From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Mitch Williams <mitch.a.williams@intel.com>,
netdev@vger.kernel.org, nhorman@redhat.com, sassmann@redhat.com,
jogreene@redhat.com,
Catherine Sullivan <catherine.sullivan@intel.com>,
Shannon Nelson <shannon.nelson@intel.com>,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next 7/9] i40e: Add 10GBaseT support
Date: Thu, 23 Oct 2014 21:10:04 -0700 [thread overview]
Message-ID: <1414123806-20049-8-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <1414123806-20049-1-git-send-email-jeffrey.t.kirsher@intel.com>
From: Mitch Williams <mitch.a.williams@intel.com>
Add driver support for 10GBaseT device.
Change-ID: I4be6ed847ac0bddd220b9878a95c523b32038174
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Tested-by: Jim Young <jamesx.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/i40e/i40e_common.c | 1 +
drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 33 ++++++++++++++++++++++----
drivers/net/ethernet/intel/i40e/i40e_main.c | 4 ++++
drivers/net/ethernet/intel/i40e/i40e_type.h | 1 +
4 files changed, 34 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c
index c23e377..c49416c 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_common.c
@@ -50,6 +50,7 @@ static i40e_status i40e_set_mac_type(struct i40e_hw *hw)
case I40E_DEV_ID_QSFP_A:
case I40E_DEV_ID_QSFP_B:
case I40E_DEV_ID_QSFP_C:
+ case I40E_DEV_ID_10G_BASE_T:
hw->mac.type = I40E_MAC_XL710;
break;
case I40E_DEV_ID_VF:
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 1dda467..12adc08 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -264,6 +264,14 @@ static int i40e_get_settings(struct net_device *netdev,
ecmd->supported = SUPPORTED_10000baseKR_Full;
ecmd->advertising = ADVERTISED_10000baseKR_Full;
break;
+ case I40E_DEV_ID_10G_BASE_T:
+ ecmd->supported = SUPPORTED_10000baseT_Full |
+ SUPPORTED_1000baseT_Full |
+ SUPPORTED_100baseT_Full;
+ ecmd->advertising = ADVERTISED_10000baseT_Full |
+ ADVERTISED_1000baseT_Full |
+ ADVERTISED_100baseT_Full;
+ break;
default:
/* all the rest are 10G/1G */
ecmd->supported = SUPPORTED_10000baseT_Full |
@@ -322,9 +330,13 @@ static int i40e_get_settings(struct net_device *netdev,
case I40E_PHY_TYPE_10GBASE_CR1:
case I40E_PHY_TYPE_10GBASE_T:
ecmd->supported = SUPPORTED_Autoneg |
- SUPPORTED_10000baseT_Full;
+ SUPPORTED_10000baseT_Full |
+ SUPPORTED_1000baseT_Full |
+ SUPPORTED_100baseT_Full;
ecmd->advertising = ADVERTISED_Autoneg |
- ADVERTISED_10000baseT_Full;
+ ADVERTISED_10000baseT_Full |
+ ADVERTISED_1000baseT_Full |
+ ADVERTISED_100baseT_Full;
break;
case I40E_PHY_TYPE_XAUI:
case I40E_PHY_TYPE_XFI:
@@ -335,14 +347,22 @@ static int i40e_get_settings(struct net_device *netdev,
case I40E_PHY_TYPE_1000BASE_KX:
case I40E_PHY_TYPE_1000BASE_T:
ecmd->supported = SUPPORTED_Autoneg |
- SUPPORTED_1000baseT_Full;
+ SUPPORTED_10000baseT_Full |
+ SUPPORTED_1000baseT_Full |
+ SUPPORTED_100baseT_Full;
ecmd->advertising = ADVERTISED_Autoneg |
- ADVERTISED_1000baseT_Full;
+ ADVERTISED_10000baseT_Full |
+ ADVERTISED_1000baseT_Full |
+ ADVERTISED_100baseT_Full;
break;
case I40E_PHY_TYPE_100BASE_TX:
ecmd->supported = SUPPORTED_Autoneg |
+ SUPPORTED_10000baseT_Full |
+ SUPPORTED_1000baseT_Full |
SUPPORTED_100baseT_Full;
ecmd->advertising = ADVERTISED_Autoneg |
+ ADVERTISED_10000baseT_Full |
+ ADVERTISED_1000baseT_Full |
ADVERTISED_100baseT_Full;
break;
case I40E_PHY_TYPE_SGMII:
@@ -426,6 +446,9 @@ no_valid_phy_type:
case I40E_LINK_SPEED_1GB:
ethtool_cmd_speed_set(ecmd, SPEED_1000);
break;
+ case I40E_LINK_SPEED_100MB:
+ ethtool_cmd_speed_set(ecmd, SPEED_100);
+ break;
default:
break;
}
@@ -528,7 +551,7 @@ static int i40e_set_settings(struct net_device *netdev,
}
/* If autoneg is currently enabled */
if (hw->phy.link_info.an_info & I40E_AQ_AN_COMPLETED) {
- config.abilities = abilities.abilities |
+ config.abilities = abilities.abilities &
~I40E_AQ_PHY_ENABLE_AN;
change = true;
}
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 1fbbe11..9d36d10 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -74,6 +74,7 @@ static const struct pci_device_id i40e_pci_tbl[] = {
{PCI_VDEVICE(INTEL, I40E_DEV_ID_QSFP_A), 0},
{PCI_VDEVICE(INTEL, I40E_DEV_ID_QSFP_B), 0},
{PCI_VDEVICE(INTEL, I40E_DEV_ID_QSFP_C), 0},
+ {PCI_VDEVICE(INTEL, I40E_DEV_ID_10G_BASE_T), 0},
/* required last entry */
{0, }
};
@@ -4449,6 +4450,9 @@ static void i40e_print_link_message(struct i40e_vsi *vsi, bool isup)
case I40E_LINK_SPEED_1GB:
strlcpy(speed, "1000 Mbps", SPEED_SIZE);
break;
+ case I40E_LINK_SPEED_100MB:
+ strncpy(speed, "100 Mbps", SPEED_SIZE);
+ break;
default:
break;
}
diff --git a/drivers/net/ethernet/intel/i40e/i40e_type.h b/drivers/net/ethernet/intel/i40e/i40e_type.h
index ce04d90..3a237c3 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_type.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_type.h
@@ -43,6 +43,7 @@
#define I40E_DEV_ID_QSFP_A 0x1583
#define I40E_DEV_ID_QSFP_B 0x1584
#define I40E_DEV_ID_QSFP_C 0x1585
+#define I40E_DEV_ID_10G_BASE_T 0x1586
#define I40E_DEV_ID_VF 0x154C
#define I40E_DEV_ID_VF_HV 0x1571
--
1.9.3
next prev parent reply other threads:[~2014-10-24 4:10 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-24 4:09 [net-next 0/9][pull request] Intel Wired LAN Driver Updates 2014-10-23 Jeff Kirsher
2014-10-24 4:09 ` [net-next 1/9] i40e: mask phy events Jeff Kirsher
2014-10-24 4:09 ` [net-next 2/9] i40e: enable LSE poke and simplify link state Jeff Kirsher
2014-10-24 4:10 ` [net-next 3/9] i40e/i40evf: Fix whitespace indentation Jeff Kirsher
2014-10-24 4:10 ` [net-next 4/9] i40e/i40evf: Use usleep_range() instead of udelay() Jeff Kirsher
2014-10-24 4:10 ` [net-next 5/9] i40e: Fix a bug where Rx would stop after some time Jeff Kirsher
2014-10-24 4:10 ` [net-next 6/9] i40e: process link events when setting up switch Jeff Kirsher
2014-10-24 4:10 ` Jeff Kirsher [this message]
2014-10-24 4:10 ` [net-next 8/9] i40e: Moving variable declaration out of the loops Jeff Kirsher
2014-10-24 12:20 ` Sergei Shtylyov
2014-10-24 13:10 ` David Laight
2014-10-24 4:10 ` [net-next 9/9] i40e: Bump version Jeff Kirsher
2014-10-24 20:43 ` [net-next 0/9][pull request] Intel Wired LAN Driver Updates 2014-10-23 David Miller
2014-10-24 20:45 ` Jeff Kirsher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1414123806-20049-8-git-send-email-jeffrey.t.kirsher@intel.com \
--to=jeffrey.t.kirsher@intel.com \
--cc=catherine.sullivan@intel.com \
--cc=davem@davemloft.net \
--cc=jogreene@redhat.com \
--cc=mitch.a.williams@intel.com \
--cc=netdev@vger.kernel.org \
--cc=nhorman@redhat.com \
--cc=sassmann@redhat.com \
--cc=shannon.nelson@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).