[PATCH V4 3/3] can: m_can: add missing message RAM initialization

[Dong Aisheng <b29396@freescale.com>]

The M_CAN message RAM is usually equipped with a parity or ECC functionality.
But RAM cells suffer a hardware reset and can therefore hold arbitrary
content at startup - including parity and/or ECC bits.

To prevent the M_CAN controller detecting checksum errors when reading
potentially uninitialized TX message RAM content to transmit CAN
frames the TX message RAM has to be written with (any kind of) initial
data.

Signed-off-by: Dong Aisheng <b29396@freescale.com>
---
ChangeLog:
v3-v4:
 * initialize the entire Message RAM in use instead of only 8 bytes
   since this is a valid and needed initialization process.
   Patch title also changed.
---
 drivers/net/can/m_can/m_can.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index eee1533..de742d0 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -1114,7 +1114,7 @@ static int m_can_of_parse_mram(struct platform_device *pdev,
 	struct resource *res;
 	void __iomem *addr;
 	u32 out_val[MRAM_CFG_LEN];
-	int ret;
+	int i, start, end, ret;
 
 	/* message ram could be shared */
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "message_ram");
@@ -1165,6 +1165,15 @@ static int m_can_of_parse_mram(struct platform_device *pdev,
 		priv->mcfg[MRAM_TXE].off, priv->mcfg[MRAM_TXE].num,
 		priv->mcfg[MRAM_TXB].off, priv->mcfg[MRAM_TXB].num);
 
+	/* initialize the entire Message RAM in use to avoid possible
+	 * ECC/parity checksum errors when reading an uninitialized buffer
+	 */
+	start = priv->mcfg[MRAM_SIDF].off;
+	end = priv->mcfg[MRAM_TXB].off +
+		priv->mcfg[MRAM_TXB].num * TXB_ELEMENT_SIZE;
+	for (i = start; i < end; i += 4)
+		writel(0x0, priv->mram_base + i);
+
 	return 0;
 }
 
-- 
1.9.1