[PATCH v3 00/15] net: dsa: Fixes and enhancements

[PATCH v3 00/15] net: dsa: Fixes and enhancements

[Guenter Roeck]

Patch 01/15 addresses a bug indicated by an an annoying and unhelpful
log message.

Patches 02/15 and 03/15 are minor enhancements, adding support for
known switch revisions.

Patches 04/15 and 05/15 add support for MV88E6352 and MV88E6176.

Patch 06/15 adds support for hardware monitoring, specifically for
reporting the chip temperature, to the dsa subsystem.

Patches 07/15 and 08/15 implement hardware monitoring for MV88E6352,
MV88E6176, MV88E6123, MV88E6161, and MV88E6165.

Patch 09/15 and 10/15 add support for EEPROM access to the DSA subsystem.

Patch 11/15 implements EEPROM access for MV88E6352 and MV88E6176.

Patch 12/15 adds support for reading switch registers to the DSA
subsystem.

Patches 13/15 amd 14/15 implement support for reading switch registers
to the drivers for MV88E6352, MV88E6176, MV88E6123, MV88E6161, and MV88E6165.

Patch 15/15 adds support for reading additional RMON registers to the drivers
for  MV88E6352, MV88E6176, MV88E6123, MV88E6161, and MV88E6165.

The series was tested on top of v3.18-rc2 in an x86 system with MV88E6352.
Testing in systems with 88E6131, 88E6060 and MV88E6165 was done earlier
(I don't have access to those systems right now). The series was also build
tested using my build system at http://server.roeck-us.net:8010/builders.
Look into the 'dsa' column for build results.

The series merges cleanly into net-next as of today (10/29).

v3:
- Fix bug in eeprom patches seen if devicetree is enabled:
  eeprom-length property is attached to switch devicetree node,
  not to dsa node, and there was a compile error.
v2:
- Made reporting chip temperatures through the hwmon subsystem optional
  with new Kconfig option
- Changed the hwmon chip name to <network device name>_dsa<index>
- Made EEPROM presence and size configurable through platform and devicetree
  data
- Various minor changes and fixes (see individual patches for details)

----------------------------------------------------------------
The following changes since commit cac7f2429872d3733dc3f9915857b1691da2eb2f:

  Linux 3.18-rc2 (2014-10-26 16:48:41 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git dsa

for you to fetch changes up to 245472a4f3ca2a68c5632f2c37da41aa2d3fb2f0:

  net: dsa: Provide additional RMON statistics (2014-10-29 08:55:37 -0700)

----------------------------------------------------------------
Guenter Roeck (15):
      net: dsa: Don't set skb->protocol on outgoing tagged packets
      net: dsa: Report known silicon revisions for Marvell 88E6060
      net: dsa: Report known silicon revisions for Marvell 88E6131
      net: dsa: Add support for Marvell 88E6352
      net: dsa/mv88e6352: Add support for MV88E6176
      net: dsa: Add support for reporting switch chip temperatures
      net: dsa/mv88e6352: Report chip temperature
      net: dsa/mv88e6123_61_65: Report chip temperature
      net: dsa: Add support for switch EEPROM access
      dsa: Add new optional devicetree property to describe EEPROM size
      net: dsa/mv88e6352: Implement EEPROM access functions
      net: dsa: Add support for reading switch registers with ethtool
      net: dsa/mv88e6123_61_65: Add support for reading switch registers
      net: dsa/mv88e6352: Add support for reading switch registers
      net: dsa: Provide additional RMON statistics

 Documentation/devicetree/bindings/net/dsa/dsa.txt |   9 +-
 MAINTAINERS                                       |   5 +
 drivers/net/dsa/Kconfig                           |   9 +
 drivers/net/dsa/Makefile                          |   3 +
 drivers/net/dsa/mv88e6060.c                       |   5 +-
 drivers/net/dsa/mv88e6123_61_65.c                 |  73 +-
 drivers/net/dsa/mv88e6131.c                       |  12 +-
 drivers/net/dsa/mv88e6352.c                       | 788 ++++++++++++++++++++++
 drivers/net/dsa/mv88e6xxx.c                       |  53 +-
 drivers/net/dsa/mv88e6xxx.h                       |  15 +
 include/net/dsa.h                                 |  33 +
 net/dsa/Kconfig                                   |  11 +
 net/dsa/dsa.c                                     | 135 ++++
 net/dsa/slave.c                                   |  64 ++
 net/dsa/tag_dsa.c                                 |   2 -
 net/dsa/tag_edsa.c                                |   2 -
 net/dsa/tag_trailer.c                             |   2 -
 17 files changed, 1202 insertions(+), 19 deletions(-)
 create mode 100644 drivers/net/dsa/mv88e6352.c

[PATCH v3 01/15] net: dsa: Don't set skb->protocol on outgoing tagged packets

[Guenter Roeck]

Setting skb->protocol to a private protocol type may result in warning
messages such as
	e1000e 0000:00:19.0 em1: checksum_partial proto=dada!

This happens if the L3 protocol is IP or IPv6 and skb->ip_summed is set
to CHECKSUM_PARTIAL. Looking through the code, it appears that changing
skb->protocol for transmitted packets is not necessary and may actually
be harmful. For example, it prevents purposely unmodified (from a DSA
perspective) network drivers from properly setting up their transmit
checksum offload pointers since they inspect skb->protocol to set up the
IPv4 header or IPv6 header pointers. So don't unnecessarily change the
protocol field.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v3:
- Updated description
v2:
- No change

 net/dsa/tag_dsa.c     | 2 --
 net/dsa/tag_edsa.c    | 2 --
 net/dsa/tag_trailer.c | 2 --
 3 files changed, 6 deletions(-)

diff --git a/net/dsa/tag_dsa.c b/net/dsa/tag_dsa.c
index ce90c8b..2dab270 100644
--- a/net/dsa/tag_dsa.c
+++ b/net/dsa/tag_dsa.c
@@ -63,8 +63,6 @@ static netdev_tx_t dsa_xmit(struct sk_buff *skb, struct net_device *dev)
 		dsa_header[3] = 0x00;
 	}
 
-	skb->protocol = htons(ETH_P_DSA);
-
 	skb->dev = p->parent->dst->master_netdev;
 	dev_queue_xmit(skb);
 
diff --git a/net/dsa/tag_edsa.c b/net/dsa/tag_edsa.c
index 94fcce7..9aeda59 100644
--- a/net/dsa/tag_edsa.c
+++ b/net/dsa/tag_edsa.c
@@ -76,8 +76,6 @@ static netdev_tx_t edsa_xmit(struct sk_buff *skb, struct net_device *dev)
 		edsa_header[7] = 0x00;
 	}
 
-	skb->protocol = htons(ETH_P_EDSA);
-
 	skb->dev = p->parent->dst->master_netdev;
 	dev_queue_xmit(skb);
 
diff --git a/net/dsa/tag_trailer.c b/net/dsa/tag_trailer.c
index 115fdca..e268f9d 100644
--- a/net/dsa/tag_trailer.c
+++ b/net/dsa/tag_trailer.c
@@ -57,8 +57,6 @@ static netdev_tx_t trailer_xmit(struct sk_buff *skb, struct net_device *dev)
 	trailer[2] = 0x10;
 	trailer[3] = 0x00;
 
-	nskb->protocol = htons(ETH_P_TRAILER);
-
 	nskb->dev = p->parent->dst->master_netdev;
 	dev_queue_xmit(nskb);
 
-- 
1.9.1

[PATCH v3 02/15] net: dsa: Report known silicon revisions for Marvell 88E6060

[Guenter Roeck]

Report known silicon revisions when probing Marvell 88E6060 switches.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v3:
- No change
v2:
- No change

 drivers/net/dsa/mv88e6060.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c
index 05b0ca3..c29aebe 100644
--- a/drivers/net/dsa/mv88e6060.c
+++ b/drivers/net/dsa/mv88e6060.c
@@ -69,8 +69,11 @@ static char *mv88e6060_probe(struct device *host_dev, int sw_addr)
 
 	ret = mdiobus_read(bus, sw_addr + REG_PORT(0), 0x03);
 	if (ret >= 0) {
-		ret &= 0xfff0;
 		if (ret == 0x0600)
+			return "Marvell 88E6060 (A0)";
+		if (ret == 0x0601 || ret == 0x0602)
+			return "Marvell 88E6060 (B0)";
+		if ((ret & 0xfff0) == 0x0600)
 			return "Marvell 88E6060";
 	}
 
-- 
1.9.1

[PATCH v3 03/15] net: dsa: Report known silicon revisions for Marvell 88E6131

[Guenter Roeck]

Report known silicon revisions when probing Marvell 88E6131 switches.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v3:
- No change
v2:
- No change

 drivers/net/dsa/mv88e6131.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/net/dsa/mv88e6131.c b/drivers/net/dsa/mv88e6131.c
index 244c735..1230f52 100644
--- a/drivers/net/dsa/mv88e6131.c
+++ b/drivers/net/dsa/mv88e6131.c
@@ -21,6 +21,7 @@
 #define ID_6085		0x04a0
 #define ID_6095		0x0950
 #define ID_6131		0x1060
+#define ID_6131_B2	0x1066
 
 static char *mv88e6131_probe(struct device *host_dev, int sw_addr)
 {
@@ -32,12 +33,15 @@ static char *mv88e6131_probe(struct device *host_dev, int sw_addr)
 
 	ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), 0x03);
 	if (ret >= 0) {
-		ret &= 0xfff0;
-		if (ret == ID_6085)
+		int ret_masked = ret & 0xfff0;
+
+		if (ret_masked == ID_6085)
 			return "Marvell 88E6085";
-		if (ret == ID_6095)
+		if (ret_masked == ID_6095)
 			return "Marvell 88E6095/88E6095F";
-		if (ret == ID_6131)
+		if (ret == ID_6131_B2)
+			return "Marvell 88E6131 (B2)";
+		if (ret_masked == ID_6131)
 			return "Marvell 88E6131";
 	}
 
-- 
1.9.1

[PATCH v3 04/15] net: dsa: Add support for Marvell 88E6352

[Guenter Roeck]

Marvell 88E6352 is mostly compatible to MV88E6123/61/65,
but requires indirect phy access. Also, its configuration
registers are a bit different.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v3:
- No change
v2:
- No change

 MAINTAINERS                 |   5 +
 drivers/net/dsa/Kconfig     |   8 +
 drivers/net/dsa/Makefile    |   3 +
 drivers/net/dsa/mv88e6352.c | 464 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/net/dsa/mv88e6xxx.c |   3 +
 drivers/net/dsa/mv88e6xxx.h |   7 +
 6 files changed, 490 insertions(+)
 create mode 100644 drivers/net/dsa/mv88e6352.c

diff --git a/MAINTAINERS b/MAINTAINERS
index dab92a7..91db18e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5860,6 +5860,11 @@ M:	Russell King <rmk+kernel@arm.linux.org.uk>
 S:	Maintained
 F:	drivers/gpu/drm/armada/
 
+MARVELL 88E6352 DSA support
+M:	Guenter Roeck <linux@roeck-us.net>
+S:	Maintained
+F:	drivers/net/dsa/mv88e6352.c
+
 MARVELL GIGABIT ETHERNET DRIVERS (skge/sky2)
 M:	Mirko Lindner <mlindner@marvell.com>
 M:	Stephen Hemminger <stephen@networkplumber.org>
diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
index 9234d80..0987c33 100644
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -45,6 +45,14 @@ config NET_DSA_MV88E6171
 	  This enables support for the Marvell 88E6171 ethernet switch
 	  chip.
 
+config NET_DSA_MV88E6352
+	tristate "Marvell 88E6352 ethernet switch chip support"
+	select NET_DSA
+	select NET_DSA_MV88E6XXX
+	select NET_DSA_TAG_EDSA
+	---help---
+	  This enables support for the Marvell 88E6352 ethernet switch chip.
+
 config NET_DSA_BCM_SF2
 	tristate "Broadcom Starfighter 2 Ethernet switch support"
 	depends on HAS_IOMEM
diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile
index 23a90de..e2d51c4 100644
--- a/drivers/net/dsa/Makefile
+++ b/drivers/net/dsa/Makefile
@@ -7,6 +7,9 @@ endif
 ifdef CONFIG_NET_DSA_MV88E6131
 mv88e6xxx_drv-y += mv88e6131.o
 endif
+ifdef CONFIG_NET_DSA_MV88E6352
+mv88e6xxx_drv-y += mv88e6352.o
+endif
 ifdef CONFIG_NET_DSA_MV88E6171
 mv88e6xxx_drv-y += mv88e6171.o
 endif
diff --git a/drivers/net/dsa/mv88e6352.c b/drivers/net/dsa/mv88e6352.c
new file mode 100644
index 0000000..43a5826
--- /dev/null
+++ b/drivers/net/dsa/mv88e6352.c
@@ -0,0 +1,464 @@
+/*
+ * net/dsa/mv88e6352.c - Marvell 88e6352 switch chip support
+ *
+ * Copyright (c) 2014 Guenter Roeck
+ *
+ * Derived from mv88e6123_61_65.c
+ * Copyright (c) 2008-2009 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/platform_device.h>
+#include <linux/phy.h>
+#include <net/dsa.h>
+#include "mv88e6xxx.h"
+
+static int mv88e6352_phy_wait(struct dsa_switch *ds)
+{
+	unsigned long timeout = jiffies + HZ / 10;
+
+	while (time_before(jiffies, timeout)) {
+		int ret;
+
+		ret = REG_READ(REG_GLOBAL2, 0x18);
+		if (ret < 0)
+			return ret;
+
+		if (!(ret & 0x8000))
+			return 0;
+
+		usleep_range(1000, 2000);
+	}
+	return -ETIMEDOUT;
+}
+
+static int __mv88e6352_phy_read(struct dsa_switch *ds, int addr, int regnum)
+{
+	int ret;
+
+	REG_WRITE(REG_GLOBAL2, 0x18, 0x9800 | (addr << 5) | regnum);
+
+	ret = mv88e6352_phy_wait(ds);
+	if (ret < 0)
+		return ret;
+
+	return REG_READ(REG_GLOBAL2, 0x19);
+}
+
+static int __mv88e6352_phy_write(struct dsa_switch *ds, int addr, int regnum,
+				 u16 val)
+{
+	REG_WRITE(REG_GLOBAL2, 0x19, val);
+	REG_WRITE(REG_GLOBAL2, 0x18, 0x9400 | (addr << 5) | regnum);
+
+	return mv88e6352_phy_wait(ds);
+}
+
+static char *mv88e6352_probe(struct device *host_dev, int sw_addr)
+{
+	struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
+	int ret;
+
+	if (bus == NULL)
+		return NULL;
+
+	ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), 0x03);
+	if (ret >= 0) {
+		if (ret == 0x3521)
+			return "Marvell 88E6352 (A0)";
+		if (ret == 0x3522)
+			return "Marvell 88E6352 (A1)";
+		if ((ret & 0xfff0) == 0x3520)
+			return "Marvell 88E6352";
+	}
+
+	return NULL;
+}
+
+static int mv88e6352_switch_reset(struct dsa_switch *ds)
+{
+	unsigned long timeout;
+	int ret;
+	int i;
+
+	/* Set all ports to the disabled state. */
+	for (i = 0; i < 7; i++) {
+		ret = REG_READ(REG_PORT(i), 0x04);
+		REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
+	}
+
+	/* Wait for transmit queues to drain. */
+	usleep_range(2000, 4000);
+
+	/* Reset the switch. Keep PPU active (bit 14, undocumented).
+	 * The PPU needs to be active to support indirect phy register
+	 * accesses through global registers 0x18 and 0x19.
+	 */
+	REG_WRITE(REG_GLOBAL, 0x04, 0xc000);
+
+	/* Wait up to one second for reset to complete. */
+	timeout = jiffies + 1 * HZ;
+	while (time_before(jiffies, timeout)) {
+		ret = REG_READ(REG_GLOBAL, 0x00);
+		if ((ret & 0x8800) == 0x8800)
+			break;
+		usleep_range(1000, 2000);
+	}
+	if (time_after(jiffies, timeout))
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static int mv88e6352_setup_global(struct dsa_switch *ds)
+{
+	int ret;
+	int i;
+
+	/* Discard packets with excessive collisions,
+	 * mask all interrupt sources, enable PPU (bit 14, undocumented).
+	 */
+	REG_WRITE(REG_GLOBAL, 0x04, 0x6000);
+
+	/* Set the default address aging time to 5 minutes, and
+	 * enable address learn messages to be sent to all message
+	 * ports.
+	 */
+	REG_WRITE(REG_GLOBAL, 0x0a, 0x0148);
+
+	/* Configure the priority mapping registers. */
+	ret = mv88e6xxx_config_prio(ds);
+	if (ret < 0)
+		return ret;
+
+	/* Configure the upstream port, and configure the upstream
+	 * port as the port to which ingress and egress monitor frames
+	 * are to be sent.
+	 */
+	REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1110));
+
+	/* Disable remote management for now, and set the switch's
+	 * DSA device number.
+	 */
+	REG_WRITE(REG_GLOBAL, 0x1c, ds->index & 0x1f);
+
+	/* Send all frames with destination addresses matching
+	 * 01:80:c2:00:00:2x to the CPU port.
+	 */
+	REG_WRITE(REG_GLOBAL2, 0x02, 0xffff);
+
+	/* Send all frames with destination addresses matching
+	 * 01:80:c2:00:00:0x to the CPU port.
+	 */
+	REG_WRITE(REG_GLOBAL2, 0x03, 0xffff);
+
+	/* Disable the loopback filter, disable flow control
+	 * messages, disable flood broadcast override, disable
+	 * removing of provider tags, disable ATU age violation
+	 * interrupts, disable tag flow control, force flow
+	 * control priority to the highest, and send all special
+	 * multicast frames to the CPU at the highest priority.
+	 */
+	REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff);
+
+	/* Program the DSA routing table. */
+	for (i = 0; i < 32; i++) {
+		int nexthop = 0x1f;
+
+		if (i != ds->index && i < ds->dst->pd->nr_chips)
+			nexthop = ds->pd->rtable[i] & 0x1f;
+
+		REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | nexthop);
+	}
+
+	/* Clear all trunk masks. */
+	for (i = 0; i < 8; i++)
+		REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0x7f);
+
+	/* Clear all trunk mappings. */
+	for (i = 0; i < 16; i++)
+		REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11));
+
+	/* Disable ingress rate limiting by resetting all ingress
+	 * rate limit registers to their initial state.
+	 */
+	for (i = 0; i < 7; i++)
+		REG_WRITE(REG_GLOBAL2, 0x09, 0x9000 | (i << 8));
+
+	/* Initialise cross-chip port VLAN table to reset defaults. */
+	REG_WRITE(REG_GLOBAL2, 0x0b, 0x9000);
+
+	/* Clear the priority override table. */
+	for (i = 0; i < 16; i++)
+		REG_WRITE(REG_GLOBAL2, 0x0f, 0x8000 | (i << 8));
+
+	/* @@@ initialise AVB (22/23) watchdog (27) sdet (29) registers */
+
+	return 0;
+}
+
+static int mv88e6352_setup_port(struct dsa_switch *ds, int p)
+{
+	int addr = REG_PORT(p);
+	u16 val;
+
+	/* MAC Forcing register: don't force link, speed, duplex
+	 * or flow control state to any particular values on physical
+	 * ports, but force the CPU port and all DSA ports to 1000 Mb/s
+	 * full duplex.
+	 */
+	if (dsa_is_cpu_port(ds, p) || ds->dsa_port_mask & (1 << p))
+		REG_WRITE(addr, 0x01, 0x003e);
+	else
+		REG_WRITE(addr, 0x01, 0x0003);
+
+	/* Do not limit the period of time that this port can be
+	 * paused for by the remote end or the period of time that
+	 * this port can pause the remote end.
+	 */
+	REG_WRITE(addr, 0x02, 0x0000);
+
+	/* Port Control: disable Drop-on-Unlock, disable Drop-on-Lock,
+	 * disable Header mode, enable IGMP/MLD snooping, disable VLAN
+	 * tunneling, determine priority by looking at 802.1p and IP
+	 * priority fields (IP prio has precedence), and set STP state
+	 * to Forwarding.
+	 *
+	 * If this is the CPU link, use DSA or EDSA tagging depending
+	 * on which tagging mode was configured.
+	 *
+	 * If this is a link to another switch, use DSA tagging mode.
+	 *
+	 * If this is the upstream port for this switch, enable
+	 * forwarding of unknown unicasts and multicasts.
+	 */
+	val = 0x0433;
+	if (dsa_is_cpu_port(ds, p)) {
+		if (ds->dst->tag_protocol == DSA_TAG_PROTO_EDSA)
+			val |= 0x3300;
+		else
+			val |= 0x0100;
+	}
+	if (ds->dsa_port_mask & (1 << p))
+		val |= 0x0100;
+	if (p == dsa_upstream_port(ds))
+		val |= 0x000c;
+	REG_WRITE(addr, 0x04, val);
+
+	/* Port Control 1: disable trunking.  Also, if this is the
+	 * CPU port, enable learn messages to be sent to this port.
+	 */
+	REG_WRITE(addr, 0x05, dsa_is_cpu_port(ds, p) ? 0x8000 : 0x0000);
+
+	/* Port based VLAN map: give each port its own address
+	 * database, allow the CPU port to talk to each of the 'real'
+	 * ports, and allow each of the 'real' ports to only talk to
+	 * the upstream port.
+	 */
+	val = (p & 0xf) << 12;
+	if (dsa_is_cpu_port(ds, p))
+		val |= ds->phys_port_mask;
+	else
+		val |= 1 << dsa_upstream_port(ds);
+	REG_WRITE(addr, 0x06, val);
+
+	/* Default VLAN ID and priority: don't set a default VLAN
+	 * ID, and set the default packet priority to zero.
+	 */
+	REG_WRITE(addr, 0x07, 0x0000);
+
+	/* Port Control 2: don't force a good FCS, set the maximum
+	 * frame size to 10240 bytes, don't let the switch add or
+	 * strip 802.1q tags, don't discard tagged or untagged frames
+	 * on this port, do a destination address lookup on all
+	 * received packets as usual, disable ARP mirroring and don't
+	 * send a copy of all transmitted/received frames on this port
+	 * to the CPU.
+	 */
+	REG_WRITE(addr, 0x08, 0x2080);
+
+	/* Egress rate control: disable egress rate control. */
+	REG_WRITE(addr, 0x09, 0x0001);
+
+	/* Egress rate control 2: disable egress rate control. */
+	REG_WRITE(addr, 0x0a, 0x0000);
+
+	/* Port Association Vector: when learning source addresses
+	 * of packets, add the address to the address database using
+	 * a port bitmap that has only the bit for this port set and
+	 * the other bits clear.
+	 */
+	REG_WRITE(addr, 0x0b, 1 << p);
+
+	/* Port ATU control: disable limiting the number of address
+	 * database entries that this port is allowed to use.
+	 */
+	REG_WRITE(addr, 0x0c, 0x0000);
+
+	/* Priority Override: disable DA, SA and VTU priority override. */
+	REG_WRITE(addr, 0x0d, 0x0000);
+
+	/* Port Ethertype: use the Ethertype DSA Ethertype value. */
+	REG_WRITE(addr, 0x0f, ETH_P_EDSA);
+
+	/* Tag Remap: use an identity 802.1p prio -> switch prio
+	 * mapping.
+	 */
+	REG_WRITE(addr, 0x18, 0x3210);
+
+	/* Tag Remap 2: use an identity 802.1p prio -> switch prio
+	 * mapping.
+	 */
+	REG_WRITE(addr, 0x19, 0x7654);
+
+	return 0;
+}
+
+static int mv88e6352_setup(struct dsa_switch *ds)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int ret;
+	int i;
+
+	mutex_init(&ps->smi_mutex);
+	mutex_init(&ps->stats_mutex);
+	mutex_init(&ps->phy_mutex);
+
+	ps->id = REG_READ(REG_PORT(0), 0x03) & 0xfff0;
+
+	ret = mv88e6352_switch_reset(ds);
+	if (ret < 0)
+		return ret;
+
+	/* @@@ initialise vtu and atu */
+
+	ret = mv88e6352_setup_global(ds);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < 7; i++) {
+		ret = mv88e6352_setup_port(ds, i);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int mv88e6352_port_to_phy_addr(int port)
+{
+	if (port >= 0 && port <= 4)
+		return port;
+	return -EINVAL;
+}
+
+static int
+mv88e6352_phy_read(struct dsa_switch *ds, int port, int regnum)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int addr = mv88e6352_port_to_phy_addr(port);
+	int ret;
+
+	if (addr < 0)
+		return addr;
+
+	mutex_lock(&ps->phy_mutex);
+	ret = __mv88e6352_phy_read(ds, addr, regnum);
+	mutex_unlock(&ps->phy_mutex);
+
+	return ret;
+}
+
+static int
+mv88e6352_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int addr = mv88e6352_port_to_phy_addr(port);
+	int ret;
+
+	if (addr < 0)
+		return addr;
+
+	mutex_lock(&ps->phy_mutex);
+	ret = __mv88e6352_phy_write(ds, addr, regnum, val);
+	mutex_unlock(&ps->phy_mutex);
+
+	return ret;
+}
+
+static struct mv88e6xxx_hw_stat mv88e6352_hw_stats[] = {
+	{ "in_good_octets", 8, 0x00, },
+	{ "in_bad_octets", 4, 0x02, },
+	{ "in_unicast", 4, 0x04, },
+	{ "in_broadcasts", 4, 0x06, },
+	{ "in_multicasts", 4, 0x07, },
+	{ "in_pause", 4, 0x16, },
+	{ "in_undersize", 4, 0x18, },
+	{ "in_fragments", 4, 0x19, },
+	{ "in_oversize", 4, 0x1a, },
+	{ "in_jabber", 4, 0x1b, },
+	{ "in_rx_error", 4, 0x1c, },
+	{ "in_fcs_error", 4, 0x1d, },
+	{ "out_octets", 8, 0x0e, },
+	{ "out_unicast", 4, 0x10, },
+	{ "out_broadcasts", 4, 0x13, },
+	{ "out_multicasts", 4, 0x12, },
+	{ "out_pause", 4, 0x15, },
+	{ "excessive", 4, 0x11, },
+	{ "collisions", 4, 0x1e, },
+	{ "deferred", 4, 0x05, },
+	{ "single", 4, 0x14, },
+	{ "multiple", 4, 0x17, },
+	{ "out_fcs_error", 4, 0x03, },
+	{ "late", 4, 0x1f, },
+	{ "hist_64bytes", 4, 0x08, },
+	{ "hist_65_127bytes", 4, 0x09, },
+	{ "hist_128_255bytes", 4, 0x0a, },
+	{ "hist_256_511bytes", 4, 0x0b, },
+	{ "hist_512_1023bytes", 4, 0x0c, },
+	{ "hist_1024_max_bytes", 4, 0x0d, },
+};
+
+static void
+mv88e6352_get_strings(struct dsa_switch *ds, int port, uint8_t *data)
+{
+	mv88e6xxx_get_strings(ds, ARRAY_SIZE(mv88e6352_hw_stats),
+			      mv88e6352_hw_stats, port, data);
+}
+
+static void
+mv88e6352_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data)
+{
+	mv88e6xxx_get_ethtool_stats(ds, ARRAY_SIZE(mv88e6352_hw_stats),
+				    mv88e6352_hw_stats, port, data);
+}
+
+static int mv88e6352_get_sset_count(struct dsa_switch *ds)
+{
+	return ARRAY_SIZE(mv88e6352_hw_stats);
+}
+
+struct dsa_switch_driver mv88e6352_switch_driver = {
+	.tag_protocol		= DSA_TAG_PROTO_EDSA,
+	.priv_size		= sizeof(struct mv88e6xxx_priv_state),
+	.probe			= mv88e6352_probe,
+	.setup			= mv88e6352_setup,
+	.set_addr		= mv88e6xxx_set_addr_indirect,
+	.phy_read		= mv88e6352_phy_read,
+	.phy_write		= mv88e6352_phy_write,
+	.poll_link		= mv88e6xxx_poll_link,
+	.get_strings		= mv88e6352_get_strings,
+	.get_ethtool_stats	= mv88e6352_get_ethtool_stats,
+	.get_sset_count		= mv88e6352_get_sset_count,
+};
+
+MODULE_ALIAS("platform:mv88e6352");
diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c
index a6c90cf..8e1090b 100644
--- a/drivers/net/dsa/mv88e6xxx.c
+++ b/drivers/net/dsa/mv88e6xxx.c
@@ -507,6 +507,9 @@ static int __init mv88e6xxx_init(void)
 #if IS_ENABLED(CONFIG_NET_DSA_MV88E6123_61_65)
 	register_switch_driver(&mv88e6123_61_65_switch_driver);
 #endif
+#if IS_ENABLED(CONFIG_NET_DSA_MV88E6352)
+	register_switch_driver(&mv88e6352_switch_driver);
+#endif
 #if IS_ENABLED(CONFIG_NET_DSA_MV88E6171)
 	register_switch_driver(&mv88e6171_switch_driver);
 #endif
diff --git a/drivers/net/dsa/mv88e6xxx.h b/drivers/net/dsa/mv88e6xxx.h
index 5e5145a..c0ce133 100644
--- a/drivers/net/dsa/mv88e6xxx.h
+++ b/drivers/net/dsa/mv88e6xxx.h
@@ -37,6 +37,12 @@ struct mv88e6xxx_priv_state {
 	 */
 	struct mutex	stats_mutex;
 
