From: Andrew Lunn <andrew@lunn.ch>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, linux@roeck-us.net, Andrew Lunn <andrew@lunn.ch>
Subject: [PATCH 1/3] net: dsa: Centralise code for reading the temperature sensor
Date: Sat, 15 Nov 2014 22:24:51 +0100 [thread overview]
Message-ID: <1416086694-15790-2-git-send-email-andrew@lunn.ch> (raw)
In-Reply-To: <1416086694-15790-1-git-send-email-andrew@lunn.ch>
The method to read the temperature used in the mve6123_61_65 driver
can also be used for other chips. Move the code into the shared code
base of mv88e6xxx.c.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
drivers/net/dsa/mv88e6123_61_65.c | 50 +--------------------------------------
drivers/net/dsa/mv88e6xxx.c | 48 +++++++++++++++++++++++++++++++++++++
drivers/net/dsa/mv88e6xxx.h | 1 +
3 files changed, 50 insertions(+), 49 deletions(-)
diff --git a/drivers/net/dsa/mv88e6123_61_65.c b/drivers/net/dsa/mv88e6123_61_65.c
index 9a3f9e0b0532..e9c736e1cef3 100644
--- a/drivers/net/dsa/mv88e6123_61_65.c
+++ b/drivers/net/dsa/mv88e6123_61_65.c
@@ -291,54 +291,6 @@ static int mv88e6123_61_65_setup_port(struct dsa_switch *ds, int p)
return 0;
}
-#ifdef CONFIG_NET_DSA_HWMON
-
-static int mv88e6123_61_65_get_temp(struct dsa_switch *ds, int *temp)
-{
- struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
- int ret;
- int val;
-
- *temp = 0;
-
- mutex_lock(&ps->phy_mutex);
-
- ret = mv88e6xxx_phy_write(ds, 0x0, 0x16, 0x6);
- if (ret < 0)
- goto error;
-
- /* Enable temperature sensor */
- ret = mv88e6xxx_phy_read(ds, 0x0, 0x1a);
- if (ret < 0)
- goto error;
-
- ret = mv88e6xxx_phy_write(ds, 0x0, 0x1a, ret | (1 << 5));
- if (ret < 0)
- goto error;
-
- /* Wait for temperature to stabilize */
- usleep_range(10000, 12000);
-
- val = mv88e6xxx_phy_read(ds, 0x0, 0x1a);
- if (val < 0) {
- ret = val;
- goto error;
- }
-
- /* Disable temperature sensor */
- ret = mv88e6xxx_phy_write(ds, 0x0, 0x1a, ret & ~(1 << 5));
- if (ret < 0)
- goto error;
-
- *temp = ((val & 0x1f) - 5) * 5;
-
-error:
- mv88e6xxx_phy_write(ds, 0x0, 0x16, 0x0);
- mutex_unlock(&ps->phy_mutex);
- return ret;
-}
-#endif /* CONFIG_NET_DSA_HWMON */
-
static int mv88e6123_61_65_setup(struct dsa_switch *ds)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
@@ -471,7 +423,7 @@ struct dsa_switch_driver mv88e6123_61_65_switch_driver = {
.get_ethtool_stats = mv88e6123_61_65_get_ethtool_stats,
.get_sset_count = mv88e6123_61_65_get_sset_count,
#ifdef CONFIG_NET_DSA_HWMON
- .get_temp = mv88e6123_61_65_get_temp,
+ .get_temp = mv88e6xxx_get_temp,
#endif
.get_regs_len = mv88e6xxx_get_regs_len,
.get_regs = mv88e6xxx_get_regs,
diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c
index da558d887dad..cd6807c6b4ed 100644
--- a/drivers/net/dsa/mv88e6xxx.c
+++ b/drivers/net/dsa/mv88e6xxx.c
@@ -539,6 +539,54 @@ void mv88e6xxx_get_regs(struct dsa_switch *ds, int port,
}
}
+#ifdef CONFIG_NET_DSA_HWMON
+
+int mv88e6xxx_get_temp(struct dsa_switch *ds, int *temp)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int ret;
+ int val;
+
+ *temp = 0;
+
+ mutex_lock(&ps->phy_mutex);
+
+ ret = mv88e6xxx_phy_write(ds, 0x0, 0x16, 0x6);
+ if (ret < 0)
+ goto error;
+
+ /* Enable temperature sensor */
+ ret = mv88e6xxx_phy_read(ds, 0x0, 0x1a);
+ if (ret < 0)
+ goto error;
+
+ ret = mv88e6xxx_phy_write(ds, 0x0, 0x1a, ret | (1 << 5));
+ if (ret < 0)
+ goto error;
+
+ /* Wait for temperature to stabilize */
+ usleep_range(10000, 12000);
+
+ val = mv88e6xxx_phy_read(ds, 0x0, 0x1a);
+ if (val < 0) {
+ ret = val;
+ goto error;
+ }
+
+ /* Disable temperature sensor */
+ ret = mv88e6xxx_phy_write(ds, 0x0, 0x1a, ret & ~(1 << 5));
+ if (ret < 0)
+ goto error;
+
+ *temp = ((val & 0x1f) - 5) * 5;
+
+error:
+ mv88e6xxx_phy_write(ds, 0x0, 0x16, 0x0);
+ mutex_unlock(&ps->phy_mutex);
+ return ret;
+}
+#endif /* CONFIG_NET_DSA_HWMON */
+
static int __init mv88e6xxx_init(void)
{
#if IS_ENABLED(CONFIG_NET_DSA_MV88E6131)
diff --git a/drivers/net/dsa/mv88e6xxx.h b/drivers/net/dsa/mv88e6xxx.h
index a0780b08bb4c..03e397efde36 100644
--- a/drivers/net/dsa/mv88e6xxx.h
+++ b/drivers/net/dsa/mv88e6xxx.h
@@ -81,6 +81,7 @@ void mv88e6xxx_get_ethtool_stats(struct dsa_switch *ds,
int mv88e6xxx_get_regs_len(struct dsa_switch *ds, int port);
void mv88e6xxx_get_regs(struct dsa_switch *ds, int port,
struct ethtool_regs *regs, void *_p);
+int mv88e6xxx_get_temp(struct dsa_switch *ds, int *temp);
extern struct dsa_switch_driver mv88e6131_switch_driver;
extern struct dsa_switch_driver mv88e6123_61_65_switch_driver;
--
2.1.3
next prev parent reply other threads:[~2014-11-15 21:25 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-15 21:24 [PATCH 0/3] Add temperature reading and registers dump to mv88e6171 Andrew Lunn
2014-11-15 21:24 ` Andrew Lunn [this message]
2014-11-15 21:24 ` [PATCH 2/3] net: dsa: mv88e6171: Add support for reading the temperature Andrew Lunn
2014-11-15 21:24 ` [PATCH 3/3] net: dsa: mv88e6171: Add support for reading switch registers Andrew Lunn
2014-11-16 20:48 ` [PATCH 0/3] Add temperature reading and registers dump to mv88e6171 David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1416086694-15790-2-git-send-email-andrew@lunn.ch \
--to=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=linux@roeck-us.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox