[PATCH 05/22] net: phy: micrel: fix config_intr error handling

[Johan Hovold <johan@kernel.org>]

Make sure never to update the control register with random data (an
error code) by checking the return value after reading it.

Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/net/phy/micrel.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index bcc6c0ea75fa..62ca9613a514 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -122,6 +122,8 @@ static int kszphy_config_intr(struct phy_device *phydev)
 
 	/* set the interrupt pin active low */
 	temp = phy_read(phydev, MII_KSZPHY_CTRL);
+	if (temp < 0)
+		return temp;
 	temp &= ~KSZPHY_CTRL_INT_ACTIVE_HIGH;
 	phy_write(phydev, MII_KSZPHY_CTRL, temp);
 	rc = kszphy_set_interrupt(phydev);
@@ -134,6 +136,8 @@ static int ksz9021_config_intr(struct phy_device *phydev)
 
 	/* set the interrupt pin active low */
 	temp = phy_read(phydev, MII_KSZPHY_CTRL);
+	if (temp < 0)
+		return temp;
 	temp &= ~KSZ9021_CTRL_INT_ACTIVE_HIGH;
 	phy_write(phydev, MII_KSZPHY_CTRL, temp);
 	rc = kszphy_set_interrupt(phydev);
@@ -146,6 +150,8 @@ static int ks8737_config_intr(struct phy_device *phydev)
 
 	/* set the interrupt pin active low */
 	temp = phy_read(phydev, MII_KSZPHY_CTRL);
+	if (temp < 0)
+		return temp;
 	temp &= ~KS8737_CTRL_INT_ACTIVE_HIGH;
 	phy_write(phydev, MII_KSZPHY_CTRL, temp);
 	rc = kszphy_set_interrupt(phydev);
-- 
2.0.4