Re: [linux-nics] [PATCHv3 net] i40e: Implement ndo_gso_check()

[Jeff Kirsher <jeffrey.t.kirsher@intel.com>]

[-- Attachment #1: Type: text/plain, Size: 2491 bytes --]

On Thu, 2014-12-04 at 22:11 +0300, Sergei Shtylyov wrote:
> Hello.
> 
> On 12/04/2014 09:39 PM, Joe Stringer wrote:
> 
> > ndo_gso_check() was recently introduced to allow NICs to report the
> > offloading support that they have on a per-skb basis. Add an
> > implementation for this driver which checks for IPIP, GRE, UDP tunnels.
> 
> > Signed-off-by: Joe Stringer <joestringer@nicira.com>
> > ---
> > v3: Drop IPIP and GRE (no driver support even though hw supports it).
> >      Check for UDP outer protocol for UDP tunnels.
> > v2: Expand to include IP in IP and IPv4/IPv6 inside GRE/UDP tunnels.
> >      Add MAX_INNER_LENGTH (as 80).
> > ---
> >   drivers/net/ethernet/intel/i40e/i40e_main.c |   26 ++++++++++++++++++++++++++
> >   1 file changed, 26 insertions(+)
> 
> > diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
> > index c3a7f4a..0d6493a 100644
> > --- a/drivers/net/ethernet/intel/i40e/i40e_main.c
> > +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
> > @@ -7447,6 +7447,31 @@ static int i40e_ndo_fdb_dump(struct sk_buff *skb,
> >
> >   #endif /* USE_DEFAULT_FDB_DEL_DUMP */
> >   #endif /* HAVE_FDB_OPS */
> 
>     Need empty line here, I think.

Nope, look above the #endif's, that is the blank line that you are
wanting if the above #ifdefs are defined and if not, the blank line is
before the #ifdef's.  So if you were to add a blank line as you
requested, there is a possibility of 2 blank lines in a row.  So it is
not needed.

> 
> > +static bool i40e_gso_check(struct sk_buff *skb, struct net_device *dev)
> > +{
> > +	if (skb_shinfo(skb)->gso_type & SKB_GSO_UDP_TUNNEL) {
> > +		unsigned char *ihdr;
> > +
> > +		if (skb->protocol != IPPROTO_UDP ||
> > +		    skb->inner_protocol_type != ENCAP_TYPE_ETHER)
> > +			return false;
> > +
> > +		if (skb->inner_protocol == htons(ETH_P_TEB))
> > +			ihdr = skb_inner_mac_header(skb);
> > +		else if (skb->inner_protocol == htons(ETH_P_IP) ||
> > +			 skb->inner_protocol == htons(ETH_P_IPV6))
> > +			ihdr = skb_inner_network_header(skb);
> > +		else
> > +			return false;
> 
>     The above is asking to be a *switch* instead, no?
> 
> > +
> > +#define MAX_TUNNEL_HDR_LEN	80
> 
>     I'd #define this just above the function, if not at the start of the file...
> 
> [...]
> 
> WBR, Sergei
> 
> _______________________________________________
> Linux-nics mailing list
> Linux-nics@intel.com



[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 819 bytes --]