From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Shannon Nelson <shannon.nelson@intel.com>,
netdev@vger.kernel.org, nhorman@redhat.com, sassmann@redhat.com,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next 09/11] i40e: quiet complaints when removing default MAC VLAN filter and make set_mac reversible
Date: Wed, 27 Aug 2014 02:26:44 -0700 [thread overview]
Message-ID: <1409131606-15011-10-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <1409131606-15011-1-git-send-email-jeffrey.t.kirsher@intel.com>
From: Shannon Nelson <shannon.nelson@intel.com>
Older firmware has an incorrect MAC VLAN filter that needs to be replaced
at startup, and now newer firmware doesn't have this problem. With this
change we no longer complain if the remove fails, and we only add the
new filter if the remove succeeded.
Setting a new LAA worked the first time, but didn't work well in successive
operations, including returning to the HW default address. This simplifies
the code that was trying to be too smart.
Lastly, this pulls the hardware default mac address out into separate
handling code and keeps the broadcast filtering from getting munged.
Change-ID: I1f54b002def04ffef2546febb9a4044385452f85
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Tested-by: Jim Young <jamesx.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/i40e/i40e_main.c | 99 ++++++++++++++++++++---------
1 file changed, 70 insertions(+), 29 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 172f756..3216aa5 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -1239,8 +1239,11 @@ struct i40e_mac_filter *i40e_put_mac_in_vlan(struct i40e_vsi *vsi, u8 *macaddr,
* i40e_rm_default_mac_filter - Remove the default MAC filter set by NVM
* @vsi: the PF Main VSI - inappropriate for any other VSI
* @macaddr: the MAC address
+ *
+ * Some older firmware configurations set up a default promiscuous VLAN
+ * filter that needs to be removed.
**/
-static void i40e_rm_default_mac_filter(struct i40e_vsi *vsi, u8 *macaddr)
+static int i40e_rm_default_mac_filter(struct i40e_vsi *vsi, u8 *macaddr)
{
struct i40e_aqc_remove_macvlan_element_data element;
struct i40e_pf *pf = vsi->back;
@@ -1248,15 +1251,18 @@ static void i40e_rm_default_mac_filter(struct i40e_vsi *vsi, u8 *macaddr)
/* Only appropriate for the PF main VSI */
if (vsi->type != I40E_VSI_MAIN)
- return;
+ return -EINVAL;
+ memset(&element, 0, sizeof(element));
ether_addr_copy(element.mac_addr, macaddr);
element.vlan_tag = 0;
element.flags = I40E_AQC_MACVLAN_DEL_PERFECT_MATCH |
I40E_AQC_MACVLAN_DEL_IGNORE_VLAN;
aq_ret = i40e_aq_remove_macvlan(&pf->hw, vsi->seid, &element, 1, NULL);
if (aq_ret)
- dev_err(&pf->pdev->dev, "Could not remove default MAC-VLAN\n");
+ return -ENOENT;
+
+ return 0;
}
/**
@@ -1385,18 +1391,30 @@ static int i40e_set_mac(struct net_device *netdev, void *p)
{
struct i40e_netdev_priv *np = netdev_priv(netdev);
struct i40e_vsi *vsi = np->vsi;
+ struct i40e_pf *pf = vsi->back;
+ struct i40e_hw *hw = &pf->hw;
struct sockaddr *addr = p;
struct i40e_mac_filter *f;
if (!is_valid_ether_addr(addr->sa_data))
return -EADDRNOTAVAIL;
- netdev_info(netdev, "set mac address=%pM\n", addr->sa_data);
+ if (ether_addr_equal(netdev->dev_addr, addr->sa_data)) {
+ netdev_info(netdev, "already using mac address %pM\n",
+ addr->sa_data);
+ return 0;
+ }
if (test_bit(__I40E_DOWN, &vsi->back->state) ||
test_bit(__I40E_RESET_RECOVERY_PENDING, &vsi->back->state))
return -EADDRNOTAVAIL;
+ if (ether_addr_equal(hw->mac.addr, addr->sa_data))
+ netdev_info(netdev, "returning to hw mac address %pM\n",
+ hw->mac.addr);
+ else
+ netdev_info(netdev, "set new mac address %pM\n", addr->sa_data);
+
if (vsi->type == I40E_VSI_MAIN) {
i40e_status ret;
ret = i40e_aq_mac_address_write(&vsi->back->hw,
@@ -1410,25 +1428,34 @@ static int i40e_set_mac(struct net_device *netdev, void *p)
}
}
- f = i40e_find_mac(vsi, addr->sa_data, false, true);
- if (!f) {
- /* In order to be sure to not drop any packets, add the
- * new address first then delete the old one.
- */
- f = i40e_add_filter(vsi, addr->sa_data, I40E_VLAN_ANY,
- false, false);
- if (!f)
- return -ENOMEM;
+ if (ether_addr_equal(netdev->dev_addr, hw->mac.addr)) {
+ struct i40e_aqc_remove_macvlan_element_data element;
- i40e_sync_vsi_filters(vsi);
+ memset(&element, 0, sizeof(element));
+ ether_addr_copy(element.mac_addr, netdev->dev_addr);
+ element.flags = I40E_AQC_MACVLAN_DEL_PERFECT_MATCH;
+ i40e_aq_remove_macvlan(&pf->hw, vsi->seid, &element, 1, NULL);
+ } else {
i40e_del_filter(vsi, netdev->dev_addr, I40E_VLAN_ANY,
false, false);
- i40e_sync_vsi_filters(vsi);
}
- f->is_laa = true;
- if (!ether_addr_equal(netdev->dev_addr, addr->sa_data))
- ether_addr_copy(netdev->dev_addr, addr->sa_data);
+ if (ether_addr_equal(addr->sa_data, hw->mac.addr)) {
+ struct i40e_aqc_add_macvlan_element_data element;
+
+ memset(&element, 0, sizeof(element));
+ ether_addr_copy(element.mac_addr, hw->mac.addr);
+ element.flags = cpu_to_le16(I40E_AQC_MACVLAN_ADD_PERFECT_MATCH);
+ i40e_aq_add_macvlan(&pf->hw, vsi->seid, &element, 1, NULL);
+ } else {
+ f = i40e_add_filter(vsi, addr->sa_data, I40E_VLAN_ANY,
+ false, false);
+ if (f)
+ f->is_laa = true;
+ }
+
+ i40e_sync_vsi_filters(vsi);
+ ether_addr_copy(netdev->dev_addr, addr->sa_data);
return 0;
}
@@ -1796,9 +1823,8 @@ int i40e_sync_vsi_filters(struct i40e_vsi *vsi)
kfree(add_list);
add_list = NULL;
- if (add_happened && (!aq_ret)) {
- /* do nothing */;
- } else if (add_happened && (aq_ret)) {
+ if (add_happened && aq_ret &&
+ pf->hw.aq.asq_last_status != I40E_AQ_RC_EINVAL) {
dev_info(&pf->pdev->dev,
"add filter failed, err %d, aq_err %d\n",
aq_ret, pf->hw.aq.asq_last_status);
@@ -7512,14 +7538,14 @@ static int i40e_config_netdev(struct i40e_vsi *vsi)
if (vsi->type == I40E_VSI_MAIN) {
SET_NETDEV_DEV(netdev, &pf->pdev->dev);
ether_addr_copy(mac_addr, hw->mac.perm_addr);
- /* The following two steps are necessary to prevent reception
- * of tagged packets - by default the NVM loads a MAC-VLAN
- * filter that will accept any tagged packet. This is to
- * prevent that during normal operations until a specific
- * VLAN tag filter has been set.
+ /* The following steps are necessary to prevent reception
+ * of tagged packets - some older NVM configurations load a
+ * default a MAC-VLAN filter that accepts any tagged packet
+ * which must be replaced by a normal filter.
*/
- i40e_rm_default_mac_filter(vsi, mac_addr);
- i40e_add_filter(vsi, mac_addr, I40E_VLAN_ANY, false, true);
+ if (!i40e_rm_default_mac_filter(vsi, mac_addr))
+ i40e_add_filter(vsi, mac_addr,
+ I40E_VLAN_ANY, false, true);
} else {
/* relate the VSI_VMDQ name to the VSI_MAIN name */
snprintf(netdev->name, IFNAMSIZ, "%sv%%d",
@@ -7735,7 +7761,22 @@ static int i40e_add_vsi(struct i40e_vsi *vsi)
f_count++;
if (f->is_laa && vsi->type == I40E_VSI_MAIN) {
- i40e_aq_mac_address_write(&vsi->back->hw,
+ struct i40e_aqc_remove_macvlan_element_data element;
+
+ memset(&element, 0, sizeof(element));
+ ether_addr_copy(element.mac_addr, f->macaddr);
+ element.flags = I40E_AQC_MACVLAN_DEL_PERFECT_MATCH;
+ ret = i40e_aq_remove_macvlan(hw, vsi->seid,
+ &element, 1, NULL);
+ if (ret) {
+ /* some older FW has a different default */
+ element.flags |=
+ I40E_AQC_MACVLAN_DEL_IGNORE_VLAN;
+ i40e_aq_remove_macvlan(hw, vsi->seid,
+ &element, 1, NULL);
+ }
+
+ i40e_aq_mac_address_write(hw,
I40E_AQC_WRITE_TYPE_LAA_WOL,
f->macaddr, NULL);
}
--
1.9.3
next prev parent reply other threads:[~2014-08-27 9:26 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-27 9:26 [net-next 00/11][pull request] Intel Wired LAN Driver Updates 2014-08-27 Jeff Kirsher
2014-08-27 9:26 ` [net-next 01/11] i40e: Update flow director error messages to reduce user confusion Jeff Kirsher
2014-08-27 9:26 ` [net-next 02/11] i40e: Some FD message fixes Jeff Kirsher
2014-08-27 9:26 ` [net-next 03/11] i40e: ATR policy change to flush the table to clean stale ATR rules Jeff Kirsher
2014-08-27 9:26 ` [net-next 04/11] i40e: Add a FD flush counter to ethtool Jeff Kirsher
2014-08-27 9:26 ` [net-next 05/11] i40e: Enable l2tsel bit for VLAN tag control Jeff Kirsher
2014-08-27 9:26 ` [net-next 06/11] i40e: set num_queue_pairs to num configured by VF Jeff Kirsher
2014-08-27 9:26 ` [net-next 07/11] i40e: Add checks and message for Qualified Module info Jeff Kirsher
2014-08-27 9:26 ` [net-next 08/11] i40e/i40evf: add max buf len to aq debug print helper Jeff Kirsher
2014-08-27 9:26 ` Jeff Kirsher [this message]
2014-08-27 9:26 ` [net-next 10/11] i40e/i40evf: Ignore a driver perceived Tx hang if the number of desc pending < 4 Jeff Kirsher
2014-08-27 9:26 ` [net-next 11/11] i40e/i40evf: Bump i40e & i40evf version Jeff Kirsher
2014-08-28 21:19 ` [net-next 00/11][pull request] Intel Wired LAN Driver Updates 2014-08-27 David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1409131606-15011-10-git-send-email-jeffrey.t.kirsher@intel.com \
--to=jeffrey.t.kirsher@intel.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=nhorman@redhat.com \
--cc=sassmann@redhat.com \
--cc=shannon.nelson@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).