_get_vnic_func_count(struct qlcnic_adapter *adapter)
 		return QLC_DEFAULT_VNIC_COUNT;
 }
 
+static inline void qlcnic_swap32_buffer(u32 *buffer, int count)
+{
+#if defined(__BIG_ENDIAN)
+	u32 *tmp = buffer;
+	int i;
+
+	for (i = 0; i < count; i++) {
+		*tmp = swab32(*tmp);
+		tmp++;
+	}
+#endif
+}
+
 #ifdef CONFIG_QLCNIC_HWMON
 void qlcnic_register_hwmon_dev(struct qlcnic_adapter *);
 void qlcnic_unregister_hwmon_dev(struct qlcnic_adapter *);
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
index a4a4ec0..476e499 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
@@ -2603,7 +2603,7 @@ int qlcnic_83xx_lockless_flash_read32(struct qlcnic_adapter *adapter,
 	}
 
 	qlcnic_83xx_wrt_reg_indirect(adapter, QLC_83XX_FLASH_DIRECT_WINDOW,
-				     (addr));
+				     (addr & 0xFFFF0000));
 
 	range = flash_offset + (count * sizeof(u32));
 	/* Check if data is spread across multiple sectors */
@@ -2753,7 +2753,7 @@ int qlcnic_83xx_read_flash_descriptor_table(struct qlcnic_adapter *adapter)
 	ret = qlcnic_83xx_lockless_flash_read32(adapter, QLCNIC_FDT_LOCATION,
 						(u8 *)&adapter->ahw->fdt,
 						count);
-
+	qlcnic_swap32_buffer((u32 *)&adapter->ahw->fdt, count);
 	qlcnic_83xx_unlock_flash(adapter);
 	return ret;
 }
@@ -2788,7 +2788,7 @@ int qlcnic_83xx_erase_flash_sector(struct qlcnic_adapter *adapter,
 
 	addr1 = (sector_start_addr & 0xFF) << 16;
 	addr2 = (sector_start_addr & 0xFF0000) >> 16;
-	reversed_addr = addr1 | addr2;
+	reversed_addr = addr1 | addr2 | (sector_start_addr & 0xFF00);
 
 	qlcnic_83xx_wrt_reg_indirect(adapter, QLC_83XX_FLASH_WRDATA,
 				     reversed_addr);
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c
index f5786d5..59a721f 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c
@@ -280,6 +280,7 @@ static ssize_t qlcnic_sysfs_read_crb(struct file *filp, struct kobject *kobj,
 	if (ret != 0)
 		return ret;
 	qlcnic_read_crb(adapter, buf, offset, size);
+	qlcnic_swap32_buffer((u32 *)buf, size / sizeof(u32));
 
 	return size;
 }
@@ -296,6 +297,7 @@ static ssize_t qlcnic_sysfs_write_crb(struct file *filp, struct kobject *kobj,
 	if (ret != 0)
 		return ret;
 
+	qlcnic_swap32_buffer((u32 *)buf, size / sizeof(u32));
 	qlcnic_write_crb(adapter, buf, offset, size);
 	return size;
 }
@@ -329,6 +331,7 @@ static ssize_t qlcnic_sysfs_read_mem(struct file *filp, struct kobject *kobj,
 		return -EIO;
 
 	memcpy(buf, &data, size);
+	qlcnic_swap32_buffer((u32 *)buf, size / sizeof(u32));
 
 	return size;
 }
@@ -346,6 +349,7 @@ static ssize_t qlcnic_sysfs_write_mem(struct file *filp, struct kobject *kobj,
 	if (ret != 0)
 		return ret;
 
+	qlcnic_swap32_buffer((u32 *)buf, size / sizeof(u32));
 	memcpy(&data, buf, size);
 
 	if (qlcnic_pci_mem_write_2M(adapter, offset, data))
@@ -412,6 +416,7 @@ static ssize_t qlcnic_sysfs_write_pm_config(struct file *filp,
 	if (rem)
 		return QL_STATUS_INVALID_PARAM;
 
+	qlcnic_swap32_buffer((u32 *)buf, size / sizeof(u32));
 	pm_cfg = (struct qlcnic_pm_func_cfg *)buf;
 	ret = validate_pm_config(adapter, pm_cfg, count);
 
@@ -474,6 +479,7 @@ static ssize_t qlcnic_sysfs_read_pm_config(struct file *filp,
 		pm_cfg[pci_func].dest_npar = 0;
 		pm_cfg[pci_func].pci_func = i;
 	}
+	qlcnic_swap32_buffer((u32 *)buf, size / sizeof(u32));
 	return size;
 }
 
