[net-next 00/11][pull request] Intel Wired LAN Driver Updates 2014-08-27

[net-next 00/11][pull request] Intel Wired LAN Driver Updates 2014-08-27

[Jeff Kirsher]

This series contains updates to i40e and i40evf.

Carolyn provides two patches, first changes the wording of the flow
director add/remove and asynchronous failure messages to include the
fd_id to try and add some way to track the operations on a given fd_id.
Second adds a check during handle_link_event for unqualified modules
when link is down and there is a module plugged in.

Anjali provides four patches to i40e/i40evf.  First update flow director
messages so that a user can tell if a filter was added or deleted.  Then
updates the ATR policy to not auto-disable ATR when we have errors in
programming.  The disabling of ATR when we got programming errors was
buggy and was still adding new rules and causing continuous errors.
With this policy change, we flush instead when we see too many errors.
In addition she adds a flow director flush counter to ethtool to help
know how many times the interface had to flush and replay the flow
director filter table.  Updates the driver to ignores a driver
perceived transmit hang if the number of descriptors pending is less
than 4, and instead log a stat when this situation happens.  This is
because the queue progresses forward and the stack never experiences
a real hang in these situations.

Shannon provides three patches for i40e/i40evf, first enables the
l2tsel bit on receive queue contexts that are assigned to VFs so that
the VF can get the stripped VLAN tag.  Then adds a max buffer size
parameter to the print helper to be sure the code knows when to stop.
Lastly, remove the complaint when removing the default MAC VLAN filter.
This was because old firmware had an incorrect MAC VLAN filter that
needed to be replaced at startup, and now newer firmware does not have
this problem.  So now we only add the new filter if the removal
succeeded and no need to complain if the removal fails.

Ashish provides a change to vsi->num_queue_pairs to equal the number
that is configured by the VF.  This limits the number of queues that
are enabled/disabled and fixes the mismatch case for when a VF
configures fewer queues than is allocated to it by the PF.

The following are changes since commit a3d1214688d5259a200414def4d38f1e4531febd:
  neigh: document gc_thresh2
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Anjali Singhai Jain (4):
  i40e: Some FD message fixes
  i40e: ATR policy change to flush the table to clean stale ATR rules
  i40e: Add a FD flush counter to ethtool
  i40e/i40evf: Ignore a driver perceived Tx hang if the number of desc
    pending < 4

Ashish Shah (1):
  i40e: set num_queue_pairs to num configured by VF

Carolyn Wyborny (2):
  i40e: Update flow director error messages to reduce user confusion
  i40e: Add checks and message for Qualified Module info

Catherine Sullivan (1):
  i40e/i40evf: Bump i40e & i40evf version

Shannon Nelson (3):
  i40e: Enable l2tsel bit for VLAN tag control
  i40e/i40evf: add max buf len to aq debug print helper
  i40e: quiet complaints when removing default MAC VLAN filter and make
    set_mac reversible

 drivers/net/ethernet/intel/i40e/i40e.h             |   8 +
 drivers/net/ethernet/intel/i40e/i40e_adminq.c      |   8 +-
 drivers/net/ethernet/intel/i40e/i40e_common.c      |   8 +-
 drivers/net/ethernet/intel/i40e/i40e_debugfs.c     |   3 +
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c     |  15 ++
 drivers/net/ethernet/intel/i40e/i40e_main.c        | 216 +++++++++++++++++----
 drivers/net/ethernet/intel/i40e/i40e_prototype.h   |   6 +-
 drivers/net/ethernet/intel/i40e/i40e_txrx.c        |  88 ++++++---
 drivers/net/ethernet/intel/i40e/i40e_txrx.h        |   1 +
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c |  14 +-
 drivers/net/ethernet/intel/i40evf/i40e_adminq.c    |   9 +-
 drivers/net/ethernet/intel/i40evf/i40e_common.c    |   8 +-
 drivers/net/ethernet/intel/i40evf/i40e_prototype.h |   6 +-
 drivers/net/ethernet/intel/i40evf/i40e_txrx.c      |   6 +-
 drivers/net/ethernet/intel/i40evf/i40e_txrx.h      |   1 +
 drivers/net/ethernet/intel/i40evf/i40evf_main.c    |   2 +-
 16 files changed, 301 insertions(+), 98 deletions(-)

-- 
1.9.3

[net-next 01/11] i40e: Update flow director error messages to reduce user confusion

[Jeff Kirsher]

From: Carolyn Wyborny <carolyn.wyborny@intel.com>

This patch changes the wording of the flow director add/remove and
asynchronous failure messages to include fd_id to try and add some
way to track the operations on a given fd_id.  Its not perfect, but
its better than what we had as PCTYPE can apply to several different
filter requests.

This patch also removes a redundant message when filter
addition fails due to full condition.

Change-ID: Icf58b0603d4f162d9fc542f11a74866a907049f2
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Jim Young <jamesx.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_txrx.c | 33 ++++++++++++++---------------
 1 file changed, 16 insertions(+), 17 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index a51aa37..a6cc8d6 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -224,15 +224,14 @@ static int i40e_add_del_fdir_udpv4(struct i40e_vsi *vsi,
 	ret = i40e_program_fdir_filter(fd_data, raw_packet, pf, add);
 	if (ret) {
 		dev_info(&pf->pdev->dev,
-			 "Filter command send failed for PCTYPE %d (ret = %d)\n",
-			 fd_data->pctype, ret);
+			 "PCTYPE:%d, Filter command send failed for fd_id:%d (ret = %d)\n",
+			 fd_data->pctype, fd_data->fd_id, ret);
 		err = true;
 	} else {
 		dev_info(&pf->pdev->dev,
-			 "Filter OK for PCTYPE %d (ret = %d)\n",
-			 fd_data->pctype, ret);
+			 "PCTYPE:%d, Filter send OK for fd_id:%d\n",
+			 fd_data->pctype, fd_data->fd_id);
 	}
-
 	return err ? -EOPNOTSUPP : 0;
 }
 
@@ -287,12 +286,13 @@ static int i40e_add_del_fdir_tcpv4(struct i40e_vsi *vsi,
 
 	if (ret) {
 		dev_info(&pf->pdev->dev,
-			 "Filter command send failed for PCTYPE %d (ret = %d)\n",
-			 fd_data->pctype, ret);
+			 "PCTYPE:%d, Filter command send failed for fd_id:%d (ret = %d)\n",
+			 fd_data->pctype, fd_data->fd_id, ret);
 		err = true;
 	} else {
-		dev_info(&pf->pdev->dev, "Filter OK for PCTYPE %d (ret = %d)\n",
-			 fd_data->pctype, ret);
+		dev_info(&pf->pdev->dev,
+			 "PCTYPE:%d, Filter send OK for fd_id:%d\n",
+			 fd_data->pctype, fd_data->fd_id);
 	}
 
 	return err ? -EOPNOTSUPP : 0;
@@ -355,13 +355,13 @@ static int i40e_add_del_fdir_ipv4(struct i40e_vsi *vsi,
 
 		if (ret) {
 			dev_info(&pf->pdev->dev,
-				 "Filter command send failed for PCTYPE %d (ret = %d)\n",
-				 fd_data->pctype, ret);
+				 "PCTYPE:%d, Filter command send failed for fd_id:%d (ret = %d)\n",
+				 fd_data->pctype, fd_data->fd_id, ret);
 			err = true;
 		} else {
 			dev_info(&pf->pdev->dev,
-				 "Filter OK for PCTYPE %d (ret = %d)\n",
-				 fd_data->pctype, ret);
+				 "PCTYPE:%d, Filter send OK for fd_id:%d\n",
+				 fd_data->pctype, fd_data->fd_id);
 		}
 	}
 
@@ -443,8 +443,6 @@ static void i40e_fd_handle_status(struct i40e_ring *rx_ring,
 		I40E_RX_PROG_STATUS_DESC_QW1_ERROR_SHIFT;
 
 	if (error == (0x1 << I40E_RX_PROG_STATUS_DESC_FD_TBL_FULL_SHIFT)) {
-		dev_warn(&pdev->dev, "ntuple filter loc = %d, could not be added\n",
-			 rx_desc->wb.qword0.hi_dword.fd_id);
 
 		/* filter programming failed most likely due to table full */
 		fcnt_prog = i40e_get_cur_guaranteed_fd_count(pf);
@@ -471,12 +469,13 @@ static void i40e_fd_handle_status(struct i40e_ring *rx_ring,
 				pf->flags |= I40E_FLAG_FDIR_REQUIRES_REINIT;
 			}
 		} else {
-			dev_info(&pdev->dev, "FD filter programming error\n");
+			dev_info(&pdev->dev,
+				 "FD filter programming failed due to incorrect filter parameters\n");
 		}
 	} else if (error ==
 			  (0x1 << I40E_RX_PROG_STATUS_DESC_NO_FD_ENTRY_SHIFT)) {
 		if (I40E_DEBUG_FD & pf->hw.debug_mask)
-			dev_info(&pdev->dev, "ntuple filter loc = %d, could not be removed\n",
+			dev_info(&pdev->dev, "ntuple filter fd_id = %d, could not be removed\n",
 				 rx_desc->wb.qword0.hi_dword.fd_id);
 	}
 }
-- 
1.9.3

[net-next 02/11] i40e: Some FD message fixes

[Jeff Kirsher]

From: Anjali Singhai Jain <anjali.singhai@intel.com>

Change the message that gets printed when adding/deleting a filter to
the SB, so that user can tell if a filter was added or deleted.
Print filter add failures only in case of SB filters. For ATR the
information is not useful to the user and hence suppress it unless in
higher debug mode.

