From: Florian Fainelli <f.fainelli@gmail.com>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, Florian Fainelli <f.fainelli@gmail.com>
Subject: [PATCH net-next 1/4] net: dsa: allow switch drivers to implement suspend/resume hooks
Date: Thu, 18 Sep 2014 17:31:22 -0700 [thread overview]
Message-ID: <1411086685-18684-2-git-send-email-f.fainelli@gmail.com> (raw)
In-Reply-To: <1411086685-18684-1-git-send-email-f.fainelli@gmail.com>
Add an abstraction layer to suspend/resume switch devices, doing the
following split:
- suspend/resume the slave network devices and their corresponding PHY
devices
- suspend/resume the switch hardware using switch driver callbacks
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
include/net/dsa.h | 6 ++++
net/dsa/dsa.c | 80 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
net/dsa/dsa_priv.h | 2 ++
net/dsa/slave.c | 31 +++++++++++++++++++++
4 files changed, 119 insertions(+)
diff --git a/include/net/dsa.h b/include/net/dsa.h
index c779e9bba1b3..0a34bf3d1ddd 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -209,6 +209,12 @@ struct dsa_switch_driver {
void (*get_ethtool_stats)(struct dsa_switch *ds,
int port, uint64_t *data);
int (*get_sset_count)(struct dsa_switch *ds);
+
+ /*
+ * Suspend and resume
+ */
+ int (*suspend)(struct dsa_switch *ds);
+ int (*resume)(struct dsa_switch *ds);
};
void register_switch_driver(struct dsa_switch_driver *type);
diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c
index 6e40928ec0e7..6905f2d84c44 100644
--- a/net/dsa/dsa.c
+++ b/net/dsa/dsa.c
@@ -238,6 +238,49 @@ static void dsa_switch_destroy(struct dsa_switch *ds)
{
}
+static int dsa_switch_suspend(struct dsa_switch *ds)
+{
+ int i, ret = 0;
+
+ /* Suspend slave network devices */
+ for (i = 0; i < DSA_MAX_PORTS; i++) {
+ if (!(ds->phys_port_mask & (1 << i)))
+ continue;
+
+ ret = dsa_slave_suspend(ds->ports[i]);
+ if (ret)
+ return ret;
+ }
+
+ if (ds->drv->suspend)
+ ret = ds->drv->suspend(ds);
+
+ return ret;
+}
+
+static int dsa_switch_resume(struct dsa_switch *ds)
+{
+ int i, ret = 0;
+
+ if (ds->drv->resume)
+ ret = ds->drv->resume(ds);
+
+ if (ret)
+ return ret;
+
+ /* Resume slave network devices */
+ for (i = 0; i < DSA_MAX_PORTS; i++) {
+ if (!(ds->phys_port_mask & (1 << i)))
+ continue;
+
+ ret = dsa_slave_resume(ds->ports[i]);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
/* link polling *************************************************************/
static void dsa_link_poll_work(struct work_struct *ugly)
@@ -650,6 +693,42 @@ static struct packet_type dsa_pack_type __read_mostly = {
.func = dsa_switch_rcv,
};
+#ifdef CONFIG_PM_SLEEP
+static int dsa_suspend(struct device *d)
+{
+ struct platform_device *pdev = to_platform_device(d);
+ struct dsa_switch_tree *dst = platform_get_drvdata(pdev);
+ int i, ret = 0;
+
+ for (i = 0; i < dst->pd->nr_chips; i++) {
+ struct dsa_switch *ds = dst->ds[i];
+
+ if (ds != NULL)
+ ret = dsa_switch_suspend(ds);
+ }
+
+ return ret;
+}
+
+static int dsa_resume(struct device *d)
+{
+ struct platform_device *pdev = to_platform_device(d);
+ struct dsa_switch_tree *dst = platform_get_drvdata(pdev);
+ int i, ret = 0;
+
+ for (i = 0; i < dst->pd->nr_chips; i++) {
+ struct dsa_switch *ds = dst->ds[i];
+
+ if (ds != NULL)
+ ret = dsa_switch_resume(ds);
+ }
+
+ return ret;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(dsa_pm_ops, dsa_suspend, dsa_resume);
+
static const struct of_device_id dsa_of_match_table[] = {
{ .compatible = "brcm,bcm7445-switch-v4.0" },
{ .compatible = "marvell,dsa", },
@@ -665,6 +744,7 @@ static struct platform_driver dsa_driver = {
.name = "dsa",
.owner = THIS_MODULE,
.of_match_table = dsa_of_match_table,
+ .pm = &dsa_pm_ops,
},
};
diff --git a/net/dsa/dsa_priv.h b/net/dsa/dsa_priv.h
index f90899e8ab5a..dc9756d3154c 100644
--- a/net/dsa/dsa_priv.h
+++ b/net/dsa/dsa_priv.h
@@ -56,6 +56,8 @@ void dsa_slave_mii_bus_init(struct dsa_switch *ds);
struct net_device *dsa_slave_create(struct dsa_switch *ds,
struct device *parent,
int port, char *name);
+int dsa_slave_suspend(struct net_device *slave_dev);
+int dsa_slave_resume(struct net_device *slave_dev);
/* tag_dsa.c */
extern const struct dsa_device_ops dsa_netdev_ops;
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 90c9689ed362..e11c9bdca6e6 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -408,6 +408,37 @@ static void dsa_slave_phy_setup(struct dsa_slave_priv *p,
p->phy->addr, p->phy->drv->name);
}
+int dsa_slave_suspend(struct net_device *slave_dev)
+{
+ struct dsa_slave_priv *p = netdev_priv(slave_dev);
+
+ netif_device_detach(slave_dev);
+
+ if (p->phy) {
+ phy_stop(p->phy);
+ p->old_pause = -1;
+ p->old_link = -1;
+ p->old_duplex = -1;
+ phy_suspend(p->phy);
+ }
+
+ return 0;
+}
+
+int dsa_slave_resume(struct net_device *slave_dev)
+{
+ struct dsa_slave_priv *p = netdev_priv(slave_dev);
+
+ netif_device_attach(slave_dev);
+
+ if (p->phy) {
+ phy_resume(p->phy);
+ phy_start(p->phy);
+ }
+
+ return 0;
+}
+
struct net_device *
dsa_slave_create(struct dsa_switch *ds, struct device *parent,
int port, char *name)
--
1.9.1
next prev parent reply other threads:[~2014-09-19 0:31 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-19 0:31 [PATCH net-next 0/4] dsa: Broadcom SF2 suspend/resume and WoL Florian Fainelli
2014-09-19 0:31 ` Florian Fainelli [this message]
2014-09-19 0:31 ` [PATCH net-next 2/4] net: dsa: bcm_sf2: add suspend/resume callbacks Florian Fainelli
2014-09-19 0:31 ` [PATCH net-next 3/4] net: dsa: add {get,set}_wol callbacks to slave devices Florian Fainelli
2014-09-19 0:31 ` [PATCH net-next 4/4] net: dsa: bcm_sf2: add support for Wake-on-LAN Florian Fainelli
2014-09-22 18:41 ` [PATCH net-next 0/4] dsa: Broadcom SF2 suspend/resume and WoL David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1411086685-18684-2-git-send-email-f.fainelli@gmail.com \
--to=f.fainelli@gmail.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).