* [PATCH v2 net-next 01/12] be2net: add a few log messages
2014-09-02 4:26 [PATCH v2 net-next 00/12] be2net: patch set Sathya Perla
@ 2014-09-02 4:26 ` Sathya Perla
2014-09-02 4:26 ` [PATCH v2 net-next 02/12] be2net: shorten AMAP_GET/SET_BITS() macro calls Sathya Perla
` (10 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Sathya Perla @ 2014-09-02 4:26 UTC (permalink / raw)
To: netdev
This patch adds the following log messages to help debugging
failure cases:
1) log FW version number: this is useful when driver initialization
fails and the FW version number cannot be queried via ethtool
2) per function resource limits for BEx chips: these values are
currently being printed only for Skyhawk and Lancer
3) PCI BAR mapping failure
4) function_mode/caps queried from FW: this helps catch any FW bugs
that could advertise wrong capabilities to the driver
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
---
drivers/net/ethernet/emulex/benet/be_cmds.c | 4 ++++
drivers/net/ethernet/emulex/benet/be_main.c | 20 ++++++++++++--------
2 files changed, 16 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index 4370ec1..ca9ec18 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -1771,6 +1771,7 @@ int be_cmd_get_fw_ver(struct be_adapter *adapter)
status = be_mcc_notify_wait(adapter);
if (!status) {
struct be_cmd_resp_get_fw_version *resp = embedded_payload(wrb);
+
strcpy(adapter->fw_ver, resp->firmware_version_string);
strcpy(adapter->fw_on_flash, resp->fw_on_flash_version_string);
}
@@ -2018,6 +2019,9 @@ int be_cmd_query_fw_cfg(struct be_adapter *adapter)
adapter->function_mode = le32_to_cpu(resp->function_mode);
adapter->function_caps = le32_to_cpu(resp->function_caps);
adapter->asic_rev = le32_to_cpu(resp->asic_revision) & 0xFF;
+ dev_info(&adapter->pdev->dev,
+ "FW config: function_mode=0x%x, function_caps=0x%x\n",
+ adapter->function_mode, adapter->function_caps);
}
mutex_unlock(&adapter->mbox_lock);
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 93ff8ef..3d33049 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -3413,16 +3413,16 @@ static int be_get_resources(struct be_adapter *adapter)
if (be_roce_supported(adapter))
res.max_evt_qs /= 2;
adapter->res = res;
-
- dev_info(dev, "Max: txqs %d, rxqs %d, rss %d, eqs %d, vfs %d\n",
- be_max_txqs(adapter), be_max_rxqs(adapter),
- be_max_rss(adapter), be_max_eqs(adapter),
- be_max_vfs(adapter));
- dev_info(dev, "Max: uc-macs %d, mc-macs %d, vlans %d\n",
- be_max_uc(adapter), be_max_mc(adapter),
- be_max_vlans(adapter));
}
+ dev_info(dev, "Max: txqs %d, rxqs %d, rss %d, eqs %d, vfs %d\n",
+ be_max_txqs(adapter), be_max_rxqs(adapter),
+ be_max_rss(adapter), be_max_eqs(adapter),
+ be_max_vfs(adapter));
+ dev_info(dev, "Max: uc-macs %d, mc-macs %d, vlans %d\n",
+ be_max_uc(adapter), be_max_mc(adapter),
+ be_max_vlans(adapter));
+
return 0;
}
@@ -3633,6 +3633,7 @@ static int be_setup(struct be_adapter *adapter)
goto err;
be_cmd_get_fw_ver(adapter);
+ dev_info(dev, "FW version is %s\n", adapter->fw_ver);
if (BE2_chip(adapter) && fw_major_num(adapter->fw_ver) < 4) {
dev_err(dev, "Firmware on card is old(%s), IRQs may not work.",
@@ -4506,6 +4507,7 @@ static int be_map_pci_bars(struct be_adapter *adapter)
return 0;
pci_map_err:
+ dev_err(&adapter->pdev->dev, "Error in mapping PCI BARs\n");
be_unmap_pci_bars(adapter);
return -ENOMEM;
}
@@ -4822,6 +4824,8 @@ static int be_probe(struct pci_dev *pdev, const struct pci_device_id *pdev_id)
struct net_device *netdev;
char port_name;
+ dev_info(&pdev->dev, "%s version is %s\n", DRV_NAME, DRV_VER);
+
status = pci_enable_device(pdev);
if (status)
goto do_none;
--
1.7.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v2 net-next 02/12] be2net: shorten AMAP_GET/SET_BITS() macro calls
2014-09-02 4:26 [PATCH v2 net-next 00/12] be2net: patch set Sathya Perla
2014-09-02 4:26 ` [PATCH v2 net-next 01/12] be2net: add a few log messages Sathya Perla
@ 2014-09-02 4:26 ` Sathya Perla
2014-09-02 4:26 ` [PATCH v2 net-next 03/12] be2net: add a description for counter rx_input_fifo_overflow_drop Sathya Perla
` (9 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Sathya Perla @ 2014-09-02 4:26 UTC (permalink / raw)
To: netdev
The AMAP_GET/SET_BITS() macro calls take structure name as a parameter
and hence are long and span more than one line. Replace these calls
with a wrapper macros for RX/Tx compls and TX wrb. This results in fewer
lines and more readable code in be_main.c
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
---
drivers/net/ethernet/emulex/benet/be.h | 12 +++
drivers/net/ethernet/emulex/benet/be_main.c | 115 +++++++++++----------------
2 files changed, 58 insertions(+), 69 deletions(-)
diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index 43e08d0..d9cd885 100644
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -661,6 +661,18 @@ static inline u32 amap_get(void *ptr, u32 dw_offset, u32 mask, u32 offset)
amap_mask(sizeof(((_struct *)0)->field)), \
AMAP_BIT_OFFSET(_struct, field))
+#define GET_RX_COMPL_V0_BITS(field, ptr) \
+ AMAP_GET_BITS(struct amap_eth_rx_compl_v0, field, ptr)
+
+#define GET_RX_COMPL_V1_BITS(field, ptr) \
+ AMAP_GET_BITS(struct amap_eth_rx_compl_v1, field, ptr)
+
+#define GET_TX_COMPL_BITS(field, ptr) \
+ AMAP_GET_BITS(struct amap_eth_tx_compl, field, ptr)
+
+#define SET_TX_WRB_HDR_BITS(field, ptr, val) \
+ AMAP_SET_BITS(struct amap_eth_hdr_wrb, field, ptr, val)
+
#define be_dws_cpu_to_le(wrb, len) swap_dws(wrb, len)
#define be_dws_le_to_cpu(wrb, len) swap_dws(wrb, len)
static inline void swap_dws(void *wrb, int len)
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 3d33049..810ce5c 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -738,38 +738,37 @@ static void wrb_fill_hdr(struct be_adapter *adapter, struct be_eth_hdr_wrb *hdr,
memset(hdr, 0, sizeof(*hdr));
- AMAP_SET_BITS(struct amap_eth_hdr_wrb, crc, hdr, 1);
+ SET_TX_WRB_HDR_BITS(crc, hdr, 1);
if (skb_is_gso(skb)) {
- AMAP_SET_BITS(struct amap_eth_hdr_wrb, lso, hdr, 1);
- AMAP_SET_BITS(struct amap_eth_hdr_wrb, lso_mss,
- hdr, skb_shinfo(skb)->gso_size);
+ SET_TX_WRB_HDR_BITS(lso, hdr, 1);
+ SET_TX_WRB_HDR_BITS(lso_mss, hdr, skb_shinfo(skb)->gso_size);
if (skb_is_gso_v6(skb) && !lancer_chip(adapter))
- AMAP_SET_BITS(struct amap_eth_hdr_wrb, lso6, hdr, 1);
+ SET_TX_WRB_HDR_BITS(lso6, hdr, 1);
} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
if (skb->encapsulation) {
- AMAP_SET_BITS(struct amap_eth_hdr_wrb, ipcs, hdr, 1);
+ SET_TX_WRB_HDR_BITS(ipcs, hdr, 1);
proto = skb_inner_ip_proto(skb);
} else {
proto = skb_ip_proto(skb);
}
if (proto == IPPROTO_TCP)
- AMAP_SET_BITS(struct amap_eth_hdr_wrb, tcpcs, hdr, 1);
+ SET_TX_WRB_HDR_BITS(tcpcs, hdr, 1);
else if (proto == IPPROTO_UDP)
- AMAP_SET_BITS(struct amap_eth_hdr_wrb, udpcs, hdr, 1);
+ SET_TX_WRB_HDR_BITS(udpcs, hdr, 1);
}
if (vlan_tx_tag_present(skb)) {
- AMAP_SET_BITS(struct amap_eth_hdr_wrb, vlan, hdr, 1);
+ SET_TX_WRB_HDR_BITS(vlan, hdr, 1);
vlan_tag = be_get_tx_vlan_tag(adapter, skb);
- AMAP_SET_BITS(struct amap_eth_hdr_wrb, vlan_tag, hdr, vlan_tag);
+ SET_TX_WRB_HDR_BITS(vlan_tag, hdr, vlan_tag);
}
/* To skip HW VLAN tagging: evt = 1, compl = 0 */
- AMAP_SET_BITS(struct amap_eth_hdr_wrb, complete, hdr, !skip_hw_vlan);
- AMAP_SET_BITS(struct amap_eth_hdr_wrb, event, hdr, 1);
- AMAP_SET_BITS(struct amap_eth_hdr_wrb, num_wrb, hdr, wrb_cnt);
- AMAP_SET_BITS(struct amap_eth_hdr_wrb, len, hdr, len);
+ SET_TX_WRB_HDR_BITS(complete, hdr, !skip_hw_vlan);
+ SET_TX_WRB_HDR_BITS(event, hdr, 1);
+ SET_TX_WRB_HDR_BITS(num_wrb, hdr, wrb_cnt);
+ SET_TX_WRB_HDR_BITS(len, hdr, len);
}
static void unmap_tx_frag(struct device *dev, struct be_eth_wrb *wrb,
@@ -1753,65 +1752,46 @@ static void be_rx_compl_process_gro(struct be_rx_obj *rxo,
static void be_parse_rx_compl_v1(struct be_eth_rx_compl *compl,
struct be_rx_compl_info *rxcp)
{
- rxcp->pkt_size =
- AMAP_GET_BITS(struct amap_eth_rx_compl_v1, pktsize, compl);
- rxcp->vlanf = AMAP_GET_BITS(struct amap_eth_rx_compl_v1, vtp, compl);
- rxcp->err = AMAP_GET_BITS(struct amap_eth_rx_compl_v1, err, compl);
- rxcp->tcpf = AMAP_GET_BITS(struct amap_eth_rx_compl_v1, tcpf, compl);
- rxcp->udpf = AMAP_GET_BITS(struct amap_eth_rx_compl_v1, udpf, compl);
- rxcp->ip_csum =
- AMAP_GET_BITS(struct amap_eth_rx_compl_v1, ipcksm, compl);
- rxcp->l4_csum =
- AMAP_GET_BITS(struct amap_eth_rx_compl_v1, l4_cksm, compl);
- rxcp->ipv6 =
- AMAP_GET_BITS(struct amap_eth_rx_compl_v1, ip_version, compl);
- rxcp->num_rcvd =
- AMAP_GET_BITS(struct amap_eth_rx_compl_v1, numfrags, compl);
- rxcp->pkt_type =
- AMAP_GET_BITS(struct amap_eth_rx_compl_v1, cast_enc, compl);
- rxcp->rss_hash =
- AMAP_GET_BITS(struct amap_eth_rx_compl_v1, rsshash, compl);
+ rxcp->pkt_size = GET_RX_COMPL_V1_BITS(pktsize, compl);
+ rxcp->vlanf = GET_RX_COMPL_V1_BITS(vtp, compl);
+ rxcp->err = GET_RX_COMPL_V1_BITS(err, compl);
+ rxcp->tcpf = GET_RX_COMPL_V1_BITS(tcpf, compl);
+ rxcp->udpf = GET_RX_COMPL_V1_BITS(udpf, compl);
+ rxcp->ip_csum = GET_RX_COMPL_V1_BITS(ipcksm, compl);
+ rxcp->l4_csum = GET_RX_COMPL_V1_BITS(l4_cksm, compl);
+ rxcp->ipv6 = GET_RX_COMPL_V1_BITS(ip_version, compl);
+ rxcp->num_rcvd = GET_RX_COMPL_V1_BITS(numfrags, compl);
+ rxcp->pkt_type = GET_RX_COMPL_V1_BITS(cast_enc, compl);
+ rxcp->rss_hash = GET_RX_COMPL_V1_BITS(rsshash, compl);
if (rxcp->vlanf) {
- rxcp->qnq = AMAP_GET_BITS(struct amap_eth_rx_compl_v1, qnq,
- compl);
- rxcp->vlan_tag = AMAP_GET_BITS(struct amap_eth_rx_compl_v1,
- vlan_tag, compl);
+ rxcp->qnq = GET_RX_COMPL_V1_BITS(qnq, compl);
+ rxcp->vlan_tag = GET_RX_COMPL_V1_BITS(vlan_tag, compl);
}
- rxcp->port = AMAP_GET_BITS(struct amap_eth_rx_compl_v1, port, compl);
+ rxcp->port = GET_RX_COMPL_V1_BITS(port, compl);
rxcp->tunneled =
- AMAP_GET_BITS(struct amap_eth_rx_compl_v1, tunneled, compl);
+ GET_RX_COMPL_V1_BITS(tunneled, compl);
}
static void be_parse_rx_compl_v0(struct be_eth_rx_compl *compl,
struct be_rx_compl_info *rxcp)
{
- rxcp->pkt_size =
- AMAP_GET_BITS(struct amap_eth_rx_compl_v0, pktsize, compl);
- rxcp->vlanf = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, vtp, compl);
- rxcp->err = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, err, compl);
- rxcp->tcpf = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, tcpf, compl);
- rxcp->udpf = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, udpf, compl);
- rxcp->ip_csum =
- AMAP_GET_BITS(struct amap_eth_rx_compl_v0, ipcksm, compl);
- rxcp->l4_csum =
- AMAP_GET_BITS(struct amap_eth_rx_compl_v0, l4_cksm, compl);
- rxcp->ipv6 =
- AMAP_GET_BITS(struct amap_eth_rx_compl_v0, ip_version, compl);
- rxcp->num_rcvd =
- AMAP_GET_BITS(struct amap_eth_rx_compl_v0, numfrags, compl);
- rxcp->pkt_type =
- AMAP_GET_BITS(struct amap_eth_rx_compl_v0, cast_enc, compl);
- rxcp->rss_hash =
- AMAP_GET_BITS(struct amap_eth_rx_compl_v0, rsshash, compl);
+ rxcp->pkt_size = GET_RX_COMPL_V0_BITS(pktsize, compl);
+ rxcp->vlanf = GET_RX_COMPL_V0_BITS(vtp, compl);
+ rxcp->err = GET_RX_COMPL_V0_BITS(err, compl);
+ rxcp->tcpf = GET_RX_COMPL_V0_BITS(tcpf, compl);
+ rxcp->udpf = GET_RX_COMPL_V0_BITS(udpf, compl);
+ rxcp->ip_csum = GET_RX_COMPL_V0_BITS(ipcksm, compl);
+ rxcp->l4_csum = GET_RX_COMPL_V0_BITS(l4_cksm, compl);
+ rxcp->ipv6 = GET_RX_COMPL_V0_BITS(ip_version, compl);
+ rxcp->num_rcvd = GET_RX_COMPL_V0_BITS(numfrags, compl);
+ rxcp->pkt_type = GET_RX_COMPL_V0_BITS(cast_enc, compl);
+ rxcp->rss_hash = GET_RX_COMPL_V0_BITS(rsshash, compl);
if (rxcp->vlanf) {
- rxcp->qnq = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, qnq,
- compl);
- rxcp->vlan_tag = AMAP_GET_BITS(struct amap_eth_rx_compl_v0,
- vlan_tag, compl);
+ rxcp->qnq = GET_RX_COMPL_V0_BITS(qnq, compl);
+ rxcp->vlan_tag = GET_RX_COMPL_V0_BITS(vlan_tag, compl);
}
- rxcp->port = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, port, compl);
- rxcp->ip_frag = AMAP_GET_BITS(struct amap_eth_rx_compl_v0,
- ip_frag, compl);
+ rxcp->port = GET_RX_COMPL_V0_BITS(port, compl);
+ rxcp->ip_frag = GET_RX_COMPL_V0_BITS(ip_frag, compl);
}
static struct be_rx_compl_info *be_rx_compl_get(struct be_rx_obj *rxo)
@@ -2091,9 +2071,7 @@ static void be_tx_compl_clean(struct be_adapter *adapter)
num_wrbs = 0;
txq = &txo->q;
while ((txcp = be_tx_compl_get(&txo->cq))) {
- end_idx =
- AMAP_GET_BITS(struct amap_eth_tx_compl,
- wrb_index, txcp);
+ end_idx = GET_TX_COMPL_BITS(wrb_index, txcp);
num_wrbs += be_tx_compl_process(adapter, txo,
end_idx);
cmpl++;
@@ -2454,9 +2432,8 @@ static bool be_process_tx(struct be_adapter *adapter, struct be_tx_obj *txo,
if (!txcp)
break;
num_wrbs += be_tx_compl_process(adapter, txo,
- AMAP_GET_BITS(struct
- amap_eth_tx_compl,
- wrb_index, txcp));
+ GET_TX_COMPL_BITS(wrb_index,
+ txcp));
}
if (work_done) {
--
1.7.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v2 net-next 03/12] be2net: add a description for counter rx_input_fifo_overflow_drop
2014-09-02 4:26 [PATCH v2 net-next 00/12] be2net: patch set Sathya Perla
2014-09-02 4:26 ` [PATCH v2 net-next 01/12] be2net: add a few log messages Sathya Perla
2014-09-02 4:26 ` [PATCH v2 net-next 02/12] be2net: shorten AMAP_GET/SET_BITS() macro calls Sathya Perla
@ 2014-09-02 4:26 ` Sathya Perla
2014-09-02 4:26 ` [PATCH v2 net-next 04/12] be2net: Add TX completion error statistics in ethtool Sathya Perla
` (8 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Sathya Perla @ 2014-09-02 4:26 UTC (permalink / raw)
To: netdev
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
---
drivers/net/ethernet/emulex/benet/be_ethtool.c | 5 +++++
1 files changed, 5 insertions(+), 0 deletions(-)
diff --git a/drivers/net/ethernet/emulex/benet/be_ethtool.c b/drivers/net/ethernet/emulex/benet/be_ethtool.c
index 0cd3311..d8d7a4a 100644
--- a/drivers/net/ethernet/emulex/benet/be_ethtool.c
+++ b/drivers/net/ethernet/emulex/benet/be_ethtool.c
@@ -78,6 +78,11 @@ static const struct be_ethtool_stat et_stats[] = {
* fifo must never overflow.
*/
{DRVSTAT_INFO(rxpp_fifo_overflow_drop)},
+ /* Received packets dropped when the RX block runs out of space in
+ * one of its input FIFOs. This could happen due a long burst of
+ * minimum-sized (64b) frames in the receive path.
+ * This counter may also be erroneously incremented rarely.
+ */
{DRVSTAT_INFO(rx_input_fifo_overflow_drop)},
{DRVSTAT_INFO(rx_ip_checksum_errs)},
{DRVSTAT_INFO(rx_tcp_checksum_errs)},
--
1.7.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v2 net-next 04/12] be2net: Add TX completion error statistics in ethtool
2014-09-02 4:26 [PATCH v2 net-next 00/12] be2net: patch set Sathya Perla
` (2 preceding siblings ...)
2014-09-02 4:26 ` [PATCH v2 net-next 03/12] be2net: add a description for counter rx_input_fifo_overflow_drop Sathya Perla
@ 2014-09-02 4:26 ` Sathya Perla
2014-09-02 4:26 ` [PATCH v2 net-next 05/12] be2net: Add a dma_mapping_error counter " Sathya Perla
` (7 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Sathya Perla @ 2014-09-02 4:26 UTC (permalink / raw)
To: netdev
From: Kalesh AP <kalesh.purayil@emulex.com>
HW reports TX completion errors in TX completion. This patch adds these
counters to ethtool statistics.
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
---
drivers/net/ethernet/emulex/benet/be.h | 7 ++++
drivers/net/ethernet/emulex/benet/be_ethtool.c | 28 +++++++++++++++
drivers/net/ethernet/emulex/benet/be_hw.h | 12 ++++++
drivers/net/ethernet/emulex/benet/be_main.c | 45 ++++++++++++++++++++++++
4 files changed, 92 insertions(+), 0 deletions(-)
diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index d9cd885..d491ac6 100644
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -248,6 +248,13 @@ struct be_tx_stats {
ulong tx_jiffies;
u32 tx_stops;
u32 tx_drv_drops; /* pkts dropped by driver */
+ /* the error counters are described in be_ethtool.c */
+ u32 tx_hdr_parse_err;
+ u32 tx_dma_err;
+ u32 tx_tso_err;
+ u32 tx_spoof_check_err;
+ u32 tx_qinq_err;
+ u32 tx_internal_parity_err;
struct u64_stats_sync sync;
struct u64_stats_sync sync_compl;
};
diff --git a/drivers/net/ethernet/emulex/benet/be_ethtool.c b/drivers/net/ethernet/emulex/benet/be_ethtool.c
index d8d7a4a..3a7ade4 100644
--- a/drivers/net/ethernet/emulex/benet/be_ethtool.c
+++ b/drivers/net/ethernet/emulex/benet/be_ethtool.c
@@ -157,6 +157,34 @@ static const struct be_ethtool_stat et_rx_stats[] = {
*/
static const struct be_ethtool_stat et_tx_stats[] = {
{DRVSTAT_TX_INFO(tx_compl)}, /* If moving this member see above note */
+ /* This counter is incremented when the HW encounters an error while
+ * parsing the packet header of an outgoing TX request. This counter is
+ * applicable only for BE2, BE3 and Skyhawk based adapters.
+ */
+ {DRVSTAT_TX_INFO(tx_hdr_parse_err)},
+ /* This counter is incremented when an error occurs in the DMA
+ * operation associated with the TX request from the host to the device.
+ */
+ {DRVSTAT_TX_INFO(tx_dma_err)},
+ /* This counter is incremented when MAC or VLAN spoof checking is
+ * enabled on the interface and the TX request fails the spoof check
+ * in HW.
+ */
+ {DRVSTAT_TX_INFO(tx_spoof_check_err)},
+ /* This counter is incremented when the HW encounters an error while
+ * performing TSO offload. This counter is applicable only for Lancer
+ * adapters.
+ */
+ {DRVSTAT_TX_INFO(tx_tso_err)},
+ /* This counter is incremented when the HW detects Q-in-Q style VLAN
+ * tagging in a packet and such tagging is not expected on the outgoing
+ * interface. This counter is applicable only for Lancer adapters.
+ */
+ {DRVSTAT_TX_INFO(tx_qinq_err)},
+ /* This counter is incremented when the HW detects parity errors in the
+ * packet data. This counter is applicable only for Lancer adapters.
+ */
+ {DRVSTAT_TX_INFO(tx_internal_parity_err)},
{DRVSTAT_TX_INFO(tx_bytes)},
{DRVSTAT_TX_INFO(tx_pkts)},
/* Number of skbs queued for trasmission by the driver */
diff --git a/drivers/net/ethernet/emulex/benet/be_hw.h b/drivers/net/ethernet/emulex/benet/be_hw.h
index 8840c64..295ee08 100644
--- a/drivers/net/ethernet/emulex/benet/be_hw.h
+++ b/drivers/net/ethernet/emulex/benet/be_hw.h
@@ -315,6 +315,18 @@ struct be_eth_hdr_wrb {
u32 dw[4];
};
+/********* Tx Compl Status Encoding *********/
+#define BE_TX_COMP_HDR_PARSE_ERR 0x2
+#define BE_TX_COMP_NDMA_ERR 0x3
+#define BE_TX_COMP_ACL_ERR 0x5
+
+#define LANCER_TX_COMP_LSO_ERR 0x1
+#define LANCER_TX_COMP_HSW_DROP_MAC_ERR 0x3
+#define LANCER_TX_COMP_HSW_DROP_VLAN_ERR 0x5
+#define LANCER_TX_COMP_QINQ_ERR 0x7
+#define LANCER_TX_COMP_PARITY_ERR 0xb
+#define LANCER_TX_COMP_DMA_ERR 0xd
+
/* TX Compl Queue Descriptor */
/* Pseudo amap definition for eth_tx_compl in which each bit of the
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 810ce5c..e9658f7 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -2421,11 +2421,49 @@ loop_continue:
return work_done;
}
+static inline void be_update_tx_err(struct be_tx_obj *txo, u32 status)
+{
+ switch (status) {
+ case BE_TX_COMP_HDR_PARSE_ERR:
+ tx_stats(txo)->tx_hdr_parse_err++;
+ break;
+ case BE_TX_COMP_NDMA_ERR:
+ tx_stats(txo)->tx_dma_err++;
+ break;
+ case BE_TX_COMP_ACL_ERR:
+ tx_stats(txo)->tx_spoof_check_err++;
+ break;
+ }
+}
+
+static inline void lancer_update_tx_err(struct be_tx_obj *txo, u32 status)
+{
+ switch (status) {
+ case LANCER_TX_COMP_LSO_ERR:
+ tx_stats(txo)->tx_tso_err++;
+ break;
+ case LANCER_TX_COMP_HSW_DROP_MAC_ERR:
+ case LANCER_TX_COMP_HSW_DROP_VLAN_ERR:
+ tx_stats(txo)->tx_spoof_check_err++;
+ break;
+ case LANCER_TX_COMP_QINQ_ERR:
+ tx_stats(txo)->tx_qinq_err++;
+ break;
+ case LANCER_TX_COMP_PARITY_ERR:
+ tx_stats(txo)->tx_internal_parity_err++;
+ break;
+ case LANCER_TX_COMP_DMA_ERR:
+ tx_stats(txo)->tx_dma_err++;
+ break;
+ }
+}
+
static bool be_process_tx(struct be_adapter *adapter, struct be_tx_obj *txo,
int budget, int idx)
{
struct be_eth_tx_compl *txcp;
int num_wrbs = 0, work_done;
+ u32 compl_status;
for (work_done = 0; work_done < budget; work_done++) {
txcp = be_tx_compl_get(&txo->cq);
@@ -2434,6 +2472,13 @@ static bool be_process_tx(struct be_adapter *adapter, struct be_tx_obj *txo,
num_wrbs += be_tx_compl_process(adapter, txo,
GET_TX_COMPL_BITS(wrb_index,
txcp));
+ compl_status = GET_TX_COMPL_BITS(status, txcp);
+ if (compl_status) {
+ if (lancer_chip(adapter))
+ lancer_update_tx_err(txo, compl_status);
+ else
+ be_update_tx_err(txo, compl_status);
+ }
}
if (work_done) {
--
1.7.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v2 net-next 05/12] be2net: Add a dma_mapping_error counter in ethtool
2014-09-02 4:26 [PATCH v2 net-next 00/12] be2net: patch set Sathya Perla
` (3 preceding siblings ...)
2014-09-02 4:26 ` [PATCH v2 net-next 04/12] be2net: Add TX completion error statistics in ethtool Sathya Perla
@ 2014-09-02 4:26 ` Sathya Perla
2014-09-02 4:26 ` [PATCH v2 net-next 06/12] be2net: fix log messages in lancer FW download path Sathya Perla
` (6 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Sathya Perla @ 2014-09-02 4:26 UTC (permalink / raw)
To: netdev
From: Vasundhara Volam <vasundhara.volam@emulex.com>
Add a dma_mapping_error counter to count the number of packets dropped
due to DMA mapping errors.
Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
---
drivers/net/ethernet/emulex/benet/be.h | 1 +
drivers/net/ethernet/emulex/benet/be_ethtool.c | 2 ++
drivers/net/ethernet/emulex/benet/be_main.c | 3 ++-
3 files changed, 5 insertions(+), 1 deletions(-)
diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index d491ac6..069bdda 100644
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -323,6 +323,7 @@ struct be_rx_obj {
struct be_drv_stats {
u32 be_on_die_temperature;
u32 eth_red_drops;
+ u32 dma_map_errors;
u32 rx_drops_no_pbuf;
u32 rx_drops_no_txpb;
u32 rx_drops_no_erx_descr;
diff --git a/drivers/net/ethernet/emulex/benet/be_ethtool.c b/drivers/net/ethernet/emulex/benet/be_ethtool.c
index 3a7ade4..2fd3826 100644
--- a/drivers/net/ethernet/emulex/benet/be_ethtool.c
+++ b/drivers/net/ethernet/emulex/benet/be_ethtool.c
@@ -119,6 +119,8 @@ static const struct be_ethtool_stat et_stats[] = {
* is more than 9018 bytes
*/
{DRVSTAT_INFO(rx_drops_mtu)},
+ /* Number of dma mapping errors */
+ {DRVSTAT_INFO(dma_map_errors)},
/* Number of packets dropped due to random early drop function */
{DRVSTAT_INFO(eth_red_drops)},
{DRVSTAT_INFO(be_on_die_temperature)},
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index e9658f7..c95998f 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -849,6 +849,7 @@ dma_err:
unmap_tx_frag(dev, wrb, map_single);
map_single = false;
copied -= wrb->frag_len;
+ adapter->drv_stats.dma_map_errors++;
queue_head_inc(txq);
}
return 0;
@@ -1877,7 +1878,7 @@ static void be_post_rx_frags(struct be_rx_obj *rxo, gfp_t gfp)
if (dma_mapping_error(dev, page_dmaaddr)) {
put_page(pagep);
pagep = NULL;
- rx_stats(rxo)->rx_post_fail++;
+ adapter->drv_stats.dma_map_errors++;
break;
}
page_offset = 0;
--
1.7.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v2 net-next 06/12] be2net: fix log messages in lancer FW download path
2014-09-02 4:26 [PATCH v2 net-next 00/12] be2net: patch set Sathya Perla
` (4 preceding siblings ...)
2014-09-02 4:26 ` [PATCH v2 net-next 05/12] be2net: Add a dma_mapping_error counter " Sathya Perla
@ 2014-09-02 4:26 ` Sathya Perla
2014-09-02 4:26 ` [PATCH v2 net-next 07/12] be2net: remove unncessary gotos Sathya Perla
` (5 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Sathya Perla @ 2014-09-02 4:26 UTC (permalink / raw)
To: netdev
From: Kalesh AP <kalesh.purayil@emulex.com>
Log messages in the Lancer FW download path have issues such as:
- a single message spanning multiple lines
- the success message is logged even in failure cases
- status codes are already logged in the FW cmd routines
This patch fixes these issues.
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
---
drivers/net/ethernet/emulex/benet/be_main.c | 30 +++++++++-----------------
1 files changed, 11 insertions(+), 19 deletions(-)
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index c95998f..7e89e5b 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -4076,6 +4076,7 @@ static int lancer_fw_download(struct be_adapter *adapter,
{
#define LANCER_FW_DOWNLOAD_CHUNK (32 * 1024)
#define LANCER_FW_DOWNLOAD_LOCATION "/prg"
+ struct device *dev = &adapter->pdev->dev;
struct be_dma_mem flash_cmd;
const u8 *data_ptr = NULL;
u8 *dest_image_ptr = NULL;
@@ -4088,16 +4089,14 @@ static int lancer_fw_download(struct be_adapter *adapter,
u8 change_status;
if (!IS_ALIGNED(fw->size, sizeof(u32))) {
- dev_err(&adapter->pdev->dev,
- "FW Image not properly aligned. "
- "Length must be 4 byte aligned.\n");
+ dev_err(dev, "FW image size should be multiple of 4\n");
status = -EINVAL;
goto lancer_fw_exit;
}
flash_cmd.size = sizeof(struct lancer_cmd_req_write_object)
+ LANCER_FW_DOWNLOAD_CHUNK;
- flash_cmd.va = dma_alloc_coherent(&adapter->pdev->dev, flash_cmd.size,
+ flash_cmd.va = dma_alloc_coherent(dev, flash_cmd.size,
&flash_cmd.dma, GFP_KERNEL);
if (!flash_cmd.va) {
status = -ENOMEM;
@@ -4137,33 +4136,26 @@ static int lancer_fw_download(struct be_adapter *adapter,
&add_status);
}
- dma_free_coherent(&adapter->pdev->dev, flash_cmd.size, flash_cmd.va,
- flash_cmd.dma);
+ dma_free_coherent(dev, flash_cmd.size, flash_cmd.va, flash_cmd.dma);
if (status) {
- dev_err(&adapter->pdev->dev,
- "Firmware load error. "
- "Status code: 0x%x Additional Status: 0x%x\n",
- status, add_status);
+ dev_err(dev, "Firmware load error\n");
goto lancer_fw_exit;
}
+ dev_info(dev, "Firmware flashed successfully\n");
+
if (change_status == LANCER_FW_RESET_NEEDED) {
- dev_info(&adapter->pdev->dev,
- "Resetting adapter to activate new FW\n");
+ dev_info(dev, "Resetting adapter to activate new FW\n");
status = lancer_physdev_ctrl(adapter,
PHYSDEV_CONTROL_FW_RESET_MASK);
if (status) {
- dev_err(&adapter->pdev->dev,
- "Adapter busy for FW reset.\n"
- "New FW will not be active.\n");
+ dev_err(dev, "Adapter busy, could not reset FW\n");
+ dev_err(dev, "Reboot server to activate new FW\n");
goto lancer_fw_exit;
}
} else if (change_status != LANCER_NO_RESET_NEEDED) {
- dev_err(&adapter->pdev->dev,
- "System reboot required for new FW to be active\n");
+ dev_info(dev, "Reboot server to activate new FW\n");
}
-
- dev_info(&adapter->pdev->dev, "Firmware flashed successfully\n");
lancer_fw_exit:
return status;
}
--
1.7.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v2 net-next 07/12] be2net: remove unncessary gotos
2014-09-02 4:26 [PATCH v2 net-next 00/12] be2net: patch set Sathya Perla
` (5 preceding siblings ...)
2014-09-02 4:26 ` [PATCH v2 net-next 06/12] be2net: fix log messages in lancer FW download path Sathya Perla
@ 2014-09-02 4:26 ` Sathya Perla
2014-09-02 4:26 ` [PATCH v2 net-next 08/12] be2net: define BE_MAX_MTU Sathya Perla
` (4 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Sathya Perla @ 2014-09-02 4:26 UTC (permalink / raw)
To: netdev
From: Kalesh AP <kalesh.purayil@emulex.com>
In cases where there is no extra code to handle an error, this patch replaces
gotos with a direct return statement.
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
---
drivers/net/ethernet/emulex/benet/be_main.c | 16 ++++++----------
1 files changed, 6 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 7e89e5b..cdad8bc 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -4090,18 +4090,15 @@ static int lancer_fw_download(struct be_adapter *adapter,
if (!IS_ALIGNED(fw->size, sizeof(u32))) {
dev_err(dev, "FW image size should be multiple of 4\n");
- status = -EINVAL;
- goto lancer_fw_exit;
+ return -EINVAL;
}
flash_cmd.size = sizeof(struct lancer_cmd_req_write_object)
+ LANCER_FW_DOWNLOAD_CHUNK;
flash_cmd.va = dma_alloc_coherent(dev, flash_cmd.size,
&flash_cmd.dma, GFP_KERNEL);
- if (!flash_cmd.va) {
- status = -ENOMEM;
- goto lancer_fw_exit;
- }
+ if (!flash_cmd.va)
+ return -ENOMEM;
dest_image_ptr = flash_cmd.va +
sizeof(struct lancer_cmd_req_write_object);
@@ -4139,7 +4136,7 @@ static int lancer_fw_download(struct be_adapter *adapter,
dma_free_coherent(dev, flash_cmd.size, flash_cmd.va, flash_cmd.dma);
if (status) {
dev_err(dev, "Firmware load error\n");
- goto lancer_fw_exit;
+ return be_cmd_status(status);
}
dev_info(dev, "Firmware flashed successfully\n");
@@ -4151,13 +4148,12 @@ static int lancer_fw_download(struct be_adapter *adapter,
if (status) {
dev_err(dev, "Adapter busy, could not reset FW\n");
dev_err(dev, "Reboot server to activate new FW\n");
- goto lancer_fw_exit;
}
} else if (change_status != LANCER_NO_RESET_NEEDED) {
dev_info(dev, "Reboot server to activate new FW\n");
}
-lancer_fw_exit:
- return status;
+
+ return 0;
}
#define UFI_TYPE2 2
--
1.7.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v2 net-next 08/12] be2net: define BE_MAX_MTU
2014-09-02 4:26 [PATCH v2 net-next 00/12] be2net: patch set Sathya Perla
` (6 preceding siblings ...)
2014-09-02 4:26 ` [PATCH v2 net-next 07/12] be2net: remove unncessary gotos Sathya Perla
@ 2014-09-02 4:26 ` Sathya Perla
2014-09-02 4:26 ` [PATCH v2 net-next 09/12] be2net: make be_cmd_get_regs() return a status Sathya Perla
` (3 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Sathya Perla @ 2014-09-02 4:26 UTC (permalink / raw)
To: netdev
From: Kalesh AP <kalesh.purayil@emulex.com>
This patch defines a new macro BE_MAX_MTU to make the code in be_change_mtu()
more readable.
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
---
drivers/net/ethernet/emulex/benet/be.h | 2 ++
drivers/net/ethernet/emulex/benet/be_main.c | 14 +++++++-------
2 files changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index 069bdda..5ccfce7 100644
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -86,6 +86,8 @@ static inline char *nic_name(struct pci_dev *pdev)
#define BE_MAX_JUMBO_FRAME_SIZE 9018
#define BE_MIN_MTU 256
+#define BE_MAX_MTU (BE_MAX_JUMBO_FRAME_SIZE - \
+ (ETH_HLEN + ETH_FCS_LEN))
#define BE_NUM_VLANS_SUPPORTED 64
#define BE_MAX_EQD 128u
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index cdad8bc..04a8092 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -1073,15 +1073,15 @@ static netdev_tx_t be_xmit(struct sk_buff *skb, struct net_device *netdev)
static int be_change_mtu(struct net_device *netdev, int new_mtu)
{
struct be_adapter *adapter = netdev_priv(netdev);
- if (new_mtu < BE_MIN_MTU ||
- new_mtu > (BE_MAX_JUMBO_FRAME_SIZE - (ETH_HLEN + ETH_FCS_LEN))) {
- dev_info(&adapter->pdev->dev,
- "MTU must be between %d and %d bytes\n",
- BE_MIN_MTU,
- (BE_MAX_JUMBO_FRAME_SIZE - (ETH_HLEN + ETH_FCS_LEN)));
+ struct device *dev = &adapter->pdev->dev;
+
+ if (new_mtu < BE_MIN_MTU || new_mtu > BE_MAX_MTU) {
+ dev_info(dev, "MTU must be between %d and %d bytes\n",
+ BE_MIN_MTU, BE_MAX_MTU);
return -EINVAL;
}
- dev_info(&adapter->pdev->dev, "MTU changed from %d to %d bytes\n",
+
+ dev_info(dev, "MTU changed from %d to %d bytes\n",
netdev->mtu, new_mtu);
netdev->mtu = new_mtu;
return 0;
--
1.7.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v2 net-next 09/12] be2net: make be_cmd_get_regs() return a status
2014-09-02 4:26 [PATCH v2 net-next 00/12] be2net: patch set Sathya Perla
` (7 preceding siblings ...)
2014-09-02 4:26 ` [PATCH v2 net-next 08/12] be2net: define BE_MAX_MTU Sathya Perla
@ 2014-09-02 4:26 ` Sathya Perla
2014-09-02 4:26 ` [PATCH v2 net-next 10/12] be2net: get rid of TX budget Sathya Perla
` (2 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Sathya Perla @ 2014-09-02 4:26 UTC (permalink / raw)
To: netdev
From: Vasundhara Volam <vasundhara.volam@emulex.com>
There are a few failure cases in be_cmd_get_regs() that ideally must return
an error value. This style is used across all the routines in be_cmds.c with
this routine being an exception. This patch fixes this.
Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
---
drivers/net/ethernet/emulex/benet/be_cmds.c | 10 +++++-----
drivers/net/ethernet/emulex/benet/be_cmds.h | 2 +-
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index ca9ec18..5be100d 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -1681,17 +1681,17 @@ err:
return status;
}
-void be_cmd_get_regs(struct be_adapter *adapter, u32 buf_len, void *buf)
+int be_cmd_get_regs(struct be_adapter *adapter, u32 buf_len, void *buf)
{
struct be_dma_mem get_fat_cmd;
struct be_mcc_wrb *wrb;
struct be_cmd_req_get_fat *req;
u32 offset = 0, total_size, buf_size,
log_offset = sizeof(u32), payload_len;
- int status;
+ int status = 0;
if (buf_len == 0)
- return;
+ return -EIO;
total_size = buf_len;
@@ -1700,10 +1700,9 @@ void be_cmd_get_regs(struct be_adapter *adapter, u32 buf_len, void *buf)
get_fat_cmd.size,
&get_fat_cmd.dma);
if (!get_fat_cmd.va) {
- status = -ENOMEM;
dev_err(&adapter->pdev->dev,
"Memory allocation failure while retrieving FAT data\n");
- return;
+ return -ENOMEM;
}
spin_lock_bh(&adapter->mcc_lock);
@@ -1746,6 +1745,7 @@ err:
pci_free_consistent(adapter->pdev, get_fat_cmd.size,
get_fat_cmd.va, get_fat_cmd.dma);
spin_unlock_bh(&adapter->mcc_lock);
+ return status;
}
/* Uses synchronous mcc */
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.h b/drivers/net/ethernet/emulex/benet/be_cmds.h
index 5284b82..0e11868 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.h
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.h
@@ -2101,7 +2101,7 @@ int be_cmd_get_die_temperature(struct be_adapter *adapter);
int be_cmd_get_cntl_attributes(struct be_adapter *adapter);
int be_cmd_req_native_mode(struct be_adapter *adapter);
int be_cmd_get_reg_len(struct be_adapter *adapter, u32 *log_size);
-void be_cmd_get_regs(struct be_adapter *adapter, u32 buf_len, void *buf);
+int be_cmd_get_regs(struct be_adapter *adapter, u32 buf_len, void *buf);
int be_cmd_get_fn_privileges(struct be_adapter *adapter, u32 *privilege,
u32 domain);
int be_cmd_set_fn_privileges(struct be_adapter *adapter, u32 privileges,
--
1.7.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v2 net-next 10/12] be2net: get rid of TX budget
2014-09-02 4:26 [PATCH v2 net-next 00/12] be2net: patch set Sathya Perla
` (8 preceding siblings ...)
2014-09-02 4:26 ` [PATCH v2 net-next 09/12] be2net: make be_cmd_get_regs() return a status Sathya Perla
@ 2014-09-02 4:26 ` Sathya Perla
2014-09-02 4:26 ` [PATCH v2 net-next 11/12] be2net: define macro for_all_tx_queues_on_eq() Sathya Perla
2014-09-02 4:26 ` [PATCH v2 net-next 12/12] be2net: query max_tx_qs for BE3 super-nic profile from FW Sathya Perla
11 siblings, 0 replies; 13+ messages in thread
From: Sathya Perla @ 2014-09-02 4:26 UTC (permalink / raw)
To: netdev
Enforcing a budget on the TX completion processing in NAPI doesn't
benefit performance in anyway. Just get rid of it.
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
---
drivers/net/ethernet/emulex/benet/be.h | 2 -
drivers/net/ethernet/emulex/benet/be_main.c | 30 +++++++++-----------------
2 files changed, 11 insertions(+), 21 deletions(-)
diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index 5ccfce7..d952ca2 100644
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -114,7 +114,6 @@ static inline char *nic_name(struct pci_dev *pdev)
#define MAX_ROCE_EQS 5
#define MAX_MSIX_VECTORS 32
#define MIN_MSIX_VECTORS 1
-#define BE_TX_BUDGET 256
#define BE_NAPI_WEIGHT 64
#define MAX_RX_POST BE_NAPI_WEIGHT /* Frags posted at a time */
#define RX_FRAGS_REFILL_WM (RX_Q_LEN - MAX_RX_POST)
@@ -200,7 +199,6 @@ struct be_eq_obj {
u8 idx; /* array index */
u8 msix_idx;
- u16 tx_budget;
u16 spurious_intr;
struct napi_struct napi;
struct be_adapter *adapter;
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 04a8092..53727ad 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -2143,7 +2143,6 @@ static int be_evt_queues_create(struct be_adapter *adapter)
napi_hash_add(&eqo->napi);
aic = &adapter->aic_obj[i];
eqo->adapter = adapter;
- eqo->tx_budget = BE_TX_BUDGET;
eqo->idx = i;
aic->max_eqd = BE_MAX_EQD;
aic->enable = true;
@@ -2459,20 +2458,19 @@ static inline void lancer_update_tx_err(struct be_tx_obj *txo, u32 status)
}
}
-static bool be_process_tx(struct be_adapter *adapter, struct be_tx_obj *txo,
- int budget, int idx)
+static void be_process_tx(struct be_adapter *adapter, struct be_tx_obj *txo,
+ int idx)
{
struct be_eth_tx_compl *txcp;
- int num_wrbs = 0, work_done;
+ int num_wrbs = 0, work_done = 0;
u32 compl_status;
+ u16 last_idx;
+
+ while ((txcp = be_tx_compl_get(&txo->cq))) {
+ last_idx = GET_TX_COMPL_BITS(wrb_index, txcp);
+ num_wrbs += be_tx_compl_process(adapter, txo, last_idx);
+ work_done++;
- for (work_done = 0; work_done < budget; work_done++) {
- txcp = be_tx_compl_get(&txo->cq);
- if (!txcp)
- break;
- num_wrbs += be_tx_compl_process(adapter, txo,
- GET_TX_COMPL_BITS(wrb_index,
- txcp));
compl_status = GET_TX_COMPL_BITS(status, txcp);
if (compl_status) {
if (lancer_chip(adapter))
@@ -2497,7 +2495,6 @@ static bool be_process_tx(struct be_adapter *adapter, struct be_tx_obj *txo,
tx_stats(txo)->tx_compl += work_done;
u64_stats_update_end(&tx_stats(txo)->sync_compl);
}
- return (work_done < budget); /* Done */
}
int be_poll(struct napi_struct *napi, int budget)
@@ -2506,17 +2503,12 @@ int be_poll(struct napi_struct *napi, int budget)
struct be_adapter *adapter = eqo->adapter;
int max_work = 0, work, i, num_evts;
struct be_rx_obj *rxo;
- bool tx_done;
num_evts = events_get(eqo);
/* Process all TXQs serviced by this EQ */
- for (i = eqo->idx; i < adapter->num_tx_qs; i += adapter->num_evt_qs) {
- tx_done = be_process_tx(adapter, &adapter->tx_obj[i],
- eqo->tx_budget, i);
- if (!tx_done)
- max_work = budget;
- }
+ for (i = eqo->idx; i < adapter->num_tx_qs; i += adapter->num_evt_qs)
+ be_process_tx(adapter, &adapter->tx_obj[i], i);
if (be_lock_napi(eqo)) {
/* This loop will iterate twice for EQ0 in which
--
1.7.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v2 net-next 11/12] be2net: define macro for_all_tx_queues_on_eq()
2014-09-02 4:26 [PATCH v2 net-next 00/12] be2net: patch set Sathya Perla
` (9 preceding siblings ...)
2014-09-02 4:26 ` [PATCH v2 net-next 10/12] be2net: get rid of TX budget Sathya Perla
@ 2014-09-02 4:26 ` Sathya Perla
2014-09-02 4:26 ` [PATCH v2 net-next 12/12] be2net: query max_tx_qs for BE3 super-nic profile from FW Sathya Perla
11 siblings, 0 replies; 13+ messages in thread
From: Sathya Perla @ 2014-09-02 4:26 UTC (permalink / raw)
To: netdev
Replace the for() loop that traverses all the TX queues on an EQ
with the macro for_all_tx_queues_on_eq(). With this expalnatory
name, the one line comment is not required anymore.
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
---
drivers/net/ethernet/emulex/benet/be.h | 4 ++++
drivers/net/ethernet/emulex/benet/be_main.c | 6 +++---
2 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index d952ca2..a9f239a 100644
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -621,6 +621,10 @@ extern const struct ethtool_ops be_ethtool_ops;
for (i = eqo->idx, rxo = &adapter->rx_obj[i]; i < adapter->num_rx_qs;\
i += adapter->num_evt_qs, rxo += adapter->num_evt_qs)
+#define for_all_tx_queues_on_eq(adapter, eqo, txo, i) \
+ for (i = eqo->idx, txo = &adapter->tx_obj[i]; i < adapter->num_tx_qs;\
+ i += adapter->num_evt_qs, txo += adapter->num_evt_qs)
+
#define is_mcc_eqo(eqo) (eqo->idx == 0)
#define mcc_eqo(adapter) (&adapter->eq_obj[0])
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 53727ad..f3235d1 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -2503,12 +2503,12 @@ int be_poll(struct napi_struct *napi, int budget)
struct be_adapter *adapter = eqo->adapter;
int max_work = 0, work, i, num_evts;
struct be_rx_obj *rxo;
+ struct be_tx_obj *txo;
num_evts = events_get(eqo);
- /* Process all TXQs serviced by this EQ */
- for (i = eqo->idx; i < adapter->num_tx_qs; i += adapter->num_evt_qs)
- be_process_tx(adapter, &adapter->tx_obj[i], i);
+ for_all_tx_queues_on_eq(adapter, eqo, txo, i)
+ be_process_tx(adapter, txo, i);
if (be_lock_napi(eqo)) {
/* This loop will iterate twice for EQ0 in which
--
1.7.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v2 net-next 12/12] be2net: query max_tx_qs for BE3 super-nic profile from FW
2014-09-02 4:26 [PATCH v2 net-next 00/12] be2net: patch set Sathya Perla
` (10 preceding siblings ...)
2014-09-02 4:26 ` [PATCH v2 net-next 11/12] be2net: define macro for_all_tx_queues_on_eq() Sathya Perla
@ 2014-09-02 4:26 ` Sathya Perla
11 siblings, 0 replies; 13+ messages in thread
From: Sathya Perla @ 2014-09-02 4:26 UTC (permalink / raw)
To: netdev
From: Suresh Reddy <Suresh.Reddy@emulex.com>
In the BE3 super-nic profile, the max_tx_qs value can vary for each function.
So the driver needs to query this value from FW instead of using the
pre-defined constant BE3_MAX_TX_QS.
Signed-off-by: Suresh Reddy <Suresh.Reddy@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
---
drivers/net/ethernet/emulex/benet/be_main.c | 14 ++++++++++++--
1 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index f3235d1..9eaab4e 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -3324,10 +3324,20 @@ static void BEx_get_resources(struct be_adapter *adapter,
*/
if (BE2_chip(adapter) || use_sriov || (adapter->port_num > 1) ||
!be_physfn(adapter) || (be_is_mc(adapter) &&
- !(adapter->function_caps & BE_FUNCTION_CAPS_RSS)))
+ !(adapter->function_caps & BE_FUNCTION_CAPS_RSS))) {
res->max_tx_qs = 1;
- else
+ } else if (adapter->function_caps & BE_FUNCTION_CAPS_SUPER_NIC) {
+ struct be_resources super_nic_res = {0};
+
+ /* On a SuperNIC profile, the driver needs to use the
+ * GET_PROFILE_CONFIG cmd to query the per-function TXQ limits
+ */
+ be_cmd_get_profile_config(adapter, &super_nic_res, 0);
+ /* Some old versions of BE3 FW don't report max_tx_qs value */
+ res->max_tx_qs = super_nic_res.max_tx_qs ? : BE3_MAX_TX_QS;
+ } else {
res->max_tx_qs = BE3_MAX_TX_QS;
+ }
if ((adapter->function_caps & BE_FUNCTION_CAPS_RSS) &&
!use_sriov && be_physfn(adapter))
--
1.7.1
^ permalink raw reply related [flat|nested] 13+ messages in thread