Change-ID: I78d7a7a6ecfa82a38a582b0d7b4da038355e3735
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Tested-by: Jim Young <jamesx.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_txrx.c | 38 +++++++++++++++++++++--------
 1 file changed, 28 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index a6cc8d6..267c0e6 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -228,9 +228,14 @@ static int i40e_add_del_fdir_udpv4(struct i40e_vsi *vsi,
 			 fd_data->pctype, fd_data->fd_id, ret);
 		err = true;
 	} else {
-		dev_info(&pf->pdev->dev,
-			 "PCTYPE:%d, Filter send OK for fd_id:%d\n",
-			 fd_data->pctype, fd_data->fd_id);
+		if (add)
+			dev_info(&pf->pdev->dev,
+				 "Filter OK for PCTYPE %d loc = %d\n",
+				 fd_data->pctype, fd_data->fd_id);
+		else
+			dev_info(&pf->pdev->dev,
+				 "Filter deleted for PCTYPE %d loc = %d\n",
+				 fd_data->pctype, fd_data->fd_id);
 	}
 	return err ? -EOPNOTSUPP : 0;
 }
@@ -290,9 +295,13 @@ static int i40e_add_del_fdir_tcpv4(struct i40e_vsi *vsi,
 			 fd_data->pctype, fd_data->fd_id, ret);
 		err = true;
 	} else {
-		dev_info(&pf->pdev->dev,
-			 "PCTYPE:%d, Filter send OK for fd_id:%d\n",
-			 fd_data->pctype, fd_data->fd_id);
+		if (add)
+			dev_info(&pf->pdev->dev, "Filter OK for PCTYPE %d loc = %d)\n",
+				 fd_data->pctype, fd_data->fd_id);
+		else
+			dev_info(&pf->pdev->dev,
+				 "Filter deleted for PCTYPE %d loc = %d\n",
+				 fd_data->pctype, fd_data->fd_id);
 	}
 
 	return err ? -EOPNOTSUPP : 0;
@@ -359,9 +368,14 @@ static int i40e_add_del_fdir_ipv4(struct i40e_vsi *vsi,
 				 fd_data->pctype, fd_data->fd_id, ret);
 			err = true;
 		} else {
-			dev_info(&pf->pdev->dev,
-				 "PCTYPE:%d, Filter send OK for fd_id:%d\n",
-				 fd_data->pctype, fd_data->fd_id);
+			if (add)
+				dev_info(&pf->pdev->dev,
+					 "Filter OK for PCTYPE %d loc = %d\n",
+					 fd_data->pctype, fd_data->fd_id);
+			else
+				dev_info(&pf->pdev->dev,
+					 "Filter deleted for PCTYPE %d loc = %d\n",
+					 fd_data->pctype, fd_data->fd_id);
 		}
 	}
 
@@ -443,6 +457,10 @@ static void i40e_fd_handle_status(struct i40e_ring *rx_ring,
 		I40E_RX_PROG_STATUS_DESC_QW1_ERROR_SHIFT;
 
 	if (error == (0x1 << I40E_RX_PROG_STATUS_DESC_FD_TBL_FULL_SHIFT)) {
+		if ((rx_desc->wb.qword0.hi_dword.fd_id != 0) ||
+		    (I40E_DEBUG_FD & pf->hw.debug_mask))
+			dev_warn(&pdev->dev, "ntuple filter loc = %d, could not be added\n",
+				 rx_desc->wb.qword0.hi_dword.fd_id);
 
 		/* filter programming failed most likely due to table full */
 		fcnt_prog = i40e_get_cur_guaranteed_fd_count(pf);
@@ -470,7 +488,7 @@ static void i40e_fd_handle_status(struct i40e_ring *rx_ring,
 			}
 		} else {
 			dev_info(&pdev->dev,
-				 "FD filter programming failed due to incorrect filter parameters\n");
+				"FD filter programming failed due to incorrect filter parameters\n");
 		}
 	} else if (error ==
 			  (0x1 << I40E_RX_PROG_STATUS_DESC_NO_FD_ENTRY_SHIFT)) {
-- 
1.9.3

[net-next 03/11] i40e: ATR policy change to flush the table to clean stale ATR rules

[Jeff Kirsher]

From: Anjali Singhai Jain <anjali.singhai@intel.com>

Instead of disabling ATR when we get a programming error, we now
will wait it out to see if some room gets created by ATR rule deletion.
If we still have too many errors and ATR filter count did not change
much, its time to flush and replay. We no more auto-disable ATR when
we have errors in programming.
The disabling of ATR when we get programming error was buggy and
was still adding new rules and causing continuous errors. With this
policy change we flush instead when we see too many errors.
ATR is still disabled if we add a SB rule for TCP/IPv4 flow type,
more logic is added to re-enable it once all SB TCP/IPv4 rules are gone.

Change-ID: I77edcbeab9500c72a7e0bd7b5c5b113ced133a9c
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Tested-by: Jim Young <jamesx.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e.h         |  6 ++
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c |  6 ++
 drivers/net/ethernet/intel/i40e/i40e_main.c    | 96 +++++++++++++++++++++++---
 drivers/net/ethernet/intel/i40e/i40e_txrx.c    | 23 +++---
 4 files changed, 111 insertions(+), 20 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index 801da39..0c6a9b9 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -144,6 +144,7 @@ enum i40e_state_t {
 	__I40E_PTP_TX_IN_PROGRESS,
 	__I40E_BAD_EEPROM,
 	__I40E_DOWN_REQUESTED,
+	__I40E_FD_FLUSH_REQUESTED,
 };
 
 enum i40e_interrupt_policy {
@@ -250,6 +251,10 @@ struct i40e_pf {
 	u16 fdir_pf_active_filters;
 	u16 fd_sb_cnt_idx;
 	u16 fd_atr_cnt_idx;
+	unsigned long fd_flush_timestamp;
+	u32 fd_add_err;
+	u32 fd_atr_cnt;
+	u32 fd_tcp_rule;
 
 #ifdef CONFIG_I40E_VXLAN
 	__be16  vxlan_ports[I40E_MAX_PF_UDP_OFFLOAD_PORTS];
@@ -608,6 +613,7 @@ int i40e_add_del_fdir(struct i40e_vsi *vsi,
 void i40e_fdir_check_and_reenable(struct i40e_pf *pf);
 int i40e_get_current_fd_count(struct i40e_pf *pf);
 int i40e_get_cur_guaranteed_fd_count(struct i40e_pf *pf);
+int i40e_get_current_atr_cnt(struct i40e_pf *pf);
 bool i40e_set_ntuple(struct i40e_pf *pf, netdev_features_t features);
 void i40e_set_ethtool_ops(struct net_device *netdev);
 struct i40e_mac_filter *i40e_add_filter(struct i40e_vsi *vsi,
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index e8ba747..7204e29 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -1977,6 +1977,9 @@ static int i40e_del_fdir_entry(struct i40e_vsi *vsi,
 	struct i40e_pf *pf = vsi->back;
 	int ret = 0;
 
+	if (test_bit(__I40E_FD_FLUSH_REQUESTED, &pf->state))
+		return -EBUSY;
+
 	ret = i40e_update_ethtool_fdir_entry(vsi, NULL, fsp->location, cmd);
 
 	i40e_fdir_check_and_reenable(pf);
@@ -2010,6 +2013,9 @@ static int i40e_add_fdir_ethtool(struct i40e_vsi *vsi,
 	if (pf->auto_disable_flags & I40E_FLAG_FD_SB_ENABLED)
 		return -ENOSPC;
 
+	if (test_bit(__I40E_FD_FLUSH_REQUESTED, &pf->state))
+		return -EBUSY;
+
 	fsp = (struct ethtool_rx_flow_spec *)&cmd->fs;
 
 	if (fsp->location >= (pf->hw.func_caps.fd_filters_best_effort +
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index eddec6b..cab9c9e 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -4483,8 +4483,16 @@ static int i40e_up_complete(struct i40e_vsi *vsi)
 	}
 
 	/* replay FDIR SB filters */
-	if (vsi->type == I40E_VSI_FDIR)
+	if (vsi->type == I40E_VSI_FDIR) {
+		/* reset fd counters */
+		pf->fd_add_err = pf->fd_atr_cnt = 0;
+		if (pf->fd_tcp_rule > 0) {
+			pf->flags &= ~I40E_FLAG_FD_ATR_ENABLED;
+			dev_info(&pf->pdev->dev, "Forcing ATR off, sideband rules for TCP/IPv4 exist\n");
+			pf->fd_tcp_rule = 0;
+		}
 		i40e_fdir_filter_restore(vsi);
+	}
 	i40e_service_event_schedule(pf);
 
 	return 0;
@@ -5125,6 +5133,7 @@ int i40e_get_current_fd_count(struct i40e_pf *pf)
 		      I40E_PFQF_FDSTAT_BEST_CNT_SHIFT);
 	return fcnt_prog;
 }
+
 /**
  * i40e_fdir_check_and_reenable - Function to reenabe FD ATR or SB if disabled
  * @pf: board private structure
@@ -5133,15 +5142,17 @@ void i40e_fdir_check_and_reenable(struct i40e_pf *pf)
 {
 	u32 fcnt_prog, fcnt_avail;
 
+	if (test_bit(__I40E_FD_FLUSH_REQUESTED, &pf->state))
+		return;
+
 	/* Check if, FD SB or ATR was auto disabled and if there is enough room
 	 * to re-enable
 	 */
-	if ((pf->flags & I40E_FLAG_FD_ATR_ENABLED) &&
-	    (pf->flags & I40E_FLAG_FD_SB_ENABLED))
-		return;
 	fcnt_prog = i40e_get_cur_guaranteed_fd_count(pf);
 	fcnt_avail = pf->fdir_pf_filter_count;
-	if (fcnt_prog < (fcnt_avail - I40E_FDIR_BUFFER_HEAD_ROOM)) {
+	if ((fcnt_prog < (fcnt_avail - I40E_FDIR_BUFFER_HEAD_ROOM)) ||
+	    (pf->fd_add_err == 0) ||
+	    (i40e_get_current_atr_cnt(pf) < pf->fd_atr_cnt)) {
 		if ((pf->flags & I40E_FLAG_FD_SB_ENABLED) &&
 		    (pf->auto_disable_flags & I40E_FLAG_FD_SB_ENABLED)) {
 			pf->auto_disable_flags &= ~I40E_FLAG_FD_SB_ENABLED;
@@ -5158,23 +5169,83 @@ void i40e_fdir_check_and_reenable(struct i40e_pf *pf)
 	}
 }
 
+#define I40E_MIN_FD_FLUSH_INTERVAL 10
+/**
+ * i40e_fdir_flush_and_replay - Function to flush all FD filters and replay SB
+ * @pf: board private structure
+ **/
+static void i40e_fdir_flush_and_replay(struct i40e_pf *pf)
+{
+	int flush_wait_retry = 50;
+	int reg;
+
+	if (time_after(jiffies, pf->fd_flush_timestamp +
+				(I40E_MIN_FD_FLUSH_INTERVAL * HZ))) {
+		set_bit(__I40E_FD_FLUSH_REQUESTED, &pf->state);
+		pf->fd_flush_timestamp = jiffies;
+		pf->auto_disable_flags |= I40E_FLAG_FD_SB_ENABLED;
+		pf->flags &= ~I40E_FLAG_FD_ATR_ENABLED;
+		/* flush all filters */
+		wr32(&pf->hw, I40E_PFQF_CTL_1,
+		     I40E_PFQF_CTL_1_CLEARFDTABLE_MASK);
+		i40e_flush(&pf->hw);
+		pf->fd_add_err = 0;
+		do {
+			/* Check FD flush status every 5-6msec */
+			usleep_range(5000, 6000);
+			reg = rd32(&pf->hw, I40E_PFQF_CTL_1);
+			if (!(reg & I40E_PFQF_CTL_1_CLEARFDTABLE_MASK))
+				break;
+		} while (flush_wait_retry--);
+		if (reg & I40E_PFQF_CTL_1_CLEARFDTABLE_MASK) {
+			dev_warn(&pf->pdev->dev, "FD table did not flush, needs more time\n");
+		} else {
+			/* replay sideband filters */
+			i40e_fdir_filter_restore(pf->vsi[pf->lan_vsi]);
+
+			pf->flags |= I40E_FLAG_FD_ATR_ENABLED;
+			pf->auto_disable_flags &= ~I40E_FLAG_FD_ATR_ENABLED;
+			pf->auto_disable_flags &= ~I40E_FLAG_FD_SB_ENABLED;
+			clear_bit(__I40E_FD_FLUSH_REQUESTED, &pf->state);
+			dev_info(&pf->pdev->dev, "FD Filter table flushed and FD-SB replayed.\n");
+		}
+	}
+}
+
+/**
+ * i40e_get_current_atr_count - Get the count of total FD ATR filters programmed
+ * @pf: board private structure
+ **/
+int i40e_get_current_atr_cnt(struct i40e_pf *pf)
+{
+	return i40e_get_current_fd_count(pf) - pf->fdir_pf_active_filters;
+}
+
+/* We can see up to 256 filter programming desc in transit if the filters are
+ * being applied really fast; before we see the first
+ * filter miss error on Rx queue 0. Accumulating enough error messages before
+ * reacting will make sure we don't cause flush too often.
+ */
+#define I40E_MAX_FD_PROGRAM_ERROR 256
+
 /**
  * i40e_fdir_reinit_subtask - Worker thread to reinit FDIR filter table
  * @pf: board private structure
  **/
 static void i40e_fdir_reinit_subtask(struct i40e_pf *pf)
 {
-	if (!(pf->flags & I40E_FLAG_FDIR_REQUIRES_REINIT))
-		return;
 
 	/* if interface is down do nothing */
 	if (test_bit(__I40E_DOWN, &pf->state))
 		return;
+
+	if ((pf->fd_add_err >= I40E_MAX_FD_PROGRAM_ERROR) &&
+	    (i40e_get_current_atr_cnt(pf) >= pf->fd_atr_cnt) &&
+	    (i40e_get_current_atr_cnt(pf) > pf->fdir_pf_filter_count))
+		i40e_fdir_flush_and_replay(pf);
+
 	i40e_fdir_check_and_reenable(pf);
 
-	if ((pf->flags & I40E_FLAG_FD_ATR_ENABLED) &&
-	    (pf->flags & I40E_FLAG_FD_SB_ENABLED))
-		pf->flags &= ~I40E_FLAG_FDIR_REQUIRES_REINIT;
 }
 
 /**
@@ -7086,6 +7157,11 @@ bool i40e_set_ntuple(struct i40e_pf *pf, netdev_features_t features)
 		}
 		pf->flags &= ~I40E_FLAG_FD_SB_ENABLED;
 		pf->auto_disable_flags &= ~I40E_FLAG_FD_SB_ENABLED;
+		/* reset fd counters */
+		pf->fd_add_err = pf->fd_atr_cnt = pf->fd_tcp_rule = 0;
+		pf->fdir_pf_active_filters = 0;
+		pf->flags |= I40E_FLAG_FD_ATR_ENABLED;
+		dev_info(&pf->pdev->dev, "ATR re-enabled.\n");
 		/* if ATR was auto disabled it can be re-enabled. */
 		if ((pf->flags & I40E_FLAG_FD_ATR_ENABLED) &&
 		    (pf->auto_disable_flags & I40E_FLAG_FD_ATR_ENABLED))
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 267c0e6..366624a 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -280,10 +280,18 @@ static int i40e_add_del_fdir_tcpv4(struct i40e_vsi *vsi,
 	tcp->source = fd_data->src_port;
 
 	if (add) {
+		pf->fd_tcp_rule++;
 		if (pf->flags & I40E_FLAG_FD_ATR_ENABLED) {
 			dev_info(&pf->pdev->dev, "Forcing ATR off, sideband rules for TCP/IPv4 flow being applied\n");
 			pf->flags &= ~I40E_FLAG_FD_ATR_ENABLED;
 		}
+	} else {
+		pf->fd_tcp_rule = (pf->fd_tcp_rule > 0) ?
+				  (pf->fd_tcp_rule - 1) : 0;
+		if (pf->fd_tcp_rule == 0) {
+			pf->flags |= I40E_FLAG_FD_ATR_ENABLED;
+			dev_info(&pf->pdev->dev, "ATR re-enabled due to no sideband TCP/IPv4 rules\n");
+		}
 	}
 
 	fd_data->pctype = I40E_FILTER_PCTYPE_NONF_IPV4_TCP;
@@ -462,6 +470,10 @@ static void i40e_fd_handle_status(struct i40e_ring *rx_ring,
 			dev_warn(&pdev->dev, "ntuple filter loc = %d, could not be added\n",
 				 rx_desc->wb.qword0.hi_dword.fd_id);
 
+		pf->fd_add_err++;
+		/* store the current atr filter count */
+		pf->fd_atr_cnt = i40e_get_current_atr_cnt(pf);
+
 		/* filter programming failed most likely due to table full */
 		fcnt_prog = i40e_get_cur_guaranteed_fd_count(pf);
 		fcnt_avail = pf->fdir_pf_filter_count;
@@ -470,21 +482,12 @@ static void i40e_fd_handle_status(struct i40e_ring *rx_ring,
 		 * FD ATR/SB and then re-enable it when there is room.
 		 */
 		if (fcnt_prog >= (fcnt_avail - I40E_FDIR_BUFFER_FULL_MARGIN)) {
-			/* Turn off ATR first */
-			if ((pf->flags & I40E_FLAG_FD_ATR_ENABLED) &&
+			if ((pf->flags & I40E_FLAG_FD_SB_ENABLED) &&
 			    !(pf->auto_disable_flags &
-			      I40E_FLAG_FD_ATR_ENABLED)) {
-				dev_warn(&pdev->dev, "FD filter space full, ATR for further flows will be turned off\n");
-				pf->auto_disable_flags |=
-						       I40E_FLAG_FD_ATR_ENABLED;
-				pf->flags |= I40E_FLAG_FDIR_REQUIRES_REINIT;
-			} else if ((pf->flags & I40E_FLAG_FD_SB_ENABLED) &&
-				   !(pf->auto_disable_flags &
 				     I40E_FLAG_FD_SB_ENABLED)) {
 				dev_warn(&pdev->dev, "FD filter space full, new ntuple rules will not be added\n");
 				pf->auto_disable_flags |=
 							I40E_FLAG_FD_SB_ENABLED;
-				pf->flags |= I40E_FLAG_FDIR_REQUIRES_REINIT;
 			}
 		} else {
 			dev_info(&pdev->dev,
-- 
1.9.3

[net-next 04/11] i40e: Add a FD flush counter to ethtool

[Jeff Kirsher]

From: Anjali Singhai Jain <anjali.singhai@intel.com>

This helps know how many times the interface had to flush and replay FD
filter table, which gives an indication on how often we are getting FD
table full situation.

Also check on certain pf states before proceeding to add or delete
filters since we can't add or delete filters if we are in those states.

Change-ID: I97f5bbbea7146833ea61af0e08ea794fccba1780
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Tested-by: Jim Young <jamesx.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e.h         | 1 +
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 9 +++++++++
 drivers/net/ethernet/intel/i40e/i40e_main.c    | 1 +
 3 files changed, 11 insertions(+)

diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index 0c6a9b9..8526950 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -252,6 +252,7 @@ struct i40e_pf {
 	u16 fd_sb_cnt_idx;
 	u16 fd_atr_cnt_idx;
 	unsigned long fd_flush_timestamp;
+	u32 fd_flush_cnt;
 	u32 fd_add_err;
 	u32 fd_atr_cnt;
 	u32 fd_tcp_rule;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 7204e29..571d527 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -145,6 +145,7 @@ static struct i40e_stats i40e_gstrings_stats[] = {
 	I40E_PF_STAT("rx_jabber", stats.rx_jabber),
 	I40E_PF_STAT("VF_admin_queue_requests", vf_aq_requests),
 	I40E_PF_STAT("rx_hwtstamp_cleared", rx_hwtstamp_cleared),
+	I40E_PF_STAT("fdir_flush_cnt", fd_flush_cnt),
 	I40E_PF_STAT("fdir_atr_match", stats.fd_atr_match),
 	I40E_PF_STAT("fdir_sb_match", stats.fd_sb_match),
 
@@ -1977,6 +1978,10 @@ static int i40e_del_fdir_entry(struct i40e_vsi *vsi,
 	struct i40e_pf *pf = vsi->back;
 	int ret = 0;
 
+	if (test_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state) ||
+	    test_bit(__I40E_RESET_INTR_RECEIVED, &pf->state))
+		return -EBUSY;
+
 	if (test_bit(__I40E_FD_FLUSH_REQUESTED, &pf->state))
 		return -EBUSY;
 
@@ -2013,6 +2018,10 @@ static int i40e_add_fdir_ethtool(struct i40e_vsi *vsi,
 	if (pf->auto_disable_flags & I40E_FLAG_FD_SB_ENABLED)
 		return -ENOSPC;
 
+	if (test_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state) ||
+	    test_bit(__I40E_RESET_INTR_RECEIVED, &pf->state))
+		return -EBUSY;
+
 	if (test_bit(__I40E_FD_FLUSH_REQUESTED, &pf->state))
 		return -EBUSY;
 
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index cab9c9e..712a23b 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -5189,6 +5189,7 @@ static void i40e_fdir_flush_and_replay(struct i40e_pf *pf)
 		wr32(&pf->hw, I40E_PFQF_CTL_1,
 		     I40E_PFQF_CTL_1_CLEARFDTABLE_MASK);
 		i40e_flush(&pf->hw);
+		pf->fd_flush_cnt++;
 		pf->fd_add_err = 0;
 		do {
 			/* Check FD flush status every 5-6msec */
-- 
1.9.3

[net-next 05/11] i40e: Enable l2tsel bit for VLAN tag control

[Jeff Kirsher]

From: Shannon Nelson <shannon.nelson@intel.com>

Enable the l2tsel bit on Rx queue contexts that are assigned to VFs so
that the VF can get the stripped VLAN tag.

Change-ID: I7d9bc56238a9ea9baf5e8a97e69b9e27ebb9d169
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Ashish Shah <ashish.n.shah@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index 3ac6a0d..0309bf8 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -350,6 +350,7 @@ static int i40e_config_vsi_rx_queue(struct i40e_vf *vf, u16 vsi_idx,
 	rx_ctx.lrxqthresh = 2;
 	rx_ctx.crcstrip = 1;
 	rx_ctx.prefena = 1;
+	rx_ctx.l2tsel = 1;
 
 	/* clear the context in the HMC */
 	ret = i40e_clear_lan_rx_queue_context(hw, pf_queue_id);
-- 
1.9.3

[net-next 06/11] i40e: set num_queue_pairs to num configured by VF

[Jeff Kirsher]

From: Ashish Shah <ashish.n.shah@intel.com>

Change vsi->num_queue_pairs to equal the number that are configured
by the VF. This, in turn, limits the number of queues that are
enable/disabled. This fixes the mismatched case for when a VF configures
fewer queues than is allocated to it by the PF.

Change other sections to use alloc_queue_pairs as warranted.

Change-ID: I0de1b55c9084e7be6acc818da8569f12128a82c2
Signed-off-by: Ashish Shah <ashish.n.shah@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index 0309bf8..da0f005 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -73,7 +73,7 @@ static inline bool i40e_vc_isvalid_queue_id(struct i40e_vf *vf, u8 vsi_id,
 {
 	struct i40e_pf *pf = vf->pf;
 
-	return qid < pf->vsi[vsi_id]->num_queue_pairs;
+	return qid < pf->vsi[vsi_id]->alloc_queue_pairs;
 }
 
 /**
@@ -469,7 +469,7 @@ static void i40e_enable_vf_mappings(struct i40e_vf *vf)
 	wr32(hw, I40E_VPLAN_MAPENA(vf->vf_id), reg);
 
 	/* map PF queues to VF queues */
-	for (j = 0; j < pf->vsi[vf->lan_vsi_index]->num_queue_pairs; j++) {
+	for (j = 0; j < pf->vsi[vf->lan_vsi_index]->alloc_queue_pairs; j++) {
 		u16 qid = i40e_vc_get_pf_queue_id(vf, vf->lan_vsi_index, j);
 		reg = (qid & I40E_VPLAN_QTABLE_QINDEX_MASK);
 		wr32(hw, I40E_VPLAN_QTABLE(total_queue_pairs, vf->vf_id), reg);
@@ -478,7 +478,7 @@ static void i40e_enable_vf_mappings(struct i40e_vf *vf)
 
 	/* map PF queues to VSI */
 	for (j = 0; j < 7; j++) {
-		if (j * 2 >= pf->vsi[vf->lan_vsi_index]->num_queue_pairs) {
+		if (j * 2 >= pf->vsi[vf->lan_vsi_index]->alloc_queue_pairs) {
 			reg = 0x07FF07FF;	/* unused */
 		} else {
 			u16 qid = i40e_vc_get_pf_queue_id(vf, vf->lan_vsi_index,
@@ -585,7 +585,7 @@ static int i40e_alloc_vf_res(struct i40e_vf *vf)
 	ret = i40e_alloc_vsi_res(vf, I40E_VSI_SRIOV);
 	if (ret)
 		goto error_alloc;
-	total_queue_pairs += pf->vsi[vf->lan_vsi_index]->num_queue_pairs;
+	total_queue_pairs += pf->vsi[vf->lan_vsi_index]->alloc_queue_pairs;
 	set_bit(I40E_VIRTCHNL_VF_CAP_PRIVILEGE, &vf->vf_caps);
 
 	/* store the total qps number for the runtime
@@ -1124,7 +1124,7 @@ static int i40e_vc_get_vf_resources_msg(struct i40e_vf *vf)
 		vfres->vsi_res[i].vsi_id = vf->lan_vsi_index;
 		vfres->vsi_res[i].vsi_type = I40E_VSI_SRIOV;
 		vfres->vsi_res[i].num_queue_pairs =
-		    pf->vsi[vf->lan_vsi_index]->num_queue_pairs;
+		    pf->vsi[vf->lan_vsi_index]->alloc_queue_pairs;
 		memcpy(vfres->vsi_res[i].default_mac_addr,
 		       vf->default_lan_addr.addr, ETH_ALEN);
 		i++;
@@ -1210,6 +1210,7 @@ static int i40e_vc_config_queues_msg(struct i40e_vf *vf, u8 *msg, u16 msglen)
 	struct i40e_virtchnl_vsi_queue_config_info *qci =
 	    (struct i40e_virtchnl_vsi_queue_config_info *)msg;
 	struct i40e_virtchnl_queue_pair_info *qpi;
+	struct i40e_pf *pf = vf->pf;
 	u16 vsi_id, vsi_queue_id;
 	i40e_status aq_ret = 0;
 	int i;
@@ -1243,6 +1244,8 @@ static int i40e_vc_config_queues_msg(struct i40e_vf *vf, u8 *msg, u16 msglen)
 			goto error_param;
 		}
 	}
+	/* set vsi num_queue_pairs in use to num configured by vf */
+	pf->vsi[vf->lan_vsi_index]->num_queue_pairs = qci->num_queue_pairs;
 
 error_param:
 	/* send the response to the vf */
-- 
1.9.3

[net-next 07/11] i40e: Add checks and message for Qualified Module info

[Jeff Kirsher]

From: Carolyn Wyborny <carolyn.wyborny@intel.com>

This patch adds a check during handle_link_event for unqualified
module when link is down and there is a module plugged.  If found,
print a message.

Change-ID: Ibd8666d77d3044c2a3dd4d762d3ae9ac6e18e943
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Jim Young <jamesx.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 712a23b..172f756 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -4480,6 +4480,13 @@ static int i40e_up_complete(struct i40e_vsi *vsi)
 		netif_carrier_on(vsi->netdev);
 	} else if (vsi->netdev) {
 		i40e_print_link_message(vsi, false);
+		/* need to check for qualified module here*/
+		if ((pf->hw.phy.link_info.link_info &
+			I40E_AQ_MEDIA_AVAILABLE) &&
+		    (!(pf->hw.phy.link_info.an_info &
+			I40E_AQ_QUALIFIED_MODULE)))
+			netdev_err(vsi->netdev,
+				   "the driver failed to link because an unqualified module was detected.");
 	}
 
 	/* replay FDIR SB filters */
@@ -5492,6 +5499,13 @@ static void i40e_handle_link_event(struct i40e_pf *pf,
 	memcpy(&pf->hw.phy.link_info_old, hw_link_info,
 	       sizeof(pf->hw.phy.link_info_old));
 
+	/* check for unqualified module, if link is down */
+	if ((status->link_info & I40E_AQ_MEDIA_AVAILABLE) &&
+	    (!(status->an_info & I40E_AQ_QUALIFIED_MODULE)) &&
+	    (!(status->link_info & I40E_AQ_LINK_UP)))
+		dev_err(&pf->pdev->dev,
+			"The driver failed to link because an unqualified module was detected.\n");
+
 	/* update link status */
 	hw_link_info->phy_type = (enum i40e_aq_phy_type)status->phy_type;
 	hw_link_info->link_speed = (enum i40e_aq_link_speed)status->link_speed;
-- 
1.9.3

[net-next 08/11] i40e/i40evf: add max buf len to aq debug print helper

[Jeff Kirsher]

From: Shannon Nelson <shannon.nelson@intel.com>

There is at least one case in the Firmware API where the response to a
command changes the buffer size field in the AQ descriptor to a larger
number than what the request's buffer size started as.  This is in addition
to setting an error flag and is in order to tell the requester how much
larger a buffer is required for the answer.  We need to be sure not to
use that number when dumping the contents of the data buffer because it
can send us into the weeds and generate an invalid pointer exception.

This patch adds a max buffer size parameter to the print helper to be
sure the code knows when to stop.

Change-ID: Ib84f7ed72140fe9d600086d8f2002fc5d8753092
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Tested-by: Jim Young <jamesx.m.young@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_adminq.c      | 8 +++++---
 drivers/net/ethernet/intel/i40e/i40e_common.c      | 8 ++++++--
 drivers/net/ethernet/intel/i40e/i40e_prototype.h   | 6 ++----
 drivers/net/ethernet/intel/i40evf/i40e_adminq.c    | 9 ++++++---
 drivers/net/ethernet/intel/i40evf/i40e_common.c    | 8 ++++++--
 drivers/net/ethernet/intel/i40evf/i40e_prototype.h | 6 ++----
 6 files changed, 27 insertions(+), 18 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq.c b/drivers/net/ethernet/intel/i40e/i40e_adminq.c
index b29c157..72f5d25 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_adminq.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_adminq.c
@@ -840,7 +840,8 @@ i40e_status i40e_asq_send_command(struct i40e_hw *hw,
 
 	/* bump the tail */
 	i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE, "AQTX: desc and buffer:\n");
-	i40e_debug_aq(hw, I40E_DEBUG_AQ_COMMAND, (void *)desc_on_ring, buff);
+	i40e_debug_aq(hw, I40E_DEBUG_AQ_COMMAND, (void *)desc_on_ring,
+		      buff, buff_size);
 	(hw->aq.asq.next_to_use)++;
 	if (hw->aq.asq.next_to_use == hw->aq.asq.count)
 		hw->aq.asq.next_to_use = 0;
@@ -891,7 +892,7 @@ i40e_status i40e_asq_send_command(struct i40e_hw *hw,
 
 	i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
 		   "AQTX: desc and buffer writeback:\n");
-	i40e_debug_aq(hw, I40E_DEBUG_AQ_COMMAND, (void *)desc, buff);
+	i40e_debug_aq(hw, I40E_DEBUG_AQ_COMMAND, (void *)desc, buff, buff_size);
 
 	/* update the error if time out occurred */
 	if ((!cmd_completed) &&
@@ -987,7 +988,8 @@ i40e_status i40e_clean_arq_element(struct i40e_hw *hw,
 		       e->msg_size);
 
 	i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE, "AQRX: desc and buffer:\n");
-	i40e_debug_aq(hw, I40E_DEBUG_AQ_COMMAND, (void *)desc, e->msg_buf);
+	i40e_debug_aq(hw, I40E_DEBUG_AQ_COMMAND, (void *)desc, e->msg_buf,
+		      hw->aq.arq_buf_size);
 
 	/* Restore the original datalen and buffer address in the desc,
 	 * FW updates datalen to indicate the event message
diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c
index df43e7c..01874c0 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_common.c
@@ -75,13 +75,15 @@ static i40e_status i40e_set_mac_type(struct i40e_hw *hw)
  * @mask: debug mask
  * @desc: pointer to admin queue descriptor
  * @buffer: pointer to command buffer
+ * @buf_len: max length of buffer
  *
  * Dumps debug log about adminq command with descriptor contents.
  **/
 void i40e_debug_aq(struct i40e_hw *hw, enum i40e_debug_mask mask, void *desc,
-		   void *buffer)
+		   void *buffer, u16 buf_len)
 {
 	struct i40e_aq_desc *aq_desc = (struct i40e_aq_desc *)desc;
+	u16 len = le16_to_cpu(aq_desc->datalen);
 	u8 *aq_buffer = (u8 *)buffer;
 	u32 data[4];
 	u32 i = 0;
@@ -105,7 +107,9 @@ void i40e_debug_aq(struct i40e_hw *hw, enum i40e_debug_mask mask, void *desc,
 	if ((buffer != NULL) && (aq_desc->datalen != 0)) {
 		memset(data, 0, sizeof(data));
 		i40e_debug(hw, mask, "AQ CMD Buffer:\n");
-		for (i = 0; i < le16_to_cpu(aq_desc->datalen); i++) {
+		if (buf_len < len)
+			len = buf_len;
+		for (i = 0; i < len; i++) {
 			data[((i % 16) / 4)] |=
 				((u32)aq_buffer[i]) << (8 * (i % 4));
 			if ((i % 16) == 15) {
diff --git a/drivers/net/ethernet/intel/i40e/i40e_prototype.h b/drivers/net/ethernet/intel/i40e/i40e_prototype.h
index 949a9a0..0988b5c 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_prototype.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_prototype.h
@@ -52,10 +52,8 @@ i40e_status i40e_asq_send_command(struct i40e_hw *hw,
 				struct i40e_asq_cmd_details *cmd_details);
 
 /* debug function for adminq */
-void i40e_debug_aq(struct i40e_hw *hw,
-		   enum i40e_debug_mask mask,
-		   void *desc,
-		   void *buffer);
+void i40e_debug_aq(struct i40e_hw *hw, enum i40e_debug_mask mask,
+		   void *desc, void *buffer, u16 buf_len);
 
 void i40e_idle_aq(struct i40e_hw *hw);
 bool i40e_check_asq_alive(struct i40e_hw *hw);
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_adminq.c b/drivers/net/ethernet/intel/i40evf/i40e_adminq.c
index 0030060..f206be9 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_adminq.c
+++ b/drivers/net/ethernet/intel/i40evf/i40e_adminq.c
@@ -788,7 +788,8 @@ i40e_status i40evf_asq_send_command(struct i40e_hw *hw,
 
 	/* bump the tail */
 	i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE, "AQTX: desc and buffer:\n");
-	i40evf_debug_aq(hw, I40E_DEBUG_AQ_COMMAND, (void *)desc_on_ring, buff);
+	i40evf_debug_aq(hw, I40E_DEBUG_AQ_COMMAND, (void *)desc_on_ring,
+			buff, buff_size);
 	(hw->aq.asq.next_to_use)++;
 	if (hw->aq.asq.next_to_use == hw->aq.asq.count)
 		hw->aq.asq.next_to_use = 0;
@@ -842,7 +843,8 @@ i40e_status i40evf_asq_send_command(struct i40e_hw *hw,
 
 	i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
 		   "AQTX: desc and buffer writeback:\n");
-	i40evf_debug_aq(hw, I40E_DEBUG_AQ_COMMAND, (void *)desc, buff);
+	i40evf_debug_aq(hw, I40E_DEBUG_AQ_COMMAND, (void *)desc, buff,
+			buff_size);
 
 	/* update the error if time out occurred */
 	if ((!cmd_completed) &&
@@ -938,7 +940,8 @@ i40e_status i40evf_clean_arq_element(struct i40e_hw *hw,
 		hw->aq.nvm_busy = false;
 
 	i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE, "AQRX: desc and buffer:\n");
-	i40evf_debug_aq(hw, I40E_DEBUG_AQ_COMMAND, (void *)desc, e->msg_buf);
+	i40evf_debug_aq(hw, I40E_DEBUG_AQ_COMMAND, (void *)desc, e->msg_buf,
+			hw->aq.arq_buf_size);
 
 	/* Restore the original datalen and buffer address in the desc,
 	 * FW updates datalen to indicate the event message
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_common.c b/drivers/net/ethernet/intel/i40evf/i40e_common.c
index 4ea90bf..9525605 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40evf/i40e_common.c
@@ -75,13 +75,15 @@ i40e_status i40e_set_mac_type(struct i40e_hw *hw)
  * @mask: debug mask
  * @desc: pointer to admin queue descriptor
  * @buffer: pointer to command buffer
+ * @buf_len: max length of buffer
  *
  * Dumps debug log about adminq command with descriptor contents.
  **/
 void i40evf_debug_aq(struct i40e_hw *hw, enum i40e_debug_mask mask, void *desc,
-		   void *buffer)
+		   void *buffer, u16 buf_len)
 {
 	struct i40e_aq_desc *aq_desc = (struct i40e_aq_desc *)desc;
+	u16 len = le16_to_cpu(aq_desc->datalen);
 	u8 *aq_buffer = (u8 *)buffer;
 	u32 data[4];
 	u32 i = 0;
@@ -105,7 +107,9 @@ void i40evf_debug_aq(struct i40e_hw *hw, enum i40e_debug_mask mask, void *desc,
 	if ((buffer != NULL) && (aq_desc->datalen != 0)) {
 		memset(data, 0, sizeof(data));
 		i40e_debug(hw, mask, "AQ CMD Buffer:\n");
-		for (i = 0; i < le16_to_cpu(aq_desc->datalen); i++) {
+		if (buf_len < len)
+			len = buf_len;
+		for (i = 0; i < len; i++) {
 			data[((i % 16) / 4)] |=
 				((u32)aq_buffer[i]) << (8 * (i % 4));
 			if ((i % 16) == 15) {
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_prototype.h b/drivers/net/ethernet/intel/i40evf/i40e_prototype.h
index 849edcc..9173834 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_prototype.h
+++ b/drivers/net/ethernet/intel/i40evf/i40e_prototype.h
@@ -53,10 +53,8 @@ i40e_status i40evf_asq_send_command(struct i40e_hw *hw,
 bool i40evf_asq_done(struct i40e_hw *hw);
 
 /* debug function for adminq */
-void i40evf_debug_aq(struct i40e_hw *hw,
-		   enum i40e_debug_mask mask,
-		   void *desc,
-		   void *buffer);
+void i40evf_debug_aq(struct i40e_hw *hw, enum i40e_debug_mask mask,
+		     void *desc, void *buffer, u16 buf_len);
 
 void i40e_idle_aq(struct i40e_hw *hw);
 void i40evf_resume_aq(struct i40e_hw *hw);
-- 
1.9.3

[net-next 09/11] i40e: quiet complaints when removing default MAC VLAN filter and make set_mac reversible

[Jeff Kirsher]

From: Shannon Nelson <shannon.nelson@intel.com>

Older firmware has an incorrect MAC VLAN filter that needs to be replaced
at startup, and now newer firmware doesn't have this problem.  With this
change we no longer complain if the remove fails, and we only add the
new filter if the remove succeeded.

Setting a new LAA worked the first time, but didn't work well in successive
operations, including returning to the HW default address.  This simplifies
the code that was trying to be too smart.

Lastly, this pulls the hardware default mac address out into separate
handling code and keeps the broadcast filtering from getting munged.

