From: Chunhao Lin <hau@realtek.com>
To: <netdev@vger.kernel.org>
Cc: <nic_swsd@realtek.com>, <linux-kernel@vger.kernel.org>,
Chunhao Lin <hau@realtek.com>
Subject: [PATCH net-next 7/9] r8169:update rtl8168dp ephy parameter
Date: Wed, 10 Dec 2014 00:46:01 +0800 [thread overview]
Message-ID: <1418143563-7652-8-git-send-email-hau@realtek.com> (raw)
In-Reply-To: <1418143563-7652-1-git-send-email-hau@realtek.com>
Update rtl8168dp ephy parameter to improve pcie compatibility.
Signed-off-by: Chunhao Lin <hau@realtek.com>
---
drivers/net/ethernet/realtek/r8169.c | 39 ++++++++----------------------------
1 file changed, 8 insertions(+), 31 deletions(-)
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index a979519..42eda35 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -5730,45 +5730,25 @@ static void rtl_hw_start_8168d(struct rtl8169_private *tp)
RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R8168_CPCMD_QUIRK_MASK);
}
-static void rtl_hw_start_8168dp(struct rtl8169_private *tp)
-{
- void __iomem *ioaddr = tp->mmio_addr;
- struct pci_dev *pdev = tp->pci_dev;
-
- rtl_csi_access_enable_1(tp);
-
- if (tp->dev->mtu <= ETH_DATA_LEN)
- rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
-
- RTL_W8(MaxTxPacketSize, TxPacketMax);
-
- rtl_disable_clock_request(pdev);
-}
-
static void rtl_hw_start_8168d_4(struct rtl8169_private *tp)
{
void __iomem *ioaddr = tp->mmio_addr;
struct pci_dev *pdev = tp->pci_dev;
static const struct ephy_info e_info_8168d_4[] = {
- { 0x0b, ~0, 0x48 },
- { 0x19, 0x20, 0x50 },
- { 0x0c, ~0, 0x20 }
+ { 0x0b, 0x0000, 0x0048 },
+ { 0x19, 0x0020, 0x0050 },
+ { 0x0c, 0x0100, 0x0020 },
+ { 0x10, 0x0004, 0x0000 }
};
- int i;
rtl_csi_access_enable_1(tp);
- rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
+ if (tp->dev->mtu <= ETH_DATA_LEN)
+ rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
RTL_W8(MaxTxPacketSize, TxPacketMax);
- for (i = 0; i < ARRAY_SIZE(e_info_8168d_4); i++) {
- const struct ephy_info *e = e_info_8168d_4 + i;
- u16 w;
-
- w = rtl_ephy_read(tp, e->offset);
- rtl_ephy_write(tp, 0x03, (w & e->mask) | e->bits);
- }
+ rtl_ephy_init(tp, e_info_8168d_4, ARRAY_SIZE(e_info_8168d_4));
rtl_enable_clock_request(pdev);
}
@@ -6328,11 +6308,8 @@ static void rtl_hw_start_8168(struct net_device *dev)
break;
case RTL_GIGA_MAC_VER_28:
- rtl_hw_start_8168d_4(tp);
- break;
-
case RTL_GIGA_MAC_VER_31:
- rtl_hw_start_8168dp(tp);
+ rtl_hw_start_8168d_4(tp);
break;
case RTL_GIGA_MAC_VER_32:
--
1.9.1
next prev parent reply other threads:[~2014-12-09 16:46 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-09 16:45 [PATCH net-next 0/9] r8169:update hardware ephy parameter Chunhao Lin
2014-12-09 16:45 ` [PATCH net-next 1/9] r8169:update rtl8168g " Chunhao Lin
2014-12-09 16:45 ` [PATCH net-next 2/9] r8169:update rtl8168gu " Chunhao Lin
2014-12-09 16:45 ` [PATCH net-next 3/9] r8169:update rtl8411b " Chunhao Lin
2014-12-09 16:45 ` [PATCH net-next 4/9] r8169:update rtl8411 " Chunhao Lin
2014-12-09 16:45 ` [PATCH net-next 5/9] r8169:update rtl8168fb " Chunhao Lin
2014-12-09 23:48 ` Francois Romieu
2014-12-09 16:46 ` [PATCH net-next 6/9] r8169:update rtl8168e-vl " Chunhao Lin
2014-12-09 16:46 ` Chunhao Lin [this message]
2014-12-09 23:50 ` [PATCH net-next 7/9] r8169:update rtl8168dp " Francois Romieu
2014-12-09 16:46 ` [PATCH net-next 8/9] r8169:update rtl8105e " Chunhao Lin
2014-12-09 16:46 ` [PATCH net-next 9/9] r8169:update rtl8402 " Chunhao Lin
2014-12-09 23:35 ` [PATCH net-next 0/9] r8169:update hardware " David Miller
2014-12-10 7:17 ` Hau
2014-12-09 23:47 ` Francois Romieu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1418143563-7652-8-git-send-email-hau@realtek.com \
--to=hau@realtek.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nic_swsd@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox