netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rusty Russell <rusty@rustcorp.com.au>
To: linux-kernel@vger.kernel.org
Cc: Rusty Russell <rusty@rustcorp.com.au>,
	"netdev" <netdev@vger.kernel.org>,
	"Michael S. Tsirkin" <mst@redhat.com>
Subject: [PATCH 3/3] virtio_ring: unify direct/indirect code paths.
Date: Thu, 11 Sep 2014 10:17:38 +0930	[thread overview]
Message-ID: <1410396458-1165-4-git-send-email-rusty@rustcorp.com.au> (raw)
In-Reply-To: <1410396458-1165-1-git-send-email-rusty@rustcorp.com.au>

virtqueue_add() populates the virtqueue descriptor table from the sgs
given.  If it uses an indirect descriptor table, then it puts a single
descriptor in the descriptor table pointing to the kmalloc'ed indirect
table where the sg is populated.

Previously vring_add_indirect() did the allocation and the simple
linear layout.  We replace that with alloc_indirect() which allocates
the indirect table then chains it like the normal descriptor table so
we can reuse the core logic.

This slows down pktgen by less than 1/2 a percent (which uses direct
descriptors), as well as vring_bench, but it's far neater.

vring_bench before:
	1061485790-1104800648(1.08254e+09+/-6.6e+06)ns
vring_bench after:
	1125610268-1183528965(1.14172e+09+/-8e+06)ns

pktgen before:
   787781-796334(793165+/-2.4e+03)pps 365-369(367.5+/-1.2)Mb/sec (365530384-369498976(3.68028e+08+/-1.1e+06)bps) errors: 0

pktgen after:
   779988-790404(786391+/-2.5e+03)pps 361-366(364.35+/-1.3)Mb/sec (361914432-366747456(3.64885e+08+/-1.2e+06)bps) errors: 0

Now, if we make force indirect descriptors by turning off any_header_sg
in virtio_net.c:

pktgen before:
  713773-721062(718374+/-2.1e+03)pps 331-334(332.95+/-0.92)Mb/sec (331190672-334572768(3.33325e+08+/-9.6e+05)bps) errors: 0
pktgen after:
  710542-719195(714898+/-2.4e+03)pps 329-333(331.15+/-1.1)Mb/sec (329691488-333706480(3.31713e+08+/-1.1e+06)bps) errors: 0

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 drivers/virtio/virtio_ring.c | 134 ++++++++++++++++++-------------------------
 1 file changed, 55 insertions(+), 79 deletions(-)

diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index 374399c62080..6d2b5310c991 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -99,18 +99,10 @@ struct vring_virtqueue
 
 #define to_vvq(_vq) container_of(_vq, struct vring_virtqueue, vq)
 
-/* Set up an indirect table of descriptors and add it to the queue. */
-static inline int vring_add_indirect(struct vring_virtqueue *vq,
-				     struct scatterlist *sgs[],
-				     unsigned int total_sg,
-				     unsigned int out_sgs,
-				     unsigned int in_sgs,
-				     gfp_t gfp)
+static struct vring_desc *alloc_indirect(unsigned int total_sg, gfp_t gfp)
 {
-	struct vring_desc *desc;
-	unsigned head;
-	struct scatterlist *sg;
-	int i, n;
+ 	struct vring_desc *desc;
+	unsigned int i;
 
 	/*
 	 * We require lowmem mappings for the descriptors because
@@ -119,51 +111,13 @@ static inline int vring_add_indirect(struct vring_virtqueue *vq,
 	 */
 	gfp &= ~(__GFP_HIGHMEM | __GFP_HIGH);
 
