From: Roger Chen <roger.chen@rock-chips.com>
To: heiko@sntech.de
Cc: peppe.cavallaro@st.com, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org,
kever.yang@rock-chips.com, eddie.cai@rock-chips.com,
roger.chen@rock-chips.com
Subject: [PATCH v3 4/6] ARM: dts: rockchip: add gmac info for rk3288
Date: Mon, 29 Dec 2014 17:44:16 +0800 [thread overview]
Message-ID: <1419846256-14675-1-git-send-email-roger.chen@rock-chips.com> (raw)
In-Reply-To: <1419846152-14531-1-git-send-email-roger.chen@rock-chips.com>
add gmac info in rk3288.dtsi for GMAC driver
changes since v2:
1. add drive-strength in the pinctrl settings
Signed-off-by: Roger Chen <roger.chen@rock-chips.com>
---
arch/arm/boot/dts/rk3288.dtsi | 54 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 54 insertions(+)
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 0f50d5d..5a26db0 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -358,6 +358,22 @@
status = "disabled";
};
+ gmac: ethernet@ff290000 {
+ compatible = "rockchip,rk3288-gmac";
+ reg = <0xff290000 0x10000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ rockchip,grf = <&grf>;
+ clocks = <&cru SCLK_MAC>,
+ <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>,
+ <&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>,
+ <&cru ACLK_GMAC>, <&cru PCLK_GMAC>;
+ clock-names = "stmmaceth",
+ "mac_clk_rx", "mac_clk_tx",
+ "clk_mac_ref", "clk_mac_refout",
+ "aclk_mac", "pclk_mac";
+ };
+
usb_host0_ehci: usb@ff500000 {
compatible = "generic-ehci";
reg = <0xff500000 0x100>;
@@ -703,6 +719,11 @@
bias-disable;
};
+ pcfg_pull_none_12ma: pcfg-pull-none-12ma {
+ bias-disable;
+ drive-strength = <12>;
+ };
+
i2c0 {
i2c0_xfer: i2c0-xfer {
rockchip,pins = <0 15 RK_FUNC_1 &pcfg_pull_none>,
@@ -1040,5 +1061,38 @@
rockchip,pins = <7 23 3 &pcfg_pull_none>;
};
};
+
+ gmac {
+ rgmii_pins: rgmii-pins {
+ rockchip,pins = <3 30 3 &pcfg_pull_none>,
+ <3 31 3 &pcfg_pull_none>,
+ <3 26 3 &pcfg_pull_none>,
+ <3 27 3 &pcfg_pull_none>,
+ <3 28 3 &pcfg_pull_none_12ma>,
+ <3 29 3 &pcfg_pull_none_12ma>,
+ <3 24 3 &pcfg_pull_none_12ma>,
+ <3 25 3 &pcfg_pull_none_12ma>,
+ <4 0 3 &pcfg_pull_none>,
+ <4 5 3 &pcfg_pull_none>,
+ <4 6 3 &pcfg_pull_none>,
+ <4 9 3 &pcfg_pull_none_12ma>,
+ <4 4 3 &pcfg_pull_none_12ma>,
+ <4 1 3 &pcfg_pull_none>,
+ <4 3 3 &pcfg_pull_none>;
+ };
+
+ rmii_pins: rmii-pins {
+ rockchip,pins = <3 30 3 &pcfg_pull_none>,
+ <3 31 3 &pcfg_pull_none>,
+ <3 28 3 &pcfg_pull_none>,
+ <3 29 3 &pcfg_pull_none>,
+ <4 0 3 &pcfg_pull_none>,
+ <4 5 3 &pcfg_pull_none>,
+ <4 4 3 &pcfg_pull_none>,
+ <4 1 3 &pcfg_pull_none>,
+ <4 2 3 &pcfg_pull_none>,
+ <4 3 3 &pcfg_pull_none>;
+ };
+ };
};
};
--
1.7.9.5
next prev parent reply other threads:[~2014-12-29 9:44 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-29 9:42 [PATCH v3 0/6] support GMAC driver for RK3288 Roger Chen
2014-12-29 9:43 ` [PATCH v3 1/6] GMAC: add driver for Rockchip RK3288 SoCs integrated GMAC Roger Chen
2014-12-29 9:43 ` [PATCH v3 2/6] GMAC: define clock ID used for GMAC Roger Chen
2014-12-29 9:44 ` [PATCH v3 3/6] GMAC: modify CRU config for Rockchip RK3288 SoCs integrated GMAC Roger Chen
2014-12-29 9:44 ` Roger Chen [this message]
2014-12-29 9:44 ` [PATCH v3 5/6] ARM: dts: rockchip: enable gmac on RK3288 evb board Roger Chen
2014-12-29 9:44 ` [PATCH v3 6/6] GMAC: add document for Rockchip RK3288 GMAC Roger Chen
2015-01-01 0:15 ` [PATCH v3 0/6] support GMAC driver for RK3288 David Miller
2015-01-01 2:06 ` Heiko Stübner
2015-01-02 2:01 ` David Miller
2015-01-03 22:27 ` Heiko Stübner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1419846256-14675-1-git-send-email-roger.chen@rock-chips.com \
--to=roger.chen@rock-chips.com \
--cc=eddie.cai@rock-chips.com \
--cc=heiko@sntech.de \
--cc=kever.yang@rock-chips.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).