[PATCH] net: bcmgenet: Fix compile warning

[Tobias Klauser <tklauser@distanz.ch>]

bcmgenet_wol_resume() is only used in bcmgenet_resume(), which is only
defined when CONFIG_PM_SLEEP is enabled. This leads to the following
compile warning when building with !CONFIG_PM_SLEEP:

drivers/net/ethernet/broadcom/genet/bcmgenet.c:1967:12: warning: ‘bcmgenet_wol_resume’ defined but not used [-Wunused-function]

Since bcmgenet_resume() is the only user of bcmgenet_wol_resume(), fix
this by directly inlining the function there.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 23 +++++++----------------
 1 file changed, 7 insertions(+), 16 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 313c400..e852d20 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -1964,19 +1964,6 @@ static void bcmgenet_set_hw_addr(struct bcmgenet_priv *priv,
 	bcmgenet_umac_writel(priv, (addr[4] << 8) | addr[5], UMAC_MAC1);
 }
 
-static int bcmgenet_wol_resume(struct bcmgenet_priv *priv)
-{
-	/* From WOL-enabled suspend, switch to regular clock */
-	if (priv->wolopts)
-		clk_disable_unprepare(priv->clk_wol);
-
-	phy_init_hw(priv->phydev);
-	/* Speed settings must be restored */
-	bcmgenet_mii_config(priv->dev);
-
-	return 0;
-}
-
 /* Returns a reusable dma control register value */
 static u32 bcmgenet_dma_disable(struct bcmgenet_priv *priv)
 {
@@ -2681,9 +2668,13 @@ static int bcmgenet_resume(struct device *d)
 	if (ret)
 		goto out_clk_disable;
 
-	ret = bcmgenet_wol_resume(priv);
-	if (ret)
-		goto out_clk_disable;
+	/* From WOL-enabled suspend, switch to regular clock */
+	if (priv->wolopts)
+		clk_disable_unprepare(priv->clk_wol);
+
+	phy_init_hw(priv->phydev);
+	/* Speed settings must be restored */
+	bcmgenet_mii_config(priv->dev);
 
 	/* disable ethernet MAC while updating its registers */
 	umac_enable_set(priv, CMD_TX_EN | CMD_RX_EN, false);
-- 
2.0.1