From: Fugang Duan <b38611@freescale.com>
To: <shawn.guo@linaro.org>, <davem@davemloft.net>
Cc: <netdev@vger.kernel.org>, <bhutchings@solarflare.com>,
<stephen@networkplumber.org>, <b38611@freescale.com>
Subject: [PATCH net-next v1 2/3] ARM: imx: add FEC sleep mode callback function
Date: Wed, 24 Dec 2014 17:30:40 +0800 [thread overview]
Message-ID: <1419413441-3406-3-git-send-email-b38611@freescale.com> (raw)
In-Reply-To: <1419413441-3406-1-git-send-email-b38611@freescale.com>
i.MX6q/dl, i.MX6SX SOCs enet support sleep mode that magic packet can
wake up system in suspend status. For different SOCs, there have some
SOC specifical GPR register to set sleep on/off mode. So add these to
callback function for driver.
Signed-off-by: Fugang Duan <B38611@freescale.com>
---
arch/arm/mach-imx/mach-imx6q.c | 41 +++++++++++++++++++++++++++++++-
arch/arm/mach-imx/mach-imx6sx.c | 50 +++++++++++++++++++++++++++++++++++++++
2 files changed, 90 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 5057d61..2f76168 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -31,6 +31,8 @@
#include <linux/micrel_phy.h>
#include <linux/mfd/syscon.h>
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
+#include <linux/fec.h>
+#include <linux/netdevice.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/system_misc.h>
@@ -39,6 +41,35 @@
#include "cpuidle.h"
#include "hardware.h"
+static struct fec_platform_data fec_pdata;
+
+static void imx6q_fec_sleep_enable(int enabled)
+{
+ struct regmap *gpr;
+
+ gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
+ if (!IS_ERR(gpr)) {
+ if (enabled)
+ regmap_update_bits(gpr, IOMUXC_GPR13,
+ IMX6Q_GPR13_ENET_STOP_REQ,
+ IMX6Q_GPR13_ENET_STOP_REQ);
+
+ else
+ regmap_update_bits(gpr, IOMUXC_GPR13,
+ IMX6Q_GPR13_ENET_STOP_REQ, 0);
+ } else
+ pr_err("failed to find fsl,imx6q-iomux-gpr regmap\n");
+}
+
+static void __init imx6q_enet_plt_init(void)
+{
+ struct device_node *np;
+
+ np = of_find_node_by_path("/soc/aips-bus@02100000/ethernet@02188000");
+ if (np && of_get_property(np, "fsl,magic-packet", NULL))
+ fec_pdata.sleep_mode_enable = imx6q_fec_sleep_enable;
+}
+
/* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
static int ksz9021rn_phy_fixup(struct phy_device *phydev)
{
@@ -261,6 +292,12 @@ static void __init imx6q_axi_init(void)
}
}
+/* Add auxdata to pass platform data */
+static const struct of_dev_auxdata imx6q_auxdata_lookup[] __initconst = {
+ OF_DEV_AUXDATA("fsl,imx6q-fec", 0x02188000, NULL, &fec_pdata),
+ { /* sentinel */ }
+};
+
static void __init imx6q_init_machine(void)
{
struct device *parent;
@@ -274,11 +311,13 @@ static void __init imx6q_init_machine(void)
imx6q_enet_phy_init();
- of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
+ of_platform_populate(NULL, of_default_bus_match_table,
+ imx6q_auxdata_lookup, parent);
imx_anatop_init();
cpu_is_imx6q() ? imx6q_pm_init() : imx6dl_pm_init();
imx6q_1588_init();
+ imx6q_enet_plt_init();
imx6q_axi_init();
}
diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c
index 7a96c65..747b012 100644