+	/* This mutex serializes phy access for chips with
+	 * indirect phy addressing. It is unused for chips
+	 * with direct phy access.
+	 */
+	struct mutex	phy_mutex;
+
 	int		id; /* switch product id */
 };
 
@@ -70,6 +76,7 @@ void mv88e6xxx_get_ethtool_stats(struct dsa_switch *ds,
 
 extern struct dsa_switch_driver mv88e6131_switch_driver;
 extern struct dsa_switch_driver mv88e6123_61_65_switch_driver;
+extern struct dsa_switch_driver mv88e6352_switch_driver;
 extern struct dsa_switch_driver mv88e6171_switch_driver;
 
 #define REG_READ(addr, reg)						\
-- 
1.9.1

[PATCH v3 05/15] net: dsa/mv88e6352: Add support for MV88E6176

[Guenter Roeck]

MV88E6176 is mostly compatible to MV88E6352 and is documented
in the same functional specification. Add support for it.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v3:
- No change
v2:
- No change

 drivers/net/dsa/Kconfig     | 5 +++--
 drivers/net/dsa/mv88e6352.c | 2 ++
 2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
index 0987c33..2d1a55e 100644
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -46,12 +46,13 @@ config NET_DSA_MV88E6171
 	  chip.
 
 config NET_DSA_MV88E6352
-	tristate "Marvell 88E6352 ethernet switch chip support"
+	tristate "Marvell 88E6176/88E6352 ethernet switch chip support"
 	select NET_DSA
 	select NET_DSA_MV88E6XXX
 	select NET_DSA_TAG_EDSA
 	---help---
-	  This enables support for the Marvell 88E6352 ethernet switch chip.
+	  This enables support for the Marvell 88E6176 and 88E6352 ethernet
+	  switch chips.
 
 config NET_DSA_BCM_SF2
 	tristate "Broadcom Starfighter 2 Ethernet switch support"
diff --git a/drivers/net/dsa/mv88e6352.c b/drivers/net/dsa/mv88e6352.c
index 43a5826..f17364f 100644
--- a/drivers/net/dsa/mv88e6352.c
+++ b/drivers/net/dsa/mv88e6352.c
@@ -73,6 +73,8 @@ static char *mv88e6352_probe(struct device *host_dev, int sw_addr)
 
 	ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), 0x03);
 	if (ret >= 0) {
+		if ((ret & 0xfff0) == 0x1760)
+			return "Marvell 88E6176";
 		if (ret == 0x3521)
 			return "Marvell 88E6352 (A0)";
 		if (ret == 0x3522)
-- 
1.9.1

[PATCH v3 06/15] net: dsa: Add support for reporting switch chip temperatures

[Guenter Roeck]

Some switches provide chip temperature data.
Add support for reporting it through the hwmon subsystem.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v3:
- No change
v2:
- Updated headline to reflect what is reported, not how.
- Make added functionality optional with new Kconfig flag
- Register with hwmon subsystem as virtual device (no parent)
- Generate hwmon 'name' attribute from sanitized master network device
  name plus _dsaX, where X is the DSA switch index and 'sanitized'
  means to pick all characters and digits from the network device name
- Do not use devm_ function to register hwmon device, since the hwmon
  device is not associated with a device and thus can not be auto-removed.

 include/net/dsa.h |  16 +++++++
 net/dsa/Kconfig   |  11 +++++
 net/dsa/dsa.c     | 131 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 158 insertions(+)

diff --git a/include/net/dsa.h b/include/net/dsa.h
index b765592..55e75e7 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -139,6 +139,14 @@ struct dsa_switch {
 	 */
 	struct device		*master_dev;
 
+#ifdef CONFIG_NET_DSA_HWMON
+	/*
+	 * Hardware monitoring information
+	 */
+	char			hwmon_name[IFNAMSIZ + 8];
+	struct device		*hwmon_dev;
+#endif
+
 	/*
 	 * Slave mii_bus and devices for the individual ports.
 	 */
@@ -242,6 +250,14 @@ struct dsa_switch_driver {
 			   struct ethtool_eee *e);
 	int	(*get_eee)(struct dsa_switch *ds, int port,
 			   struct ethtool_eee *e);
+
+#ifdef CONFIG_NET_DSA_HWMON
+	/* Hardware monitoring */
+	int	(*get_temp)(struct dsa_switch *ds, int *temp);
+	int	(*get_temp_limit)(struct dsa_switch *ds, int *temp);
+	int	(*set_temp_limit)(struct dsa_switch *ds, int temp);
+	int	(*get_temp_alarm)(struct dsa_switch *ds, bool *alarm);
+#endif
 };
 
 void register_switch_driver(struct dsa_switch_driver *type);
diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
index a585fd6..5f8ac40 100644
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -11,6 +11,17 @@ config NET_DSA
 
 if NET_DSA
 
+config NET_DSA_HWMON
+	bool "Distributed Switch Architecture HWMON support"
+	default y
+	depends on HWMON && !(NET_DSA=y && HWMON=m)
+	---help---
+	  Say Y if you want to expose thermal sensor data on switches supported
+	  by the Distributed Switch Architecture.
+
+	  Some of those switches contain thermal sensors. This data is available
+	  via the hwmon sysfs interface and exposes the onboard sensors.
+
 # tagging formats
 config NET_DSA_TAG_BRCM
 	bool
diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c
index 22f34cf..5edbbca 100644
--- a/net/dsa/dsa.c
+++ b/net/dsa/dsa.c
@@ -9,6 +9,9 @@
  * (at your option) any later version.
  */
 
+#include <linux/ctype.h>
+#include <linux/device.h>
+#include <linux/hwmon.h>
 #include <linux/list.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
@@ -17,6 +20,7 @@
 #include <linux/of.h>
 #include <linux/of_mdio.h>
 #include <linux/of_platform.h>
+#include <linux/sysfs.h>
 #include "dsa_priv.h"
 
 char dsa_driver_version[] = "0.1";
@@ -71,6 +75,104 @@ dsa_switch_probe(struct device *host_dev, int sw_addr, char **_name)
 	return ret;
 }
 
+/* hwmon support ************************************************************/
+
+#ifdef CONFIG_NET_DSA_HWMON
+
+static ssize_t temp1_input_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct dsa_switch *ds = dev_get_drvdata(dev);
+	int temp, ret;
+
+	ret = ds->drv->get_temp(ds, &temp);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%d\n", temp * 1000);
+}
+static DEVICE_ATTR_RO(temp1_input);
+
+static ssize_t temp1_max_show(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct dsa_switch *ds = dev_get_drvdata(dev);
+	int temp, ret;
+
+	ret = ds->drv->get_temp_limit(ds, &temp);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%d\n", temp * 1000);
+}
+
+static ssize_t temp1_max_store(struct device *dev,
+			       struct device_attribute *attr, const char *buf,
+			       size_t count)
+{
+	struct dsa_switch *ds = dev_get_drvdata(dev);
+	int temp, ret;
+
+	ret = kstrtoint(buf, 0, &temp);
+	if (ret < 0)
+		return ret;
+
+	ret = ds->drv->set_temp_limit(ds, DIV_ROUND_CLOSEST(temp, 1000));
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+static DEVICE_ATTR(temp1_max, S_IRUGO, temp1_max_show, temp1_max_store);
+
+static ssize_t temp1_max_alarm_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct dsa_switch *ds = dev_get_drvdata(dev);
+	bool alarm;
+	int ret;
+
+	ret = ds->drv->get_temp_alarm(ds, &alarm);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%d\n", alarm);
+}
+static DEVICE_ATTR_RO(temp1_max_alarm);
+
+static struct attribute *dsa_hwmon_attrs[] = {
+	&dev_attr_temp1_input.attr,	/* 0 */
+	&dev_attr_temp1_max.attr,	/* 1 */
+	&dev_attr_temp1_max_alarm.attr,	/* 2 */
+	NULL
+};
+
+static umode_t dsa_hwmon_attrs_visible(struct kobject *kobj,
+				       struct attribute *attr, int index)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct dsa_switch *ds = dev_get_drvdata(dev);
+	struct dsa_switch_driver *drv = ds->drv;
+	umode_t mode = attr->mode;
+
+	if (index == 1) {
+		if (!drv->get_temp_limit)
+			mode = 0;
+		else if (drv->set_temp_limit)
+			mode |= S_IWUSR;
+	} else if (index == 2 && !drv->get_temp_alarm) {
+		mode = 0;
+	}
+	return mode;
+}
+
+static const struct attribute_group dsa_hwmon_group = {
+	.attrs = dsa_hwmon_attrs,
+	.is_visible = dsa_hwmon_attrs_visible,
+};
+__ATTRIBUTE_GROUPS(dsa_hwmon);
+
+#endif /* CONFIG_NET_DSA_HWMON */
 
 /* basic switch operations **************************************************/
 static struct dsa_switch *
@@ -225,6 +327,31 @@ dsa_switch_setup(struct dsa_switch_tree *dst, int index,
 		ds->ports[i] = slave_dev;
 	}
 
+#ifdef CONFIG_NET_DSA_HWMON
+	/* If the switch provides a temperature sensor,
+	 * register with hardware monitoring subsystem.
+	 * Treat registration error as non-fatal and ignore it.
+	 */
+	if (drv->get_temp) {
+		const char *netname = netdev_name(dst->master_netdev);
+		char hname[IFNAMSIZ + 1];
+		int i, j;
+
+		/* Create valid hwmon 'name' attribute */
+		for (i = j = 0; i < IFNAMSIZ && netname[i]; i++) {
+			if (isalnum(netname[i]))
+				hname[j++] = netname[i];
+		}
+		hname[j] = '\0';
+		scnprintf(ds->hwmon_name, sizeof(ds->hwmon_name), "%s_dsa%d",
+			  hname, index);
+		ds->hwmon_dev = hwmon_device_register_with_groups(NULL,
+					ds->hwmon_name, ds, dsa_hwmon_groups);
+		if (IS_ERR(ds->hwmon_dev))
+			ds->hwmon_dev = NULL;
+	}
+#endif /* CONFIG_NET_DSA_HWMON */
+
 	return ds;
 
 out_free:
@@ -236,6 +363,10 @@ out:
 
 static void dsa_switch_destroy(struct dsa_switch *ds)
 {
+#ifdef CONFIG_NET_DSA_HWMON
+	if (ds->hwmon_dev)
+		hwmon_device_unregister(ds->hwmon_dev);
+#endif
 }
 
 #ifdef CONFIG_PM_SLEEP
-- 
1.9.1

[PATCH v3 07/15] net: dsa/mv88e6352: Report chip temperature

[Guenter Roeck]

MV88E6352 supports reading the chip temperature from two PHY registers,
6:26 and 6:27. Report it using the more accurate register 6:27.
Also report temperature limit and alarm.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v3:
- No change
v2:
- Make new functionality optional, depending on CONFIG_NET_DSA_HWMON

 drivers/net/dsa/mv88e6352.c | 101 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 101 insertions(+)

diff --git a/drivers/net/dsa/mv88e6352.c b/drivers/net/dsa/mv88e6352.c
index f17364f..744e6fa 100644
--- a/drivers/net/dsa/mv88e6352.c
+++ b/drivers/net/dsa/mv88e6352.c
@@ -325,6 +325,101 @@ static int mv88e6352_setup_port(struct dsa_switch *ds, int p)
 	return 0;
 }
 
+#ifdef CONFIG_NET_DSA_HWMON
+
+static int mv88e6352_phy_page_read(struct dsa_switch *ds,
+				   int port, int page, int reg)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int ret;
+
+	mutex_lock(&ps->phy_mutex);
+	ret = __mv88e6352_phy_write(ds, port, 0x16, page);
+	if (ret < 0)
+		goto error;
+	ret = __mv88e6352_phy_read(ds, port, reg);
+error:
+	__mv88e6352_phy_write(ds, port, 0x16, 0x0);
+	mutex_unlock(&ps->phy_mutex);
+	return ret;
+}
+
+static int mv88e6352_phy_page_write(struct dsa_switch *ds,
+				    int port, int page, int reg, int val)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int ret;
+
+	mutex_lock(&ps->phy_mutex);
+	ret = __mv88e6352_phy_write(ds, port, 0x16, page);
+	if (ret < 0)
+		goto error;
+
+	ret = __mv88e6352_phy_write(ds, port, reg, val);
+error:
+	__mv88e6352_phy_write(ds, port, 0x16, 0x0);
+	mutex_unlock(&ps->phy_mutex);
+	return ret;
+}
+
+static int mv88e6352_get_temp(struct dsa_switch *ds, int *temp)
+{
+	int ret;
+
+	*temp = 0;
+
+	ret = mv88e6352_phy_page_read(ds, 0, 6, 27);
+	if (ret < 0)
+		return ret;
+
+	*temp = (ret & 0xff) - 25;
+
+	return 0;
+}
+
+static int mv88e6352_get_temp_limit(struct dsa_switch *ds, int *temp)
+{
+	int ret;
+
+	*temp = 0;
+
+	ret = mv88e6352_phy_page_read(ds, 0, 6, 26);
+	if (ret < 0)
+		return ret;
+
+	*temp = (((ret >> 8) & 0x1f) * 5) - 25;
+
+	return 0;
+}
+
+static int mv88e6352_set_temp_limit(struct dsa_switch *ds, int temp)
+{
+	int ret;
+
+	ret = mv88e6352_phy_page_read(ds, 0, 6, 26);
+	if (ret < 0)
+		return ret;
+	temp = clamp_val(DIV_ROUND_CLOSEST(temp, 5) + 5, 0, 0x1f);
+	return mv88e6352_phy_page_write(ds, 0, 6, 26,
+					(ret & 0xe0ff) | (temp << 8));
+}
+
+static int mv88e6352_get_temp_alarm(struct dsa_switch *ds, bool *alarm)
+{
+	int ret;
+
+	*alarm = false;
+
+	ret = mv88e6352_phy_page_read(ds, 0, 6, 26);
+	if (ret < 0)
+		return ret;
+
+	*alarm = !!(ret & 0x40);
+
+	return 0;
+}
+#endif /* CONFIG_NET_DSA_HWMON */
+
 static int mv88e6352_setup(struct dsa_switch *ds)
 {
 	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
@@ -461,6 +556,12 @@ struct dsa_switch_driver mv88e6352_switch_driver = {
 	.get_strings		= mv88e6352_get_strings,
 	.get_ethtool_stats	= mv88e6352_get_ethtool_stats,
 	.get_sset_count		= mv88e6352_get_sset_count,
+#ifdef CONFIG_NET_DSA_HWMON
+	.get_temp		= mv88e6352_get_temp,
+	.get_temp_limit		= mv88e6352_get_temp_limit,
+	.set_temp_limit		= mv88e6352_set_temp_limit,
+	.get_temp_alarm		= mv88e6352_get_temp_alarm,
+#endif
 };
 
 MODULE_ALIAS("platform:mv88e6352");
-- 
1.9.1

[PATCH v3 08/15] net: dsa/mv88e6123_61_65: Report chip temperature

[Guenter Roeck]

MV88E6123 and compatible chips support reading the chip temperature
from PHY register 6:26.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v3:
- No change
v2:
- Make new functionality optional, depending on CONFIG_NET_DSA_HWMON

 drivers/net/dsa/mv88e6123_61_65.c | 68 +++++++++++++++++++++++++++++++++++++--
 1 file changed, 66 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/mv88e6123_61_65.c b/drivers/net/dsa/mv88e6123_61_65.c
index a332c53..9f43c9b 100644
--- a/drivers/net/dsa/mv88e6123_61_65.c
+++ b/drivers/net/dsa/mv88e6123_61_65.c
@@ -291,6 +291,54 @@ static int mv88e6123_61_65_setup_port(struct dsa_switch *ds, int p)
 	return 0;
 }
 
