From: Shahed Shaikh <shahed.shaikh@qlogic.com>
To: <davem@davemloft.net>
Cc: <netdev@vger.kernel.org>, <Dept-HSGLinuxNICDev@qlogic.com>,
Rajesh Borundia <rajesh.borundia@qlogic.com>
Subject: [PATCH net 2/3] qlcnic: Fix endianess issue in FW dump template header
Date: Mon, 18 Aug 2014 09:31:54 -0400 [thread overview]
Message-ID: <1408368715-8048-3-git-send-email-shahed.shaikh@qlogic.com> (raw)
In-Reply-To: <1408368715-8048-1-git-send-email-shahed.shaikh@qlogic.com>
From: Rajesh Borundia <rajesh.borundia@qlogic.com>
Firmware dump template header is read from adapter using
readl() which swaps the data. So, adjust structure
element on the boundary of 32bit dword.
Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
---
.../net/ethernet/qlogic/qlcnic/qlcnic_minidump.c | 57 ++++++++++++++++++++
1 files changed, 57 insertions(+), 0 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c
index e46fc39..c9f57fb 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c
@@ -47,15 +47,26 @@ struct qlcnic_common_entry_hdr {
u32 type;
u32 offset;
u32 cap_size;
+#if defined(__LITTLE_ENDIAN)
u8 mask;
u8 rsvd[2];
u8 flags;
+#else
+ u8 flags;
+ u8 rsvd[2];
+ u8 mask;
+#endif
} __packed;
struct __crb {
u32 addr;
+#if defined(__LITTLE_ENDIAN)
u8 stride;
u8 rsvd1[3];
+#else
+ u8 rsvd1[3];
+ u8 stride;
+#endif
u32 data_size;
u32 no_ops;
u32 rsvd2[4];
@@ -63,15 +74,28 @@ struct __crb {
struct __ctrl {
u32 addr;
+#if defined(__LITTLE_ENDIAN)
u8 stride;
u8 index_a;
u16 timeout;
+#else
+ u16 timeout;
+ u8 index_a;
+ u8 stride;
+#endif
u32 data_size;
u32 no_ops;
+#if defined(__LITTLE_ENDIAN)
u8 opcode;
u8 index_v;
u8 shl_val;
u8 shr_val;
+#else
+ u8 shr_val;
+ u8 shl_val;
+ u8 index_v;
+ u8 opcode;
+#endif
u32 val1;
u32 val2;
u32 val3;
@@ -79,16 +103,27 @@ struct __ctrl {
struct __cache {
u32 addr;
+#if defined(__LITTLE_ENDIAN)
u16 stride;
u16 init_tag_val;
+#else
+ u16 init_tag_val;
+ u16 stride;
+#endif
u32 size;
u32 no_ops;
u32 ctrl_addr;
u32 ctrl_val;
u32 read_addr;
+#if defined(__LITTLE_ENDIAN)
u8 read_addr_stride;
u8 read_addr_num;
u8 rsvd1[2];
+#else
+ u8 rsvd1[2];
+ u8 read_addr_num;
+ u8 read_addr_stride;
+#endif
} __packed;
struct __ocm {
@@ -122,23 +157,39 @@ struct __mux {
struct __queue {
u32 sel_addr;
+#if defined(__LITTLE_ENDIAN)
u16 stride;
u8 rsvd[2];
+#else
+ u8 rsvd[2];
+ u16 stride;
+#endif
u32 size;
u32 no_ops;
u8 rsvd2[8];
u32 read_addr;
+#if defined(__LITTLE_ENDIAN)
u8 read_addr_stride;
u8 read_addr_cnt;
u8 rsvd3[2];
+#else
+ u8 rsvd3[2];
+ u8 read_addr_cnt;
+ u8 read_addr_stride;
+#endif
} __packed;
struct __pollrd {
u32 sel_addr;
u32 read_addr;
u32 sel_val;
+#if defined(__LITTLE_ENDIAN)
u16 sel_val_stride;
u16 no_ops;
+#else
+ u16 no_ops;
+ u16 sel_val_stride;
+#endif
u32 poll_wait;
u32 poll_mask;
u32 data_size;
@@ -153,9 +204,15 @@ struct __mux2 {
u32 no_ops;
u32 sel_val_mask;
u32 read_addr;
+#if defined(__LITTLE_ENDIAN)
u8 sel_val_stride;
u8 data_size;
u8 rsvd[2];
+#else
+ u8 rsvd[2];
+ u8 data_size;
+ u8 sel_val_stride;
+#endif
} __packed;
struct __pollrdmwr {
--
1.5.6
next prev parent reply other threads:[~2014-08-18 14:04 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-18 13:31 [PATCH net 0/3] qlcnic: Bug fixes Shahed Shaikh
2014-08-18 13:31 ` [PATCH net 1/3] qlcnic: Fix flash access interface to application Shahed Shaikh
2014-08-18 13:31 ` Shahed Shaikh [this message]
2014-08-18 13:31 ` [PATCH net 3/3] qlcnic: Fix endianess issue in firmware load from file operation Shahed Shaikh
2014-08-22 0:43 ` [PATCH net 0/3] qlcnic: Bug fixes David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1408368715-8048-3-git-send-email-shahed.shaikh@qlogic.com \
--to=shahed.shaikh@qlogic.com \
--cc=Dept-HSGLinuxNICDev@qlogic.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=rajesh.borundia@qlogic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).