-	desc = kmalloc(total_sg * sizeof(struct vring_desc), gfp);
-	if (!desc)
-		return -ENOMEM;
-
-	/* Transfer entries from the sg lists into the indirect page */
-	i = 0;
-	for (n = 0; n < out_sgs; n++) {
-		for (sg = sgs[n]; sg; sg = sg_next(sg)) {
-			desc[i].flags = VRING_DESC_F_NEXT;
-			desc[i].addr = sg_phys(sg);
-			desc[i].len = sg->length;
-			desc[i].next = i+1;
-			i++;
-		}
-	}
-	for (; n < (out_sgs + in_sgs); n++) {
-		for (sg = sgs[n]; sg; sg = sg_next(sg)) {
-			desc[i].flags = VRING_DESC_F_NEXT|VRING_DESC_F_WRITE;
-			desc[i].addr = sg_phys(sg);
-			desc[i].len = sg->length;
-			desc[i].next = i+1;
-			i++;
-		}
-	}
-	BUG_ON(i != total_sg);
-
-	/* Last one doesn't continue. */
-	desc[i-1].flags &= ~VRING_DESC_F_NEXT;
-	desc[i-1].next = 0;
-
-	/* We're about to use a buffer */
-	vq->vq.num_free--;
-
-	/* Use a single buffer which doesn't continue */
-	head = vq->free_head;
-	vq->vring.desc[head].flags = VRING_DESC_F_INDIRECT;
-	vq->vring.desc[head].addr = virt_to_phys(desc);
-	/* kmemleak gives a false positive, as it's hidden by virt_to_phys */
-	kmemleak_ignore(desc);
-	vq->vring.desc[head].len = i * sizeof(struct vring_desc);
-
-	/* Update free pointer */
-	vq->free_head = vq->vring.desc[head].next;
+ 	desc = kmalloc(total_sg * sizeof(struct vring_desc), gfp);
+ 	if (!desc)
+		return NULL;
 
-	return head;
+	for (i = 0; i < total_sg; i++)
+		desc[i].next = i+1;
+	return desc;
 }
 
 static inline int virtqueue_add(struct virtqueue *_vq,
@@ -176,8 +130,10 @@ static inline int virtqueue_add(struct virtqueue *_vq,
 {
 	struct vring_virtqueue *vq = to_vvq(_vq);
 	struct scatterlist *sg;
-	unsigned int i, n, avail, uninitialized_var(prev);
+	struct vring_desc *desc;
+	unsigned int i, n, avail, descs_used, uninitialized_var(prev);
 	int head;
+	bool indirect;
 
 	START_USE(vq);
 
@@ -201,21 +157,40 @@ static inline int virtqueue_add(struct virtqueue *_vq,
 	}
 #endif
 
+	BUG_ON(total_sg > vq->vring.num);
+	BUG_ON(total_sg == 0);
+
+	head = vq->free_head;
+
 	/* If the host supports indirect descriptor tables, and we have multiple
 	 * buffers, then go indirect. FIXME: tune this threshold */
-	if (vq->indirect && total_sg > 1 && vq->vq.num_free) {
-		head = vring_add_indirect(vq, sgs, total_sg, 
-					  out_sgs, in_sgs, gfp);
-		if (likely(head >= 0))
-			goto add_head;
+	if (vq->indirect && total_sg > 1 && vq->vq.num_free)
+		desc = alloc_indirect(total_sg, gfp);
+	else
+		desc = NULL;
+
+	if (desc) {
+		/* Use a single buffer which doesn't continue */
+		vq->vring.desc[head].flags = VRING_DESC_F_INDIRECT;
+		vq->vring.desc[head].addr = virt_to_phys(desc);
+		/* avoid kmemleak false positive (hidden by virt_to_phys) */
+		kmemleak_ignore(desc);
+		vq->vring.desc[head].len = total_sg * sizeof(struct vring_desc);
+
+		/* Set up rest to use this indirect table. */
+		i = 0;
+		descs_used = 1;
+		indirect = true;
+	} else {
+		desc = vq->vring.desc;
+		i = head;
+		descs_used = total_sg;
+		indirect = false;
 	}
 