--- a/arch/arm/mach-imx/mach-imx6sx.c
+++ b/arch/arm/mach-imx/mach-imx6sx.c
@@ -12,12 +12,62 @@
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
+#include <linux/fec.h>
+#include <linux/netdevice.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "common.h"
#include "cpuidle.h"
+static struct fec_platform_data fec_pdata[2];
+
+static void imx6sx_fec1_sleep_enable(int enabled)
+{
+ struct regmap *gpr;
+
+ gpr = syscon_regmap_lookup_by_compatible("fsl,imx6sx-iomuxc-gpr");
+ if (!IS_ERR(gpr)) {
+ if (enabled)
+ regmap_update_bits(gpr, IOMUXC_GPR4,
+ IMX6SX_GPR4_FEC_ENET1_STOP_REQ,
+ IMX6SX_GPR4_FEC_ENET1_STOP_REQ);
+ else
+ regmap_update_bits(gpr, IOMUXC_GPR4,
+ IMX6SX_GPR4_FEC_ENET1_STOP_REQ, 0);
+ } else
+ pr_err("failed to find fsl,imx6sx-iomux-gpr regmap\n");
+}
+
+static void imx6sx_fec2_sleep_enable(int enabled)
+{
+ struct regmap *gpr;
+
+ gpr = syscon_regmap_lookup_by_compatible("fsl,imx6sx-iomuxc-gpr");
+ if (!IS_ERR(gpr)) {
+ if (enabled)
+ regmap_update_bits(gpr, IOMUXC_GPR4,
+ IMX6SX_GPR4_FEC_ENET2_STOP_REQ,
+ IMX6SX_GPR4_FEC_ENET2_STOP_REQ);
+ else
+ regmap_update_bits(gpr, IOMUXC_GPR4,
+ IMX6SX_GPR4_FEC_ENET2_STOP_REQ, 0);
+ } else
+ pr_err("failed to find fsl,imx6sx-iomux-gpr regmap\n");
+}
+
+static void __init imx6sx_enet_plt_init(void)
+{
+ struct device_node *np;
+
+ np = of_find_node_by_path("/soc/aips-bus@02100000/ethernet@02188000");
+ if (np && of_get_property(np, "fsl,magic-packet", NULL))
+ fec_pdata[0].sleep_mode_enable = imx6sx_fec1_sleep_enable;
+ np = of_find_node_by_path("/soc/aips-bus@02100000/ethernet@021b4000");
+ if (np && of_get_property(np, "fsl,magic-packet", NULL))
+ fec_pdata[1].sleep_mode_enable = imx6sx_fec2_sleep_enable;
+}
+
static int ar8031_phy_fixup(struct phy_device *dev)
{
u16 val;
--
1.7.8
next prev parent reply other threads:[~2014-12-24 10:06 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-24 9:30 [PATCH net-next v1 0/3] net: fec: add Wake-on-LAN support Fugang Duan
2014-12-24 9:30 ` [PATCH net-next v1 1/3] " Fugang Duan
2014-12-24 9:30 ` Fugang Duan [this message]
2015-01-06 11:48 ` [PATCH net-next v1 2/3] ARM: imx: add FEC sleep mode callback function Shawn Guo
2015-01-07 1:41 ` fugang.duan
2015-01-07 2:33 ` Shawn Guo
2015-01-07 2:40 ` fugang.duan
2015-01-07 3:17 ` Shawn Guo
2015-01-07 12:02 ` David Miller
2015-01-07 3:44 ` Fabio Estevam
2014-12-24 9:30 ` [PATCH net-next v1 3/3] ARM: dts: imx6qdl: enable FEC magic-packet feature Fugang Duan
2014-12-31 18:07 ` [PATCH net-next v1 0/3] net: fec: add Wake-on-LAN support David Miller
2014-12-31 19:03 ` Fabio Estevam
2014-12-31 19:20 ` David Miller
2014-12-31 19:22 ` Fabio Estevam
2015-01-04 1:39 ` fugang.duan
2015-01-06 11:21 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1419413441-3406-3-git-send-email-b38611@freescale.com \
--to=b38611@freescale.com \
--cc=bhutchings@solarflare.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=shawn.guo@linaro.org \
--cc=stephen@networkplumber.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).