netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Roger Chen <roger.chen@rock-chips.com>
To: heiko@sntech.de
Cc: peppe.cavallaro@st.com, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org,
	kever.yang@rock-chips.com, eddie.cai@rock-chips.com,
	roger.chen@rock-chips.com
Subject: [PATCH v3 5/6] ARM: dts: rockchip: enable gmac on RK3288 evb board
Date: Mon, 29 Dec 2014 17:44:25 +0800	[thread overview]
Message-ID: <1419846265-14711-1-git-send-email-roger.chen@rock-chips.com> (raw)
In-Reply-To: <1419846152-14531-1-git-send-email-roger.chen@rock-chips.com>

enable gmac in rk3288-evb-rk808.dts

changes since v2:
1. add fixed regulator for PHY
2. remove power-gpio, reset-gpio, phyirq-gpio, pmu_regulator setting
3. add "snps,reset-gpio", "snps,reset-active-low;" "snps,reset-delays-us"

Signed-off-by: Roger Chen <roger.chen@rock-chips.com>
---
 arch/arm/boot/dts/rk3288-evb-rk808.dts |   23 +++++++++++++++++++++++
 arch/arm/boot/dts/rk3288-evb.dtsi      |   17 +++++++++++++++++
 2 files changed, 40 insertions(+)

diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts
index d8c775e6..831a7aa 100644
--- a/arch/arm/boot/dts/rk3288-evb-rk808.dts
+++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts
@@ -15,6 +15,13 @@
 
 / {
 	compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288";
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+		#clock-cells = <0>;
+	};
 };
 
 &cpu0 {
@@ -152,3 +159,19 @@
 		};
 	};
 };
+
+&gmac {
+	phy_regulator = "vcc_phy";
+	phy-mode = "rgmii";
+	clock_in_out = "input";
+	snps,reset-gpio = <&gpio4 7 0>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "ok";
+};
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index cb83cea..fe1d13c 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -90,6 +90,17 @@
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&eth_phy_pwr>;
+		regulator-name = "vcc_phy";
+		regulator-always-on;
+		regulator-boot-on;
+	};
 };
 
 &emmc {
@@ -172,6 +183,12 @@
 			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	eth_phy {
+		eth_phy_pwr: eth-phy-pwr {
+			rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
 
 &usb_host0_ehci {
-- 
1.7.9.5

  parent reply	other threads:[~2014-12-29  9:44 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-29  9:42 [PATCH v3 0/6] support GMAC driver for RK3288 Roger Chen
2014-12-29  9:43 ` [PATCH v3 1/6] GMAC: add driver for Rockchip RK3288 SoCs integrated GMAC Roger Chen
2014-12-29  9:43 ` [PATCH v3 2/6] GMAC: define clock ID used for GMAC Roger Chen
2014-12-29  9:44 ` [PATCH v3 3/6] GMAC: modify CRU config for Rockchip RK3288 SoCs integrated GMAC Roger Chen
2014-12-29  9:44 ` [PATCH v3 4/6] ARM: dts: rockchip: add gmac info for rk3288 Roger Chen
2014-12-29  9:44 ` Roger Chen [this message]
2014-12-29  9:44 ` [PATCH v3 6/6] GMAC: add document for Rockchip RK3288 GMAC Roger Chen
2015-01-01  0:15 ` [PATCH v3 0/6] support GMAC driver for RK3288 David Miller
2015-01-01  2:06   ` Heiko Stübner
2015-01-02  2:01     ` David Miller
2015-01-03 22:27       ` Heiko Stübner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1419846265-14711-1-git-send-email-roger.chen@rock-chips.com \
    --to=roger.chen@rock-chips.com \
    --cc=eddie.cai@rock-chips.com \
    --cc=heiko@sntech.de \
    --cc=kever.yang@rock-chips.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=netdev@vger.kernel.org \
    --cc=peppe.cavallaro@st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).