-	BUG_ON(total_sg > vq->vring.num);
-	BUG_ON(total_sg == 0);
-
-	if (vq->vq.num_free < total_sg) {
+	if (vq->vq.num_free < descs_used) {
 		pr_debug("Can't add buf len %i - avail = %i\n",
-			 total_sg, vq->vq.num_free);
+			 descs_used, vq->vq.num_free);
 		/* FIXME: for historical reasons, we force a notify here if
 		 * there are outgoing parts to the buffer.  Presumably the
 		 * host should service the ring ASAP. */
@@ -226,34 +201,35 @@ static inline int virtqueue_add(struct virtqueue *_vq,
 	}
 
 	/* We're about to use some buffers from the free list. */
-	vq->vq.num_free -= total_sg;
+	vq->vq.num_free -= descs_used;
 
-	head = i = vq->free_head;
 	for (n = 0; n < out_sgs; n++) {
 		for (sg = sgs[n]; sg; sg = sg_next(sg)) {
-			vq->vring.desc[i].flags = VRING_DESC_F_NEXT;
-			vq->vring.desc[i].addr = sg_phys(sg);
-			vq->vring.desc[i].len = sg->length;
+			desc[i].flags = VRING_DESC_F_NEXT;
+			desc[i].addr = sg_phys(sg);
+			desc[i].len = sg->length;
 			prev = i;
-			i = vq->vring.desc[i].next;
+			i = desc[i].next;
 		}
 	}
 	for (; n < (out_sgs + in_sgs); n++) {
 		for (sg = sgs[n]; sg; sg = sg_next(sg)) {
-			vq->vring.desc[i].flags = VRING_DESC_F_NEXT|VRING_DESC_F_WRITE;
-			vq->vring.desc[i].addr = sg_phys(sg);
-			vq->vring.desc[i].len = sg->length;
+			desc[i].flags = VRING_DESC_F_NEXT|VRING_DESC_F_WRITE;
+			desc[i].addr = sg_phys(sg);
+			desc[i].len = sg->length;
 			prev = i;
-			i = vq->vring.desc[i].next;
+			i = desc[i].next;
 		}
 	}
 	/* Last one doesn't continue. */
-	vq->vring.desc[prev].flags &= ~VRING_DESC_F_NEXT;
+	desc[prev].flags &= ~VRING_DESC_F_NEXT;
 
 	/* Update free pointer */
-	vq->free_head = i;
+	if (indirect)
+		vq->free_head = vq->vring.desc[head].next;
+	else
+		vq->free_head = i;
 
-add_head:
 	/* Set token. */
 	vq->data[head] = data;
 
-- 
1.9.1

  parent reply	other threads:[~2014-09-11  0:47 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1410396458-1165-1-git-send-email-rusty@rustcorp.com.au>
2014-09-11  0:47 ` [PATCH 1/3] virtio_net: pass well-formed sgs to virtqueue_add_*() Rusty Russell
2014-09-12 21:54   ` David Miller
2014-09-13  5:40     ` Rusty Russell
2014-09-13 16:53       ` David Miller
2014-09-16  0:48         ` Rusty Russell
2014-09-11  0:47 ` [PATCH 2/3] virtio_ring: assume sgs are always well-formed Rusty Russell
2014-09-11  0:47 ` Rusty Russell [this message]
2014-09-03  4:29 [PATCH 0/3] virtio: simplify virtio_ring Rusty Russell
2014-09-03  4:29 ` [PATCH 3/3] virtio_ring: unify direct/indirect code paths Rusty Russell
2014-09-04  1:59   ` Andy Lutomirski
2014-09-05  2:55     ` Rusty Russell
2014-09-05 10:55   ` Paolo Bonzini
2014-09-08 17:32     ` Andy Lutomirski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1410396458-1165-4-git-send-email-rusty@rustcorp.com.au \
    --to=rusty@rustcorp.com.au \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mst@redhat.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).