@@ -555,6 +561,7 @@ static ssize_t qlcnic_sysfs_write_esw_config(struct file *file,
 	if (rem)
 		return QL_STATUS_INVALID_PARAM;
 
+	qlcnic_swap32_buffer((u32 *)buf, size / sizeof(u32));
 	esw_cfg = (struct qlcnic_esw_func_cfg *)buf;
 	ret = validate_esw_config(adapter, esw_cfg, count);
 	if (ret)
@@ -649,6 +656,7 @@ static ssize_t qlcnic_sysfs_read_esw_config(struct file *file,
 		if (qlcnic_get_eswitch_port_config(adapter, &esw_cfg[pci_func]))
 			return QL_STATUS_INVALID_PARAM;
 	}
+	qlcnic_swap32_buffer((u32 *)buf, size / sizeof(u32));
 	return size;
 }
 
@@ -688,6 +696,7 @@ static ssize_t qlcnic_sysfs_write_npar_config(struct file *file,
 	if (rem)
 		return QL_STATUS_INVALID_PARAM;
 
+	qlcnic_swap32_buffer((u32 *)buf, size / sizeof(u32));
 	np_cfg = (struct qlcnic_npar_func_cfg *)buf;
 	ret = validate_npar_config(adapter, np_cfg, count);
 	if (ret)
@@ -759,6 +768,7 @@ static ssize_t qlcnic_sysfs_read_npar_config(struct file *file,
 		np_cfg[pci_func].max_tx_queues = nic_info.max_tx_ques;
 		np_cfg[pci_func].max_rx_queues = nic_info.max_rx_ques;
 	}
+	qlcnic_swap32_buffer((u32 *)buf, size / sizeof(u32));
 	return size;
 }
 
@@ -916,6 +926,7 @@ static ssize_t qlcnic_sysfs_read_pci_config(struct file *file,
 
 	pci_cfg = (struct qlcnic_pci_func_cfg *)buf;
 	count = size / sizeof(struct qlcnic_pci_func_cfg);
+	qlcnic_swap32_buffer((u32 *)pci_info, size / sizeof(u32));
 	for (i = 0; i < count; i++) {
 		pci_cfg[i].pci_func = pci_info[i].id;
 		pci_cfg[i].func_type = pci_info[i].type;
@@ -969,6 +980,7 @@ static ssize_t qlcnic_83xx_sysfs_flash_read_handler(struct file *filp,
 	}
 
 	qlcnic_83xx_unlock_flash(adapter);
+	qlcnic_swap32_buffer((u32 *)p_read_buf, count);
 	memcpy(buf, p_read_buf, size);
 	kfree(p_read_buf);
 
@@ -986,9 +998,10 @@ static int qlcnic_83xx_sysfs_flash_bulk_write(struct qlcnic_adapter *adapter,
 	if (!p_cache)
 		return -ENOMEM;
 
+	count = size / sizeof(u32);
+	qlcnic_swap32_buffer((u32 *)buf, count);
 	memcpy(p_cache, buf, size);
 	p_src = p_cache;
-	count = size / sizeof(u32);
 
 	if (qlcnic_83xx_lock_flash(adapter) != 0) {
 		kfree(p_cache);
@@ -1053,6 +1066,7 @@ static int qlcnic_83xx_sysfs_flash_write(struct qlcnic_adapter *adapter,
 	if (!p_cache)
 		return -ENOMEM;
 
+	qlcnic_swap32_buffer((u32 *)buf, size / sizeof(u32));
 	memcpy(p_cache, buf, size);
 	p_src = p_cache;
 	count = size / sizeof(u32);
-- 
1.5.6

  reply	other threads:[~2014-08-18 14:04 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-18 13:31 [PATCH net 0/3] qlcnic: Bug fixes Shahed Shaikh
2014-08-18 13:31 ` Shahed Shaikh [this message]
2014-08-18 13:31 ` [PATCH net 2/3] qlcnic: Fix endianess issue in FW dump template header Shahed Shaikh
2014-08-18 13:31 ` [PATCH net 3/3] qlcnic: Fix endianess issue in firmware load from file operation Shahed Shaikh
2014-08-22  0:43 ` [PATCH net 0/3] qlcnic: Bug fixes David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1408368715-8048-2-git-send-email-shahed.shaikh@qlogic.com \
    --to=shahed.shaikh@qlogic.com \
    --cc=Dept-HSGLinuxNICDev@qlogic.com \
    --cc=davem@davemloft.net \
    --cc=jitendra.kalsaria@qlogic.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).