From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sathya Perla Subject: [PATCH net-next 0/8] be2net: patch set Date: Fri, 12 Sep 2014 17:39:13 +0530 Message-ID: <1410523761-1744-1-git-send-email-sathya.perla@emulex.com> Mime-Version: 1.0 Content-Type: text/plain To: Return-path: Received: from cmexedge2.ext.emulex.com ([138.239.224.100]:21722 "EHLO CMEXEDGE2.ext.emulex.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753743AbaILMGs (ORCPT ); Fri, 12 Sep 2014 08:06:48 -0400 Sender: netdev-owner@vger.kernel.org List-ID: Patch 1 fixes some minor issues with log messages in be2net. Patch 2 replaces strcpy() calls with strlcpy() to avoid possible buffer overflow. Patch 3 improves the RX buffer posting scheme for jumbo frames. Patch 4 replaces the use of v0 of SET_FLOW_CONTROL cmd with v1 to receive a definitive completion status from FW. Patch 5 adds support for ethtool "-m" ethtool option. Patch 6 fixes port-type reporting via ethtool get_settings for QSFP/SFP+ interfaces. Patch 7 fixes the usage of MODIFY_EQD FW cmd to target a max of 8 EQs on Lancer chip. Patch 8 enables PCIe error reporting even for VFs. Pls consider applying this patch set to net-next. Thanks. Kalesh AP (3): be2net: fix RX fragment posting for jumbo frames be2net: send a max of 8 EQs to be_cmd_modify_eqd() on Lancer be2net: enable PCIe error reporting on VFs too Mark Leonard (1): be2net: add ethtool "-m" option support Ravikumar Nelavelli (1): be2net: fix port-type reporting in get_settings Suresh Reddy (1): be2net: use v1 of SET_FLOW_CONTROL command Vasundhara Volam (2): be2net: fix some log messages be2net: replace strcpy with strlcpy drivers/net/ethernet/emulex/benet/be.h | 2 +- drivers/net/ethernet/emulex/benet/be_cmds.c | 112 ++++++++++++++++++++++-- drivers/net/ethernet/emulex/benet/be_cmds.h | 41 +++++---- drivers/net/ethernet/emulex/benet/be_ethtool.c | 105 +++++++++++++++++++---- drivers/net/ethernet/emulex/benet/be_main.c | 47 ++++++----- 5 files changed, 242 insertions(+), 65 deletions(-)