From: Fabian Frederick <fabf@skynet.be>
To: linux-kernel@vger.kernel.org
Cc: Fabian Frederick <fabf@skynet.be>,
"David S. Miller" <davem@davemloft.net>,
Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>,
James Morris <jmorris@namei.org>,
Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>,
Patrick McHardy <kaber@trash.net>,
netdev@vger.kernel.org
Subject: [PATCH 1/1 net-next] igmp: remove camel case definitions
Date: Tue, 4 Nov 2014 20:52:14 +0100 [thread overview]
Message-ID: <1415130734-17124-1-git-send-email-fabf@skynet.be> (raw)
use standard uppercase for definitions
Signed-off-by: Fabian Frederick <fabf@skynet.be>
---
net/ipv4/igmp.c | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c
index fb70e3e..3f80513 100644
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -112,17 +112,17 @@
#ifdef CONFIG_IP_MULTICAST
/* Parameter names and values are taken from igmp-v2-06 draft */
-#define IGMP_V1_Router_Present_Timeout (400*HZ)
-#define IGMP_V2_Router_Present_Timeout (400*HZ)
-#define IGMP_V2_Unsolicited_Report_Interval (10*HZ)
-#define IGMP_V3_Unsolicited_Report_Interval (1*HZ)
-#define IGMP_Query_Response_Interval (10*HZ)
-#define IGMP_Query_Robustness_Variable 2
+#define IGMP_V1_ROUTER_PRESENT_TIMEOUT (400*HZ)
+#define IGMP_V2_ROUTER_PRESENT_TIMEOUT (400*HZ)
+#define IGMP_V2_UNSOLICITED_REPORT_INTERVAL (10*HZ)
+#define IGMP_V3_UNSOLICITED_REPORT_INTERVAL (1*HZ)
+#define IGMP_QUERY_RESPONSE_INTERVAL (10*HZ)
+#define IGMP_QUERY_ROBUSTNESS_VARIABLE 2
-#define IGMP_Initial_Report_Delay (1)
+#define IGMP_INITIAL_REPORT_DELAY (1)
-/* IGMP_Initial_Report_Delay is not from IGMP specs!
+/* IGMP_INITIAL_REPORT_DELAY is not from IGMP specs!
* IGMP specs require to report membership immediately after
* joining a group, but we delay the first report by a
* small interval. It seems more natural and still does not
@@ -879,15 +879,15 @@ static bool igmp_heard_query(struct in_device *in_dev, struct sk_buff *skb,
if (ih->code == 0) {
/* Alas, old v1 router presents here. */
- max_delay = IGMP_Query_Response_Interval;
+ max_delay = IGMP_QUERY_RESPONSE_INTERVAL;
in_dev->mr_v1_seen = jiffies +
- IGMP_V1_Router_Present_Timeout;
+ IGMP_V1_ROUTER_PRESENT_TIMEOUT;
group = 0;
} else {
/* v2 router present */
max_delay = ih->code*(HZ/IGMP_TIMER_SCALE);
in_dev->mr_v2_seen = jiffies +
- IGMP_V2_Router_Present_Timeout;
+ IGMP_V2_ROUTER_PRESENT_TIMEOUT;
}
/* cancel the interface change timer */
in_dev->mr_ifc_count = 0;
@@ -899,7 +899,7 @@ static bool igmp_heard_query(struct in_device *in_dev, struct sk_buff *skb,
return true; /* ignore bogus packet; freed by caller */
} else if (IGMP_V1_SEEN(in_dev)) {
/* This is a v3 query with v1 queriers present */
- max_delay = IGMP_Query_Response_Interval;
+ max_delay = IGMP_QUERY_RESPONSE_INTERVAL;
group = 0;
} else if (IGMP_V2_SEEN(in_dev)) {
/* this is a v3 query with v2 queriers present;
@@ -1218,7 +1218,7 @@ static void igmp_group_added(struct ip_mc_list *im)
return;
if (IGMP_V1_SEEN(in_dev) || IGMP_V2_SEEN(in_dev)) {
spin_lock_bh(&im->lock);
- igmp_start_timer(im, IGMP_Initial_Report_Delay);
+ igmp_start_timer(im, IGMP_INITIAL_REPORT_DELAY);
spin_unlock_bh(&im->lock);
return;
}
@@ -1541,7 +1541,7 @@ static struct in_device *ip_mc_find_dev(struct net *net, struct ip_mreqn *imr)
int sysctl_igmp_max_memberships __read_mostly = IP_MAX_MEMBERSHIPS;
int sysctl_igmp_max_msf __read_mostly = IP_MAX_MSF;
#ifdef CONFIG_IP_MULTICAST
-int sysctl_igmp_qrv __read_mostly = IGMP_Query_Robustness_Variable;
+int sysctl_igmp_qrv __read_mostly = IGMP_QUERY_ROBUSTNESS_VARIABLE;
#endif
static int ip_mc_del1_src(struct ip_mc_list *pmc, int sfmode,
--
1.9.3
next reply other threads:[~2014-11-04 19:52 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-04 19:52 Fabian Frederick [this message]
2014-11-04 20:14 ` [PATCH 1/1 net-next] igmp: remove camel case definitions David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1415130734-17124-1-git-send-email-fabf@skynet.be \
--to=fabf@skynet.be \
--cc=davem@davemloft.net \
--cc=jmorris@namei.org \
--cc=kaber@trash.net \
--cc=kuznet@ms2.inr.ac.ru \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=yoshfuji@linux-ipv6.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox