From: "Lothar Waßmann" <LW@KARO-electronics.de>
To: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>,
"Russell King" <rmk+kernel@arm.linux.org.uk>,
"Frank Li" <Frank.Li@freescale.com>,
"Fabio Estevam" <fabio.estevam@freescale.com>,
linux-kernel@vger.kernel.org,
"Lothar Waßmann" <LW@KARO-electronics.de>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCHv4 1/1] net: fec: fix regression on i.MX28 introduced by rx_copybreak support
Date: Fri, 7 Nov 2014 10:02:47 +0100 [thread overview]
Message-ID: <1415350967-2238-2-git-send-email-LW@KARO-electronics.de> (raw)
In-Reply-To: <1415350967-2238-1-git-send-email-LW@KARO-electronics.de>
commit 1b7bde6d659d ("net: fec: implement rx_copybreak to improve rx performance")
introduced a regression for i.MX28. The swap_buffer() function doing
the endian conversion of the received data on i.MX28 may access memory
beyond the actual packet size in the DMA buffer. fec_enet_copybreak()
does not copy those bytes, so that the last bytes of a packet may be
filled with invalid data after swapping.
This will likely lead to checksum errors on received packets.
E.g. when trying to mount an NFS rootfs:
UDP: bad checksum. From 192.168.1.225:111 to 192.168.100.73:44662 ulen 36
Do the byte swapping and copying to the new skb in one go if
necessary.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
---
drivers/net/ethernet/freescale/fec_main.c | 23 +++++++++++++++++++----
1 file changed, 19 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index c27128d..3dca494 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -298,6 +298,16 @@ static void *swap_buffer(void *bufaddr, int len)
return bufaddr;
}
+static void swap_buffer2(void *dst_buf, void *src_buf, int len)
+{
+ int i;
+ unsigned int *src = src_buf;
+ unsigned int *dst = dst_buf;
+
+ for (i = 0; i < len; i += 4, src++, dst++)
+ *dst = swab32p(src);
+}
+
static void fec_dump(struct net_device *ndev)
{
struct fec_enet_private *fep = netdev_priv(ndev);
@@ -1307,7 +1317,7 @@ fec_enet_new_rxbdp(struct net_device *ndev, struct bufdesc *bdp, struct sk_buff
}
static bool fec_enet_copybreak(struct net_device *ndev, struct sk_buff **skb,
- struct bufdesc *bdp, u32 length)
+ struct bufdesc *bdp, u32 length, bool swap)
{
struct fec_enet_private *fep = netdev_priv(ndev);
struct sk_buff *new_skb;
@@ -1322,7 +1332,10 @@ static bool fec_enet_copybreak(struct net_device *ndev, struct sk_buff **skb,
dma_sync_single_for_cpu(&fep->pdev->dev, bdp->cbd_bufaddr,
FEC_ENET_RX_FRSIZE - fep->rx_align,
DMA_FROM_DEVICE);
- memcpy(new_skb->data, (*skb)->data, length);
+ if (!swap)
+ memcpy(new_skb->data, (*skb)->data, length);
+ else
+ swap_buffer2(new_skb->data, (*skb)->data, length);
*skb = new_skb;
return true;
@@ -1352,6 +1365,7 @@ fec_enet_rx_queue(struct net_device *ndev, int budget, u16 queue_id)
u16 vlan_tag;
int index = 0;
bool is_copybreak;
+ bool need_swap = id_entry->driver_data & FEC_QUIRK_SWAP_FRAME;
#ifdef CONFIG_M532x
flush_cache_all();
@@ -1415,7 +1429,8 @@ fec_enet_rx_queue(struct net_device *ndev, int budget, u16 queue_id)
* include that when passing upstream as it messes up
* bridging applications.
*/
- is_copybreak = fec_enet_copybreak(ndev, &skb, bdp, pkt_len - 4);
+ is_copybreak = fec_enet_copybreak(ndev, &skb, bdp, pkt_len - 4,
+ need_swap);
if (!is_copybreak) {
skb_new = netdev_alloc_skb(ndev, FEC_ENET_RX_FRSIZE);
if (unlikely(!skb_new)) {
@@ -1430,7 +1445,7 @@ fec_enet_rx_queue(struct net_device *ndev, int budget, u16 queue_id)
prefetch(skb->data - NET_IP_ALIGN);
skb_put(skb, pkt_len - 4);
data = skb->data;
- if (id_entry->driver_data & FEC_QUIRK_SWAP_FRAME)
+ if (!is_copybreak && need_swap)
swap_buffer(data, pkt_len);
/* Extract the enhanced buffer descriptor */
--
1.7.10.4
next prev parent reply other threads:[~2014-11-07 9:02 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-07 9:02 [PATCHv4 0/1] net: fec: fix regression on i.MX28 introduced by rx_copybreak support Lothar Waßmann
2014-11-07 9:02 ` Lothar Waßmann [this message]
2014-11-07 12:26 ` [PATCHv4 1/1] " Fabio Estevam
2014-11-07 17:09 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1415350967-2238-2-git-send-email-LW@KARO-electronics.de \
--to=lw@karo-electronics.de \
--cc=Frank.Li@freescale.com \
--cc=davem@davemloft.net \
--cc=fabio.estevam@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=rmk+kernel@arm.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).