Change-ID: I1f54b002def04ffef2546febb9a4044385452f85
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Tested-by: Jim Young <jamesx.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 99 ++++++++++++++++++++---------
 1 file changed, 70 insertions(+), 29 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 172f756..3216aa5 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -1239,8 +1239,11 @@ struct i40e_mac_filter *i40e_put_mac_in_vlan(struct i40e_vsi *vsi, u8 *macaddr,
  * i40e_rm_default_mac_filter - Remove the default MAC filter set by NVM
  * @vsi: the PF Main VSI - inappropriate for any other VSI
  * @macaddr: the MAC address
+ *
+ * Some older firmware configurations set up a default promiscuous VLAN
+ * filter that needs to be removed.
  **/
-static void i40e_rm_default_mac_filter(struct i40e_vsi *vsi, u8 *macaddr)
+static int i40e_rm_default_mac_filter(struct i40e_vsi *vsi, u8 *macaddr)
 {
 	struct i40e_aqc_remove_macvlan_element_data element;
 	struct i40e_pf *pf = vsi->back;
@@ -1248,15 +1251,18 @@ static void i40e_rm_default_mac_filter(struct i40e_vsi *vsi, u8 *macaddr)
 
 	/* Only appropriate for the PF main VSI */
 	if (vsi->type != I40E_VSI_MAIN)
-		return;
+		return -EINVAL;
 
+	memset(&element, 0, sizeof(element));
 	ether_addr_copy(element.mac_addr, macaddr);
 	element.vlan_tag = 0;
 	element.flags = I40E_AQC_MACVLAN_DEL_PERFECT_MATCH |
 			I40E_AQC_MACVLAN_DEL_IGNORE_VLAN;
 	aq_ret = i40e_aq_remove_macvlan(&pf->hw, vsi->seid, &element, 1, NULL);
 	if (aq_ret)
-		dev_err(&pf->pdev->dev, "Could not remove default MAC-VLAN\n");
+		return -ENOENT;
+
+	return 0;
 }
 
 /**
@@ -1385,18 +1391,30 @@ static int i40e_set_mac(struct net_device *netdev, void *p)
 {
 	struct i40e_netdev_priv *np = netdev_priv(netdev);
 	struct i40e_vsi *vsi = np->vsi;
+	struct i40e_pf *pf = vsi->back;
+	struct i40e_hw *hw = &pf->hw;
 	struct sockaddr *addr = p;
 	struct i40e_mac_filter *f;
 
 	if (!is_valid_ether_addr(addr->sa_data))
 		return -EADDRNOTAVAIL;
 
-	netdev_info(netdev, "set mac address=%pM\n", addr->sa_data);
+	if (ether_addr_equal(netdev->dev_addr, addr->sa_data)) {
+		netdev_info(netdev, "already using mac address %pM\n",
+			    addr->sa_data);
+		return 0;
+	}
 
 	if (test_bit(__I40E_DOWN, &vsi->back->state) ||
 	    test_bit(__I40E_RESET_RECOVERY_PENDING, &vsi->back->state))
 		return -EADDRNOTAVAIL;
 
+	if (ether_addr_equal(hw->mac.addr, addr->sa_data))
+		netdev_info(netdev, "returning to hw mac address %pM\n",
+			    hw->mac.addr);
+	else
+		netdev_info(netdev, "set new mac address %pM\n", addr->sa_data);
+
 	if (vsi->type == I40E_VSI_MAIN) {
 		i40e_status ret;
 		ret = i40e_aq_mac_address_write(&vsi->back->hw,
@@ -1410,25 +1428,34 @@ static int i40e_set_mac(struct net_device *netdev, void *p)
 		}
 	}
 
-	f = i40e_find_mac(vsi, addr->sa_data, false, true);
-	if (!f) {
-		/* In order to be sure to not drop any packets, add the
-		 * new address first then delete the old one.
-		 */
-		f = i40e_add_filter(vsi, addr->sa_data, I40E_VLAN_ANY,
-				    false, false);
-		if (!f)
-			return -ENOMEM;
+	if (ether_addr_equal(netdev->dev_addr, hw->mac.addr)) {
+		struct i40e_aqc_remove_macvlan_element_data element;
 
-		i40e_sync_vsi_filters(vsi);
+		memset(&element, 0, sizeof(element));
+		ether_addr_copy(element.mac_addr, netdev->dev_addr);
+		element.flags = I40E_AQC_MACVLAN_DEL_PERFECT_MATCH;
+		i40e_aq_remove_macvlan(&pf->hw, vsi->seid, &element, 1, NULL);
+	} else {
 		i40e_del_filter(vsi, netdev->dev_addr, I40E_VLAN_ANY,
 				false, false);
-		i40e_sync_vsi_filters(vsi);
 	}
 
-	f->is_laa = true;
-	if (!ether_addr_equal(netdev->dev_addr, addr->sa_data))
-		ether_addr_copy(netdev->dev_addr, addr->sa_data);
+	if (ether_addr_equal(addr->sa_data, hw->mac.addr)) {
+		struct i40e_aqc_add_macvlan_element_data element;
+
+		memset(&element, 0, sizeof(element));
+		ether_addr_copy(element.mac_addr, hw->mac.addr);
+		element.flags = cpu_to_le16(I40E_AQC_MACVLAN_ADD_PERFECT_MATCH);
+		i40e_aq_add_macvlan(&pf->hw, vsi->seid, &element, 1, NULL);
+	} else {
+		f = i40e_add_filter(vsi, addr->sa_data, I40E_VLAN_ANY,
+				    false, false);
+		if (f)
+			f->is_laa = true;
+	}
+
+	i40e_sync_vsi_filters(vsi);
+	ether_addr_copy(netdev->dev_addr, addr->sa_data);
 
 	return 0;
 }
@@ -1796,9 +1823,8 @@ int i40e_sync_vsi_filters(struct i40e_vsi *vsi)
 		kfree(add_list);
 		add_list = NULL;
 
-		if (add_happened && (!aq_ret)) {
-			/* do nothing */;
-		} else if (add_happened && (aq_ret)) {
+		if (add_happened && aq_ret &&
+		    pf->hw.aq.asq_last_status != I40E_AQ_RC_EINVAL) {
 			dev_info(&pf->pdev->dev,
 				 "add filter failed, err %d, aq_err %d\n",
 				 aq_ret, pf->hw.aq.asq_last_status);
@@ -7512,14 +7538,14 @@ static int i40e_config_netdev(struct i40e_vsi *vsi)
 	if (vsi->type == I40E_VSI_MAIN) {
 		SET_NETDEV_DEV(netdev, &pf->pdev->dev);
 		ether_addr_copy(mac_addr, hw->mac.perm_addr);
-		/* The following two steps are necessary to prevent reception
-		 * of tagged packets - by default the NVM loads a MAC-VLAN
-		 * filter that will accept any tagged packet.  This is to
-		 * prevent that during normal operations until a specific
-		 * VLAN tag filter has been set.
+		/* The following steps are necessary to prevent reception
+		 * of tagged packets - some older NVM configurations load a
+		 * default a MAC-VLAN filter that accepts any tagged packet
+		 * which must be replaced by a normal filter.
 		 */
-		i40e_rm_default_mac_filter(vsi, mac_addr);
-		i40e_add_filter(vsi, mac_addr, I40E_VLAN_ANY, false, true);
+		if (!i40e_rm_default_mac_filter(vsi, mac_addr))
+			i40e_add_filter(vsi, mac_addr,
+					I40E_VLAN_ANY, false, true);
 	} else {
 		/* relate the VSI_VMDQ name to the VSI_MAIN name */
 		snprintf(netdev->name, IFNAMSIZ, "%sv%%d",
@@ -7735,7 +7761,22 @@ static int i40e_add_vsi(struct i40e_vsi *vsi)
 		f_count++;
 
 		if (f->is_laa && vsi->type == I40E_VSI_MAIN) {
-			i40e_aq_mac_address_write(&vsi->back->hw,
+			struct i40e_aqc_remove_macvlan_element_data element;
+
+			memset(&element, 0, sizeof(element));
+			ether_addr_copy(element.mac_addr, f->macaddr);
+			element.flags = I40E_AQC_MACVLAN_DEL_PERFECT_MATCH;
+			ret = i40e_aq_remove_macvlan(hw, vsi->seid,
+						     &element, 1, NULL);
+			if (ret) {
+				/* some older FW has a different default */
+				element.flags |=
+					       I40E_AQC_MACVLAN_DEL_IGNORE_VLAN;
+				i40e_aq_remove_macvlan(hw, vsi->seid,
+						       &element, 1, NULL);
+			}
+
+			i40e_aq_mac_address_write(hw,
 						  I40E_AQC_WRITE_TYPE_LAA_WOL,
 						  f->macaddr, NULL);
 		}
-- 
1.9.3

[net-next 10/11] i40e/i40evf: Ignore a driver perceived Tx hang if the number of desc pending < 4

[Jeff Kirsher]

From: Anjali Singhai Jain <anjali.singhai@intel.com>

We are seeing situations where the driver sees a hang with less than 4
desc pending, if the driver chooses to ignore it the queue progresses
forward and the stack never experiences a real hang.
With this patch we will log a stat when this situation happens
"tx_sluggish" will increment and we can see some more details
at a higher debug level. Other than that we will ignore this
particular case of Tx hang.

Change-ID: I7d1d1666d990e2b12f4f6bed0d17d22e1b6410d5
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e.h         |  1 +
 drivers/net/ethernet/intel/i40e/i40e_debugfs.c |  3 +++
 drivers/net/ethernet/intel/i40e/i40e_txrx.c    | 10 +++++++++-
 drivers/net/ethernet/intel/i40e/i40e_txrx.h    |  1 +
 drivers/net/ethernet/intel/i40evf/i40e_txrx.c  |  6 ++++--
 drivers/net/ethernet/intel/i40evf/i40e_txrx.h  |  1 +
 6 files changed, 19 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index 8526950..4e97ba1 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -316,6 +316,7 @@ struct i40e_pf {
 	u32 tx_timeout_count;
 	u32 tx_timeout_recovery_level;
 	unsigned long tx_timeout_last_recovery;
+	u32 tx_sluggish_count;
 	u32 hw_csum_rx_error;
 	u32 led_status;
 	u16 corer_count; /* Core reset count */
diff --git a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
index 5a0cabe..7067f4b 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
@@ -1356,6 +1356,9 @@ static ssize_t i40e_dbg_command_write(struct file *filp,
 				 "emp reset count: %d\n", pf->empr_count);
 			dev_info(&pf->pdev->dev,
 				 "pf reset count: %d\n", pf->pfr_count);
+			dev_info(&pf->pdev->dev,
+				 "pf tx sluggish count: %d\n",
+				 pf->tx_sluggish_count);
 		} else if (strncmp(&cmd_buf[5], "port", 4) == 0) {
 			struct i40e_aqc_query_port_ets_config_resp *bw_data;
 			struct i40e_dcbx_config *cfg =
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 366624a..4bf49d2 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -607,6 +607,7 @@ static u32 i40e_get_tx_pending(struct i40e_ring *ring)
 static bool i40e_check_tx_hang(struct i40e_ring *tx_ring)
 {
 	u32 tx_pending = i40e_get_tx_pending(tx_ring);
+	struct i40e_pf *pf = tx_ring->vsi->back;
 	bool ret = false;
 
 	clear_check_for_tx_hang(tx_ring);
@@ -623,10 +624,17 @@ static bool i40e_check_tx_hang(struct i40e_ring *tx_ring)
 	 * pending but without time to complete it yet.
 	 */
 	if ((tx_ring->tx_stats.tx_done_old == tx_ring->stats.packets) &&
-	    tx_pending) {
+	    (tx_pending >= I40E_MIN_DESC_PENDING)) {
 		/* make sure it is true for two checks in a row */
 		ret = test_and_set_bit(__I40E_HANG_CHECK_ARMED,
 				       &tx_ring->state);
+	} else if ((tx_ring->tx_stats.tx_done_old == tx_ring->stats.packets) &&
+		   (tx_pending < I40E_MIN_DESC_PENDING) &&
+		   (tx_pending > 0)) {
+		if (I40E_DEBUG_FLOW & pf->hw.debug_mask)
+			dev_info(tx_ring->dev, "HW needs some more descs to do a cacheline flush. tx_pending %d, queue %d",
+				 tx_pending, tx_ring->queue_index);
+		pf->tx_sluggish_count++;
 	} else {
 		/* update completed stats and disarm the hang check */
 		tx_ring->tx_stats.tx_done_old = tx_ring->stats.packets;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.h b/drivers/net/ethernet/intel/i40e/i40e_txrx.h
index 73f4fa4..d7a625a 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.h
@@ -121,6 +121,7 @@ enum i40e_dyn_idx_t {
 /* Tx Descriptors needed, worst case */
 #define TXD_USE_COUNT(S) DIV_ROUND_UP((S), I40E_MAX_DATA_PER_TXD)
 #define DESC_NEEDED (MAX_SKB_FRAGS + 4)
+#define I40E_MIN_DESC_PENDING	4
 
 #define I40E_TX_FLAGS_CSUM		(u32)(1)
 #define I40E_TX_FLAGS_HW_VLAN		(u32)(1 << 1)
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
index 79bf96c..64b0891 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
@@ -163,11 +163,13 @@ static bool i40e_check_tx_hang(struct i40e_ring *tx_ring)
 	 * pending but without time to complete it yet.
 	 */
 	if ((tx_ring->tx_stats.tx_done_old == tx_ring->stats.packets) &&
-	    tx_pending) {
+	    (tx_pending >= I40E_MIN_DESC_PENDING)) {
 		/* make sure it is true for two checks in a row */
 		ret = test_and_set_bit(__I40E_HANG_CHECK_ARMED,
 				       &tx_ring->state);
-	} else {
+	} else if (!(tx_ring->tx_stats.tx_done_old == tx_ring->stats.packets) ||
+		   !(tx_pending < I40E_MIN_DESC_PENDING) ||
+		   !(tx_pending > 0)) {
 		/* update completed stats and disarm the hang check */
 		tx_ring->tx_stats.tx_done_old = tx_ring->stats.packets;
 		clear_bit(__I40E_HANG_CHECK_ARMED, &tx_ring->state);
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.h b/drivers/net/ethernet/intel/i40evf/i40e_txrx.h
index 8bc6858..f6dcf9d 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.h
+++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.h
@@ -121,6 +121,7 @@ enum i40e_dyn_idx_t {
 /* Tx Descriptors needed, worst case */
 #define TXD_USE_COUNT(S) DIV_ROUND_UP((S), I40E_MAX_DATA_PER_TXD)
 #define DESC_NEEDED (MAX_SKB_FRAGS + 4)
+#define I40E_MIN_DESC_PENDING	4
 
 #define I40E_TX_FLAGS_CSUM		(u32)(1)
 #define I40E_TX_FLAGS_HW_VLAN		(u32)(1 << 1)
-- 
1.9.3

[net-next 11/11] i40e/i40evf: Bump i40e & i40evf version

[Jeff Kirsher]

From: Catherine Sullivan <catherine.sullivan@intel.com>

Bump versions for i40e to 1.0.4 and i40evf to 1.0.1.

Change-ID: I960c04da2c91bdf1d02f8e5011e68c34a634122d
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-By: Jim Young <jamesx.m.young@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c     | 6 +++---
 drivers/net/ethernet/intel/i40evf/i40evf_main.c | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 3216aa5..bd192b8 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -37,9 +37,9 @@ static const char i40e_driver_string[] =
 
 #define DRV_KERN "-k"
 
-#define DRV_VERSION_MAJOR 0
-#define DRV_VERSION_MINOR 4
-#define DRV_VERSION_BUILD 21
+#define DRV_VERSION_MAJOR 1
+#define DRV_VERSION_MINOR 0
+#define DRV_VERSION_BUILD 4
 #define DRV_VERSION __stringify(DRV_VERSION_MAJOR) "." \
 	     __stringify(DRV_VERSION_MINOR) "." \
 	     __stringify(DRV_VERSION_BUILD)    DRV_KERN
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index 38429fa..8c80925 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -36,7 +36,7 @@ char i40evf_driver_name[] = "i40evf";
 static const char i40evf_driver_string[] =
 	"Intel(R) XL710/X710 Virtual Function Network Driver";
 
-#define DRV_VERSION "0.9.40"
+#define DRV_VERSION "1.0.1"
 const char i40evf_driver_version[] = DRV_VERSION;
 static const char i40evf_copyright[] =
 	"Copyright (c) 2013 - 2014 Intel Corporation.";
-- 
1.9.3

Re: [net-next 00/11][pull request] Intel Wired LAN Driver Updates 2014-08-27

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Wed, 27 Aug 2014 02:26:35 -0700

> This series contains updates to i40e and i40evf.

Pulled, thanks Jeff.