+#ifdef CONFIG_NET_DSA_HWMON
+
+static int  mv88e6123_61_65_get_temp(struct dsa_switch *ds, int *temp)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int ret;
+	int val;
+
+	*temp = 0;
+
+	mutex_lock(&ps->phy_mutex);
+
+	ret = mv88e6xxx_phy_write(ds, 0x0, 0x16, 0x6);
+	if (ret < 0)
+		goto error;
+
+	/* Enable temperature sensor */
+	ret = mv88e6xxx_phy_read(ds, 0x0, 0x1a);
+	if (ret < 0)
+		goto error;
+
+	ret = mv88e6xxx_phy_write(ds, 0x0, 0x1a, ret | (1 << 5));
+	if (ret < 0)
+		goto error;
+
+	/* Wait for temperature to stabilize */
+	usleep_range(10000, 12000);
+
+	val = mv88e6xxx_phy_read(ds, 0x0, 0x1a);
+	if (val < 0) {
+		ret = val;
+		goto error;
+	}
+
+	/* Disable temperature sensor */
+	ret = mv88e6xxx_phy_write(ds, 0x0, 0x1a, ret & ~(1 << 5));
+	if (ret < 0)
+		goto error;
+
+	*temp = ((val & 0x1f) - 5) * 5;
+
+error:
+	mv88e6xxx_phy_write(ds, 0x0, 0x16, 0x0);
+	mutex_unlock(&ps->phy_mutex);
+	return ret;
+}
+#endif /* CONFIG_NET_DSA_HWMON */
+
 static int mv88e6123_61_65_setup(struct dsa_switch *ds)
 {
 	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
@@ -299,6 +347,7 @@ static int mv88e6123_61_65_setup(struct dsa_switch *ds)
 
 	mutex_init(&ps->smi_mutex);
 	mutex_init(&ps->stats_mutex);
+	mutex_init(&ps->phy_mutex);
 
 	ret = mv88e6123_61_65_switch_reset(ds);
 	if (ret < 0)
@@ -329,16 +378,28 @@ static int mv88e6123_61_65_port_to_phy_addr(int port)
 static int
 mv88e6123_61_65_phy_read(struct dsa_switch *ds, int port, int regnum)
 {
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
 	int addr = mv88e6123_61_65_port_to_phy_addr(port);
-	return mv88e6xxx_phy_read(ds, addr, regnum);
+	int ret;
+
+	mutex_lock(&ps->phy_mutex);
+	ret = mv88e6xxx_phy_read(ds, addr, regnum);
+	mutex_unlock(&ps->phy_mutex);
+	return ret;
 }
 
 static int
 mv88e6123_61_65_phy_write(struct dsa_switch *ds,
 			      int port, int regnum, u16 val)
 {
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
 	int addr = mv88e6123_61_65_port_to_phy_addr(port);
-	return mv88e6xxx_phy_write(ds, addr, regnum, val);
+	int ret;
+
+	mutex_lock(&ps->phy_mutex);
+	ret = mv88e6xxx_phy_write(ds, addr, regnum, val);
+	mutex_unlock(&ps->phy_mutex);
+	return ret;
 }
 
 static struct mv88e6xxx_hw_stat mv88e6123_61_65_hw_stats[] = {
@@ -406,6 +467,9 @@ struct dsa_switch_driver mv88e6123_61_65_switch_driver = {
 	.get_strings		= mv88e6123_61_65_get_strings,
 	.get_ethtool_stats	= mv88e6123_61_65_get_ethtool_stats,
 	.get_sset_count		= mv88e6123_61_65_get_sset_count,
+#ifdef CONFIG_NET_DSA_HWMON
+	.get_temp		= mv88e6123_61_65_get_temp,
+#endif
 };
 
 MODULE_ALIAS("platform:mv88e6123");
-- 
1.9.1

[PATCH v3 09/15] net: dsa: Add support for switch EEPROM access

[Guenter Roeck]

On some chips it is possible to access the switch eeprom.
Add infrastructure support for it.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v3:
- Fix bug seen if devicetree is enabled; eeprom-length property is
  attached to switch devicetree node, not to dsa node.
v2:
- Add support for configuring switch EEPROM size through platform data
  or devicetree data
- Do not compare new pointers against NULL
- Check if get_eeprom pointer is set before calling it

 include/net/dsa.h | 10 ++++++++++
 net/dsa/dsa.c     |  4 ++++
 net/dsa/slave.c   | 41 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 55 insertions(+)

diff --git a/include/net/dsa.h b/include/net/dsa.h
index 55e75e7..37856a2 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -38,6 +38,9 @@ struct dsa_chip_data {
 	struct device	*host_dev;
 	int		sw_addr;
 
+	/* set to size of eeprom if supported by the switch */
+	int		eeprom_len;
+
 	/* Device tree node pointer for this specific switch chip
 	 * used during switch setup in case additional properties
 	 * and resources needs to be used
@@ -258,6 +261,13 @@ struct dsa_switch_driver {
 	int	(*set_temp_limit)(struct dsa_switch *ds, int temp);
 	int	(*get_temp_alarm)(struct dsa_switch *ds, bool *alarm);
 #endif
+
+	/* EEPROM access */
+	int	(*get_eeprom_len)(struct dsa_switch *ds);
+	int	(*get_eeprom)(struct dsa_switch *ds,
+			      struct ethtool_eeprom *eeprom, u8 *data);
+	int	(*set_eeprom)(struct dsa_switch *ds,
+			      struct ethtool_eeprom *eeprom, u8 *data);
 };
 
 void register_switch_driver(struct dsa_switch_driver *type);
diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c
index 5edbbca..b51ef592 100644
--- a/net/dsa/dsa.c
+++ b/net/dsa/dsa.c
@@ -575,6 +575,7 @@ static int dsa_of_probe(struct platform_device *pdev)
 	const char *port_name;
 	int chip_index, port_index;
 	const unsigned int *sw_addr, *port_reg;
+	u32 eeprom_len;
 	int ret;
 
 	mdio = of_parse_phandle(np, "dsa,mii-bus", 0);
@@ -626,6 +627,9 @@ static int dsa_of_probe(struct platform_device *pdev)
 		if (cd->sw_addr > PHY_MAX_ADDR)
 			continue;
 
+		if (!of_property_read_u32(np, "eeprom-length", &eeprom_len))
+			cd->eeprom_len = eeprom_len;
+
 		for_each_available_child_of_node(child, port) {
 			port_reg = of_get_property(port, "reg", NULL);
 			if (!port_reg)
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 6d18174..ff2fbe7 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -271,6 +271,44 @@ static u32 dsa_slave_get_link(struct net_device *dev)
 	return -EOPNOTSUPP;
 }
 
+static int dsa_slave_get_eeprom_len(struct net_device *dev)
+{
+	struct dsa_slave_priv *p = netdev_priv(dev);
+	struct dsa_switch *ds = p->parent;
+
+	if (ds->pd->eeprom_len)
+		return ds->pd->eeprom_len;
+
+	if (ds->drv->get_eeprom_len)
+		return ds->drv->get_eeprom_len(ds);
+
+	return 0;
+}
+
+static int dsa_slave_get_eeprom(struct net_device *dev,
+				struct ethtool_eeprom *eeprom, u8 *data)
+{
+	struct dsa_slave_priv *p = netdev_priv(dev);
+	struct dsa_switch *ds = p->parent;
+
+	if (ds->drv->get_eeprom)
+		return ds->drv->get_eeprom(ds, eeprom, data);
+
+	return -EOPNOTSUPP;
+}
+
+static int dsa_slave_set_eeprom(struct net_device *dev,
+				struct ethtool_eeprom *eeprom, u8 *data)
+{
+	struct dsa_slave_priv *p = netdev_priv(dev);
+	struct dsa_switch *ds = p->parent;
+
+	if (ds->drv->set_eeprom)
+		return ds->drv->set_eeprom(ds, eeprom, data);
+
+	return -EOPNOTSUPP;
+}
+
 static void dsa_slave_get_strings(struct net_device *dev,
 				  uint32_t stringset, uint8_t *data)
 {
@@ -387,6 +425,9 @@ static const struct ethtool_ops dsa_slave_ethtool_ops = {
 	.get_drvinfo		= dsa_slave_get_drvinfo,
 	.nway_reset		= dsa_slave_nway_reset,
 	.get_link		= dsa_slave_get_link,
+	.get_eeprom_len		= dsa_slave_get_eeprom_len,
+	.get_eeprom		= dsa_slave_get_eeprom,
+	.set_eeprom		= dsa_slave_set_eeprom,
 	.get_strings		= dsa_slave_get_strings,
 	.get_ethtool_stats	= dsa_slave_get_ethtool_stats,
 	.get_sset_count		= dsa_slave_get_sset_count,
-- 
1.9.1

Re: [PATCH v3 09/15] net: dsa: Add support for switch EEPROM access

[Andrew Lunn]

> +static int dsa_slave_get_eeprom_len(struct net_device *dev)
> +{
> +	struct dsa_slave_priv *p = netdev_priv(dev);
> +	struct dsa_switch *ds = p->parent;
> +
> +	if (ds->pd->eeprom_len)
> +		return ds->pd->eeprom_len;
> +
> +	if (ds->drv->get_eeprom_len)
> +		return ds->drv->get_eeprom_len(ds);
> +
> +	return 0;
> +}
> +

Hi Guenter

I just started doing some testing with this patchset. A bit late since
David just accepted it, but...

root@dir665:~# ethtool -e lan4
Cannot get EEPROM data: Invalid argument
root@dir665:~# ethtool -e eth0
Cannot get EEPROM data: Operation not supported

There is no eeprom for the hardware i'm testing. Operation not
supported seems like a better error code and Invalid argument, and is
what other network drivers i tried returned.

      Andrew

Re: [PATCH v3 09/15] net: dsa: Add support for switch EEPROM access

[Guenter Roeck]

On Thu, Oct 30, 2014 at 10:11:31PM +0100, Andrew Lunn wrote:
> > +static int dsa_slave_get_eeprom_len(struct net_device *dev)
> > +{
> > +	struct dsa_slave_priv *p = netdev_priv(dev);
> > +	struct dsa_switch *ds = p->parent;
> > +
> > +	if (ds->pd->eeprom_len)
> > +		return ds->pd->eeprom_len;
> > +
> > +	if (ds->drv->get_eeprom_len)
> > +		return ds->drv->get_eeprom_len(ds);
> > +
> > +	return 0;
> > +}
> > +
> 
> Hi Guenter
> 
> I just started doing some testing with this patchset. A bit late since
> David just accepted it, but...
> 
> root@dir665:~# ethtool -e lan4
> Cannot get EEPROM data: Invalid argument
> root@dir665:~# ethtool -e eth0
> Cannot get EEPROM data: Operation not supported
> 
> There is no eeprom for the hardware i'm testing. Operation not
> supported seems like a better error code and Invalid argument, and is
> what other network drivers i tried returned.
> 
Hi Andrew,

I think the problem is that the infrastructure code (net/core/ethtool.c)
does not accept an error from the get_eeprom_len function, but instead
assumes that reporting eeprom data is supported if a driver provides
the access functions. The get_eeprom_len function returns 0 in your case,
which in ethtool_get_any_eeprom() translates to -EINVAL because user space
either requests no data or more data than available. I wonder why user
space requests anything in the first place; I would have assumed that it
reads the driver information first and is told that the eeprom length is 0,
but I guess that is a different question.

I quickly browsed through a couple of other drivers supporting get_eprom_len,
and they all return 0 if there is no eeprom. Doesn't that mean that they all
end up reporting -EINVAL if an attempt is made to read the eeprom ?

The only solution that comes to my mind would be to have the infrastructure
code check the return value from get_eeprom_len and return -EOPNOTSUPP
if the reported eeprom length is 0. That would be an infrastructure change,
though. Does that sound reasonable, or do you have a better idea ?

In parallel, I'll have a look into the ethtool command to see why it
requests eeprom data even though the reported eeprom length is 0.

