[PATCH net-next 1/5] net: phy: bcm7xxx: only show PHY revision once

[Florian Fainelli <f.fainelli@gmail.com>]

bcm7xxx_28nm_config_init() can be called as frequently as needed by the
PHY library upon suspend/resume cycles and interface bring up/down, just
print the PHY revision once and for all in order not to spam kernel
logs.

Fixes: d8ebfed3f11b ("net: phy: bcm7xxx: utilize PHY revision in config_init")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/phy/bcm7xxx.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index 1d211d369039..25b07a4d31f8 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -200,7 +200,8 @@ static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
 	u8 patch = PHY_BRCM_7XXX_PATCH(phydev->dev_flags);
 	int ret = 0;
 
-	dev_info(&phydev->dev, "PHY revision: 0x%02x, patch: %d\n", rev, patch);
+	pr_info_once("%s: %s PHY revision: 0x%02x, patch: %d\n",
+		     dev_name(&phydev->dev), phydev->drv->name, rev, patch);
 
 	switch (rev) {
 	case 0xa0:
-- 
1.9.1