[PATCH V1 net-next] net/fm10k: Avoid double setting of NETIF_F_SG for the HW encapsulation feature mask

[Or Gerlitz <ogerlitz@mellanox.com>]

The networking core does it for the driver during registration time.

Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
---

changes from v0:
 - set alignment to be per the request of Matthew Vick


 drivers/net/ethernet/intel/fm10k/fm10k_netdev.c |   13 ++++++-------
 1 files changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c b/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c
index 8811364..14882dc 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c
@@ -1414,13 +1414,12 @@ struct net_device *fm10k_alloc_netdev(void)
 	dev->vlan_features |= dev->features;
 
 	/* configure tunnel offloads */
-	dev->hw_enc_features = NETIF_F_IP_CSUM |
-			       NETIF_F_TSO |
-			       NETIF_F_TSO6 |
-			       NETIF_F_TSO_ECN |
-			       NETIF_F_GSO_UDP_TUNNEL |
-			       NETIF_F_IPV6_CSUM |
-			       NETIF_F_SG;
+	dev->hw_enc_features |= NETIF_F_IP_CSUM |
+			        NETIF_F_TSO |
+			        NETIF_F_TSO6 |
+			        NETIF_F_TSO_ECN |
+			        NETIF_F_GSO_UDP_TUNNEL |
+			        NETIF_F_IPV6_CSUM;
 
 	/* we want to leave these both on as we cannot disable VLAN tag
 	 * insertion or stripping on the hardware since it is contained
-- 
1.7.1