Thanks,
Guenter

Re: [PATCH v3 09/15] net: dsa: Add support for switch EEPROM access

[Guenter Roeck]

On Thu, Oct 30, 2014 at 03:39:51PM -0700, Guenter Roeck wrote:
> On Thu, Oct 30, 2014 at 10:11:31PM +0100, Andrew Lunn wrote:
> > > +static int dsa_slave_get_eeprom_len(struct net_device *dev)
> > > +{
> > > +	struct dsa_slave_priv *p = netdev_priv(dev);
> > > +	struct dsa_switch *ds = p->parent;
> > > +
> > > +	if (ds->pd->eeprom_len)
> > > +		return ds->pd->eeprom_len;
> > > +
> > > +	if (ds->drv->get_eeprom_len)
> > > +		return ds->drv->get_eeprom_len(ds);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > 
> > Hi Guenter
> > 
> > I just started doing some testing with this patchset. A bit late since
> > David just accepted it, but...
> > 
> > root@dir665:~# ethtool -e lan4
> > Cannot get EEPROM data: Invalid argument
> > root@dir665:~# ethtool -e eth0
> > Cannot get EEPROM data: Operation not supported
> > 
> > There is no eeprom for the hardware i'm testing. Operation not
> > supported seems like a better error code and Invalid argument, and is
> > what other network drivers i tried returned.
> > 
> Hi Andrew,
> 
> I think the problem is that the infrastructure code (net/core/ethtool.c)
> does not accept an error from the get_eeprom_len function, but instead
> assumes that reporting eeprom data is supported if a driver provides
> the access functions. The get_eeprom_len function returns 0 in your case,
> which in ethtool_get_any_eeprom() translates to -EINVAL because user space
> either requests no data or more data than available. I wonder why user
> space requests anything in the first place; I would have assumed that it
> reads the driver information first and is told that the eeprom length is 0,
> but I guess that is a different question.
> 
> I quickly browsed through a couple of other drivers supporting get_eprom_len,
> and they all return 0 if there is no eeprom. Doesn't that mean that they all
> end up reporting -EINVAL if an attempt is made to read the eeprom ?
> 
> The only solution that comes to my mind would be to have the infrastructure
> code check the return value from get_eeprom_len and return -EOPNOTSUPP
> if the reported eeprom length is 0. That would be an infrastructure change,
> though. Does that sound reasonable, or do you have a better idea ?
> 
> In parallel, I'll have a look into the ethtool command to see why it
> requests eeprom data even though the reported eeprom length is 0.
> 
As suspected, ethtool will attempt to read a zero-length eeprom.

The following patch should solve the problem. Not sure if it is worth it,
though, since this will change behavior for existing drivers.

Thanks,
Guenter

---
From: Guenter Roeck <linux@roeck-us.net>
Date: Thu, 30 Oct 2014 17:51:34 -0700
Subject: [RFC PATCH] net: ethtool: Return -EOPNOTSUPP if user space tries to read
 EEPROM with lengh 0

If a driver supports reading EEPROM but no EEPROM is installed in the system,
the driver's get_eeprom_len function will return 0. ethtool will subsequently
try to read that zero-length EEPROM anyway. If the driver does not support
EEPROM access at all, this operation will return -EOPNOTSUPP. If the driver
does support EEPROM access but no EEPROM is installed, the operation will
return -EINVAL. Return -EOPNOTSUPP in both cases for consistency.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
 net/core/ethtool.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index 1600aa2..06dfb29 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -1036,7 +1036,8 @@ static int ethtool_get_eeprom(struct net_device *dev, void __user *useraddr)
 {
 	const struct ethtool_ops *ops = dev->ethtool_ops;
 
-	if (!ops->get_eeprom || !ops->get_eeprom_len)
+	if (!ops->get_eeprom || !ops->get_eeprom_len ||
+	    !ops->get_eeprom_len(dev))
 		return -EOPNOTSUPP;
 
 	return ethtool_get_any_eeprom(dev, useraddr, ops->get_eeprom,
@@ -1052,7 +1053,8 @@ static int ethtool_set_eeprom(struct net_device *dev, void __user *useraddr)
 	u8 *data;
 	int ret = 0;
 
-	if (!ops->set_eeprom || !ops->get_eeprom_len)
+	if (!ops->set_eeprom || !ops->get_eeprom_len ||
+	    !ops->get_eeprom_len(dev))
 		return -EOPNOTSUPP;
 
 	if (copy_from_user(&eeprom, useraddr, sizeof(eeprom)))
-- 
1.9.1

Re: [PATCH v3 09/15] net: dsa: Add support for switch EEPROM access

[Andrew Lunn]

> As suspected, ethtool will attempt to read a zero-length eeprom.
> 
> The following patch should solve the problem. Not sure if it is worth it,
> though, since this will change behavior for existing drivers.

Yes, it changes behaviour, but it does make it more consistent.

Probably it should be up to core network people to decide if this is
the write fix or leave it as is.

    Andrew

Re: [PATCH v3 09/15] net: dsa: Add support for switch EEPROM access

[Guenter Roeck]

On 10/30/2014 07:40 PM, Andrew Lunn wrote:
>> As suspected, ethtool will attempt to read a zero-length eeprom.
>>
>> The following patch should solve the problem. Not sure if it is worth it,
>> though, since this will change behavior for existing drivers.
>
> Yes, it changes behaviour, but it does make it more consistent.
>
> Probably it should be up to core network people to decide if this is
> the write fix or leave it as is.
>

s/write/right/.

The patch shows up in the netdev patchwork. David marked it as RFC,
so we'll see where it goes.

Thanks,
Guenter

Re: [PATCH v3 09/15] net: dsa: Add support for switch EEPROM access

[David Miller]

From: Guenter Roeck <linux@roeck-us.net>
Date: Thu, 30 Oct 2014 19:53:17 -0700

> On 10/30/2014 07:40 PM, Andrew Lunn wrote:
>>> As suspected, ethtool will attempt to read a zero-length eeprom.
>>>
>>> The following patch should solve the problem. Not sure if it is worth
>>> it,
>>> though, since this will change behavior for existing drivers.
>>
>> Yes, it changes behaviour, but it does make it more consistent.
>>
>> Probably it should be up to core network people to decide if this is
>> the write fix or leave it as is.
>>
> 
> s/write/right/.
> 
> The patch shows up in the netdev patchwork. David marked it as RFC,
> so we'll see where it goes.

As per your patch, I think we should fix this to not return a zero
length eeprom when the driver doesn't support it.

If dsa behaves outside of the defined behavior of what ethtool
implementations in ethernet drivers do, then it's ok to change it
because it's a bonafide bug fix in my eyes.

So if you submit this formally, I would apply it.

Thanks.

[PATCH v3 10/15] dsa: Add new optional devicetree property to describe EEPROM size

[Guenter Roeck]

The dsa core now supports reading from and writing to a switch EEPROM
if connected. Describe optional devicetree property indicating that
an EEPROM is present and its size.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v3:
- eeprom-length property is attached to switch devicetree node,
  not to dsa node.
v2:
- Added patch

 Documentation/devicetree/bindings/net/dsa/dsa.txt | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt
index a62c889..e124847 100644
--- a/Documentation/devicetree/bindings/net/dsa/dsa.txt
+++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt
@@ -10,7 +10,7 @@ Required properties:
 - dsa,ethernet		: Should be a phandle to a valid Ethernet device node
 - dsa,mii-bus		: Should be a phandle to a valid MDIO bus device node
 
-Optionnal properties:
+Optional properties:
 - interrupts		: property with a value describing the switch
 			  interrupt number (not supported by the driver)
 
@@ -23,6 +23,13 @@ Each of these switch child nodes should have the following required properties:
 - #address-cells	: Must be 1
 - #size-cells		: Must be 0
 
+A switch child node has the following optional property:
+
+- eeprom-length		: Set to the length of an EEPROM connected to the
+			  switch. Must be set if the switch can not detect
+			  the presence and/or size of a connected EEPROM,
+			  otherwise optional.
+
 A switch may have multiple "port" children nodes
 
 Each port children node must have the following mandatory properties:
-- 
1.9.1

[PATCH v3 11/15] net: dsa/mv88e6352: Implement EEPROM access functions

[Guenter Roeck]

MV88E6352 supports read and write access to its configuration eeprom.

There is no means to detect if an EEPROM is connected to the switch.
Also, the switch supports EEPROMs with different sizes, but can not detect
or report the type or size of connected EEPROMs. Therefore, do not implement
the get_eeprom_len callback but depend on platform or devicetree data to
provide information about EEPROM presence and size.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v3:
- No change
v2:
- EEPROM length must now be provided through platform or devicetree data

 drivers/net/dsa/mv88e6352.c | 222 +++++++++++++++++++++++++++++++++++++++++++-
 drivers/net/dsa/mv88e6xxx.h |   5 +
 2 files changed, 224 insertions(+), 3 deletions(-)

diff --git a/drivers/net/dsa/mv88e6352.c b/drivers/net/dsa/mv88e6352.c
index 744e6fa..8a956f9 100644
--- a/drivers/net/dsa/mv88e6352.c
+++ b/drivers/net/dsa/mv88e6352.c
@@ -22,18 +22,18 @@
 #include <net/dsa.h>
 #include "mv88e6xxx.h"
 
-static int mv88e6352_phy_wait(struct dsa_switch *ds)
+static int mv88e6352_wait(struct dsa_switch *ds, int reg, u16 mask)
 {
 	unsigned long timeout = jiffies + HZ / 10;
 
 	while (time_before(jiffies, timeout)) {
 		int ret;
 
-		ret = REG_READ(REG_GLOBAL2, 0x18);
+		ret = REG_READ(REG_GLOBAL2, reg);
 		if (ret < 0)
 			return ret;
 
-		if (!(ret & 0x8000))
+		if (!(ret & mask))
 			return 0;
 
 		usleep_range(1000, 2000);
@@ -41,6 +41,21 @@ static int mv88e6352_phy_wait(struct dsa_switch *ds)
 	return -ETIMEDOUT;
 }
 
+static inline int mv88e6352_phy_wait(struct dsa_switch *ds)
+{
+	return mv88e6352_wait(ds, 0x18, 0x8000);
+}
+
+static inline int mv88e6352_eeprom_load_wait(struct dsa_switch *ds)
+{
+	return mv88e6352_wait(ds, 0x14, 0x0800);
+}
+
+static inline int mv88e6352_eeprom_busy_wait(struct dsa_switch *ds)
+{
+	return mv88e6352_wait(ds, 0x14, 0x8000);
+}
+
 static int __mv88e6352_phy_read(struct dsa_switch *ds, int addr, int regnum)
 {
 	int ret;
@@ -429,6 +444,7 @@ static int mv88e6352_setup(struct dsa_switch *ds)
 	mutex_init(&ps->smi_mutex);
 	mutex_init(&ps->stats_mutex);
 	mutex_init(&ps->phy_mutex);
+	mutex_init(&ps->eeprom_mutex);
 
 	ps->id = REG_READ(REG_PORT(0), 0x03) & 0xfff0;
 
@@ -525,6 +541,204 @@ static struct mv88e6xxx_hw_stat mv88e6352_hw_stats[] = {
 	{ "hist_1024_max_bytes", 4, 0x0d, },
 };
 
+static int mv88e6352_read_eeprom_word(struct dsa_switch *ds, int addr)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int ret;
+
+	mutex_lock(&ps->eeprom_mutex);
+
+	ret = mv88e6xxx_reg_write(ds, REG_GLOBAL2, 0x14,
+				  0xc000 | (addr & 0xff));
+	if (ret < 0)
+		goto error;
+
+	ret = mv88e6352_eeprom_busy_wait(ds);
+	if (ret < 0)
+		goto error;
+
+	ret = mv88e6xxx_reg_read(ds, REG_GLOBAL2, 0x15);
+error:
+	mutex_unlock(&ps->eeprom_mutex);
+	return ret;
+}
+
+static int mv88e6352_get_eeprom(struct dsa_switch *ds,
+				struct ethtool_eeprom *eeprom, u8 *data)
+{
+	int offset;
+	int len;
+	int ret;
+
+	offset = eeprom->offset;
+	len = eeprom->len;
+	eeprom->len = 0;
+
+	eeprom->magic = 0xc3ec4951;
+
+	ret = mv88e6352_eeprom_load_wait(ds);
+	if (ret < 0)
+		return ret;
+
+	if (offset & 1) {
+		int word;
+
+		word = mv88e6352_read_eeprom_word(ds, offset >> 1);
+		if (word < 0)
+			return word;
+
+		*data++ = (word >> 8) & 0xff;
+
+		offset++;
+		len--;
+		eeprom->len++;
+	}
+
+	while (len >= 2) {
+		int word;
+
+		word = mv88e6352_read_eeprom_word(ds, offset >> 1);
+		if (word < 0)
+			return word;
+
+		*data++ = word & 0xff;
+		*data++ = (word >> 8) & 0xff;
+
+		offset += 2;
+		len -= 2;
+		eeprom->len += 2;
+	}
+
+	if (len) {
+		int word;
+
+		word = mv88e6352_read_eeprom_word(ds, offset >> 1);
+		if (word < 0)
+			return word;
+
+		*data++ = word & 0xff;
+
+		offset++;
+		len--;
+		eeprom->len++;
+	}
+
+	return 0;
+}
+
+static int mv88e6352_eeprom_is_readonly(struct dsa_switch *ds)
+{
+	int ret;
+
+	ret = mv88e6xxx_reg_read(ds, REG_GLOBAL2, 0x14);
+	if (ret < 0)
+		return ret;
+
+	if (!(ret & 0x0400))
+		return -EROFS;
+
+	return 0;
+}
+
+static int mv88e6352_write_eeprom_word(struct dsa_switch *ds, int addr,
+				       u16 data)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int ret;
+
+	mutex_lock(&ps->eeprom_mutex);
+
+	ret = mv88e6xxx_reg_write(ds, REG_GLOBAL2, 0x15, data);
+	if (ret < 0)
+		goto error;
+
+	ret = mv88e6xxx_reg_write(ds, REG_GLOBAL2, 0x14,
+				  0xb000 | (addr & 0xff));
+	if (ret < 0)
+		goto error;
+
+	ret = mv88e6352_eeprom_busy_wait(ds);
+error:
+	mutex_unlock(&ps->eeprom_mutex);
+	return ret;
+}
+
+static int mv88e6352_set_eeprom(struct dsa_switch *ds,
+				struct ethtool_eeprom *eeprom, u8 *data)
+{
+	int offset;
+	int ret;
+	int len;
+
+	if (eeprom->magic != 0xc3ec4951)
+		return -EINVAL;
+
+	ret = mv88e6352_eeprom_is_readonly(ds);
+	if (ret)
+		return ret;
+
+	offset = eeprom->offset;
+	len = eeprom->len;
+	eeprom->len = 0;
+
+	ret = mv88e6352_eeprom_load_wait(ds);
+	if (ret < 0)
+		return ret;
+
+	if (offset & 1) {
+		int word;
+
+		word = mv88e6352_read_eeprom_word(ds, offset >> 1);
+		if (word < 0)
+			return word;
+
+		word = (*data++ << 8) | (word & 0xff);
+
+		ret = mv88e6352_write_eeprom_word(ds, offset >> 1, word);
+		if (ret < 0)
+			return ret;
+
+		offset++;
+		len--;
+		eeprom->len++;
+	}
+
+	while (len >= 2) {
+		int word;
+
+		word = *data++;
+		word |= *data++ << 8;
+
+		ret = mv88e6352_write_eeprom_word(ds, offset >> 1, word);
+		if (ret < 0)
+			return ret;
+
+		offset += 2;
+		len -= 2;
+		eeprom->len += 2;
+	}
+
+	if (len) {
+		int word;
+
+		word = mv88e6352_read_eeprom_word(ds, offset >> 1);
+		if (word < 0)
+			return word;
+
+		word = (word & 0xff00) | *data++;
+
+		ret = mv88e6352_write_eeprom_word(ds, offset >> 1, word);
+		if (ret < 0)
+			return ret;
+
+		offset++;
+		len--;
+		eeprom->len++;
+	}
+
+	return 0;
+}
+
 static void
 mv88e6352_get_strings(struct dsa_switch *ds, int port, uint8_t *data)
 {
@@ -562,6 +776,8 @@ struct dsa_switch_driver mv88e6352_switch_driver = {
 	.set_temp_limit		= mv88e6352_set_temp_limit,
 	.get_temp_alarm		= mv88e6352_get_temp_alarm,
 #endif
+	.get_eeprom		= mv88e6352_get_eeprom,
+	.set_eeprom		= mv88e6352_set_eeprom,
 };
 
 MODULE_ALIAS("platform:mv88e6352");
diff --git a/drivers/net/dsa/mv88e6xxx.h b/drivers/net/dsa/mv88e6xxx.h
index c0ce133..29feed0 100644
--- a/drivers/net/dsa/mv88e6xxx.h
+++ b/drivers/net/dsa/mv88e6xxx.h
@@ -43,6 +43,11 @@ struct mv88e6xxx_priv_state {
 	 */
 	struct mutex	phy_mutex;
 
+	/* This mutex serializes eeprom access for chips with
+	 * eeprom support.
+	 */
+	struct mutex eeprom_mutex;
+
 	int		id; /* switch product id */
 };
 
-- 
1.9.1

[PATCH v3 12/15] net: dsa: Add support for reading switch registers with ethtool

[Guenter Roeck]

Add support for reading switch registers with 'ethtool -d'.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v3:
- No change
v2:
- Do not compare new function pointers against NULL
- Check if get_regs is set before calling it

 include/net/dsa.h |  7 +++++++
 net/dsa/slave.c   | 23 +++++++++++++++++++++++
 2 files changed, 30 insertions(+)

diff --git a/include/net/dsa.h b/include/net/dsa.h
index 37856a2..ed3c34b 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -268,6 +268,13 @@ struct dsa_switch_driver {
 			      struct ethtool_eeprom *eeprom, u8 *data);
 	int	(*set_eeprom)(struct dsa_switch *ds,
 			      struct ethtool_eeprom *eeprom, u8 *data);
+
+	/*
+	 * Register access.
+	 */
+	int	(*get_regs_len)(struct dsa_switch *ds, int port);
+	void	(*get_regs)(struct dsa_switch *ds, int port,
+			    struct ethtool_regs *regs, void *p);
 };
 
 void register_switch_driver(struct dsa_switch_driver *type);
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index ff2fbe7..474f296 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -249,6 +249,27 @@ static void dsa_slave_get_drvinfo(struct net_device *dev,
 	strlcpy(drvinfo->bus_info, "platform", sizeof(drvinfo->bus_info));
 }
 
+static int dsa_slave_get_regs_len(struct net_device *dev)
+{
+	struct dsa_slave_priv *p = netdev_priv(dev);
+	struct dsa_switch *ds = p->parent;
+
+	if (ds->drv->get_regs_len)
+		return ds->drv->get_regs_len(ds, p->port);
+
+	return -EOPNOTSUPP;
+}
+
+static void
+dsa_slave_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *_p)
+{
+	struct dsa_slave_priv *p = netdev_priv(dev);
+	struct dsa_switch *ds = p->parent;
+
+	if (ds->drv->get_regs)
+		ds->drv->get_regs(ds, p->port, regs, _p);
+}
+
 static int dsa_slave_nway_reset(struct net_device *dev)
 {
 	struct dsa_slave_priv *p = netdev_priv(dev);
@@ -423,6 +444,8 @@ static const struct ethtool_ops dsa_slave_ethtool_ops = {
 	.get_settings		= dsa_slave_get_settings,
 	.set_settings		= dsa_slave_set_settings,
 	.get_drvinfo		= dsa_slave_get_drvinfo,
+	.get_regs_len		= dsa_slave_get_regs_len,
+	.get_regs		= dsa_slave_get_regs,
 	.nway_reset		= dsa_slave_nway_reset,
 	.get_link		= dsa_slave_get_link,
 	.get_eeprom_len		= dsa_slave_get_eeprom_len,
-- 
1.9.1

[PATCH v3 13/15] net: dsa/mv88e6123_61_65: Add support for reading switch registers

[Guenter Roeck]

The infrastructure can now report switch registers to ethtool.
Add support for it to the mv88e6123_61_65 driver.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v3:
- No change
v2:
- No change

 drivers/net/dsa/mv88e6123_61_65.c |  2 ++
 drivers/net/dsa/mv88e6xxx.c       | 24 ++++++++++++++++++++++++
 drivers/net/dsa/mv88e6xxx.h       |  3 +++
 3 files changed, 29 insertions(+)

diff --git a/drivers/net/dsa/mv88e6123_61_65.c b/drivers/net/dsa/mv88e6123_61_65.c
index 9f43c9b..e2d2e37 100644
--- a/drivers/net/dsa/mv88e6123_61_65.c
+++ b/drivers/net/dsa/mv88e6123_61_65.c
@@ -470,6 +470,8 @@ struct dsa_switch_driver mv88e6123_61_65_switch_driver = {
 #ifdef CONFIG_NET_DSA_HWMON
 	.get_temp		= mv88e6123_61_65_get_temp,
 #endif
+	.get_regs_len		= mv88e6xxx_get_regs_len,
+	.get_regs		= mv88e6xxx_get_regs,
 };
 
 MODULE_ALIAS("platform:mv88e6123");
diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c
index 8e1090b..c071fde 100644
--- a/drivers/net/dsa/mv88e6xxx.c
+++ b/drivers/net/dsa/mv88e6xxx.c
@@ -499,6 +499,30 @@ void mv88e6xxx_get_ethtool_stats(struct dsa_switch *ds,
 	mutex_unlock(&ps->stats_mutex);
 }
 
+int mv88e6xxx_get_regs_len(struct dsa_switch *ds, int port)
+{
+	return 32 * sizeof(u16);
+}
+
+void mv88e6xxx_get_regs(struct dsa_switch *ds, int port,
+			struct ethtool_regs *regs, void *_p)
+{
+	u16 *p = _p;
+	int i;
+
+	regs->version = 0;
+
+	memset(p, 0xff, 32 * sizeof(u16));
+
+	for (i = 0; i < 32; i++) {
+		int ret;
+
+		ret = mv88e6xxx_reg_read(ds, REG_PORT(port), i);
+		if (ret >= 0)
+			p[i] = ret;
+	}
+}
+
 static int __init mv88e6xxx_init(void)
 {
 #if IS_ENABLED(CONFIG_NET_DSA_MV88E6131)
diff --git a/drivers/net/dsa/mv88e6xxx.h b/drivers/net/dsa/mv88e6xxx.h
index 29feed0..a0780b0 100644
--- a/drivers/net/dsa/mv88e6xxx.h
+++ b/drivers/net/dsa/mv88e6xxx.h
@@ -78,6 +78,9 @@ void mv88e6xxx_get_strings(struct dsa_switch *ds,
 void mv88e6xxx_get_ethtool_stats(struct dsa_switch *ds,
 				 int nr_stats, struct mv88e6xxx_hw_stat *stats,
 				 int port, uint64_t *data);
+int mv88e6xxx_get_regs_len(struct dsa_switch *ds, int port);
+void mv88e6xxx_get_regs(struct dsa_switch *ds, int port,
+			struct ethtool_regs *regs, void *_p);
 
 extern struct dsa_switch_driver mv88e6131_switch_driver;
 extern struct dsa_switch_driver mv88e6123_61_65_switch_driver;
-- 
1.9.1

[PATCH v3 14/15] net: dsa/mv88e6352: Add support for reading switch registers

[Guenter Roeck]

Report switch register values to ethtool.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v3:
- No change
v2:
- No change

 drivers/net/dsa/mv88e6352.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/dsa/mv88e6352.c b/drivers/net/dsa/mv88e6352.c
index 8a956f9..d5bbe49 100644
--- a/drivers/net/dsa/mv88e6352.c
+++ b/drivers/net/dsa/mv88e6352.c
@@ -778,6 +778,8 @@ struct dsa_switch_driver mv88e6352_switch_driver = {
 #endif
 	.get_eeprom		= mv88e6352_get_eeprom,
 	.set_eeprom		= mv88e6352_set_eeprom,
+	.get_regs_len		= mv88e6xxx_get_regs_len,
+	.get_regs		= mv88e6xxx_get_regs,
 };
 
 MODULE_ALIAS("platform:mv88e6352");
-- 
1.9.1

[PATCH v3 15/15] net: dsa: Provide additional RMON statistics

[Guenter Roeck]

Display sw_in_discards, sw_in_filtered, and sw_out_filtered for chips
supported by mv88e6123_61_65 and mv88e6352 drivers.

The variables are provided in port registers, not the normal status registers.
Mark by adding 0x100 to the register offset and add special handling code
to mv88e6xxx_get_ethtool_stats.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v3:
- No change
v2:
- No change

 drivers/net/dsa/mv88e6123_61_65.c |  3 +++
 drivers/net/dsa/mv88e6352.c       |  3 +++
 drivers/net/dsa/mv88e6xxx.c       | 26 +++++++++++++++++++++-----
 3 files changed, 27 insertions(+), 5 deletions(-)

diff --git a/drivers/net/dsa/mv88e6123_61_65.c b/drivers/net/dsa/mv88e6123_61_65.c
index e2d2e37..9a3f9e0 100644
--- a/drivers/net/dsa/mv88e6123_61_65.c
+++ b/drivers/net/dsa/mv88e6123_61_65.c
@@ -433,6 +433,9 @@ static struct mv88e6xxx_hw_stat mv88e6123_61_65_hw_stats[] = {
 	{ "hist_256_511bytes", 4, 0x0b, },
 	{ "hist_512_1023bytes", 4, 0x0c, },
 	{ "hist_1024_max_bytes", 4, 0x0d, },
+	{ "sw_in_discards", 4, 0x110, },
+	{ "sw_in_filtered", 2, 0x112, },
+	{ "sw_out_filtered", 2, 0x113, },
 };
 
 static void
diff --git a/drivers/net/dsa/mv88e6352.c b/drivers/net/dsa/mv88e6352.c
index d5bbe49..258d9ef 100644
--- a/drivers/net/dsa/mv88e6352.c
+++ b/drivers/net/dsa/mv88e6352.c
@@ -539,6 +539,9 @@ static struct mv88e6xxx_hw_stat mv88e6352_hw_stats[] = {
 	{ "hist_256_511bytes", 4, 0x0b, },
 	{ "hist_512_1023bytes", 4, 0x0c, },
 	{ "hist_1024_max_bytes", 4, 0x0d, },
+	{ "sw_in_discards", 4, 0x110, },
+	{ "sw_in_filtered", 2, 0x112, },
+	{ "sw_out_filtered", 2, 0x113, },
 };
 
 static int mv88e6352_read_eeprom_word(struct dsa_switch *ds, int addr)
diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c
index c071fde..da558d8 100644
--- a/drivers/net/dsa/mv88e6xxx.c
+++ b/drivers/net/dsa/mv88e6xxx.c
@@ -485,17 +485,33 @@ void mv88e6xxx_get_ethtool_stats(struct dsa_switch *ds,
 	for (i = 0; i < nr_stats; i++) {
 		struct mv88e6xxx_hw_stat *s = stats + i;
 		u32 low;
-		u32 high;
-
+		u32 high = 0;
+
+		if (s->reg >= 0x100) {
+			int ret;
+
+			ret = mv88e6xxx_reg_read(ds, REG_PORT(port),
+						 s->reg - 0x100);
+			if (ret < 0)
+				goto error;
+			low = ret;
+			if (s->sizeof_stat == 4) {
+				ret = mv88e6xxx_reg_read(ds, REG_PORT(port),
+							 s->reg - 0x100 + 1);
+				if (ret < 0)
+					goto error;
+				high = ret;
+			}
+			data[i] = (((u64)high) << 16) | low;
+			continue;
+		}
 		mv88e6xxx_stats_read(ds, s->reg, &low);
 		if (s->sizeof_stat == 8)
 			mv88e6xxx_stats_read(ds, s->reg + 1, &high);
-		else
-			high = 0;
 
 		data[i] = (((u64)high) << 32) | low;
 	}
-
+error:
 	mutex_unlock(&ps->stats_mutex);
 }
 
-- 
1.9.1

Re: [PATCH v3 00/15] net: dsa: Fixes and enhancements

[Florian Fainelli]

On 10/29/2014 10:44 AM, Guenter Roeck wrote:
> Patch 01/15 addresses a bug indicated by an an annoying and unhelpful
> log message.
> 
> Patches 02/15 and 03/15 are minor enhancements, adding support for
> known switch revisions.
> 
> Patches 04/15 and 05/15 add support for MV88E6352 and MV88E6176.
> 
> Patch 06/15 adds support for hardware monitoring, specifically for
> reporting the chip temperature, to the dsa subsystem.
> 
> Patches 07/15 and 08/15 implement hardware monitoring for MV88E6352,
> MV88E6176, MV88E6123, MV88E6161, and MV88E6165.
> 
> Patch 09/15 and 10/15 add support for EEPROM access to the DSA subsystem.
> 
> Patch 11/15 implements EEPROM access for MV88E6352 and MV88E6176.
> 
> Patch 12/15 adds support for reading switch registers to the DSA
> subsystem.
> 
> Patches 13/15 amd 14/15 implement support for reading switch registers
> to the drivers for MV88E6352, MV88E6176, MV88E6123, MV88E6161, and MV88E6165.
> 
> Patch 15/15 adds support for reading additional RMON registers to the drivers
> for  MV88E6352, MV88E6176, MV88E6123, MV88E6161, and MV88E6165.
> 
> The series was tested on top of v3.18-rc2 in an x86 system with MV88E6352.
> Testing in systems with 88E6131, 88E6060 and MV88E6165 was done earlier
> (I don't have access to those systems right now). The series was also build
> tested using my build system at http://server.roeck-us.net:8010/builders.
> Look into the 'dsa' column for build results.
> 
> The series merges cleanly into net-next as of today (10/29).

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>

Thanks Guenter!

> 
> v3:
> - Fix bug in eeprom patches seen if devicetree is enabled:
>   eeprom-length property is attached to switch devicetree node,
>   not to dsa node, and there was a compile error.
> v2:
> - Made reporting chip temperatures through the hwmon subsystem optional
>   with new Kconfig option
> - Changed the hwmon chip name to <network device name>_dsa<index>
> - Made EEPROM presence and size configurable through platform and devicetree
>   data
> - Various minor changes and fixes (see individual patches for details)
> 
> ----------------------------------------------------------------
> The following changes since commit cac7f2429872d3733dc3f9915857b1691da2eb2f:
> 
>   Linux 3.18-rc2 (2014-10-26 16:48:41 -0700)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git dsa
> 
> for you to fetch changes up to 245472a4f3ca2a68c5632f2c37da41aa2d3fb2f0:
> 
>   net: dsa: Provide additional RMON statistics (2014-10-29 08:55:37 -0700)
> 
> ----------------------------------------------------------------
> Guenter Roeck (15):
>       net: dsa: Don't set skb->protocol on outgoing tagged packets
>       net: dsa: Report known silicon revisions for Marvell 88E6060
>       net: dsa: Report known silicon revisions for Marvell 88E6131
>       net: dsa: Add support for Marvell 88E6352
>       net: dsa/mv88e6352: Add support for MV88E6176
>       net: dsa: Add support for reporting switch chip temperatures
>       net: dsa/mv88e6352: Report chip temperature
>       net: dsa/mv88e6123_61_65: Report chip temperature
>       net: dsa: Add support for switch EEPROM access
>       dsa: Add new optional devicetree property to describe EEPROM size
>       net: dsa/mv88e6352: Implement EEPROM access functions
>       net: dsa: Add support for reading switch registers with ethtool
>       net: dsa/mv88e6123_61_65: Add support for reading switch registers
>       net: dsa/mv88e6352: Add support for reading switch registers
>       net: dsa: Provide additional RMON statistics
> 
>  Documentation/devicetree/bindings/net/dsa/dsa.txt |   9 +-
>  MAINTAINERS                                       |   5 +
>  drivers/net/dsa/Kconfig                           |   9 +
>  drivers/net/dsa/Makefile                          |   3 +
>  drivers/net/dsa/mv88e6060.c                       |   5 +-
>  drivers/net/dsa/mv88e6123_61_65.c                 |  73 +-
>  drivers/net/dsa/mv88e6131.c                       |  12 +-
>  drivers/net/dsa/mv88e6352.c                       | 788 ++++++++++++++++++++++
>  drivers/net/dsa/mv88e6xxx.c                       |  53 +-
>  drivers/net/dsa/mv88e6xxx.h                       |  15 +
>  include/net/dsa.h                                 |  33 +
>  net/dsa/Kconfig                                   |  11 +
>  net/dsa/dsa.c                                     | 135 ++++
>  net/dsa/slave.c                                   |  64 ++
>  net/dsa/tag_dsa.c                                 |   2 -
>  net/dsa/tag_edsa.c                                |   2 -
>  net/dsa/tag_trailer.c                             |   2 -
>  17 files changed, 1202 insertions(+), 19 deletions(-)
>  create mode 100644 drivers/net/dsa/mv88e6352.c
> 

Re: [PATCH v3 00/15] net: dsa: Fixes and enhancements

[Guenter Roeck]

On Wed, Oct 29, 2014 at 11:22:19AM -0700, Florian Fainelli wrote:
> On 10/29/2014 10:44 AM, Guenter Roeck wrote:
> > Patch 01/15 addresses a bug indicated by an an annoying and unhelpful
> > log message.
> > 
> > Patches 02/15 and 03/15 are minor enhancements, adding support for
> > known switch revisions.
> > 
> > Patches 04/15 and 05/15 add support for MV88E6352 and MV88E6176.
> > 
> > Patch 06/15 adds support for hardware monitoring, specifically for
> > reporting the chip temperature, to the dsa subsystem.
> > 
> > Patches 07/15 and 08/15 implement hardware monitoring for MV88E6352,
> > MV88E6176, MV88E6123, MV88E6161, and MV88E6165.
> > 
> > Patch 09/15 and 10/15 add support for EEPROM access to the DSA subsystem.
> > 
> > Patch 11/15 implements EEPROM access for MV88E6352 and MV88E6176.
> > 
> > Patch 12/15 adds support for reading switch registers to the DSA
> > subsystem.
> > 
> > Patches 13/15 amd 14/15 implement support for reading switch registers
> > to the drivers for MV88E6352, MV88E6176, MV88E6123, MV88E6161, and MV88E6165.
> > 
> > Patch 15/15 adds support for reading additional RMON registers to the drivers
> > for  MV88E6352, MV88E6176, MV88E6123, MV88E6161, and MV88E6165.
> > 
> > The series was tested on top of v3.18-rc2 in an x86 system with MV88E6352.
> > Testing in systems with 88E6131, 88E6060 and MV88E6165 was done earlier
> > (I don't have access to those systems right now). The series was also build
> > tested using my build system at http://server.roeck-us.net:8010/builders.
> > Look into the 'dsa' column for build results.
> > 
> > The series merges cleanly into net-next as of today (10/29).
> 
> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
> 
> Thanks Guenter!
> 
Thanks a lot for the review!

Guenter

Re: [PATCH v3 00/15] net: dsa: Fixes and enhancements

[David Miller]

From: Guenter Roeck <linux@roeck-us.net>
Date: Wed, 29 Oct 2014 14:39:28 -0700

> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>

Series applied, thanks everyone.